Browse Source

More up front option to show SD percentage

pull/1/head
Scott Lahteine 7 years ago
parent
commit
02ff12d491
  1. 3
      Marlin/Configuration_adv.h
  2. 3
      Marlin/src/config/default/Configuration_adv.h
  3. 3
      Marlin/src/config/examples/AlephObjects/TAZ4/Configuration_adv.h
  4. 3
      Marlin/src/config/examples/Anet/A6/Configuration_adv.h
  5. 3
      Marlin/src/config/examples/Anet/A8/Configuration_adv.h
  6. 3
      Marlin/src/config/examples/Azteeg/X5GT/Configuration_adv.h
  7. 3
      Marlin/src/config/examples/BQ/Hephestos/Configuration_adv.h
  8. 3
      Marlin/src/config/examples/BQ/Hephestos_2/Configuration_adv.h
  9. 3
      Marlin/src/config/examples/BQ/WITBOX/Configuration_adv.h
  10. 3
      Marlin/src/config/examples/Cartesio/Configuration_adv.h
  11. 3
      Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h
  12. 3
      Marlin/src/config/examples/Creality/CR-10S/Configuration_adv.h
  13. 3
      Marlin/src/config/examples/Felix/Configuration_adv.h
  14. 3
      Marlin/src/config/examples/FolgerTech/i3-2020/Configuration_adv.h
  15. 3
      Marlin/src/config/examples/Infitary/i3-M508/Configuration_adv.h
  16. 3
      Marlin/src/config/examples/MakerParts/Configuration_adv.h
  17. 3
      Marlin/src/config/examples/Malyan/M150/Configuration_adv.h
  18. 3
      Marlin/src/config/examples/Malyan/M200/Configuration_adv.h
  19. 3
      Marlin/src/config/examples/Micromake/C1/enhanced/Configuration_adv.h
  20. 3
      Marlin/src/config/examples/Mks/Sbase/Configuration_adv.h
  21. 3
      Marlin/src/config/examples/RigidBot/Configuration_adv.h
  22. 3
      Marlin/src/config/examples/SCARA/Configuration_adv.h
  23. 3
      Marlin/src/config/examples/Sanguinololu/Configuration_adv.h
  24. 3
      Marlin/src/config/examples/TinyBoy2/Configuration_adv.h
  25. 3
      Marlin/src/config/examples/UltiMachine/Archim2/Configuration_adv.h
  26. 3
      Marlin/src/config/examples/Velleman/K8200/Configuration_adv.h
  27. 3
      Marlin/src/config/examples/Velleman/K8400/Configuration_adv.h
  28. 3
      Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration_adv.h
  29. 3
      Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h
  30. 3
      Marlin/src/config/examples/delta/FLSUN/kossel/Configuration_adv.h
  31. 3
      Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h
  32. 3
      Marlin/src/config/examples/delta/generic/Configuration_adv.h
  33. 3
      Marlin/src/config/examples/delta/kossel_mini/Configuration_adv.h
  34. 3
      Marlin/src/config/examples/delta/kossel_pro/Configuration_adv.h
  35. 3
      Marlin/src/config/examples/delta/kossel_xl/Configuration_adv.h
  36. 3
      Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h
  37. 3
      Marlin/src/config/examples/makibox/Configuration_adv.h
  38. 3
      Marlin/src/config/examples/tvrrug/Round2/Configuration_adv.h
  39. 3
      Marlin/src/config/examples/wt150/Configuration_adv.h
  40. 2
      Marlin/src/lcd/ultralcd_impl_DOGM.h

3
Marlin/Configuration_adv.h

@ -613,6 +613,9 @@
* printing performance versus fast display updates. * printing performance versus fast display updates.
*/ */
#if ENABLED(DOGLCD) #if ENABLED(DOGLCD)
// Show SD percentage next to the progress bar
//#define DOGM_SD_PERCENT
// Enable to save many cycles by drawing a hollow frame on the Info Screen // Enable to save many cycles by drawing a hollow frame on the Info Screen
#define XYZ_HOLLOW_FRAME #define XYZ_HOLLOW_FRAME

3
Marlin/src/config/default/Configuration_adv.h

@ -613,6 +613,9 @@
* printing performance versus fast display updates. * printing performance versus fast display updates.
*/ */
#if ENABLED(DOGLCD) #if ENABLED(DOGLCD)
// Show SD percentage next to the progress bar
//#define DOGM_SD_PERCENT
// Enable to save many cycles by drawing a hollow frame on the Info Screen // Enable to save many cycles by drawing a hollow frame on the Info Screen
#define XYZ_HOLLOW_FRAME #define XYZ_HOLLOW_FRAME

3
Marlin/src/config/examples/AlephObjects/TAZ4/Configuration_adv.h

@ -613,6 +613,9 @@
* printing performance versus fast display updates. * printing performance versus fast display updates.
*/ */
#if ENABLED(DOGLCD) #if ENABLED(DOGLCD)
// Show SD percentage next to the progress bar
//#define DOGM_SD_PERCENT
// Enable to save many cycles by drawing a hollow frame on the Info Screen // Enable to save many cycles by drawing a hollow frame on the Info Screen
#define XYZ_HOLLOW_FRAME #define XYZ_HOLLOW_FRAME

3
Marlin/src/config/examples/Anet/A6/Configuration_adv.h

@ -613,6 +613,9 @@
* printing performance versus fast display updates. * printing performance versus fast display updates.
*/ */
#if ENABLED(DOGLCD) #if ENABLED(DOGLCD)
// Show SD percentage next to the progress bar
//#define DOGM_SD_PERCENT
// Enable to save many cycles by drawing a hollow frame on the Info Screen // Enable to save many cycles by drawing a hollow frame on the Info Screen
#define XYZ_HOLLOW_FRAME #define XYZ_HOLLOW_FRAME

3
Marlin/src/config/examples/Anet/A8/Configuration_adv.h

@ -613,6 +613,9 @@
* printing performance versus fast display updates. * printing performance versus fast display updates.
*/ */
#if ENABLED(DOGLCD) #if ENABLED(DOGLCD)
// Show SD percentage next to the progress bar
//#define DOGM_SD_PERCENT
// Enable to save many cycles by drawing a hollow frame on the Info Screen // Enable to save many cycles by drawing a hollow frame on the Info Screen
#define XYZ_HOLLOW_FRAME #define XYZ_HOLLOW_FRAME

3
Marlin/src/config/examples/Azteeg/X5GT/Configuration_adv.h

@ -614,6 +614,9 @@
* printing performance versus fast display updates. * printing performance versus fast display updates.
*/ */
#if ENABLED(DOGLCD) #if ENABLED(DOGLCD)
// Show SD percentage next to the progress bar
//#define DOGM_SD_PERCENT
// Enable to save many cycles by drawing a hollow frame on the Info Screen // Enable to save many cycles by drawing a hollow frame on the Info Screen
#define XYZ_HOLLOW_FRAME #define XYZ_HOLLOW_FRAME

3
Marlin/src/config/examples/BQ/Hephestos/Configuration_adv.h

@ -613,6 +613,9 @@
* printing performance versus fast display updates. * printing performance versus fast display updates.
*/ */
#if ENABLED(DOGLCD) #if ENABLED(DOGLCD)
// Show SD percentage next to the progress bar
//#define DOGM_SD_PERCENT
// Enable to save many cycles by drawing a hollow frame on the Info Screen // Enable to save many cycles by drawing a hollow frame on the Info Screen
#define XYZ_HOLLOW_FRAME #define XYZ_HOLLOW_FRAME

3
Marlin/src/config/examples/BQ/Hephestos_2/Configuration_adv.h

@ -613,6 +613,9 @@
* printing performance versus fast display updates. * printing performance versus fast display updates.
*/ */
#if ENABLED(DOGLCD) #if ENABLED(DOGLCD)
// Show SD percentage next to the progress bar
//#define DOGM_SD_PERCENT
// Enable to save many cycles by drawing a hollow frame on the Info Screen // Enable to save many cycles by drawing a hollow frame on the Info Screen
#define XYZ_HOLLOW_FRAME #define XYZ_HOLLOW_FRAME

3
Marlin/src/config/examples/BQ/WITBOX/Configuration_adv.h

@ -613,6 +613,9 @@
* printing performance versus fast display updates. * printing performance versus fast display updates.
*/ */
#if ENABLED(DOGLCD) #if ENABLED(DOGLCD)
// Show SD percentage next to the progress bar
//#define DOGM_SD_PERCENT
// Enable to save many cycles by drawing a hollow frame on the Info Screen // Enable to save many cycles by drawing a hollow frame on the Info Screen
#define XYZ_HOLLOW_FRAME #define XYZ_HOLLOW_FRAME

3
Marlin/src/config/examples/Cartesio/Configuration_adv.h

@ -613,6 +613,9 @@
* printing performance versus fast display updates. * printing performance versus fast display updates.
*/ */
#if ENABLED(DOGLCD) #if ENABLED(DOGLCD)
// Show SD percentage next to the progress bar
//#define DOGM_SD_PERCENT
// Enable to save many cycles by drawing a hollow frame on the Info Screen // Enable to save many cycles by drawing a hollow frame on the Info Screen
#define XYZ_HOLLOW_FRAME #define XYZ_HOLLOW_FRAME

3
Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h

@ -613,6 +613,9 @@
* printing performance versus fast display updates. * printing performance versus fast display updates.
*/ */
#if ENABLED(DOGLCD) #if ENABLED(DOGLCD)
// Show SD percentage next to the progress bar
//#define DOGM_SD_PERCENT
// Enable to save many cycles by drawing a hollow frame on the Info Screen // Enable to save many cycles by drawing a hollow frame on the Info Screen
#define XYZ_HOLLOW_FRAME #define XYZ_HOLLOW_FRAME

3
Marlin/src/config/examples/Creality/CR-10S/Configuration_adv.h

@ -613,6 +613,9 @@
* printing performance versus fast display updates. * printing performance versus fast display updates.
*/ */
#if ENABLED(DOGLCD) #if ENABLED(DOGLCD)
// Show SD percentage next to the progress bar
//#define DOGM_SD_PERCENT
// Enable to save many cycles by drawing a hollow frame on the Info Screen // Enable to save many cycles by drawing a hollow frame on the Info Screen
#define XYZ_HOLLOW_FRAME #define XYZ_HOLLOW_FRAME

3
Marlin/src/config/examples/Felix/Configuration_adv.h

@ -613,6 +613,9 @@
* printing performance versus fast display updates. * printing performance versus fast display updates.
*/ */
#if ENABLED(DOGLCD) #if ENABLED(DOGLCD)
// Show SD percentage next to the progress bar
//#define DOGM_SD_PERCENT
// Enable to save many cycles by drawing a hollow frame on the Info Screen // Enable to save many cycles by drawing a hollow frame on the Info Screen
#define XYZ_HOLLOW_FRAME #define XYZ_HOLLOW_FRAME

3
Marlin/src/config/examples/FolgerTech/i3-2020/Configuration_adv.h

@ -613,6 +613,9 @@
* printing performance versus fast display updates. * printing performance versus fast display updates.
*/ */
#if ENABLED(DOGLCD) #if ENABLED(DOGLCD)
// Show SD percentage next to the progress bar
//#define DOGM_SD_PERCENT
// Enable to save many cycles by drawing a hollow frame on the Info Screen // Enable to save many cycles by drawing a hollow frame on the Info Screen
#define XYZ_HOLLOW_FRAME #define XYZ_HOLLOW_FRAME

3
Marlin/src/config/examples/Infitary/i3-M508/Configuration_adv.h

@ -613,6 +613,9 @@
* printing performance versus fast display updates. * printing performance versus fast display updates.
*/ */
#if ENABLED(DOGLCD) #if ENABLED(DOGLCD)
// Show SD percentage next to the progress bar
//#define DOGM_SD_PERCENT
// Enable to save many cycles by drawing a hollow frame on the Info Screen // Enable to save many cycles by drawing a hollow frame on the Info Screen
#define XYZ_HOLLOW_FRAME #define XYZ_HOLLOW_FRAME

3
Marlin/src/config/examples/MakerParts/Configuration_adv.h

@ -613,6 +613,9 @@
* printing performance versus fast display updates. * printing performance versus fast display updates.
*/ */
#if ENABLED(DOGLCD) #if ENABLED(DOGLCD)
// Show SD percentage next to the progress bar
//#define DOGM_SD_PERCENT
// Enable to save many cycles by drawing a hollow frame on the Info Screen // Enable to save many cycles by drawing a hollow frame on the Info Screen
#define XYZ_HOLLOW_FRAME #define XYZ_HOLLOW_FRAME

3
Marlin/src/config/examples/Malyan/M150/Configuration_adv.h

@ -613,6 +613,9 @@
* printing performance versus fast display updates. * printing performance versus fast display updates.
*/ */
#if ENABLED(DOGLCD) #if ENABLED(DOGLCD)
// Show SD percentage next to the progress bar
//#define DOGM_SD_PERCENT
// Enable to save many cycles by drawing a hollow frame on the Info Screen // Enable to save many cycles by drawing a hollow frame on the Info Screen
#define XYZ_HOLLOW_FRAME #define XYZ_HOLLOW_FRAME

3
Marlin/src/config/examples/Malyan/M200/Configuration_adv.h

@ -613,6 +613,9 @@
* printing performance versus fast display updates. * printing performance versus fast display updates.
*/ */
#if ENABLED(DOGLCD) #if ENABLED(DOGLCD)
// Show SD percentage next to the progress bar
//#define DOGM_SD_PERCENT
// Enable to save many cycles by drawing a hollow frame on the Info Screen // Enable to save many cycles by drawing a hollow frame on the Info Screen
#define XYZ_HOLLOW_FRAME #define XYZ_HOLLOW_FRAME

3
Marlin/src/config/examples/Micromake/C1/enhanced/Configuration_adv.h

@ -613,6 +613,9 @@
* printing performance versus fast display updates. * printing performance versus fast display updates.
*/ */
#if ENABLED(DOGLCD) #if ENABLED(DOGLCD)
// Show SD percentage next to the progress bar
//#define DOGM_SD_PERCENT
// Enable to save many cycles by drawing a hollow frame on the Info Screen // Enable to save many cycles by drawing a hollow frame on the Info Screen
#define XYZ_HOLLOW_FRAME #define XYZ_HOLLOW_FRAME

3
Marlin/src/config/examples/Mks/Sbase/Configuration_adv.h

@ -614,6 +614,9 @@
* printing performance versus fast display updates. * printing performance versus fast display updates.
*/ */
#if ENABLED(DOGLCD) #if ENABLED(DOGLCD)
// Show SD percentage next to the progress bar
//#define DOGM_SD_PERCENT
// Enable to save many cycles by drawing a hollow frame on the Info Screen // Enable to save many cycles by drawing a hollow frame on the Info Screen
#define XYZ_HOLLOW_FRAME #define XYZ_HOLLOW_FRAME

3
Marlin/src/config/examples/RigidBot/Configuration_adv.h

@ -613,6 +613,9 @@
* printing performance versus fast display updates. * printing performance versus fast display updates.
*/ */
#if ENABLED(DOGLCD) #if ENABLED(DOGLCD)
// Show SD percentage next to the progress bar
//#define DOGM_SD_PERCENT
// Enable to save many cycles by drawing a hollow frame on the Info Screen // Enable to save many cycles by drawing a hollow frame on the Info Screen
#define XYZ_HOLLOW_FRAME #define XYZ_HOLLOW_FRAME

3
Marlin/src/config/examples/SCARA/Configuration_adv.h

@ -613,6 +613,9 @@
* printing performance versus fast display updates. * printing performance versus fast display updates.
*/ */
#if ENABLED(DOGLCD) #if ENABLED(DOGLCD)
// Show SD percentage next to the progress bar
//#define DOGM_SD_PERCENT
// Enable to save many cycles by drawing a hollow frame on the Info Screen // Enable to save many cycles by drawing a hollow frame on the Info Screen
#define XYZ_HOLLOW_FRAME #define XYZ_HOLLOW_FRAME

3
Marlin/src/config/examples/Sanguinololu/Configuration_adv.h

@ -613,6 +613,9 @@
* printing performance versus fast display updates. * printing performance versus fast display updates.
*/ */
#if ENABLED(DOGLCD) #if ENABLED(DOGLCD)
// Show SD percentage next to the progress bar
//#define DOGM_SD_PERCENT
// Enable to save many cycles by drawing a hollow frame on the Info Screen // Enable to save many cycles by drawing a hollow frame on the Info Screen
#define XYZ_HOLLOW_FRAME #define XYZ_HOLLOW_FRAME

3
Marlin/src/config/examples/TinyBoy2/Configuration_adv.h

@ -613,6 +613,9 @@
* printing performance versus fast display updates. * printing performance versus fast display updates.
*/ */
#if ENABLED(DOGLCD) #if ENABLED(DOGLCD)
// Show SD percentage next to the progress bar
//#define DOGM_SD_PERCENT
// Enable to save many cycles by drawing a hollow frame on the Info Screen // Enable to save many cycles by drawing a hollow frame on the Info Screen
#define XYZ_HOLLOW_FRAME #define XYZ_HOLLOW_FRAME

3
Marlin/src/config/examples/UltiMachine/Archim2/Configuration_adv.h

@ -613,6 +613,9 @@
* printing performance versus fast display updates. * printing performance versus fast display updates.
*/ */
#if ENABLED(DOGLCD) #if ENABLED(DOGLCD)
// Show SD percentage next to the progress bar
//#define DOGM_SD_PERCENT
// Enable to save many cycles by drawing a hollow frame on the Info Screen // Enable to save many cycles by drawing a hollow frame on the Info Screen
#define XYZ_HOLLOW_FRAME #define XYZ_HOLLOW_FRAME

3
Marlin/src/config/examples/Velleman/K8200/Configuration_adv.h

@ -626,6 +626,9 @@
* printing performance versus fast display updates. * printing performance versus fast display updates.
*/ */
#if ENABLED(DOGLCD) #if ENABLED(DOGLCD)
// Show SD percentage next to the progress bar
//#define DOGM_SD_PERCENT
// Enable to save many cycles by drawing a hollow frame on the Info Screen // Enable to save many cycles by drawing a hollow frame on the Info Screen
#define XYZ_HOLLOW_FRAME #define XYZ_HOLLOW_FRAME

3
Marlin/src/config/examples/Velleman/K8400/Configuration_adv.h

@ -613,6 +613,9 @@
* printing performance versus fast display updates. * printing performance versus fast display updates.
*/ */
#if ENABLED(DOGLCD) #if ENABLED(DOGLCD)
// Show SD percentage next to the progress bar
//#define DOGM_SD_PERCENT
// Enable to save many cycles by drawing a hollow frame on the Info Screen // Enable to save many cycles by drawing a hollow frame on the Info Screen
#define XYZ_HOLLOW_FRAME #define XYZ_HOLLOW_FRAME

3
Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration_adv.h

@ -615,6 +615,9 @@
* printing performance versus fast display updates. * printing performance versus fast display updates.
*/ */
#if ENABLED(DOGLCD) #if ENABLED(DOGLCD)
// Show SD percentage next to the progress bar
//#define DOGM_SD_PERCENT
// Enable to save many cycles by drawing a hollow frame on the Info Screen // Enable to save many cycles by drawing a hollow frame on the Info Screen
//#define XYZ_HOLLOW_FRAME //#define XYZ_HOLLOW_FRAME

3
Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h

@ -615,6 +615,9 @@
* printing performance versus fast display updates. * printing performance versus fast display updates.
*/ */
#if ENABLED(DOGLCD) #if ENABLED(DOGLCD)
// Show SD percentage next to the progress bar
//#define DOGM_SD_PERCENT
// Enable to save many cycles by drawing a hollow frame on the Info Screen // Enable to save many cycles by drawing a hollow frame on the Info Screen
#define XYZ_HOLLOW_FRAME #define XYZ_HOLLOW_FRAME

3
Marlin/src/config/examples/delta/FLSUN/kossel/Configuration_adv.h

@ -615,6 +615,9 @@
* printing performance versus fast display updates. * printing performance versus fast display updates.
*/ */
#if ENABLED(DOGLCD) #if ENABLED(DOGLCD)
// Show SD percentage next to the progress bar
//#define DOGM_SD_PERCENT
// Enable to save many cycles by drawing a hollow frame on the Info Screen // Enable to save many cycles by drawing a hollow frame on the Info Screen
#define XYZ_HOLLOW_FRAME #define XYZ_HOLLOW_FRAME

3
Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h

@ -615,6 +615,9 @@
* printing performance versus fast display updates. * printing performance versus fast display updates.
*/ */
#if ENABLED(DOGLCD) #if ENABLED(DOGLCD)
// Show SD percentage next to the progress bar
//#define DOGM_SD_PERCENT
// Enable to save many cycles by drawing a hollow frame on the Info Screen // Enable to save many cycles by drawing a hollow frame on the Info Screen
#define XYZ_HOLLOW_FRAME #define XYZ_HOLLOW_FRAME

3
Marlin/src/config/examples/delta/generic/Configuration_adv.h

@ -615,6 +615,9 @@
* printing performance versus fast display updates. * printing performance versus fast display updates.
*/ */
#if ENABLED(DOGLCD) #if ENABLED(DOGLCD)
// Show SD percentage next to the progress bar
//#define DOGM_SD_PERCENT
// Enable to save many cycles by drawing a hollow frame on the Info Screen // Enable to save many cycles by drawing a hollow frame on the Info Screen
#define XYZ_HOLLOW_FRAME #define XYZ_HOLLOW_FRAME

3
Marlin/src/config/examples/delta/kossel_mini/Configuration_adv.h

@ -615,6 +615,9 @@
* printing performance versus fast display updates. * printing performance versus fast display updates.
*/ */
#if ENABLED(DOGLCD) #if ENABLED(DOGLCD)
// Show SD percentage next to the progress bar
//#define DOGM_SD_PERCENT
// Enable to save many cycles by drawing a hollow frame on the Info Screen // Enable to save many cycles by drawing a hollow frame on the Info Screen
#define XYZ_HOLLOW_FRAME #define XYZ_HOLLOW_FRAME

3
Marlin/src/config/examples/delta/kossel_pro/Configuration_adv.h

@ -620,6 +620,9 @@
* printing performance versus fast display updates. * printing performance versus fast display updates.
*/ */
#if ENABLED(DOGLCD) #if ENABLED(DOGLCD)
// Show SD percentage next to the progress bar
//#define DOGM_SD_PERCENT
// Enable to save many cycles by drawing a hollow frame on the Info Screen // Enable to save many cycles by drawing a hollow frame on the Info Screen
#define XYZ_HOLLOW_FRAME #define XYZ_HOLLOW_FRAME

3
Marlin/src/config/examples/delta/kossel_xl/Configuration_adv.h

@ -615,6 +615,9 @@
* printing performance versus fast display updates. * printing performance versus fast display updates.
*/ */
#if ENABLED(DOGLCD) #if ENABLED(DOGLCD)
// Show SD percentage next to the progress bar
//#define DOGM_SD_PERCENT
// Enable to save many cycles by drawing a hollow frame on the Info Screen // Enable to save many cycles by drawing a hollow frame on the Info Screen
#define XYZ_HOLLOW_FRAME #define XYZ_HOLLOW_FRAME

3
Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h

@ -613,6 +613,9 @@
* printing performance versus fast display updates. * printing performance versus fast display updates.
*/ */
#if ENABLED(DOGLCD) #if ENABLED(DOGLCD)
// Show SD percentage next to the progress bar
//#define DOGM_SD_PERCENT
// Enable to save many cycles by drawing a hollow frame on the Info Screen // Enable to save many cycles by drawing a hollow frame on the Info Screen
#define XYZ_HOLLOW_FRAME #define XYZ_HOLLOW_FRAME

3
Marlin/src/config/examples/makibox/Configuration_adv.h

@ -613,6 +613,9 @@
* printing performance versus fast display updates. * printing performance versus fast display updates.
*/ */
#if ENABLED(DOGLCD) #if ENABLED(DOGLCD)
// Show SD percentage next to the progress bar
//#define DOGM_SD_PERCENT
// Enable to save many cycles by drawing a hollow frame on the Info Screen // Enable to save many cycles by drawing a hollow frame on the Info Screen
#define XYZ_HOLLOW_FRAME #define XYZ_HOLLOW_FRAME

3
Marlin/src/config/examples/tvrrug/Round2/Configuration_adv.h

@ -613,6 +613,9 @@
* printing performance versus fast display updates. * printing performance versus fast display updates.
*/ */
#if ENABLED(DOGLCD) #if ENABLED(DOGLCD)
// Show SD percentage next to the progress bar
//#define DOGM_SD_PERCENT
// Enable to save many cycles by drawing a hollow frame on the Info Screen // Enable to save many cycles by drawing a hollow frame on the Info Screen
#define XYZ_HOLLOW_FRAME #define XYZ_HOLLOW_FRAME

3
Marlin/src/config/examples/wt150/Configuration_adv.h

@ -614,6 +614,9 @@
* printing performance versus fast display updates. * printing performance versus fast display updates.
*/ */
#if ENABLED(DOGLCD) #if ENABLED(DOGLCD)
// Show SD percentage next to the progress bar
//#define DOGM_SD_PERCENT
// Enable to save many cycles by drawing a hollow frame on the Info Screen // Enable to save many cycles by drawing a hollow frame on the Info Screen
#define XYZ_HOLLOW_FRAME #define XYZ_HOLLOW_FRAME

2
Marlin/src/lcd/ultralcd_impl_DOGM.h

@ -490,8 +490,6 @@ inline void lcd_implementation_status_message(const bool blink) {
#endif #endif
} }
//#define DOGM_SD_PERCENT
static void lcd_implementation_status_screen() { static void lcd_implementation_status_screen() {
const bool blink = lcd_blink(); const bool blink = lcd_blink();

Loading…
Cancel
Save