diff --git a/Marlin/src/feature/host_actions.cpp b/Marlin/src/feature/host_actions.cpp index 3633a7b75f..c9e87a6237 100644 --- a/Marlin/src/feature/host_actions.cpp +++ b/Marlin/src/feature/host_actions.cpp @@ -84,70 +84,78 @@ void host_action(const char * const pstr, const bool eol) { if (eol) SERIAL_EOL(); } - void host_action_prompt_plus(const char * const ptype, const char * const pstr, const bool eol=true) { + void host_action_prompt_plus(const char * const ptype, const char * const pstr, const char extra_char='\0') { host_action_prompt(ptype, false); SERIAL_CHAR(' '); serialprintPGM(pstr); - if (eol) SERIAL_EOL(); + if (extra_char != '\0') SERIAL_CHAR(extra_char); + SERIAL_EOL(); + } + void host_action_prompt_begin(const PromptReason reason, const char * const pstr, const char extra_char/*='\0'*/) { + host_action_prompt_end(); + host_prompt_reason = reason; + host_action_prompt_plus(PSTR("begin"), pstr, extra_char); } - void host_action_prompt_begin(const char * const pstr, const bool eol/*=true*/) { host_action_prompt_plus(PSTR("begin"), pstr, eol); } void host_action_prompt_button(const char * const pstr) { host_action_prompt_plus(PSTR("button"), pstr); } void host_action_prompt_end() { host_action_prompt(PSTR("end")); } void host_action_prompt_show() { host_action_prompt(PSTR("show")); } - void host_prompt_do(const PromptReason reason, const char * const pstr, const char * const pbtn/*=nullptr*/) { - host_prompt_reason = reason; - host_action_prompt_end(); - host_action_prompt_begin(pstr); - if (pbtn) host_action_prompt_button(pbtn); + void host_prompt_do(const PromptReason reason, const char * const pstr, const char * const btn1/*=nullptr*/, const char * const btn2/*=nullptr*/) { + host_action_prompt_begin(reason, pstr); + if (btn1) host_action_prompt_button(btn1); + if (btn2) host_action_prompt_button(btn2); host_action_prompt_show(); } - inline void say_m876_response(const char * const pstr) { - SERIAL_ECHOPGM("M876 Responding PROMPT_"); - serialprintPGM(pstr); - SERIAL_EOL(); + void filament_load_host_prompt() { + const bool disable_to_continue = (false + #if HAS_FILAMENT_SENSOR + || runout.filament_ran_out + #endif + ); + host_prompt_do(PROMPT_FILAMENT_RUNOUT, PSTR("Paused"), PSTR("PurgeMore"), + disable_to_continue ? PSTR("DisableRunout") : CONTINUE_STR + ); } + // + // Handle responses from the host, such as: + // - Filament runout responses: Purge More, Continue + // - General "Continue" response + // - Resume Print response + // - Dismissal of info + // void host_response_handler(const uint8_t response) { #ifdef DEBUG_HOST_ACTIONS - SERIAL_ECHOLNPAIR("M876 Handle Reason: ", host_prompt_reason); - SERIAL_ECHOLNPAIR("M876 Handle Response: ", response); + static const char m876_prefix[] PROGMEM = "M876 Handle Re"; + serialprintPGM(m876_prefix); SERIAL_ECHOLNPAIR("ason: ", host_prompt_reason); + serialprintPGM(m876_prefix); SERIAL_ECHOLNPAIR("sponse: ", response); #endif const char *msg = PSTR("UNKNOWN STATE"); const PromptReason hpr = host_prompt_reason; - host_prompt_reason = PROMPT_NOT_DEFINED; + host_prompt_reason = PROMPT_NOT_DEFINED; // Reset now ahead of logic switch (hpr) { case PROMPT_FILAMENT_RUNOUT: msg = PSTR("FILAMENT_RUNOUT"); - if (response == 0) { - #if ENABLED(ADVANCED_PAUSE_FEATURE) - pause_menu_response = PAUSE_RESPONSE_EXTRUDE_MORE; - #endif - host_action_prompt_end(); // Close current prompt - host_action_prompt_begin(PSTR("Paused")); - host_action_prompt_button(PSTR("Purge More")); - if (false + switch (response) { + + case 0: // "Purge More" button + #if HAS_LCD_MENU && ENABLED(ADVANCED_PAUSE_FEATURE) + pause_menu_response = PAUSE_RESPONSE_EXTRUDE_MORE; // Simulate menu selection (menu exits, doesn't extrude more) + #endif + filament_load_host_prompt(); // Initiate another host prompt. (NOTE: The loop in load_filament may also do this!) + break; + + case 1: // "Continue" / "Disable Runout" button + #if HAS_LCD_MENU && ENABLED(ADVANCED_PAUSE_FEATURE) + pause_menu_response = PAUSE_RESPONSE_RESUME_PRINT; // Simulate menu selection + #endif #if HAS_FILAMENT_SENSOR - || runout.filament_ran_out + if (runout.filament_ran_out) { // Disable a triggered sensor + runout.enabled = false; + runout.reset(); + } #endif - ) - host_action_prompt_button(PSTR("DisableRunout")); - else { - host_prompt_reason = PROMPT_FILAMENT_RUNOUT; - host_action_prompt_button(CONTINUE_STR); - } - host_action_prompt_show(); - } - else if (response == 1) { - #if HAS_FILAMENT_SENSOR - if (runout.filament_ran_out) { - runout.enabled = false; - runout.reset(); - } - #endif - #if ENABLED(ADVANCED_PAUSE_FEATURE) - pause_menu_response = PAUSE_RESPONSE_RESUME_PRINT; - #endif + break; } break; case PROMPT_USER_CONTINUE: @@ -168,7 +176,9 @@ void host_action(const char * const pstr, const bool eol) { break; default: break; } - say_m876_response(msg); + SERIAL_ECHOPGM("M876 Responding PROMPT_"); + serialprintPGM(msg); + SERIAL_EOL(); } #endif // HOST_PROMPT_SUPPORT diff --git a/Marlin/src/feature/host_actions.h b/Marlin/src/feature/host_actions.h index 939f0be2de..d90a21b1f1 100644 --- a/Marlin/src/feature/host_actions.h +++ b/Marlin/src/feature/host_actions.h @@ -61,13 +61,15 @@ void host_action(const char * const pstr, const bool eol=true); void host_response_handler(const uint8_t response); void host_action_notify(const char * const message); - void host_action_prompt_begin(const char * const pstr, const bool eol=true); + void host_action_prompt_begin(const PromptReason reason, const char * const pstr, const char extra_char='\0'); void host_action_prompt_button(const char * const pstr); void host_action_prompt_end(); void host_action_prompt_show(); - void host_prompt_do(const PromptReason type, const char * const pstr, const char * const pbtn=nullptr); - inline void host_prompt_open(const PromptReason reason, const char * const pstr, const char * const pbtn=nullptr) { - if (host_prompt_reason == PROMPT_NOT_DEFINED) host_prompt_do(reason, pstr, pbtn); + void host_prompt_do(const PromptReason reason, const char * const pstr, const char * const btn1=nullptr, const char * const btn2=nullptr); + inline void host_prompt_open(const PromptReason reason, const char * const pstr, const char * const btn1=nullptr, const char * const btn2=nullptr) { + if (host_prompt_reason == PROMPT_NOT_DEFINED) host_prompt_do(reason, pstr, btn1, btn2); } + void filament_load_host_prompt(); + #endif diff --git a/Marlin/src/feature/pause.cpp b/Marlin/src/feature/pause.cpp index 0bf8fe4b98..5a7cde2046 100644 --- a/Marlin/src/feature/pause.cpp +++ b/Marlin/src/feature/pause.cpp @@ -67,9 +67,10 @@ static xyze_pos_t resume_position; -PauseMode pause_mode = PAUSE_MODE_PAUSE_PRINT; - -PauseMenuResponse pause_menu_response; +#if HAS_LCD_MENU + PauseMenuResponse pause_menu_response; + PauseMode pause_mode = PAUSE_MODE_PAUSE_PRINT; +#endif fil_change_settings_t fc_settings[EXTRUDERS]; @@ -85,7 +86,11 @@ fil_change_settings_t fc_settings[EXTRUDERS]; #if HAS_BUZZER static void filament_change_beep(const int8_t max_beep_count, const bool init=false) { - if (pause_mode == PAUSE_MODE_PAUSE_PRINT) return; + + #if HAS_LCD_MENU + if (pause_mode == PAUSE_MODE_PAUSE_PRINT) return; + #endif + static millis_t next_buzz = 0; static int8_t runout_beep = 0; @@ -186,11 +191,7 @@ bool load_filament(const float &slow_load_length/*=0*/, const float &fast_load_l + active_extruder #endif ; - host_prompt_reason = PROMPT_USER_CONTINUE; - host_action_prompt_end(); - host_action_prompt_begin(PSTR("Load Filament T"), false); - SERIAL_CHAR(tool); - SERIAL_EOL(); + host_action_prompt_begin(PROMPT_USER_CONTINUE, PSTR("Load Filament T"), tool); host_action_prompt_button(CONTINUE_STR); host_action_prompt_show(); #endif @@ -247,10 +248,10 @@ bool load_filament(const float &slow_load_length/*=0*/, const float &fast_load_l wait_for_user = true; #if ENABLED(HOST_PROMPT_SUPPORT) - host_prompt_do(PROMPT_USER_CONTINUE, PSTR("Filament Purge Running..."), CONTINUE_STR); + host_prompt_do(PROMPT_USER_CONTINUE, PSTR("Filament Purging..."), CONTINUE_STR); #endif #if ENABLED(EXTENSIBLE_UI) - ExtUI::onUserConfirmRequired_P(PSTR("Filament Purge Running...")); + ExtUI::onUserConfirmRequired_P(PSTR("Filament Purging...")); #endif for (float purge_count = purge_length; purge_count > 0 && wait_for_user; --purge_count) do_pause_e_move(1, ADVANCED_PAUSE_PURGE_FEEDRATE); @@ -269,27 +270,13 @@ bool load_filament(const float &slow_load_length/*=0*/, const float &fast_load_l do_pause_e_move(purge_length, ADVANCED_PAUSE_PURGE_FEEDRATE); } - // Show "Purge More" / "Resume" menu and wait for reply #if ENABLED(HOST_PROMPT_SUPPORT) - host_prompt_reason = PROMPT_FILAMENT_RUNOUT; - host_action_prompt_end(); // Close current prompt - host_action_prompt_begin(PSTR("Paused")); - host_action_prompt_button(PSTR("PurgeMore")); - if (false - #if HAS_FILAMENT_SENSOR - || runout.filament_ran_out - #endif - ) - host_action_prompt_button(PSTR("DisableRunout")); - else { - host_prompt_reason = PROMPT_FILAMENT_RUNOUT; - host_action_prompt_button(CONTINUE_STR); - } - host_action_prompt_show(); + filament_load_host_prompt(); // Initiate another host prompt. (NOTE: host_response_handler may also do this!) #endif #if HAS_LCD_MENU if (show_lcd) { + // Show "Purge More" / "Resume" menu and wait for reply KEEPALIVE_STATE(PAUSED_FOR_USER); wait_for_user = false; lcd_pause_show_message(PAUSE_MESSAGE_OPTION); diff --git a/Marlin/src/feature/pause.h b/Marlin/src/feature/pause.h index f88dd349c5..5ac67a565c 100644 --- a/Marlin/src/feature/pause.h +++ b/Marlin/src/feature/pause.h @@ -59,14 +59,15 @@ enum PauseMessage : char { PAUSE_MESSAGE_HEATING }; -enum PauseMenuResponse : char { - PAUSE_RESPONSE_WAIT_FOR, - PAUSE_RESPONSE_EXTRUDE_MORE, - PAUSE_RESPONSE_RESUME_PRINT -}; - -extern PauseMode pause_mode; -extern PauseMenuResponse pause_menu_response; +#if HAS_LCD_MENU + enum PauseMenuResponse : char { + PAUSE_RESPONSE_WAIT_FOR, + PAUSE_RESPONSE_EXTRUDE_MORE, + PAUSE_RESPONSE_RESUME_PRINT + }; + extern PauseMenuResponse pause_menu_response; + extern PauseMode pause_mode; +#endif extern fil_change_settings_t fc_settings[EXTRUDERS]; diff --git a/Marlin/src/feature/runout.cpp b/Marlin/src/feature/runout.cpp index 3acda2f7a2..3cf81303dd 100644 --- a/Marlin/src/feature/runout.cpp +++ b/Marlin/src/feature/runout.cpp @@ -92,11 +92,7 @@ void event_filament_runout() { //action:out_of_filament #if ENABLED(HOST_PROMPT_SUPPORT) - host_prompt_reason = PROMPT_FILAMENT_RUNOUT; - host_action_prompt_end(); - host_action_prompt_begin(PSTR("FilamentRunout T"), false); - SERIAL_CHAR(tool); - SERIAL_EOL(); + host_action_prompt_begin(PROMPT_FILAMENT_RUNOUT, PSTR("FilamentRunout T"), tool); host_action_prompt_show(); #endif diff --git a/Marlin/src/gcode/host/M876.cpp b/Marlin/src/gcode/host/M876.cpp index 8e83185e02..fe0ca1541a 100644 --- a/Marlin/src/gcode/host/M876.cpp +++ b/Marlin/src/gcode/host/M876.cpp @@ -31,7 +31,9 @@ * M876: Handle Prompt Response */ void GcodeSuite::M876() { + if (parser.seenval('S')) host_response_handler((uint8_t)parser.value_int()); + } #endif // HOST_PROMPT_SUPPORT && !EMERGENCY_PARSER