andrey
/
Marlin_FB4S
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
Browse Source

Merge pull request #9439 from thinkyhead/bf2_fix_G26_circle_bumps 

[2.0.x] Change G26 circle angles
pull/1/head
Scott Lahteine 6 years ago
committed by GitHub
parent
b939a2e88c e6cdc438fd
commit
03bfc0d7c8
No known key found for this signature in database GPG Key ID: 4AEE18F83AFDEB23
1 changed files with 46 additions and 71 deletions
Whitespace
Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL
Split View
Diff Options
Show Stats Download Patch File Download Diff File
  1. 117
      Marlin/src/gcode/bedlevel/G26.cpp

117
Marlin/src/gcode/bedlevel/G26.cpp
View File

@ -46,11 +46,11 @@
#define PRIME_LENGTH 10.0
#define OOZE_AMOUNT 0.3
#define SIZE_OF_INTERSECTION_CIRCLES 5
#define SIZE_OF_CROSSHAIRS 3
#define INTERSECTION_CIRCLE_RADIUS 5
#define CROSSHAIRS_SIZE 3
#if SIZE_OF_CROSSHAIRS >= SIZE_OF_INTERSECTION_CIRCLES
#error "SIZE_OF_CROSSHAIRS must be less than SIZE_OF_INTERSECTION_CIRCLES."
#if CROSSHAIRS_SIZE >= INTERSECTION_CIRCLE_RADIUS
#error "CROSSHAIRS_SIZE must be less than INTERSECTION_CIRCLE_RADIUS."
#endif
#define G26_OK false
@ -305,7 +305,7 @@ void print_line_from_here_to_there(const float &sx, const float &sy, const float
// If the end point of the line is closer to the nozzle, flip the direction,
// moving from the end to the start. On very small lines the optimization isn't worth it.
if (dist_end < dist_start && (SIZE_OF_INTERSECTION_CIRCLES) < FABS(line_length))
if (dist_end < dist_start && (INTERSECTION_CIRCLE_RADIUS) < FABS(line_length))
return print_line_from_here_to_there(ex, ey, ez, sx, sy, sz);
// Decide whether to retract & bump
@ -345,8 +345,8 @@ inline bool look_for_lines_to_connect() {
// We found two circles that need a horizontal line to connect them
// Print it!
//
sx = _GET_MESH_X( i ) + (SIZE_OF_INTERSECTION_CIRCLES - (SIZE_OF_CROSSHAIRS)); // right edge
ex = _GET_MESH_X(i + 1) - (SIZE_OF_INTERSECTION_CIRCLES - (SIZE_OF_CROSSHAIRS)); // left edge
sx = _GET_MESH_X( i ) + (INTERSECTION_CIRCLE_RADIUS - (CROSSHAIRS_SIZE)); // right edge
ex = _GET_MESH_X(i + 1) - (INTERSECTION_CIRCLE_RADIUS - (CROSSHAIRS_SIZE)); // left edge
sx = constrain(sx, X_MIN_POS + 1, X_MAX_POS - 1);
sy = ey = constrain(_GET_MESH_Y(j), Y_MIN_POS + 1, Y_MAX_POS - 1);
@ -378,8 +378,8 @@ inline bool look_for_lines_to_connect() {
// We found two circles that need a vertical line to connect them
// Print it!
//
sy = _GET_MESH_Y( j ) + (SIZE_OF_INTERSECTION_CIRCLES - (SIZE_OF_CROSSHAIRS)); // top edge
ey = _GET_MESH_Y(j + 1) - (SIZE_OF_INTERSECTION_CIRCLES - (SIZE_OF_CROSSHAIRS)); // bottom edge
sy = _GET_MESH_Y( j ) + (INTERSECTION_CIRCLE_RADIUS - (CROSSHAIRS_SIZE)); // top edge
ey = _GET_MESH_Y(j + 1) - (INTERSECTION_CIRCLE_RADIUS - (CROSSHAIRS_SIZE)); // bottom edge
sx = ex = constrain(_GET_MESH_X(i), X_MIN_POS + 1, X_MAX_POS - 1);
sy = constrain(sy, Y_MIN_POS + 1, Y_MAX_POS - 1);
@ -550,9 +550,6 @@ float valid_trig_angle(float d) {
*/
void GcodeSuite::G26() {
SERIAL_ECHOLNPGM("G26 command started. Waiting for heater(s).");
float tmp, start_angle, end_angle;
int i, xi, yi;
mesh_index_pair location;
// Don't allow Mesh Validation without homing first,
// or if the parameter parsing did not go OK, abort
@ -686,12 +683,9 @@ void GcodeSuite::G26() {
set_bed_leveling_enabled(!parser.seen('D'));
if (current_position[Z_AXIS] < Z_CLEARANCE_BETWEEN_PROBES) {
// SERIAL_PROTOCOLLNPGM("! move nozzle to Z_CLEARANCE_BETWEEN_PROBES height.");
// SERIAL_ECHOLNPAIR(" Z at:", current_position[Z_AXIS]);
do_blocking_move_to_z(Z_CLEARANCE_BETWEEN_PROBES);
stepper.synchronize();
set_current_from_destination();
// SERIAL_ECHOLNPAIR(" Z now at:", current_position[Z_AXIS]);
}
if (turn_on_heaters() != G26_OK) goto LEAVE;
@ -699,7 +693,7 @@ void GcodeSuite::G26() {
current_position[E_AXIS] = 0.0;
sync_plan_position_e();
if (g26_prime_flag && prime_nozzle()) goto LEAVE;
if (g26_prime_flag && prime_nozzle() != G26_OK) goto LEAVE;
/**
* Bed is preheated
@ -717,14 +711,8 @@ void GcodeSuite::G26() {
// Move nozzle to the specified height for the first layer
set_destination_from_current();
//SERIAL_PROTOCOLLNPGM("! moving nozzle to 1st layer height.");
//SERIAL_ECHOLNPAIR(" Z1 at:", current_position[Z_AXIS]);
destination[Z_AXIS] = g26_layer_height;
move_to(destination, 0.0);
//stepper.synchronize();
//set_destination_from_current();
//SERIAL_ECHOLNPAIR(" Z2 at:", current_position[Z_AXIS]);
move_to(destination, g26_ooze_amount);
#if ENABLED(ULTRA_LCD)
@ -734,17 +722,18 @@ void GcodeSuite::G26() {
//debug_current_and_destination(PSTR("Starting G26 Mesh Validation Pattern."));
/**
* Declare and generate a sin() & cos() table to be used during the circle drawing. This will lighten
* the CPU load and make the arc drawing faster and more smooth
* Pre-generate radius offset values at 30 degree intervals to reduce CPU load.
* All angles are offset by 15 degrees to allow for a smaller table.
*/
float sin_table[360 / 30 + 1], cos_table[360 / 30 + 1];
for (i = 0; i <= 360 / 30; i++) {
cos_table[i] = SIZE_OF_INTERSECTION_CIRCLES * cos(RADIANS(valid_trig_angle(i * 30.0)));
sin_table[i] = SIZE_OF_INTERSECTION_CIRCLES * sin(RADIANS(valid_trig_angle(i * 30.0)));
}
#define A_CNT ((360 / 30) / 2)
#define _COS(A) (trig_table[((N + A_CNT * 8) % A_CNT)] * (A >= A_CNT ? -1 : 1))
#define _SIN(A) (-_COS((A + A_CNT / 2) % (A_CNT * 2)))
float trig_table[A_CNT];
for (uint8_t i = 0; i < A_CNT; i++)
trig_table[i] = INTERSECTION_CIRCLE_RADIUS * cos(RADIANS(i * 30 + 15));
do {
location = g26_continue_with_closest
const mesh_index_pair location = g26_continue_with_closest
? find_closest_circle_to_print(current_position[X_AXIS], current_position[Y_AXIS])
: find_closest_circle_to_print(g26_x_pos, g26_y_pos); // Find the closest Mesh Intersection to where we are now.
@ -753,12 +742,29 @@ void GcodeSuite::G26() {
circle_y = _GET_MESH_Y(location.y_index);
// If this mesh location is outside the printable_radius, skip it.
if (!position_is_reachable(circle_x, circle_y)) continue;
xi = location.x_index; // Just to shrink the next few lines and make them easier to understand
yi = location.y_index;
// Determine where to start and end the circle,
// which is always drawn counter-clockwise.
const uint8_t xi = location.x_index, yi = location.y_index;
const bool f = yi == 0, r = xi == GRID_MAX_POINTS_X - 1, b = yi == GRID_MAX_POINTS_Y - 1;
int8_t start_ind = -2, end_ind = 10; // Assume a full circle (from 4:30 to 4:30)
if (xi == 0) { // Left edge? Just right half.
start_ind = f ? 0 : -3; // 05:30 (02:30 for front-left)
end_ind = b ? -1 : 2; // 12:30 (03:30 for back-left)
}
else if (r) { // Right edge? Just left half.
start_ind = f ? 5 : 3; // 11:30 (09:30 for front-right)
end_ind = b ? 6 : 8; // 06:30 (08:30 for back-right)
}
else if (f) { // Front edge? Just back half.
start_ind = 0; // 02:30
end_ind = 5; // 09:30
}
else if (b) { // Back edge? Just front half.
start_ind = 6; // 08:30
end_ind = 11; // 03:30
}
if (g26_debug_flag) {
SERIAL_ECHOPAIR(" Doing circle at: (xi=", xi);
SERIAL_ECHOPAIR(", yi=", yi);
@ -766,47 +772,17 @@ void GcodeSuite::G26() {
SERIAL_EOL();
}
start_angle = 0.0; // assume it is going to be a full circle
end_angle = 360.0;
if (xi == 0) { // Check for bottom edge
start_angle = -90.0;
end_angle = 90.0;
if (yi == 0) // it is an edge, check for the two left corners
start_angle = 0.0;
else if (yi == GRID_MAX_POINTS_Y - 1)
end_angle = 0.0;
}
else if (xi == GRID_MAX_POINTS_X - 1) { // Check for top edge
start_angle = 90.0;
end_angle = 270.0;
if (yi == 0) // it is an edge, check for the two right corners
end_angle = 180.0;
else if (yi == GRID_MAX_POINTS_Y - 1)
start_angle = 180.0;
}
else if (yi == 0) {
start_angle = 0.0; // only do the top side of the cirlce
end_angle = 180.0;
}
else if (yi == GRID_MAX_POINTS_Y - 1) {
start_angle = 180.0; // only do the bottom side of the cirlce
end_angle = 360.0;
}
for (tmp = start_angle; tmp < end_angle - 0.1; tmp += 30.0) {
for (int8_t ind = start_ind; ind < end_ind; ind++) {
#if ENABLED(NEWPANEL)
if (user_canceled()) goto LEAVE; // Check if the user wants to stop the Mesh Validation
if (user_canceled()) goto LEAVE; // Check if the user wants to stop the Mesh Validation
#endif
int tmp_div_30 = tmp / 30.0;
if (tmp_div_30 < 0) tmp_div_30 += 360 / 30;
if (tmp_div_30 > 11) tmp_div_30 -= 360 / 30;
float rx = circle_x + _COS(ind), // For speed, these are now a lookup table entry
ry = circle_y + _SIN(ind),
xe = circle_x + _COS(ind + 1),
ye = circle_y + _SIN(ind + 1);
float rx = circle_x + cos_table[tmp_div_30], // for speed, these are now a lookup table entry
ry = circle_y + sin_table[tmp_div_30],
xe = circle_x + cos_table[tmp_div_30 + 1],
ye = circle_y + sin_table[tmp_div_30 + 1];
#if IS_KINEMATIC
// Check to make sure this segment is entirely on the bed, skip if not.
if (!position_is_reachable(rx, ry) || !position_is_reachable(xe, ye)) continue;
@ -832,7 +808,6 @@ void GcodeSuite::G26() {
MYSERIAL0.flush(); // G26 takes a long time to complete. PronterFace can
// over run the serial character buffer with M105's without
// this fix
}
if (look_for_lines_to_connect())
goto LEAVE;

Write Preview
Loading…
Cancel
Save