diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h
index 3de19977a1..17fe8f4892 100644
--- a/Marlin/Configuration_adv.h
+++ b/Marlin/Configuration_adv.h
@@ -122,6 +122,9 @@
   #define AUTOTEMP_OLDWEIGHT 0.98
 #endif
 
+// Show extra position information in M114
+//#define M114_DETAIL
+
 // Show Temperature ADC value
 // Enable for M105 to include ADC values read from temperature sensors.
 //#define SHOW_TEMP_ADC_VALUES
@@ -345,7 +348,7 @@
 
 // @section homing
 
-//homing hits the endstop, then retracts by this distance, before it tries to slowly bump again:
+// Homing hits each endstop, retracts by these distances, then does a slower bump.
 #define X_HOME_BUMP_MM 5
 #define Y_HOME_BUMP_MM 5
 #define Z_HOME_BUMP_MM 2
diff --git a/Marlin/src/config/default/Configuration_adv.h b/Marlin/src/config/default/Configuration_adv.h
index 3de19977a1..17fe8f4892 100644
--- a/Marlin/src/config/default/Configuration_adv.h
+++ b/Marlin/src/config/default/Configuration_adv.h
@@ -122,6 +122,9 @@
   #define AUTOTEMP_OLDWEIGHT 0.98
 #endif
 
+// Show extra position information in M114
+//#define M114_DETAIL
+
 // Show Temperature ADC value
 // Enable for M105 to include ADC values read from temperature sensors.
 //#define SHOW_TEMP_ADC_VALUES
@@ -345,7 +348,7 @@
 
 // @section homing
 
-//homing hits the endstop, then retracts by this distance, before it tries to slowly bump again:
+// Homing hits each endstop, retracts by these distances, then does a slower bump.
 #define X_HOME_BUMP_MM 5
 #define Y_HOME_BUMP_MM 5
 #define Z_HOME_BUMP_MM 2
diff --git a/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration_adv.h b/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration_adv.h
index 701743a122..2a313bf67e 100644
--- a/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration_adv.h
+++ b/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration_adv.h
@@ -122,6 +122,9 @@
   #define AUTOTEMP_OLDWEIGHT 0.98
 #endif
 
+// Show extra position information in M114
+//#define M114_DETAIL
+
 // Show Temperature ADC value
 // Enable for M105 to include ADC values read from temperature sensors.
 //#define SHOW_TEMP_ADC_VALUES
@@ -345,7 +348,7 @@
 
 // @section homing
 
-//homing hits the endstop, then retracts by this distance, before it tries to slowly bump again:
+// Homing hits each endstop, retracts by these distances, then does a slower bump.
 #define X_HOME_BUMP_MM 5
 #define Y_HOME_BUMP_MM 5
 #define Z_HOME_BUMP_MM 4
diff --git a/Marlin/src/config/examples/Anet/A6/Configuration_adv.h b/Marlin/src/config/examples/Anet/A6/Configuration_adv.h
index c21499b440..a029b28b65 100644
--- a/Marlin/src/config/examples/Anet/A6/Configuration_adv.h
+++ b/Marlin/src/config/examples/Anet/A6/Configuration_adv.h
@@ -122,6 +122,9 @@
   #define AUTOTEMP_OLDWEIGHT 0.98
 #endif
 
+// Show extra position information in M114
+//#define M114_DETAIL
+
 // Show Temperature ADC value
 // Enable for M105 to include ADC values read from temperature sensors.
 //#define SHOW_TEMP_ADC_VALUES
@@ -345,7 +348,7 @@
 
 // @section homing
 
-//homing hits the endstop, then retracts by this distance, before it tries to slowly bump again:
+// Homing hits each endstop, retracts by these distances, then does a slower bump.
 #define X_HOME_BUMP_MM 5
 #define Y_HOME_BUMP_MM 5
 #define Z_HOME_BUMP_MM 2
diff --git a/Marlin/src/config/examples/Anet/A8/Configuration_adv.h b/Marlin/src/config/examples/Anet/A8/Configuration_adv.h
index b843fca827..ffeff56775 100644
--- a/Marlin/src/config/examples/Anet/A8/Configuration_adv.h
+++ b/Marlin/src/config/examples/Anet/A8/Configuration_adv.h
@@ -122,6 +122,9 @@
   #define AUTOTEMP_OLDWEIGHT 0.98
 #endif
 
+// Show extra position information in M114
+//#define M114_DETAIL
+
 // Show Temperature ADC value
 // Enable for M105 to include ADC values read from temperature sensors.
 //#define SHOW_TEMP_ADC_VALUES
@@ -345,7 +348,7 @@
 
 // @section homing
 
-//homing hits the endstop, then retracts by this distance, before it tries to slowly bump again:
+// Homing hits each endstop, retracts by these distances, then does a slower bump.
 #define X_HOME_BUMP_MM 5
 #define Y_HOME_BUMP_MM 5
 #define Z_HOME_BUMP_MM 2
diff --git a/Marlin/src/config/examples/Azteeg/X5GT/Configuration_adv.h b/Marlin/src/config/examples/Azteeg/X5GT/Configuration_adv.h
index 88f73533a7..03c6ace298 100644
--- a/Marlin/src/config/examples/Azteeg/X5GT/Configuration_adv.h
+++ b/Marlin/src/config/examples/Azteeg/X5GT/Configuration_adv.h
@@ -122,6 +122,9 @@
   #define AUTOTEMP_OLDWEIGHT 0.98
 #endif
 
+// Show extra position information in M114
+//#define M114_DETAIL
+
 // Show Temperature ADC value
 // Enable for M105 to include ADC values read from temperature sensors.
 //#define SHOW_TEMP_ADC_VALUES
@@ -345,7 +348,7 @@
 
 // @section homing
 
-//homing hits the endstop, then retracts by this distance, before it tries to slowly bump again:
+// Homing hits each endstop, retracts by these distances, then does a slower bump.
 #define X_HOME_BUMP_MM 5
 #define Y_HOME_BUMP_MM 5
 #define Z_HOME_BUMP_MM 2
diff --git a/Marlin/src/config/examples/BQ/Hephestos/Configuration_adv.h b/Marlin/src/config/examples/BQ/Hephestos/Configuration_adv.h
index 51f75a4729..b4cabcae25 100644
--- a/Marlin/src/config/examples/BQ/Hephestos/Configuration_adv.h
+++ b/Marlin/src/config/examples/BQ/Hephestos/Configuration_adv.h
@@ -122,6 +122,9 @@
   #define AUTOTEMP_OLDWEIGHT 0.98
 #endif
 
+// Show extra position information in M114
+//#define M114_DETAIL
+
 // Show Temperature ADC value
 // Enable for M105 to include ADC values read from temperature sensors.
 //#define SHOW_TEMP_ADC_VALUES
@@ -345,7 +348,7 @@
 
 // @section homing
 
-//homing hits the endstop, then retracts by this distance, before it tries to slowly bump again:
+// Homing hits each endstop, retracts by these distances, then does a slower bump.
 #define X_HOME_BUMP_MM 5
 #define Y_HOME_BUMP_MM 5
 #define Z_HOME_BUMP_MM 2
diff --git a/Marlin/src/config/examples/BQ/Hephestos_2/Configuration_adv.h b/Marlin/src/config/examples/BQ/Hephestos_2/Configuration_adv.h
index 1a2e7173da..679a95d253 100644
--- a/Marlin/src/config/examples/BQ/Hephestos_2/Configuration_adv.h
+++ b/Marlin/src/config/examples/BQ/Hephestos_2/Configuration_adv.h
@@ -122,6 +122,9 @@
   #define AUTOTEMP_OLDWEIGHT 0.98
 #endif
 
+// Show extra position information in M114
+//#define M114_DETAIL
+
 // Show Temperature ADC value
 // Enable for M105 to include ADC values read from temperature sensors.
 //#define SHOW_TEMP_ADC_VALUES
@@ -345,7 +348,7 @@
 
 // @section homing
 
-//homing hits the endstop, then retracts by this distance, before it tries to slowly bump again:
+// Homing hits each endstop, retracts by these distances, then does a slower bump.
 #define X_HOME_BUMP_MM 5
 #define Y_HOME_BUMP_MM 5
 #define Z_HOME_BUMP_MM 2
diff --git a/Marlin/src/config/examples/BQ/WITBOX/Configuration_adv.h b/Marlin/src/config/examples/BQ/WITBOX/Configuration_adv.h
index 51f75a4729..b4cabcae25 100644
--- a/Marlin/src/config/examples/BQ/WITBOX/Configuration_adv.h
+++ b/Marlin/src/config/examples/BQ/WITBOX/Configuration_adv.h
@@ -122,6 +122,9 @@
   #define AUTOTEMP_OLDWEIGHT 0.98
 #endif
 
+// Show extra position information in M114
+//#define M114_DETAIL
+
 // Show Temperature ADC value
 // Enable for M105 to include ADC values read from temperature sensors.
 //#define SHOW_TEMP_ADC_VALUES
@@ -345,7 +348,7 @@
 
 // @section homing
 
-//homing hits the endstop, then retracts by this distance, before it tries to slowly bump again:
+// Homing hits each endstop, retracts by these distances, then does a slower bump.
 #define X_HOME_BUMP_MM 5
 #define Y_HOME_BUMP_MM 5
 #define Z_HOME_BUMP_MM 2
diff --git a/Marlin/src/config/examples/Cartesio/Configuration_adv.h b/Marlin/src/config/examples/Cartesio/Configuration_adv.h
index d2cc658717..835e5332fb 100644
--- a/Marlin/src/config/examples/Cartesio/Configuration_adv.h
+++ b/Marlin/src/config/examples/Cartesio/Configuration_adv.h
@@ -122,6 +122,9 @@
   #define AUTOTEMP_OLDWEIGHT 0.98
 #endif
 
+// Show extra position information in M114
+//#define M114_DETAIL
+
 // Show Temperature ADC value
 // Enable for M105 to include ADC values read from temperature sensors.
 //#define SHOW_TEMP_ADC_VALUES
@@ -345,7 +348,7 @@
 
 // @section homing
 
-//homing hits the endstop, then retracts by this distance, before it tries to slowly bump again:
+// Homing hits each endstop, retracts by these distances, then does a slower bump.
 #define X_HOME_BUMP_MM 5
 #define Y_HOME_BUMP_MM 5
 #define Z_HOME_BUMP_MM 2
diff --git a/Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h b/Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h
index 5c01a68547..d98b8dadab 100644
--- a/Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h
+++ b/Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h
@@ -122,6 +122,9 @@
   #define AUTOTEMP_OLDWEIGHT 0.98
 #endif
 
+// Show extra position information in M114
+//#define M114_DETAIL
+
 // Show Temperature ADC value
 // Enable for M105 to include ADC values read from temperature sensors.
 //#define SHOW_TEMP_ADC_VALUES
@@ -345,7 +348,7 @@
 
 // @section homing
 
-//homing hits the endstop, then retracts by this distance, before it tries to slowly bump again:
+// Homing hits each endstop, retracts by these distances, then does a slower bump.
 #define X_HOME_BUMP_MM 5
 #define Y_HOME_BUMP_MM 5
 #define Z_HOME_BUMP_MM 2
diff --git a/Marlin/src/config/examples/Felix/Configuration_adv.h b/Marlin/src/config/examples/Felix/Configuration_adv.h
index dc44e929cc..7b57bb67b6 100644
--- a/Marlin/src/config/examples/Felix/Configuration_adv.h
+++ b/Marlin/src/config/examples/Felix/Configuration_adv.h
@@ -122,6 +122,9 @@
   #define AUTOTEMP_OLDWEIGHT 0.98
 #endif
 
+// Show extra position information in M114
+//#define M114_DETAIL
+
 // Show Temperature ADC value
 // Enable for M105 to include ADC values read from temperature sensors.
 //#define SHOW_TEMP_ADC_VALUES
@@ -345,7 +348,7 @@
 
 // @section homing
 
-//homing hits the endstop, then retracts by this distance, before it tries to slowly bump again:
+// Homing hits each endstop, retracts by these distances, then does a slower bump.
 #define X_HOME_BUMP_MM 5
 #define Y_HOME_BUMP_MM 5
 #define Z_HOME_BUMP_MM 3
diff --git a/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration_adv.h b/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration_adv.h
index 7df606afd5..1c25f663f0 100644
--- a/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration_adv.h
+++ b/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration_adv.h
@@ -122,6 +122,9 @@
   #define AUTOTEMP_OLDWEIGHT 0.98
 #endif
 
+// Show extra position information in M114
+//#define M114_DETAIL
+
 // Show Temperature ADC value
 // Enable for M105 to include ADC values read from temperature sensors.
 //#define SHOW_TEMP_ADC_VALUES
@@ -345,7 +348,7 @@
 
 // @section homing
 
-//homing hits the endstop, then retracts by this distance, before it tries to slowly bump again:
+// Homing hits each endstop, retracts by these distances, then does a slower bump.
 #define X_HOME_BUMP_MM 5
 #define Y_HOME_BUMP_MM 5
 #define Z_HOME_BUMP_MM 2
diff --git a/Marlin/src/config/examples/Infitary/i3-M508/Configuration_adv.h b/Marlin/src/config/examples/Infitary/i3-M508/Configuration_adv.h
index 2d093bbeb7..df68a5beb0 100644
--- a/Marlin/src/config/examples/Infitary/i3-M508/Configuration_adv.h
+++ b/Marlin/src/config/examples/Infitary/i3-M508/Configuration_adv.h
@@ -122,6 +122,9 @@
   #define AUTOTEMP_OLDWEIGHT 0.98
 #endif
 
+// Show extra position information in M114
+//#define M114_DETAIL
+
 // Show Temperature ADC value
 // Enable for M105 to include ADC values read from temperature sensors.
 //#define SHOW_TEMP_ADC_VALUES
@@ -345,7 +348,7 @@
 
 // @section homing
 
-//homing hits the endstop, then retracts by this distance, before it tries to slowly bump again:
+// Homing hits each endstop, retracts by these distances, then does a slower bump.
 #define X_HOME_BUMP_MM 5
 #define Y_HOME_BUMP_MM 5
 #define Z_HOME_BUMP_MM 1
diff --git a/Marlin/src/config/examples/Malyan/M150/Configuration_adv.h b/Marlin/src/config/examples/Malyan/M150/Configuration_adv.h
index 562207353f..7303c9e384 100644
--- a/Marlin/src/config/examples/Malyan/M150/Configuration_adv.h
+++ b/Marlin/src/config/examples/Malyan/M150/Configuration_adv.h
@@ -122,6 +122,9 @@
   #define AUTOTEMP_OLDWEIGHT 0.98
 #endif
 
+// Show extra position information in M114
+//#define M114_DETAIL
+
 // Show Temperature ADC value
 // Enable for M105 to include ADC values read from temperature sensors.
 //#define SHOW_TEMP_ADC_VALUES
@@ -345,7 +348,7 @@
 
 // @section homing
 
-//homing hits the endstop, then retracts by this distance, before it tries to slowly bump again:
+// Homing hits each endstop, retracts by these distances, then does a slower bump.
 #define X_HOME_BUMP_MM 5
 #define Y_HOME_BUMP_MM 5
 #define Z_HOME_BUMP_MM 2
diff --git a/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration_adv.h b/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration_adv.h
index 1081154984..7453bb0b52 100644
--- a/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration_adv.h
+++ b/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration_adv.h
@@ -122,6 +122,9 @@
   #define AUTOTEMP_OLDWEIGHT 0.98
 #endif
 
+// Show extra position information in M114
+//#define M114_DETAIL
+
 // Show Temperature ADC value
 // Enable for M105 to include ADC values read from temperature sensors.
 //#define SHOW_TEMP_ADC_VALUES
@@ -345,7 +348,7 @@
 
 // @section homing
 
-//homing hits the endstop, then retracts by this distance, before it tries to slowly bump again:
+// Homing hits each endstop, retracts by these distances, then does a slower bump.
 #define X_HOME_BUMP_MM 5
 #define Y_HOME_BUMP_MM 5
 #define Z_HOME_BUMP_MM 2
diff --git a/Marlin/src/config/examples/Mks/Sbase/Configuration_adv.h b/Marlin/src/config/examples/Mks/Sbase/Configuration_adv.h
index 1f02f41e7c..7b51dfb46f 100644
--- a/Marlin/src/config/examples/Mks/Sbase/Configuration_adv.h
+++ b/Marlin/src/config/examples/Mks/Sbase/Configuration_adv.h
@@ -122,6 +122,9 @@
   #define AUTOTEMP_OLDWEIGHT 0.98
 #endif
 
+// Show extra position information in M114
+//#define M114_DETAIL
+
 // Show Temperature ADC value
 // Enable for M105 to include ADC values read from temperature sensors.
 //#define SHOW_TEMP_ADC_VALUES
@@ -345,7 +348,7 @@
 
 // @section homing
 
-//homing hits the endstop, then retracts by this distance, before it tries to slowly bump again:
+// Homing hits each endstop, retracts by these distances, then does a slower bump.
 #define X_HOME_BUMP_MM 5
 #define Y_HOME_BUMP_MM 5
 #define Z_HOME_BUMP_MM 2
diff --git a/Marlin/src/config/examples/RigidBot/Configuration_adv.h b/Marlin/src/config/examples/RigidBot/Configuration_adv.h
index 073148c13e..5628100d0b 100644
--- a/Marlin/src/config/examples/RigidBot/Configuration_adv.h
+++ b/Marlin/src/config/examples/RigidBot/Configuration_adv.h
@@ -122,6 +122,9 @@
   #define AUTOTEMP_OLDWEIGHT 0.98
 #endif
 
+// Show extra position information in M114
+//#define M114_DETAIL
+
 // Show Temperature ADC value
 // Enable for M105 to include ADC values read from temperature sensors.
 //#define SHOW_TEMP_ADC_VALUES
@@ -345,7 +348,7 @@
 
 // @section homing
 
-//homing hits the endstop, then retracts by this distance, before it tries to slowly bump again:
+// Homing hits each endstop, retracts by these distances, then does a slower bump.
 #define X_HOME_BUMP_MM 5
 #define Y_HOME_BUMP_MM 5
 #define Z_HOME_BUMP_MM 2
diff --git a/Marlin/src/config/examples/SCARA/Configuration_adv.h b/Marlin/src/config/examples/SCARA/Configuration_adv.h
index 3f5d9851fd..ced910e095 100644
--- a/Marlin/src/config/examples/SCARA/Configuration_adv.h
+++ b/Marlin/src/config/examples/SCARA/Configuration_adv.h
@@ -122,6 +122,9 @@
   #define AUTOTEMP_OLDWEIGHT 0.98
 #endif
 
+// Show extra position information in M114
+//#define M114_DETAIL
+
 // Show Temperature ADC value
 // Enable for M105 to include ADC values read from temperature sensors.
 //#define SHOW_TEMP_ADC_VALUES
@@ -345,7 +348,7 @@
 
 // @section homing
 
-//homing hits the endstop, then retracts by this distance, before it tries to slowly bump again:
+// Homing hits each endstop, retracts by these distances, then does a slower bump.
 #define X_HOME_BUMP_MM 3
 #define Y_HOME_BUMP_MM 3
 #define Z_HOME_BUMP_MM 3
diff --git a/Marlin/src/config/examples/Sanguinololu/Configuration_adv.h b/Marlin/src/config/examples/Sanguinololu/Configuration_adv.h
index 8bee1f39a7..8b2b73825c 100644
--- a/Marlin/src/config/examples/Sanguinololu/Configuration_adv.h
+++ b/Marlin/src/config/examples/Sanguinololu/Configuration_adv.h
@@ -122,6 +122,9 @@
   #define AUTOTEMP_OLDWEIGHT 0.98
 #endif
 
+// Show extra position information in M114
+//#define M114_DETAIL
+
 // Show Temperature ADC value
 // Enable for M105 to include ADC values read from temperature sensors.
 //#define SHOW_TEMP_ADC_VALUES
@@ -334,7 +337,7 @@
 
 // @section homing
 
-//homing hits the endstop, then retracts by this distance, before it tries to slowly bump again:
+// Homing hits each endstop, retracts by these distances, then does a slower bump.
 #define X_HOME_BUMP_MM 5
 #define Y_HOME_BUMP_MM 5
 #define Z_HOME_BUMP_MM 2
diff --git a/Marlin/src/config/examples/TinyBoy2/Configuration_adv.h b/Marlin/src/config/examples/TinyBoy2/Configuration_adv.h
index dcd3bfcc5a..5bc259206c 100644
--- a/Marlin/src/config/examples/TinyBoy2/Configuration_adv.h
+++ b/Marlin/src/config/examples/TinyBoy2/Configuration_adv.h
@@ -122,6 +122,9 @@
   #define AUTOTEMP_OLDWEIGHT 0.98
 #endif
 
+// Show extra position information in M114
+//#define M114_DETAIL
+
 // Show Temperature ADC value
 // Enable for M105 to include ADC values read from temperature sensors.
 //#define SHOW_TEMP_ADC_VALUES
@@ -345,7 +348,7 @@
 
 // @section homing
 
-//homing hits the endstop, then retracts by this distance, before it tries to slowly bump again:
+// Homing hits each endstop, retracts by these distances, then does a slower bump.
 #define X_HOME_BUMP_MM 5
 #define Y_HOME_BUMP_MM 5
 #define Z_HOME_BUMP_MM 2
diff --git a/Marlin/src/config/examples/UltiMachine/Archim2/Configuration_adv.h b/Marlin/src/config/examples/UltiMachine/Archim2/Configuration_adv.h
index 5bffde3fab..ae63dee463 100644
--- a/Marlin/src/config/examples/UltiMachine/Archim2/Configuration_adv.h
+++ b/Marlin/src/config/examples/UltiMachine/Archim2/Configuration_adv.h
@@ -122,6 +122,9 @@
   #define AUTOTEMP_OLDWEIGHT 0.98
 #endif
 
+// Show extra position information in M114
+//#define M114_DETAIL
+
 // Show Temperature ADC value
 // Enable for M105 to include ADC values read from temperature sensors.
 //#define SHOW_TEMP_ADC_VALUES
@@ -345,7 +348,7 @@
 
 // @section homing
 
-//homing hits the endstop, then retracts by this distance, before it tries to slowly bump again:
+// Homing hits each endstop, retracts by these distances, then does a slower bump.
 #define X_HOME_BUMP_MM 5
 #define Y_HOME_BUMP_MM 5
 #define Z_HOME_BUMP_MM 2
diff --git a/Marlin/src/config/examples/Velleman/K8200/Configuration_adv.h b/Marlin/src/config/examples/Velleman/K8200/Configuration_adv.h
index 20cc256910..dfd08d328d 100644
--- a/Marlin/src/config/examples/Velleman/K8200/Configuration_adv.h
+++ b/Marlin/src/config/examples/Velleman/K8200/Configuration_adv.h
@@ -135,6 +135,9 @@
   #define AUTOTEMP_OLDWEIGHT 0.98
 #endif
 
+// Show extra position information in M114
+//#define M114_DETAIL
+
 // Show Temperature ADC value
 // Enable for M105 to include ADC values read from temperature sensors.
 //#define SHOW_TEMP_ADC_VALUES
@@ -358,7 +361,7 @@
 
 // @section homing
 
-//homing hits the endstop, then retracts by this distance, before it tries to slowly bump again:
+// Homing hits each endstop, retracts by these distances, then does a slower bump.
 #define X_HOME_BUMP_MM 5
 #define Y_HOME_BUMP_MM 5
 #define Z_HOME_BUMP_MM 2
diff --git a/Marlin/src/config/examples/Velleman/K8400/Configuration_adv.h b/Marlin/src/config/examples/Velleman/K8400/Configuration_adv.h
index db8519d705..80b805e6dc 100644
--- a/Marlin/src/config/examples/Velleman/K8400/Configuration_adv.h
+++ b/Marlin/src/config/examples/Velleman/K8400/Configuration_adv.h
@@ -122,6 +122,9 @@
   #define AUTOTEMP_OLDWEIGHT 0.98
 #endif
 
+// Show extra position information in M114
+//#define M114_DETAIL
+
 // Show Temperature ADC value
 // Enable for M105 to include ADC values read from temperature sensors.
 //#define SHOW_TEMP_ADC_VALUES
@@ -345,7 +348,7 @@
 
 // @section homing
 
-//homing hits the endstop, then retracts by this distance, before it tries to slowly bump again:
+// Homing hits each endstop, retracts by these distances, then does a slower bump.
 #define X_HOME_BUMP_MM 10
 #define Y_HOME_BUMP_MM 10
 #define Z_HOME_BUMP_MM 3
diff --git a/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h b/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h
index cc814c4618..e32d73cfa1 100644
--- a/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h
+++ b/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h
@@ -122,6 +122,9 @@
   #define AUTOTEMP_OLDWEIGHT 0.98
 #endif
 
+// Show extra position information in M114
+//#define M114_DETAIL
+
 // Show Temperature ADC value
 // Enable for M105 to include ADC values read from temperature sensors.
 //#define SHOW_TEMP_ADC_VALUES
@@ -345,7 +348,7 @@
 
 // @section homing
 
-//homing hits the endstop, then retracts by this distance, before it tries to slowly bump again:
+// Homing hits each endstop, retracts by these distances, then does a slower bump.
 #define X_HOME_BUMP_MM 5
 #define Y_HOME_BUMP_MM 5
 #define Z_HOME_BUMP_MM 5 // deltas need the same for all three axes
diff --git a/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h b/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h
index 685876a091..663cb5c5f6 100644
--- a/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h
+++ b/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h
@@ -122,6 +122,9 @@
   #define AUTOTEMP_OLDWEIGHT 0.98
 #endif
 
+// Show extra position information in M114
+//#define M114_DETAIL
+
 // Show Temperature ADC value
 // Enable for M105 to include ADC values read from temperature sensors.
 //#define SHOW_TEMP_ADC_VALUES
@@ -345,7 +348,7 @@
 
 // @section homing
 
-//homing hits the endstop, then retracts by this distance, before it tries to slowly bump again:
+// Homing hits each endstop, retracts by these distances, then does a slower bump.
 #define X_HOME_BUMP_MM 5
 #define Y_HOME_BUMP_MM 5
 #define Z_HOME_BUMP_MM 5 // deltas need the same for all three axes
diff --git a/Marlin/src/config/examples/delta/generic/Configuration_adv.h b/Marlin/src/config/examples/delta/generic/Configuration_adv.h
index 685876a091..663cb5c5f6 100644
--- a/Marlin/src/config/examples/delta/generic/Configuration_adv.h
+++ b/Marlin/src/config/examples/delta/generic/Configuration_adv.h
@@ -122,6 +122,9 @@
   #define AUTOTEMP_OLDWEIGHT 0.98
 #endif
 
+// Show extra position information in M114
+//#define M114_DETAIL
+
 // Show Temperature ADC value
 // Enable for M105 to include ADC values read from temperature sensors.
 //#define SHOW_TEMP_ADC_VALUES
@@ -345,7 +348,7 @@
 
 // @section homing
 
-//homing hits the endstop, then retracts by this distance, before it tries to slowly bump again:
+// Homing hits each endstop, retracts by these distances, then does a slower bump.
 #define X_HOME_BUMP_MM 5
 #define Y_HOME_BUMP_MM 5
 #define Z_HOME_BUMP_MM 5 // deltas need the same for all three axes
diff --git a/Marlin/src/config/examples/delta/kossel_mini/Configuration_adv.h b/Marlin/src/config/examples/delta/kossel_mini/Configuration_adv.h
index 685876a091..663cb5c5f6 100644
--- a/Marlin/src/config/examples/delta/kossel_mini/Configuration_adv.h
+++ b/Marlin/src/config/examples/delta/kossel_mini/Configuration_adv.h
@@ -122,6 +122,9 @@
   #define AUTOTEMP_OLDWEIGHT 0.98
 #endif
 
+// Show extra position information in M114
+//#define M114_DETAIL
+
 // Show Temperature ADC value
 // Enable for M105 to include ADC values read from temperature sensors.
 //#define SHOW_TEMP_ADC_VALUES
@@ -345,7 +348,7 @@
 
 // @section homing
 
-//homing hits the endstop, then retracts by this distance, before it tries to slowly bump again:
+// Homing hits each endstop, retracts by these distances, then does a slower bump.
 #define X_HOME_BUMP_MM 5
 #define Y_HOME_BUMP_MM 5
 #define Z_HOME_BUMP_MM 5 // deltas need the same for all three axes
diff --git a/Marlin/src/config/examples/delta/kossel_pro/Configuration_adv.h b/Marlin/src/config/examples/delta/kossel_pro/Configuration_adv.h
index d21e170ccc..78b45d8dbb 100644
--- a/Marlin/src/config/examples/delta/kossel_pro/Configuration_adv.h
+++ b/Marlin/src/config/examples/delta/kossel_pro/Configuration_adv.h
@@ -127,6 +127,9 @@
   #define AUTOTEMP_OLDWEIGHT 0.98
 #endif
 
+// Show extra position information in M114
+//#define M114_DETAIL
+
 // Show Temperature ADC value
 // Enable for M105 to include ADC values read from temperature sensors.
 //#define SHOW_TEMP_ADC_VALUES
@@ -350,7 +353,7 @@
 
 // @section homing
 
-//homing hits the endstop, then retracts by this distance, before it tries to slowly bump again:
+// Homing hits each endstop, retracts by these distances, then does a slower bump.
 #define X_HOME_BUMP_MM 5
 #define Y_HOME_BUMP_MM 5
 #define Z_HOME_BUMP_MM 5 // deltas need the same for all three axes
diff --git a/Marlin/src/config/examples/delta/kossel_xl/Configuration_adv.h b/Marlin/src/config/examples/delta/kossel_xl/Configuration_adv.h
index ce3420b7cd..51ef5ec592 100644
--- a/Marlin/src/config/examples/delta/kossel_xl/Configuration_adv.h
+++ b/Marlin/src/config/examples/delta/kossel_xl/Configuration_adv.h
@@ -122,6 +122,9 @@
   #define AUTOTEMP_OLDWEIGHT 0.98
 #endif
 
+// Show extra position information in M114
+//#define M114_DETAIL
+
 // Show Temperature ADC value
 // Enable for M105 to include ADC values read from temperature sensors.
 //#define SHOW_TEMP_ADC_VALUES
@@ -345,7 +348,7 @@
 
 // @section homing
 
-//homing hits the endstop, then retracts by this distance, before it tries to slowly bump again:
+// Homing hits each endstop, retracts by these distances, then does a slower bump.
 #define X_HOME_BUMP_MM 2
 #define Y_HOME_BUMP_MM 2
 #define Z_HOME_BUMP_MM 2 // deltas need the same for all three axes
diff --git a/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h b/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h
index 978bca291b..f128442ed5 100644
--- a/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h
+++ b/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h
@@ -122,6 +122,9 @@
   #define AUTOTEMP_OLDWEIGHT 0.98
 #endif
 
+// Show extra position information in M114
+//#define M114_DETAIL
+
 // Show Temperature ADC value
 // Enable for M105 to include ADC values read from temperature sensors.
 //#define SHOW_TEMP_ADC_VALUES
@@ -345,7 +348,7 @@
 
 // @section homing
 
-//homing hits the endstop, then retracts by this distance, before it tries to slowly bump again:
+// Homing hits each endstop, retracts by these distances, then does a slower bump.
 #define X_HOME_BUMP_MM 5
 #define Y_HOME_BUMP_MM 5
 #define Z_HOME_BUMP_MM 2
diff --git a/Marlin/src/config/examples/makibox/Configuration_adv.h b/Marlin/src/config/examples/makibox/Configuration_adv.h
index 360692cc78..94ae9e8889 100644
--- a/Marlin/src/config/examples/makibox/Configuration_adv.h
+++ b/Marlin/src/config/examples/makibox/Configuration_adv.h
@@ -122,6 +122,9 @@
   #define AUTOTEMP_OLDWEIGHT 0.98
 #endif
 
+// Show extra position information in M114
+//#define M114_DETAIL
+
 // Show Temperature ADC value
 // Enable for M105 to include ADC values read from temperature sensors.
 //#define SHOW_TEMP_ADC_VALUES
@@ -345,7 +348,7 @@
 
 // @section homing
 
-//homing hits the endstop, then retracts by this distance, before it tries to slowly bump again:
+// Homing hits each endstop, retracts by these distances, then does a slower bump.
 #define X_HOME_BUMP_MM 5
 #define Y_HOME_BUMP_MM 5
 #define Z_HOME_BUMP_MM 2
diff --git a/Marlin/src/config/examples/tvrrug/Round2/Configuration_adv.h b/Marlin/src/config/examples/tvrrug/Round2/Configuration_adv.h
index adef48da2b..4906bc33d7 100644
--- a/Marlin/src/config/examples/tvrrug/Round2/Configuration_adv.h
+++ b/Marlin/src/config/examples/tvrrug/Round2/Configuration_adv.h
@@ -122,6 +122,9 @@
   #define AUTOTEMP_OLDWEIGHT 0.98
 #endif
 
+// Show extra position information in M114
+//#define M114_DETAIL
+
 // Show Temperature ADC value
 // Enable for M105 to include ADC values read from temperature sensors.
 //#define SHOW_TEMP_ADC_VALUES
@@ -345,7 +348,7 @@
 
 // @section homing
 
-//homing hits the endstop, then retracts by this distance, before it tries to slowly bump again:
+// Homing hits each endstop, retracts by these distances, then does a slower bump.
 #define X_HOME_BUMP_MM 5
 #define Y_HOME_BUMP_MM 5
 #define Z_HOME_BUMP_MM 1
diff --git a/Marlin/src/config/examples/wt150/Configuration_adv.h b/Marlin/src/config/examples/wt150/Configuration_adv.h
index 0c4e309186..4d3c0e385d 100644
--- a/Marlin/src/config/examples/wt150/Configuration_adv.h
+++ b/Marlin/src/config/examples/wt150/Configuration_adv.h
@@ -122,6 +122,9 @@
   #define AUTOTEMP_OLDWEIGHT 0.98
 #endif
 
+// Show extra position information in M114
+//#define M114_DETAIL
+
 // Show Temperature ADC value
 // Enable for M105 to include ADC values read from temperature sensors.
 //#define SHOW_TEMP_ADC_VALUES
@@ -345,7 +348,7 @@
 
 // @section homing
 
-//homing hits the endstop, then retracts by this distance, before it tries to slowly bump again:
+// Homing hits each endstop, retracts by these distances, then does a slower bump.
 #define X_HOME_BUMP_MM 5
 #define Y_HOME_BUMP_MM 5
 #define Z_HOME_BUMP_MM 2
diff --git a/Marlin/src/gcode/host/M114.cpp b/Marlin/src/gcode/host/M114.cpp
index cf901884a1..fc14d921aa 100644
--- a/Marlin/src/gcode/host/M114.cpp
+++ b/Marlin/src/gcode/host/M114.cpp
@@ -26,7 +26,7 @@
 #include "../../module/motion.h"
 #include "../../module/stepper.h"
 
-#ifdef M114_DETAIL
+#if ENABLED(M114_DETAIL)
 
   void report_xyze(const float pos[XYZE], const uint8_t n = 4, const uint8_t precision = 3) {
     char str[12];
@@ -111,7 +111,7 @@
  */
 void GcodeSuite::M114() {
 
-  #ifdef M114_DETAIL
+  #if ENABLED(M114_DETAIL)
     if (parser.seen('D')) {
       report_current_position_detail();
       return;