Marlin_FB4S/Marlin/thermistortables.h

/**
 * Marlin 3D Printer Firmware
 * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 3 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <http://www.gnu.org/licenses/>.
 *
 */

#ifndef THERMISTORTABLES_H_
#define THERMISTORTABLES_H_

#include "Marlin.h"
#include "macros.h"

#define OVERSAMPLENR 16

#define ANY_THERMISTOR_IS(n) (THERMISTORHEATER_0 == n || THERMISTORHEATER_1 == n || THERMISTORHEATER_2 == n || THERMISTORHEATER_3 == n || THERMISTORHEATER_4 == n || THERMISTORBED == n)

// Pt1000 and Pt100 handling
//
// Rt=R0*(1+a*T+b*T*T) [for T>0]
// a=3.9083E-3, b=-5.775E-7
#define PtA 3.9083E-3
#define PtB -5.775E-7
#define PtRt(T,R0) ((R0)*(1.0+(PtA)*(T)+(PtB)*(T)*(T)))
#define PtAdVal(T,R0,Rup) (short)(1024/(Rup/PtRt(T,R0)+1))
#define PtLine(T,R0,Rup) { PtAdVal(T,R0,Rup)*OVERSAMPLENR, T },

#if ANY_THERMISTOR_IS(1) // 100k bed thermistor
  #include "thermistortable_1.h"
#endif
#if ANY_THERMISTOR_IS(2) // 200k bed thermistor
  #include "thermistortable_2.h"
#endif
#if ANY_THERMISTOR_IS(3) // mendel-parts
  #include "thermistortable_3.h"
#endif
#if ANY_THERMISTOR_IS(4) // 10k thermistor
  #include "thermistortable_4.h"
#endif
#if ANY_THERMISTOR_IS(5) // 100k ParCan thermistor (104GT-2)
  #include "thermistortable_5.h"
#endif
#if ANY_THERMISTOR_IS(6) // 100k Epcos thermistor
  #include "thermistortable_6.h"
#endif
#if ANY_THERMISTOR_IS(7) // 100k Honeywell 135-104LAG-J01
  #include "thermistortable_7.h"
#endif
#if ANY_THERMISTOR_IS(71) // 100k Honeywell 135-104LAF-J01
  #include "thermistortable_71.h"
#endif
#if ANY_THERMISTOR_IS(8) // 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
  #include "thermistortable_8.h"
#endif
#if ANY_THERMISTOR_IS(9) // 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
  #include "thermistortable_9.h"
#endif
#if ANY_THERMISTOR_IS(10) // 100k RS thermistor 198-961 (4.7k pullup)
  #include "thermistortable_10.h"
#endif
#if ANY_THERMISTOR_IS(11) // QU-BD silicone bed QWG-104F-3950 thermistor
  #include "thermistortable_11.h"
#endif
#if ANY_THERMISTOR_IS(13) // Hisens thermistor B25/50 =3950 +/-1%
  #include "thermistortable_13.h"
#endif
#if ANY_THERMISTOR_IS(20) // PT100 with INA826 amp on Ultimaker v2.0 electronics
  #include "thermistortable_20.h"
#endif
#if ANY_THERMISTOR_IS(51) // 100k EPCOS (WITH 1kohm RESISTOR FOR PULLUP, R9 ON SANGUINOLOLU! NOT FOR 4.7kohm PULLUP! THIS IS NOT NORMAL!)
  #include "thermistortable_51.h"
#endif
#if ANY_THERMISTOR_IS(52) // 200k ATC Semitec 204GT-2 (WITH 1kohm RESISTOR FOR PULLUP, R9 ON SANGUINOLOLU! NOT FOR 4.7kohm PULLUP! THIS IS NOT NORMAL!)
  #include "thermistortable_52.h"
#endif
#if ANY_THERMISTOR_IS(55) // 100k ATC Semitec 104GT-2 (Used on ParCan) (WITH 1kohm RESISTOR FOR PULLUP, R9 ON SANGUINOLOLU! NOT FOR 4.7kohm PULLUP! THIS IS NOT NORMAL!)
  #include "thermistortable_55.h"
#endif
#if ANY_THERMISTOR_IS(60) // Maker's Tool Works Kapton Bed Thermistor
  #include "thermistortable_60.h"
#endif
#if ANY_THERMISTOR_IS(66) // DyzeDesign 500°C Thermistor
  #include "thermistortable_66.h"
#endif
#if ANY_THERMISTOR_IS(12) // 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
  #include "thermistortable_12.h"
#endif
#if ANY_THERMISTOR_IS(70) // bqh2 stock thermistor
  #include "thermistortable_70.h"
#endif
#if ANY_THERMISTOR_IS(75) // Many of the generic silicon heat pads use the MGB18-104F39050L32 Thermistor
  #include "thermistortable_75.h"
#endif
#if ANY_THERMISTOR_IS(110) // Pt100 with 1k0 pullup
  #include "thermistortable_110.h"
#endif
#if ANY_THERMISTOR_IS(147) // Pt100 with 4k7 pullup
  #include "thermistortable_147.h"
#endif
#if ANY_THERMISTOR_IS(1010) // Pt1000 with 1k0 pullup
  #include "thermistortable_1010.h"
#endif
#if ANY_THERMISTOR_IS(1047) // Pt1000 with 4k7 pullup
  #include "thermistortable_1047.h"
#endif
#if ANY_THERMISTOR_IS(998) // User-defined table 1
  #include "thermistortable_998.h"
#endif
#if ANY_THERMISTOR_IS(999) // User-defined table 2
  #include "thermistortable_999.h"
#endif

#define _TT_NAME(_N) temptable_ ## _N
#define TT_NAME(_N) _TT_NAME(_N)

#ifdef THERMISTORHEATER_0
  #define HEATER_0_TEMPTABLE TT_NAME(THERMISTORHEATER_0)
  #define HEATER_0_TEMPTABLE_LEN COUNT(HEATER_0_TEMPTABLE)
#elif defined(HEATER_0_USES_THERMISTOR)
  #error "No heater 0 thermistor table specified"
#else
  #define HEATER_0_TEMPTABLE NULL
  #define HEATER_0_TEMPTABLE_LEN 0
#endif

#ifdef THERMISTORHEATER_1
  #define HEATER_1_TEMPTABLE TT_NAME(THERMISTORHEATER_1)
  #define HEATER_1_TEMPTABLE_LEN COUNT(HEATER_1_TEMPTABLE)
#elif defined(HEATER_1_USES_THERMISTOR)
  #error "No heater 1 thermistor table specified"
#else
  #define HEATER_1_TEMPTABLE NULL
  #define HEATER_1_TEMPTABLE_LEN 0
#endif

#ifdef THERMISTORHEATER_2
  #define HEATER_2_TEMPTABLE TT_NAME(THERMISTORHEATER_2)
  #define HEATER_2_TEMPTABLE_LEN COUNT(HEATER_2_TEMPTABLE)
#elif defined(HEATER_2_USES_THERMISTOR)
  #error "No heater 2 thermistor table specified"
#else
  #define HEATER_2_TEMPTABLE NULL
  #define HEATER_2_TEMPTABLE_LEN 0
#endif

#ifdef THERMISTORHEATER_3
  #define HEATER_3_TEMPTABLE TT_NAME(THERMISTORHEATER_3)
  #define HEATER_3_TEMPTABLE_LEN COUNT(HEATER_3_TEMPTABLE)
#elif defined(HEATER_3_USES_THERMISTOR)
  #error "No heater 3 thermistor table specified"
#else
  #define HEATER_3_TEMPTABLE NULL
  #define HEATER_3_TEMPTABLE_LEN 0
#endif

#ifdef THERMISTORHEATER_4
  #define HEATER_4_TEMPTABLE TT_NAME(THERMISTORHEATER_4)
  #define HEATER_4_TEMPTABLE_LEN COUNT(HEATER_4_TEMPTABLE)
#elif defined(HEATER_4_USES_THERMISTOR)
  #error "No heater 4 thermistor table specified"
#else
  #define HEATER_4_TEMPTABLE NULL
  #define HEATER_4_TEMPTABLE_LEN 0
#endif

#ifdef THERMISTORBED
  #define BEDTEMPTABLE TT_NAME(THERMISTORBED)
  #define BEDTEMPTABLE_LEN COUNT(BEDTEMPTABLE)
#else
  #ifdef BED_USES_THERMISTOR
    #error "No bed thermistor table specified"
  #endif
#endif

// Set the high and low raw values for the heaters
// For thermistors the highest temperature results in the lowest ADC value
// For thermocouples the highest temperature results in the highest ADC value
#ifndef HEATER_0_RAW_HI_TEMP
  #ifdef HEATER_0_USES_THERMISTOR
    #define HEATER_0_RAW_HI_TEMP 0
    #define HEATER_0_RAW_LO_TEMP 16383
  #else
    #define HEATER_0_RAW_HI_TEMP 16383
    #define HEATER_0_RAW_LO_TEMP 0
  #endif
#endif
#ifndef HEATER_1_RAW_HI_TEMP
  #ifdef HEATER_1_USES_THERMISTOR
    #define HEATER_1_RAW_HI_TEMP 0
    #define HEATER_1_RAW_LO_TEMP 16383
  #else
    #define HEATER_1_RAW_HI_TEMP 16383
    #define HEATER_1_RAW_LO_TEMP 0
  #endif
#endif
#ifndef HEATER_2_RAW_HI_TEMP
  #ifdef HEATER_2_USES_THERMISTOR
    #define HEATER_2_RAW_HI_TEMP 0
    #define HEATER_2_RAW_LO_TEMP 16383
  #else
    #define HEATER_2_RAW_HI_TEMP 16383
    #define HEATER_2_RAW_LO_TEMP 0
  #endif
#endif
#ifndef HEATER_3_RAW_HI_TEMP
  #ifdef HEATER_3_USES_THERMISTOR
    #define HEATER_3_RAW_HI_TEMP 0
    #define HEATER_3_RAW_LO_TEMP 16383
  #else
    #define HEATER_3_RAW_HI_TEMP 16383
    #define HEATER_3_RAW_LO_TEMP 0
  #endif
#endif
#ifndef HEATER_4_RAW_HI_TEMP
  #ifdef HEATER_4_USES_THERMISTOR
    #define HEATER_4_RAW_HI_TEMP 0
    #define HEATER_4_RAW_LO_TEMP 16383
  #else
    #define HEATER_4_RAW_HI_TEMP 16383
    #define HEATER_4_RAW_LO_TEMP 0
  #endif
#endif
#ifndef HEATER_BED_RAW_HI_TEMP
  #ifdef BED_USES_THERMISTOR
    #define HEATER_BED_RAW_HI_TEMP 0
    #define HEATER_BED_RAW_LO_TEMP 16383
  #else
    #define HEATER_BED_RAW_HI_TEMP 16383
    #define HEATER_BED_RAW_LO_TEMP 0
  #endif
#endif

#endif // THERMISTORTABLES_H_
Further cleanup of comments, partial Doxygen-style Following up on #3231 9 years ago			`/**`
Added gplv3 header to all Marlin files 9 years ago			`* Marlin 3D Printer Firmware`
			`* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]`
			`*`
			`* Based on Sprinter and grbl.`
			`* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm`
			`*`
			`* This program is free software: you can redistribute it and/or modify`
			`* it under the terms of the GNU General Public License as published by`
			`* the Free Software Foundation, either version 3 of the License, or`
			`* (at your option) any later version.`
			`*`
			`* This program is distributed in the hope that it will be useful,`
			`* but WITHOUT ANY WARRANTY; without even the implied warranty of`
			`* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the`
			`* GNU General Public License for more details.`
			`*`
			`* You should have received a copy of the GNU General Public License`
			`* along with this program. If not, see <http://www.gnu.org/licenses/>.`
			`*`
			`*/`

first commit 13 years ago			`#ifndef THERMISTORTABLES_H_`
			`#define THERMISTORTABLES_H_`

simplified the includes, makefile now works with arduino23 13 years ago			`#include "Marlin.h"`
Add COUNT macro and apply 9 years ago			`#include "macros.h"`
and changed ultipanel to have the mm/sec and not mm/min Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1 Conflicts: Marlin/Marlin.pde Marlin/ultralcd.h 13 years ago
Merged Marlin, Marlin non gen6 and Ultimaker changes 13 years ago			`#define OVERSAMPLENR 16`
first commit 13 years ago
Header and pins changes to support 5 extruders 8 years ago			`#define ANY_THERMISTOR_IS(n) (THERMISTORHEATER_0 == n \|\| THERMISTORHEATER_1 == n \|\| THERMISTORHEATER_2 == n \|\| THERMISTORHEATER_3 == n \|\| THERMISTORHEATER_4 == n \|\| THERMISTORBED == n)`
Simpler/extensible thermistor test in thermistortables.h 8 years ago
Split up thermistor tables 8 years ago			`// Pt1000 and Pt100 handling`
			`//`
			`// Rt=R0(1+aT+bTT) [for T>0]`
			`// a=3.9083E-3, b=-5.775E-7`
			`#define PtA 3.9083E-3`
			`#define PtB -5.775E-7`
			`#define PtRt(T,R0) ((R0)(1.0+(PtA)(T)+(PtB)(T)(T)))`
			`#define PtAdVal(T,R0,Rup) (short)(1024/(Rup/PtRt(T,R0)+1))`
			`#define PtLine(T,R0,Rup) { PtAdVal(T,R0,Rup)*OVERSAMPLENR, T },`

Simpler/extensible thermistor test in thermistortables.h 8 years ago			`#if ANY_THERMISTOR_IS(1) // 100k bed thermistor`
Split up thermistor tables 8 years ago			`#include "thermistortable_1.h"`
first commit 13 years ago			`#endif`
Simpler/extensible thermistor test in thermistortables.h 8 years ago			`#if ANY_THERMISTOR_IS(2) // 200k bed thermistor`
Split up thermistor tables 8 years ago			`#include "thermistortable_2.h"`
first commit 13 years ago			`#endif`
Simpler/extensible thermistor test in thermistortables.h 8 years ago			`#if ANY_THERMISTOR_IS(3) // mendel-parts`
Split up thermistor tables 8 years ago			`#include "thermistortable_3.h"`
first commit 13 years ago			`#endif`
Simpler/extensible thermistor test in thermistortables.h 8 years ago			`#if ANY_THERMISTOR_IS(4) // 10k thermistor`
Split up thermistor tables 8 years ago			`#include "thermistortable_4.h"`
Added thermistor tables 13 years ago			`#endif`
Simpler/extensible thermistor test in thermistortables.h 8 years ago			`#if ANY_THERMISTOR_IS(5) // 100k ParCan thermistor (104GT-2)`
Split up thermistor tables 8 years ago			`#include "thermistortable_5.h"`
Added thermistor tables 13 years ago			`#endif`
Simpler/extensible thermistor test in thermistortables.h 8 years ago			`#if ANY_THERMISTOR_IS(6) // 100k Epcos thermistor`
Split up thermistor tables 8 years ago			`#include "thermistortable_6.h"`
Added thermistor tables 13 years ago			`#endif`
Simpler/extensible thermistor test in thermistortables.h 8 years ago			`#if ANY_THERMISTOR_IS(7) // 100k Honeywell 135-104LAG-J01`
Split up thermistor tables 8 years ago			`#include "thermistortable_7.h"`
Added thermistor tables 13 years ago			`#endif`
Simpler/extensible thermistor test in thermistortables.h 8 years ago			`#if ANY_THERMISTOR_IS(71) // 100k Honeywell 135-104LAF-J01`
Split up thermistor tables 8 years ago			`#include "thermistortable_71.h"`
Added Honeywell thermistor 135-104LAF-J01 11 years ago			`#endif`
Split up thermistor tables 8 years ago			`#if ANY_THERMISTOR_IS(8) // 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)`
			`#include "thermistortable_8.h"`
add RepRapPro Huxley thermistor tables 12 years ago			`#endif`
Split up thermistor tables 8 years ago			`#if ANY_THERMISTOR_IS(9) // 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)`
			`#include "thermistortable_9.h"`
add RepRapPro Huxley thermistor tables 12 years ago			`#endif`
Split up thermistor tables 8 years ago			`#if ANY_THERMISTOR_IS(10) // 100k RS thermistor 198-961 (4.7k pullup)`
			`#include "thermistortable_10.h"`
add RepRapPro Huxley thermistor tables 12 years ago			`#endif`
Split up thermistor tables 8 years ago			`#if ANY_THERMISTOR_IS(11) // QU-BD silicone bed QWG-104F-3950 thermistor`
			`#include "thermistortable_11.h"`
This table is made for thermistor 3950 (can be found on ebay for cheap) it's caracteristics are : R25℃ ;100KΩ±1% B Value(R25/50℃)：3990K 1% Dissipation Factor(mW/℃)：1.1~1.6 In still Air Thermal Time Constant(S)：10~17 In Still Air Operating temperature range： (-50~+260°C) Dimension： 1.8mm Dia X4.1mm Lead Length ：30mm This table was found on the following blogs: http://cae2100.wordpress.com/2014/03/08/beta3950-thermistor-table-for-marlin/ and http://microfabricator.com/articles/view/id/531ad7e59aad9d3131000000/beta-3950-thermistor-table-for-marlin 11 years ago			`#endif`
Split up thermistor tables 8 years ago			`#if ANY_THERMISTOR_IS(13) // Hisens thermistor B25/50 =3950 +/-1%`
			`#include "thermistortable_13.h"`
Update thermistortables.h Add another thermistor table,use with hotend "Simple ONE" & "All in ONE" 10 years ago			`#endif`
Simpler/extensible thermistor test in thermistortables.h 8 years ago			`#if ANY_THERMISTOR_IS(20) // PT100 with INA826 amp on Ultimaker v2.0 electronics`
Split up thermistor tables 8 years ago			`#include "thermistortable_20.h"`
Add 4th extruder 10 years ago			`#endif`
Split up thermistor tables 8 years ago			`#if ANY_THERMISTOR_IS(51) // 100k EPCOS (WITH 1kohm RESISTOR FOR PULLUP, R9 ON SANGUINOLOLU! NOT FOR 4.7kohm PULLUP! THIS IS NOT NORMAL!)`
			`#include "thermistortable_51.h"`
Update Marlin/thermistortables.h 13 years ago			`#endif`
Split up thermistor tables 8 years ago			`#if ANY_THERMISTOR_IS(52) // 200k ATC Semitec 204GT-2 (WITH 1kohm RESISTOR FOR PULLUP, R9 ON SANGUINOLOLU! NOT FOR 4.7kohm PULLUP! THIS IS NOT NORMAL!)`
			`#include "thermistortable_52.h"`
Update Marlin/thermistortables.h 13 years ago			`#endif`
Split up thermistor tables 8 years ago			`#if ANY_THERMISTOR_IS(55) // 100k ATC Semitec 104GT-2 (Used on ParCan) (WITH 1kohm RESISTOR FOR PULLUP, R9 ON SANGUINOLOLU! NOT FOR 4.7kohm PULLUP! THIS IS NOT NORMAL!)`
Misc. Clean Up (#6822) * Misc. Clean Up Mostly UBL related clean up. - But fixed a bug in the thermistortables. - Made G26 more responsive to user aborts. - Added sanity checks for older name for UBL_MESH_VALIDATION. - Made G29 P4 able to edit invalidated mesh points - Restore a reasonable Fade Height for UBL when creating new state information - Get UBL's Topology Map to look a little bit better - Make sure the user doesn't see a blank screen when doing Mesh Editing. * Huh??? GitHub Desktop screwed up! * get the planner object in scope * Fix out of scope z_fade_height * Travis timed out... I need a change so I can force a new commit and sync. 8 years ago			`#include "thermistortable_55.h"`
Update Marlin/thermistortables.h 13 years ago			`#endif`
Simpler/extensible thermistor test in thermistortables.h 8 years ago			`#if ANY_THERMISTOR_IS(60) // Maker's Tool Works Kapton Bed Thermistor`
Split up thermistor tables 8 years ago			`#include "thermistortable_60.h"`
Adding Maker's Tool Works heated bed thermistor 12 years ago			`#endif`
Split up thermistor tables 8 years ago			`#if ANY_THERMISTOR_IS(66) // DyzeDesign 500°C Thermistor`
			`#include "thermistortable_66.h"`
Dyze High Temp Thermistor Support 8 years ago			`#endif`
Split up thermistor tables 8 years ago			`#if ANY_THERMISTOR_IS(12) // 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)`
			`#include "thermistortable_12.h"`
Add 5DPrint D8 Driver Board info and temperature table for Makibox hot bed 11 years ago			`#endif`
Simpler/extensible thermistor test in thermistortables.h 8 years ago			`#if ANY_THERMISTOR_IS(70) // bqh2 stock thermistor`
Split up thermistor tables 8 years ago			`#include "thermistortable_70.h"`
Added configuration example for the BQ Hephestos 2 3D printer. Added support for BQ ZUM Mega 3D board and stock Hephestos 2 thermistor. 9 years ago			`#endif`
Add Thermistor 75: MGB18 silicon pad 8 years ago			`#if ANY_THERMISTOR_IS(75) // Many of the generic silicon heat pads use the MGB18-104F39050L32 Thermistor`
			`#include "thermistortable_75.h"`
			`#endif`
Simpler/extensible thermistor test in thermistortables.h 8 years ago			`#if ANY_THERMISTOR_IS(110) // Pt100 with 1k0 pullup`
Split up thermistor tables 8 years ago			`#include "thermistortable_110.h"`
Pt100 and Pt1000 temperature sensors handling 11 years ago			`#endif`
Simpler/extensible thermistor test in thermistortables.h 8 years ago			`#if ANY_THERMISTOR_IS(147) // Pt100 with 4k7 pullup`
Split up thermistor tables 8 years ago			`#include "thermistortable_147.h"`
Pt100 and Pt1000 temperature sensors handling 11 years ago			`#endif`
Simpler/extensible thermistor test in thermistortables.h 8 years ago			`#if ANY_THERMISTOR_IS(1010) // Pt1000 with 1k0 pullup`
Split up thermistor tables 8 years ago			`#include "thermistortable_1010.h"`
Pt100 and Pt1000 temperature sensors handling 11 years ago			`#endif`
Simpler/extensible thermistor test in thermistortables.h 8 years ago			`#if ANY_THERMISTOR_IS(1047) // Pt1000 with 4k7 pullup`
Split up thermistor tables 8 years ago			`#include "thermistortable_1047.h"`
Pt100 and Pt1000 temperature sensors handling 11 years ago			`#endif`
Split up thermistor tables 8 years ago			`#if ANY_THERMISTOR_IS(998) // User-defined table 1`
			`#include "thermistortable_998.h"`
Dummy Thermistor Table for testing purposes Am I the only one who always need to change the thermistortable.h to add a dummy table?? Ok, it is done. Just set the thermistor to 999 and it will always read 25C. Great for Testing or Development purposes. 10 years ago			`#endif`
Split up thermistor tables 8 years ago			`#if ANY_THERMISTOR_IS(999) // User-defined table 2`
			`#include "thermistortable_999.h"`
Extend the idea of dummy temperature sensors. Added a second sensor and made them configurable. 10 years ago			`#endif`
Dummy Thermistor Table for testing purposes Am I the only one who always need to change the thermistortable.h to add a dummy table?? Ok, it is done. Just set the thermistor to 999 and it will always read 25C. Great for Testing or Development purposes. 10 years ago
Working version of multiple extruders (up to 3) - The temperature control is pretty much complete (not sure what to do w/ autotemp though) Changed the pins assignment to clearly separate bed and extruder heaters and temp sensors, changed a bit how termistor tables are handled. - The steppers control is rudimentary (only chanages what pins it uses depending on the active_extruder var, but that's enough for switching extruder in the start.gcode in the the profiles) - Tested only w/ RAMPS 1.4 13 years ago			`#define _TT_NAME(_N) temptable_ ## _N`
			`#define TT_NAME(_N) _TT_NAME(_N)`
Added thermistor tables 13 years ago
Working version of multiple extruders (up to 3) - The temperature control is pretty much complete (not sure what to do w/ autotemp though) Changed the pins assignment to clearly separate bed and extruder heaters and temp sensors, changed a bit how termistor tables are handled. - The steppers control is rudimentary (only chanages what pins it uses depending on the active_extruder var, but that's enough for switching extruder in the start.gcode in the the profiles) - Tested only w/ RAMPS 1.4 13 years ago			`#ifdef THERMISTORHEATER_0`
Styling adjustments (PR#2668 & PR#2670) Keep "astyled" reformatting 9 years ago			`#define HEATER_0_TEMPTABLE TT_NAME(THERMISTORHEATER_0)`
			`#define HEATER_0_TEMPTABLE_LEN COUNT(HEATER_0_TEMPTABLE)`
Split up thermistor tables 8 years ago			`#elif defined(HEATER_0_USES_THERMISTOR)`
			`#error "No heater 0 thermistor table specified"`
Working version of multiple extruders (up to 3) - The temperature control is pretty much complete (not sure what to do w/ autotemp though) Changed the pins assignment to clearly separate bed and extruder heaters and temp sensors, changed a bit how termistor tables are handled. - The steppers control is rudimentary (only chanages what pins it uses depending on the active_extruder var, but that's enough for switching extruder in the start.gcode in the the profiles) - Tested only w/ RAMPS 1.4 13 years ago			`#else`
Split up thermistor tables 8 years ago			`#define HEATER_0_TEMPTABLE NULL`
			`#define HEATER_0_TEMPTABLE_LEN 0`
			`#endif`

			`#ifdef THERMISTORHEATER_1`
			`#define HEATER_1_TEMPTABLE TT_NAME(THERMISTORHEATER_1)`
			`#define HEATER_1_TEMPTABLE_LEN COUNT(HEATER_1_TEMPTABLE)`
			`#elif defined(HEATER_1_USES_THERMISTOR)`
			`#error "No heater 1 thermistor table specified"`
			`#else`
			`#define HEATER_1_TEMPTABLE NULL`
			`#define HEATER_1_TEMPTABLE_LEN 0`
Big temperature code update. No longer converts back and forwards between temperature and raw sample value. Reducing complexity, removing code. Also named some variables better. While keeping the safety intact and functionality the same. 12 years ago			`#endif`

Split up thermistor tables 8 years ago			`#ifdef THERMISTORHEATER_2`
			`#define HEATER_2_TEMPTABLE TT_NAME(THERMISTORHEATER_2)`
			`#define HEATER_2_TEMPTABLE_LEN COUNT(HEATER_2_TEMPTABLE)`
			`#elif defined(HEATER_2_USES_THERMISTOR)`
			`#error "No heater 2 thermistor table specified"`
			`#else`
			`#define HEATER_2_TEMPTABLE NULL`
			`#define HEATER_2_TEMPTABLE_LEN 0`
			`#endif`

			`#ifdef THERMISTORHEATER_3`
			`#define HEATER_3_TEMPTABLE TT_NAME(THERMISTORHEATER_3)`
			`#define HEATER_3_TEMPTABLE_LEN COUNT(HEATER_3_TEMPTABLE)`
			`#elif defined(HEATER_3_USES_THERMISTOR)`
			`#error "No heater 3 thermistor table specified"`
			`#else`
			`#define HEATER_3_TEMPTABLE NULL`
			`#define HEATER_3_TEMPTABLE_LEN 0`
			`#endif`

Header and pins changes to support 5 extruders 8 years ago			`#ifdef THERMISTORHEATER_4`
			`#define HEATER_4_TEMPTABLE TT_NAME(THERMISTORHEATER_4)`
			`#define HEATER_4_TEMPTABLE_LEN COUNT(HEATER_4_TEMPTABLE)`
			`#elif defined(HEATER_4_USES_THERMISTOR)`
			`#error "No heater 4 thermistor table specified"`
			`#else`
			`#define HEATER_4_TEMPTABLE NULL`
			`#define HEATER_4_TEMPTABLE_LEN 0`
			`#endif`

Split up thermistor tables 8 years ago			`#ifdef THERMISTORBED`
			`#define BEDTEMPTABLE TT_NAME(THERMISTORBED)`
			`#define BEDTEMPTABLE_LEN COUNT(BEDTEMPTABLE)`
			`#else`
			`#ifdef BED_USES_THERMISTOR`
			`#error "No bed thermistor table specified"`
			`#endif`
			`#endif`

			`// Set the high and low raw values for the heaters`
			`// For thermistors the highest temperature results in the lowest ADC value`
			`// For thermocouples the highest temperature results in the highest ADC value`
Big temperature code update. No longer converts back and forwards between temperature and raw sample value. Reducing complexity, removing code. Also named some variables better. While keeping the safety intact and functionality the same. 12 years ago			`#ifndef HEATER_0_RAW_HI_TEMP`
Split up thermistor tables 8 years ago			`#ifdef HEATER_0_USES_THERMISTOR`
Styling adjustments (PR#2668 & PR#2670) Keep "astyled" reformatting 9 years ago			`#define HEATER_0_RAW_HI_TEMP 0`
			`#define HEATER_0_RAW_LO_TEMP 16383`
Split up thermistor tables 8 years ago			`#else`
Styling adjustments (PR#2668 & PR#2670) Keep "astyled" reformatting 9 years ago			`#define HEATER_0_RAW_HI_TEMP 16383`
			`#define HEATER_0_RAW_LO_TEMP 0`
			`#endif`
Temperature changes 13 years ago			`#endif`
Big temperature code update. No longer converts back and forwards between temperature and raw sample value. Reducing complexity, removing code. Also named some variables better. While keeping the safety intact and functionality the same. 12 years ago			`#ifndef HEATER_1_RAW_HI_TEMP`
Split up thermistor tables 8 years ago			`#ifdef HEATER_1_USES_THERMISTOR`
Styling adjustments (PR#2668 & PR#2670) Keep "astyled" reformatting 9 years ago			`#define HEATER_1_RAW_HI_TEMP 0`
			`#define HEATER_1_RAW_LO_TEMP 16383`
Split up thermistor tables 8 years ago			`#else`
Styling adjustments (PR#2668 & PR#2670) Keep "astyled" reformatting 9 years ago			`#define HEATER_1_RAW_HI_TEMP 16383`
			`#define HEATER_1_RAW_LO_TEMP 0`
			`#endif`
Added thermistor tables 13 years ago			`#endif`
Big temperature code update. No longer converts back and forwards between temperature and raw sample value. Reducing complexity, removing code. Also named some variables better. While keeping the safety intact and functionality the same. 12 years ago			`#ifndef HEATER_2_RAW_HI_TEMP`
Split up thermistor tables 8 years ago			`#ifdef HEATER_2_USES_THERMISTOR`
Styling adjustments (PR#2668 & PR#2670) Keep "astyled" reformatting 9 years ago			`#define HEATER_2_RAW_HI_TEMP 0`
			`#define HEATER_2_RAW_LO_TEMP 16383`
Split up thermistor tables 8 years ago			`#else`
Styling adjustments (PR#2668 & PR#2670) Keep "astyled" reformatting 9 years ago			`#define HEATER_2_RAW_HI_TEMP 16383`
			`#define HEATER_2_RAW_LO_TEMP 0`
			`#endif`
Working version of multiple extruders (up to 3) - The temperature control is pretty much complete (not sure what to do w/ autotemp though) Changed the pins assignment to clearly separate bed and extruder heaters and temp sensors, changed a bit how termistor tables are handled. - The steppers control is rudimentary (only chanages what pins it uses depending on the active_extruder var, but that's enough for switching extruder in the start.gcode in the the profiles) - Tested only w/ RAMPS 1.4 13 years ago			`#endif`
Add 4th extruder 10 years ago			`#ifndef HEATER_3_RAW_HI_TEMP`
Split up thermistor tables 8 years ago			`#ifdef HEATER_3_USES_THERMISTOR`
Styling adjustments (PR#2668 & PR#2670) Keep "astyled" reformatting 9 years ago			`#define HEATER_3_RAW_HI_TEMP 0`
			`#define HEATER_3_RAW_LO_TEMP 16383`
Split up thermistor tables 8 years ago			`#else`
Styling adjustments (PR#2668 & PR#2670) Keep "astyled" reformatting 9 years ago			`#define HEATER_3_RAW_HI_TEMP 16383`
			`#define HEATER_3_RAW_LO_TEMP 0`
			`#endif`
Add 4th extruder 10 years ago			`#endif`
Additional 5 extruders support (solenoids, microstepping) 8 years ago			`#ifndef HEATER_4_RAW_HI_TEMP`
			`#ifdef HEATER_4_USES_THERMISTOR`
			`#define HEATER_4_RAW_HI_TEMP 0`
			`#define HEATER_4_RAW_LO_TEMP 16383`
			`#else`
			`#define HEATER_4_RAW_HI_TEMP 16383`
			`#define HEATER_4_RAW_LO_TEMP 0`
			`#endif`
			`#endif`
Big temperature code update. No longer converts back and forwards between temperature and raw sample value. Reducing complexity, removing code. Also named some variables better. While keeping the safety intact and functionality the same. 12 years ago			`#ifndef HEATER_BED_RAW_HI_TEMP`
Split up thermistor tables 8 years ago			`#ifdef BED_USES_THERMISTOR`
Styling adjustments (PR#2668 & PR#2670) Keep "astyled" reformatting 9 years ago			`#define HEATER_BED_RAW_HI_TEMP 0`
			`#define HEATER_BED_RAW_LO_TEMP 16383`
Split up thermistor tables 8 years ago			`#else`
Styling adjustments (PR#2668 & PR#2670) Keep "astyled" reformatting 9 years ago			`#define HEATER_BED_RAW_HI_TEMP 16383`
			`#define HEATER_BED_RAW_LO_TEMP 0`
			`#endif`
Big temperature code update. No longer converts back and forwards between temperature and raw sample value. Reducing complexity, removing code. Also named some variables better. While keeping the safety intact and functionality the same. 12 years ago			`#endif`
Added thermistor tables 13 years ago
Cosmetic changes and small fix for thermistortables.h ・Adjust spacing ・Standardize comments position ・Remove ',' at the tail of array 8 years ago			`#endif // THERMISTORTABLES_H_`