Browse Source

Handle runout in runout.cpp

pull/1/head
Scott Lahteine 5 years ago
parent
commit
0322348924
  1. 2
      Marlin/src/HAL/HAL_LPC1768/main.cpp
  2. 2
      Marlin/src/HAL/HAL_STM32F1/HAL.cpp
  3. 69
      Marlin/src/Marlin.cpp
  4. 4
      Marlin/src/Marlin.h
  5. 75
      Marlin/src/feature/runout.cpp
  6. 2
      Marlin/src/feature/runout.h
  7. 23
      Marlin/src/gcode/feature/pause/M701_M702.cpp

2
Marlin/src/HAL/HAL_LPC1768/main.cpp

@ -155,7 +155,7 @@ void HAL_idletask() {
// a PC via USB.
// Other HALs use IS_SD_PRINTING() and IS_SD_FILE_OPEN() to check for access but
// this will not reliably detect delete operations. To be safe we will lock
// the disk if Marlin has it mounted. Unfortuately there is currently no way
// the disk if Marlin has it mounted. Unfortunately there is currently no way
// to unmount the disk from the LCD menu.
// if (IS_SD_PRINTING() || IS_SD_FILE_OPEN())
if (card.isMounted())

2
Marlin/src/HAL/HAL_STM32F1/HAL.cpp

@ -233,7 +233,7 @@ void HAL_idletask() {
// a PC via USB.
// Other HALs use IS_SD_PRINTING() and IS_SD_FILE_OPEN() to check for access but
// this will not reliably detect delete operations. To be safe we will lock
// the disk if Marlin has it mounted. Unfortuately there is currently no way
// the disk if Marlin has it mounted. Unfortunately there is currently no way
// to unmount the disk from the LCD menu.
// if (IS_SD_PRINTING() || IS_SD_FILE_OPEN())
/* copy from lpc1768 framework, should be fixed later for process SHARED_SD_CARD*/

69
Marlin/src/Marlin.cpp

@ -173,10 +173,6 @@
#include "feature/prusa_MMU2/mmu2.h"
#endif
#if ENABLED(EXTENSIBLE_UI)
#include "lcd/extensible_ui/ui_api.h"
#endif
#if HAS_DRIVER(L6470)
#include "libs/L6470/L6470_Marlin.h"
#endif
@ -330,71 +326,6 @@ void disable_all_steppers() {
disable_e_steppers();
}
#if HAS_FILAMENT_SENSOR
void event_filament_runout() {
#if ENABLED(ADVANCED_PAUSE_FEATURE)
if (did_pause_print) return; // Action already in progress. Purge triggered repeated runout.
#endif
#if ENABLED(EXTENSIBLE_UI)
ExtUI::onFilamentRunout(ExtUI::getActiveTool());
#endif
#if EITHER(HOST_PROMPT_SUPPORT, HOST_ACTION_COMMANDS)
const char tool = '0'
#if NUM_RUNOUT_SENSORS > 1
+ active_extruder
#endif
;
#endif
//action:out_of_filament
#if ENABLED(HOST_PROMPT_SUPPORT)
host_prompt_reason = PROMPT_FILAMENT_RUNOUT;
host_action_prompt_end();
host_action_prompt_begin(PSTR("FilamentRunout T"), false);
SERIAL_CHAR(tool);
SERIAL_EOL();
host_action_prompt_show();
#endif
const bool run_runout_script = !runout.host_handling;
#if ENABLED(HOST_ACTION_COMMANDS)
if (run_runout_script
&& ( strstr(FILAMENT_RUNOUT_SCRIPT, "M600")
|| strstr(FILAMENT_RUNOUT_SCRIPT, "M125")
#if ENABLED(ADVANCED_PAUSE_FEATURE)
|| strstr(FILAMENT_RUNOUT_SCRIPT, "M25")
#endif
)
) {
host_action_paused(false);
}
else {
// Legacy Repetier command for use until newer version supports standard dialog
// To be removed later when pause command also triggers dialog
#ifdef ACTION_ON_FILAMENT_RUNOUT
host_action(PSTR(ACTION_ON_FILAMENT_RUNOUT " T"), false);
SERIAL_CHAR(tool);
SERIAL_EOL();
#endif
host_action_pause(false);
}
SERIAL_ECHOPGM(" " ACTION_REASON_ON_FILAMENT_RUNOUT " ");
SERIAL_CHAR(tool);
SERIAL_EOL();
#endif // HOST_ACTION_COMMANDS
if (run_runout_script)
queue.inject_P(PSTR(FILAMENT_RUNOUT_SCRIPT));
}
#endif // HAS_FILAMENT_SENSOR
#if ENABLED(G29_RETRY_AND_RECOVER)
void event_probe_failure() {

4
Marlin/src/Marlin.h

@ -371,10 +371,6 @@ void protected_pin_err();
inline void suicide() { OUT_WRITE(SUICIDE_PIN, LOW); }
#endif
#if HAS_FILAMENT_SENSOR
void event_filament_runout();
#endif
#if ENABLED(G29_RETRY_AND_RECOVER)
void event_probe_recover();
void event_probe_failure();

75
Marlin/src/feature/runout.cpp

@ -58,4 +58,79 @@ void FilamentSensorBase::filament_present(const uint8_t extruder) {
int8_t RunoutResponseDebounced::runout_count; // = 0
#endif
//
// Filament Runout event handler
//
#include "../Marlin.h"
#include "../gcode/queue.h"
#if ENABLED(HOST_ACTION_COMMANDS)
#include "host_actions.h"
#endif
#if ENABLED(EXTENSIBLE_UI)
#include "../lcd/extensible_ui/ui_api.h"
#endif
void event_filament_runout() {
#if ENABLED(ADVANCED_PAUSE_FEATURE)
if (did_pause_print) return; // Action already in progress. Purge triggered repeated runout.
#endif
#if ENABLED(EXTENSIBLE_UI)
ExtUI::onFilamentRunout(ExtUI::getActiveTool());
#endif
#if EITHER(HOST_PROMPT_SUPPORT, HOST_ACTION_COMMANDS)
const char tool = '0'
#if NUM_RUNOUT_SENSORS > 1
+ active_extruder
#endif
;
#endif
//action:out_of_filament
#if ENABLED(HOST_PROMPT_SUPPORT)
host_prompt_reason = PROMPT_FILAMENT_RUNOUT;
host_action_prompt_end();
host_action_prompt_begin(PSTR("FilamentRunout T"), false);
SERIAL_CHAR(tool);
SERIAL_EOL();
host_action_prompt_show();
#endif
const bool run_runout_script = !runout.host_handling;
#if ENABLED(HOST_ACTION_COMMANDS)
if (run_runout_script
&& ( strstr(FILAMENT_RUNOUT_SCRIPT, "M600")
|| strstr(FILAMENT_RUNOUT_SCRIPT, "M125")
#if ENABLED(ADVANCED_PAUSE_FEATURE)
|| strstr(FILAMENT_RUNOUT_SCRIPT, "M25")
#endif
)
) {
host_action_paused(false);
}
else {
// Legacy Repetier command for use until newer version supports standard dialog
// To be removed later when pause command also triggers dialog
#ifdef ACTION_ON_FILAMENT_RUNOUT
host_action(PSTR(ACTION_ON_FILAMENT_RUNOUT " T"), false);
SERIAL_CHAR(tool);
SERIAL_EOL();
#endif
host_action_pause(false);
}
SERIAL_ECHOPGM(" " ACTION_REASON_ON_FILAMENT_RUNOUT " ");
SERIAL_CHAR(tool);
SERIAL_EOL();
#endif // HOST_ACTION_COMMANDS
if (run_runout_script)
queue.inject_P(PSTR(FILAMENT_RUNOUT_SCRIPT));
}
#endif // HAS_FILAMENT_SENSOR

2
Marlin/src/feature/runout.h

@ -46,6 +46,8 @@
#define FILAMENT_RUNOUT_THRESHOLD 5
#endif
void event_filament_runout();
class FilamentMonitorBase {
public:
static bool enabled, filament_ran_out;

23
Marlin/src/gcode/feature/pause/M701_M702.cpp

@ -102,15 +102,20 @@ void GcodeSuite::M701() {
#if ENABLED(PRUSA_MMU2)
mmu2.load_filament_to_nozzle(target_extruder);
#else
constexpr float slow_load_length = FILAMENT_CHANGE_SLOW_LOAD_LENGTH;
const float fast_load_length = ABS(parser.seen('L') ? parser.value_axis_units(E_AXIS)
: fc_settings[active_extruder].load_length);
load_filament(slow_load_length, fast_load_length, ADVANCED_PAUSE_PURGE_LENGTH, FILAMENT_CHANGE_ALERT_BEEPS,
true, thermalManager.still_heating(target_extruder), PAUSE_MODE_LOAD_FILAMENT
#if ENABLED(DUAL_X_CARRIAGE)
, target_extruder
#endif
);
constexpr float purge_length = ADVANCED_PAUSE_PURGE_LENGTH,
slow_load_length = FILAMENT_CHANGE_SLOW_LOAD_LENGTH;
const float fast_load_length = ABS(parser.seen('L') ? parser.value_axis_units(E_AXIS)
: fc_settings[active_extruder].load_length);
load_filament(
slow_load_length, fast_load_length, purge_length,
FILAMENT_CHANGE_ALERT_BEEPS,
true, // show_lcd
thermalManager.still_heating(target_extruder), // pause_for_user
PAUSE_MODE_LOAD_FILAMENT // pause_mode
#if ENABLED(DUAL_X_CARRIAGE)
, target_extruder // Dual X target
#endif
);
#endif
// Restore Z axis

Loading…
Cancel
Save