Marlin 2.0 for Flying Bear 4S/5
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

119 lines
3.0 KiB

/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once
/**
* Longer3D LK1/LK4/LK5 Pro board pin assignments
*/
#if NOT_TARGET(__AVR_ATmega2560__)
#error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'"
#elif HOTENDS > 1 || E_STEPPERS > 1
#error "Longer3D LGT KIT V1.0 board only supports 1 hotend / E-stepper. Comment out this line to continue."
#endif
#if SERIAL_PORT == 1 || SERIAL_PORT_2 == 1
#warning "Serial 1 is originally reserved to DGUS LCD."
#endif
#if SERIAL_PORT == 2 || SERIAL_PORT_2 == 2
#warning "Serial 2 has no connector. Hardware changes may be required to use it."
#endif
#if SERIAL_PORT == 3 || SERIAL_PORT_2 == 3
#define CHANGE_Y_LIMIT_PINS
#warning "Serial 3 is originally reserved to Y limit switches. Hardware changes are required to use it."
#endif
// Custom flags and defines for the build
//#define BOARD_CUSTOM_BUILD_FLAGS -D__FOO__
#define BOARD_INFO_NAME "LGT KIT V1.0"
//
// Servos
//
#if !MB(LONGER3D_LK1_PRO)
#define SERVO0_PIN 7
#endif
#define SERVO1_PIN -1
#define SERVO2_PIN -1
#define SERVO3_PIN -1
//
// Limit Switches
//
#define X_STOP_PIN 3
#ifdef CHANGE_Y_LIMIT_PINS
#define Y_STOP_PIN 37
#else
#define Y_MIN_PIN 14
#define Y_MAX_PIN 15
#endif
#if !MB(LONGER3D_LK1_PRO)
#ifdef CHANGE_Y_LIMIT_PINS
#define Z_STOP_PIN 35
#else
#define Z_MIN_PIN 35
#define Z_MAX_PIN 37
#endif
#else
#define Z_MIN_PIN 11
#define Z_MAX_PIN 37
#endif
//
// Z Probe (when not Z_MIN_PIN)
//
#define Z_MIN_PROBE_PIN -1
//
// Misc. Functions
//
#define SD_DETECT_PIN 49
#define FIL_RUNOUT_PIN 2
//
// Other RAMPS 1.3 pins
//
#define IS_RAMPS_EFB // Override autodetection. Bed will be undefined.
#include "pins_RAMPS_13.h"
//
// Steppers
//
#undef E1_STEP_PIN
#undef E1_DIR_PIN
#undef E1_ENABLE_PIN
#undef E1_CS_PIN
//
// Temperature Sensors
//
#undef TEMP_1_PIN
//
// Průša i3 MK2 Multiplexer Support
//
#undef E_MUX2_PIN
#undef CHANGE_Y_LIMIT_PINS