Marlin 2.0 for Flying Bear 4S/5
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

399 lines
19 KiB

/*
FPS.pde
>>> Before compiling: Please remove comment from the constructor of the
>>> connected graphics display (see below).
Universal 8bit Graphics Library, http://code.google.com/p/u8glib/
Copyright (c) 2012, olikraus@gmail.com
All rights reserved.
Redistribution and use in source and binary forms, with or without modification,
are permitted provided that the following conditions are met:
* Redistributions of source code must retain the above copyright notice, this list
of conditions and the following disclaimer.
* Redistributions in binary form must reproduce the above copyright notice, this
list of conditions and the following disclaimer in the documentation and/or other
materials provided with the distribution.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
ST7920_192X32, SPI: FPS: Box=7.6 @=9.8 iFPS: Box=11.4 @=14.7
ST7920_192X32, 8Bit: FPS: Box=6.2 @=7.5 iFPS: Box=9.3 @=11.2
DOGM128 SW SPI: FPS: Box=5.1 @=5.9 Pix=2.6 iFPS: Box=10.2 @=11.8 Pix=5.2
DOGM128 HW SPI: FPS: Box=5.5 @=6.3 iFPS: Box=11.0 @=12.6
DOGXL160 SW SPI: FPS: Box=1.7 @=1.9 iFPS: Box=6.9 @=7.7
DOGXL160 HW SPI: FPS: Box=1.8 @=2.1
NHD27OLED_BW, SW SPI: FPS: Box=3.0 @=3.7
NHD27OLED_BW, HW SPI: FPS: Box=3.5 @=4.5
NHD27OLED_2X_BW, SW SPI: FPS: Box=3.8 @=4.9
NHD27OLED_2X_BW, HW SPI: FPS: Box=4.6 @=6.4
30 Sep 2012
NHD27OLED_BW, SW SPI: FPS: Clip=9.2 Box=3.9 @=4.4 NEW_CODE
NHD27OLED_BW, SW SPI: FPS: Clip=9.2 Box=3.6 @=4.5
NHD27OLED_BW, HW SPI: FPS: Clip=16.3 Box=4.7 @=5.6
NHD27OLED_2X_BW, SW SPI: FPS: Clip=9.7 Box=4.5 @=5.8
NHD27OLED_2X_BW, SW SPI: FPS: Clip=18.0 Box=5.8 @=7.9
1 Oct 2012
ST7920_192X32, 8Bit: FPS: Box=7.2 @=10.0
DOGM128 SW SPI: FPS: Box=5.2 @=6.6 Pix=2.6
DOGM128 HW SPI: FPS: Clip=33.2 Box=5.5 @=7.1
DOGXL160 SW SPI: FPS: Box=1.7 @=2.0
DOGXL160 HW SPI: FPS: Box=1.8 @=2.2
DOGXL160 GR SW SPI: FPS: Box=1.1 @=1.3
1 Mar 2013
ST7920_192X32_1X, SPI: FPS: Clip=10.3 Box=5.5 @=7.2 Pix=3.9
ST7920_192X32_4X, SPI: FPS: Clip=10.9 Box=6.7 @=8.8 Pix=7.4
ST7920_192X32_1X, 8Bit: FPS: Clip=14.2 Box=6.1 @=8.4 Pix=4.2
ST7920_192X32_4X, 8Bit: FPS: Clip=14.2 Box=7.8 @=10.7 Pix=8.7
ST7920_192X32_1X, HW SPI: FPS: Clip=14.2 Box=6.3 @=8.7 Pix=4.3
ST7920_192X32_4X, HW SPI: FPS: Clip=15.3 Box=8.0 @=11.2 Pix=9.0
2 Jun 2013
U8GLIB_DOGM128 SW SPI: FPS: Clip=23.9 Box=4.5 @=6.6 Pix=2.1
U8GLIB_DOGM128_2X SW SPI: FPS: Clip=28.5 Box=6.6 @=9.7 Pix=3.9
U8GLIB_DOGM128_2X HW SPI: FPS: Clip=40.8 Box=7.1 @=10.8 Pix=4.1
3 Jun 2013
U8GLIB_ST7920_192X32_1X -Os SW SPI FPS: Clip=11.0 Box=5.4 @=7.1 Pix=3.9 Size=11828
U8GLIB_ST7920_192X32_1X -O3 SW SPI FPS: Clip=10.9 Box=5.6 @=7.5 Pix=4.0 Size=13800
U8GLIB_ST7920_192X32_1X -Os SW SPI FPS: Clip=16.8 Box=6.7 @=9.6 Pix=4.5 Size=11858 (new seq data output)
U8GLIB_ST7920_192X32_1X -Os HW SPI FPS: Clip=25.7 Box=7.5 @=11.3 Pix=4.8 (new seq data output)
6 Jun 2013
U8GLIB_DOGS102 u8g(13, 11, 10, 9); STD SW SPI FPS: Clip=9.5 Box=7.6 @=8.2 Pix=6.2 Size=15652
U8GLIB_DOGS102 u8g(13, 11, 10, 9); SW SPI FPS: Clip=19.1 Box=12.8 @=14.0 Pix=9.2 Size=15532
12 Jun 2013
SSD1351_128X128_332 SW SPI Clip=1.3 Box=0.7 @=0.9 Pix=0.4
SSD1351_128X128_332 HW SPI Clip=3.6 Box=1.1 @=1.5 Pix=0.5
24 Jun 2013
Uno SSD1351_128X128_332 SW SPI Clip=1.4 Box=0.8 @=0.9 Pix=0.4
Uno SSD1351_128X128_332 HW SPI Clip=4.4 Box=1.2 @=1.6 Pix=0.5
Uno SSD1351_128X128_HICOLOR HW SPI Clip=3.7 Box=0.8 @=1.0 Pix=0.3
Mega2560 SSD1351_128X128_332 HW SPI Clip=4.4 Box=1.2 @=1.6 Pix=0.5
Mega2560 SSD1351_128X128_4X_332 HW SPI Clip=4.6 Box=2.3 @=2.8 Pix=1.5
Mega2560 SSD1351_128X128_HICOLOR HW SPI Clip=3.6 Box=0.8 @=1.0 Pix=0.3
Mega2560 SSD1351_128X128_4X_HICOLOR HW SPI Clip=4.2 Box=1.7 @=2.1 Pix=1.0
Due SSD1351_128X128_332 HW SPI Clip=24.6 Box=6.3 @=7.8 Pix=2.8
Due SSD1351_128X128_4X_332 HW SPI Clip=28.1 Box=13.0 @=15.1 Pix=8.5
Due SSD1351_128X128_HICOLOR HW SPI Clip=20.8 Box=3.4 @=4.5 Pix=1.4
Due SSD1351_128X128_4X_HICOLOR HW SPI Clip=26.3 Box=8.9 @=11.1 Pix=4.8
Due SSD1351_128X128_4X_HICOLOR SW SPI Clip=0.4 Box=0.4 @=0.4 Pix=0.4
Due DOGS102 u8g(13, 11, 10, 9); SW SPI FPS: Clip=19.1 Box=13.1 @=14.3 Pix=9.4
Due DOGS102 u8g(10, 9); HW SPI FPS: Clip=128.9 Box=30.7 @=40.6 Pix=15.4
Due NHD27OLED_BW u8g(10, 9) HW SPI FPS: Clip=53.0 Box=19.6 @=23.8 Pix=10.6
Due NHD27OLED_2X_BW u8g(10, 9) HW SPI FPS: Clip=57.0 Box=25.3 @=31.7 Pix=18.1
Due NHD27OLED_GR u8g(10, 9) HW SPI FPS: Clip=34.1 Box=11.7 @=13.7 Pix=5.6
Due NHD27OLED_2X_GR u8g(10, 9) HW SPI FPS: Clip=38.1 Box=15.5 @=20.0 Pix=8.8
*/
#include "U8glib.h"
// setup u8g object, please remove comment from one of the following constructor calls
// IMPORTANT NOTE: The following list is incomplete. The complete list of supported
// devices with all constructor calls is here: http://code.google.com/p/u8glib/wiki/device
//U8GLIB_NHD27OLED_BW u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_NHD27OLED_2X_BW u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_NHD27OLED_GR u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_NHD27OLED_2X_GR u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_NHD31OLED_BW u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_NHD31OLED_2X_BW u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_NHD31OLED_GR u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_NHD31OLED_2X_GR u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_DOGS102 u8g(13, 11, 10, 9, 8); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_DOGM132 u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_DOGM128 u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_DOGM128_2X u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_ST7920_128X64_1X u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 17, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, di=17,rw=16
//U8GLIB_ST7920_128X64_4X u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 17, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, di=17,rw=16
//U8GLIB_ST7920_128X64_1X u8g(18, 16, 17); // SPI Com: SCK = en = 18, MOSI = rw = 16, CS = di = 17
//U8GLIB_ST7920_128X64_4X u8g(18, 16, 17); // SPI Com: SCK = en = 18, MOSI = rw = 16, CS = di = 17
//U8GLIB_ST7920_192X32_1X u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 17, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, di=17,rw=16
//U8GLIB_ST7920_192X32_4X u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 17, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, di=17,rw=16
//U8GLIB_ST7920_192X32_1X u8g(18, 16, 17); // SPI Com: SCK = en = 18, MOSI = rw = 16, CS = di = 17
//U8GLIB_ST7920_192X32_4X u8g(18, 16, 17); // SPI Com: SCK = en = 18, MOSI = rw = 16, CS = di = 17
//U8GLIB_ST7920_192X32_1X u8g(13, 11, 10); // SPI Com: SCK = en = 13, MOSI = rw = 11, CS = di = 10
//U8GLIB_ST7920_192X32_4X u8g(10); // SPI Com: SCK = en = 13, MOSI = rw = 11, CS = di = 10, HW SPI
//U8GLIB_ST7920_202X32_1X u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 17, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, di=17,rw=16
//U8GLIB_ST7920_202X32_4X u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 17, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, di=17,rw=16
//U8GLIB_ST7920_202X32_1X u8g(18, 16, 17); // SPI Com: SCK = en = 18, MOSI = rw = 16, CS = di = 17
//U8GLIB_ST7920_202X32_4X u8g(18, 16, 17); // SPI Com: SCK = en = 18, MOSI = rw = 16, CS = di = 17
//U8GLIB_LM6059 u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_LM6063 u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_DOGXL160_BW u8g(10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_DOGXL160_GR u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_DOGXL160_2X_BW u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_DOGXL160_2X_GR u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_PCD8544 u8g(13, 11, 10, 9, 8); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, Reset = 8
//U8GLIB_PCF8812 u8g(13, 11, 10, 9, 8); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, Reset = 8
//U8GLIB_KS0108_128 u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 14, 15, 17, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, cs1=14, cs2=15,di=17,rw=16
//U8GLIB_LC7981_160X80 u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 14, 15, 17, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, cs=14 ,di=15,rw=17, reset = 16
//U8GLIB_LC7981_240X64 u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 14, 15, 17, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, cs=14 ,di=15,rw=17, reset = 16
//U8GLIB_LC7981_240X128 u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 14, 15, 17, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, cs=14 ,di=15,rw=17, reset = 16
//U8GLIB_ILI9325D_320x240 u8g(18,17,19,U8G_PIN_NONE,16 ); // 8Bit Com: D0..D7: 0,1,2,3,4,5,6,7 en=wr=18, cs=17, rs=19, rd=U8G_PIN_NONE, reset = 16
//U8GLIB_SBN1661_122X32 u8g(8,9,10,11,4,5,6,7,14,15, 17, U8G_PIN_NONE, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 cs1=14, cs2=15,di=17,rw=16,reset = 16
//U8GLIB_SSD1306_128X64 u8g(13, 11, 10, 9); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_SSD1306_128X64 u8g(4, 5, 6, 7); // SW SPI Com: SCK = 4, MOSI = 5, CS = 6, A0 = 7 (new white HalTec OLED)
//U8GLIB_SSD1306_128X64 u8g(10, 9); // HW SPI Com: CS = 10, A0 = 9 (Hardware Pins are SCK = 13 and MOSI = 11)
//U8GLIB_SSD1306_128X64 u8g(U8G_I2C_OPT_NONE|U8G_I2C_OPT_DEV_0); // I2C / TWI
//U8GLIB_SSD1306_128X64 u8g(U8G_I2C_OPT_DEV_0|U8G_I2C_OPT_NO_ACK|U8G_I2C_OPT_FAST); // Fast I2C / TWI
//U8GLIB_SSD1306_128X64 u8g(U8G_I2C_OPT_NO_ACK); // Display which does not send AC
//U8GLIB_SSD1306_ADAFRUIT_128X64 u8g(13, 11, 10, 9); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_SSD1306_ADAFRUIT_128X64 u8g(10, 9); // HW SPI Com: CS = 10, A0 = 9 (Hardware Pins are SCK = 13 and MOSI = 11)
//U8GLIB_SSD1306_128X32 u8g(13, 11, 10, 9); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_SSD1306_128X32 u8g(10, 9); // HW SPI Com: CS = 10, A0 = 9 (Hardware Pins are SCK = 13 and MOSI = 11)
//U8GLIB_SSD1306_128X32 u8g(U8G_I2C_OPT_NONE); // I2C / TWI
//U8GLIB_SH1106_128X64 u8g(13, 11, 10, 9); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_SH1106_128X64 u8g(4, 5, 6, 7); // SW SPI Com: SCK = 4, MOSI = 5, CS = 6, A0 = 7 (new blue HalTec OLED)
//U8GLIB_SH1106_128X64 u8g(U8G_I2C_OPT_NONE); // I2C / TWI
//U8GLIB_SH1106_128X64 u8g(U8G_I2C_OPT_DEV_0|U8G_I2C_OPT_FAST); // Dev 0, Fast I2C / TWI
//U8GLIB_SH1106_128X64 u8g(U8G_I2C_OPT_NO_ACK); // Display which does not send ACK
//U8GLIB_SSD1309_128X64 u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_SSD1327_96X96_GR u8g(U8G_I2C_OPT_NONE); // I2C
//U8GLIB_SSD1327_96X96_2X_GR u8g(U8G_I2C_OPT_NONE); // I2C
//U8GLIB_UC1611_DOGM240 u8g(U8G_I2C_OPT_NONE); // I2C
//U8GLIB_UC1611_DOGM240 u8g(13, 11, 10, 9); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_UC1611_DOGM240 u8g(10, 9); // HW SPI Com: CS = 10, A0 = 9 (Hardware Pins are SCK = 13 and MOSI = 11)
//U8GLIB_UC1611_DOGXL240 u8g(U8G_I2C_OPT_NONE); // I2C
//U8GLIB_UC1611_DOGXL240 u8g(13, 11, 10, 9); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
//U8GLIB_UC1611_DOGXL240 u8g(10, 9); // HW SPI Com: CS = 10, A0 = 9 (Hardware Pins are SCK = 13 and MOSI = 11)
//U8GLIB_NHD_C12864 u8g(13, 11, 10, 9, 8); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_NHD_C12832 u8g(13, 11, 10, 9, 8); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_LD7032_60x32 u8g(13, 11, 10, 9, 8); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_LD7032_60x32 u8g(11, 12, 9, 10, 8); // SPI Com: SCK = 11, MOSI = 12, CS = 9, A0 = 10, RST = 8 (SW SPI Nano Board)
//U8GLIB_UC1608_240X64 u8g(13, 11, 10, 9, 8); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_UC1608_240X64_2X u8g(13, 11, 10, 9, 8); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_UC1608_240X64 u8g(10, 9, 8); // HW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_UC1608_240X64_2X u8g(10, 9, 8); // HW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_UC1608_240X u8g(13, 11, 10, 9, 8); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_UC1608_240X64_2X u8g(13, 11, 10, 9, 8); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_UC1608_240X64 u8g(10, 9, 8); // HW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_UC1608_240X64_2X u8g(10, 9, 8); // HW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
//U8GLIB_T6963_240X128 u8g(8, 9, 10, 11, 4, 5, 6, 7, 14, 15, 17, 18, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7, cs=14, a0=15, wr=17, rd=18, reset=16
//U8GLIB_T6963_128X128 u8g(8, 9, 10, 11, 4, 5, 6, 7, 14, 15, 17, 18, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7, cs=14, a0=15, wr=17, rd=18, reset=16
//U8GLIB_T6963_240X64 u8g(8, 9, 10, 11, 4, 5, 6, 7, 14, 15, 17, 18, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7, cs=14, a0=15, wr=17, rd=18, reset=16
//U8GLIB_T6963_128X64 u8g(8, 9, 10, 11, 4, 5, 6, 7, 14, 15, 17, 18, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7, cs=14, a0=15, wr=17, rd=18, reset=16
//U8GLIB_HT1632_24X16 u8g(3, 2, 4); // WR = 3, DATA = 2, CS = 4
//U8GLIB_SSD1351_128X128_332 u8g(13, 11, 8, 9, 7); // Arduino UNO: SW SPI Com: SCK = 13, MOSI = 11, CS = 8, A0 = 9, RESET = 7 (http://electronics.ilsoft.co.uk/ArduinoShield.aspx)
//U8GLIB_SSD1351_128X128_332 u8g(76, 75, 8, 9, 7); // Arduino DUE: SW SPI Com: SCK = 13, MOSI = 11, CS = 8, A0 = 9, RESET = 7 (http://electronics.ilsoft.co.uk/ArduinoShield.aspx)
//U8GLIB_SSD1351_128X128_332 u8g(8, 9, 7); // Arduino: HW SPI Com: SCK = 13, MOSI = 11, CS = 8, A0 = 9, RESET = 7 (http://electronics.ilsoft.co.uk/ArduinoShield.aspx)
//U8GLIB_SSD1351_128X128_HICOLOR u8g(76, 75, 8, 9, 7); // Arduino DUE, SW SPI Com: SCK = 76, MOSI = 75, CS = 8, A0 = 9, RESET = 7 (http://electronics.ilsoft.co.uk/ArduinoShield.aspx)
//U8GLIB_SSD1351_128X128_HICOLOR u8g(8, 9, 7); // Arduino, HW SPI Com: SCK = 76, MOSI = 75, CS = 8, A0 = 9, RESET = 7 (http://electronics.ilsoft.co.uk/ArduinoShield.aspx)
//U8GLIB_SSD1351_128X128GH_332 u8g(8, 9, 7); // Arduino, HW SPI Com: SCK = 76, MOSI = 75, CS = 8, A0 = 9, RESET = 7 (Freetronics OLED)
//U8GLIB_SSD1351_128X128GH_HICOLOR u8g(8, 9, 7); // Arduino, HW SPI Com: SCK = 76, MOSI = 75, CS = 8, A0 = 9, RESET = 7 (Freetronics OLED)
#define SECONDS 10
uint8_t flip_color = 0;
uint8_t draw_color = 1;
void draw_set_screen(void) {
// graphic commands to redraw the complete screen should be placed here
if ( u8g.getMode() == U8G_MODE_HICOLOR ) {
if ( flip_color == 0 )
u8g.setHiColorByRGB(0,0,0);
else
u8g.setHiColorByRGB(255,255,255);
}
else {
u8g.setColorIndex(flip_color);
}
u8g.drawBox( 0, 0, u8g.getWidth(), u8g.getHeight() );
}
void draw_clip_test(void) {
u8g_uint_t i, j, k;
char buf[3] = "AB";
k = 0;
if ( u8g.getMode() == U8G_MODE_HICOLOR ) {
u8g.setHiColorByRGB(255,255,255);
}
else {
u8g.setColorIndex(draw_color);
}
u8g.setFont(u8g_font_6x10);
for( i = 0; i < 6; i++ ) {
for( j = 1; j < 8; j++ ) {
u8g.drawHLine(i-3, k, j);
u8g.drawHLine(i-3+10, k, j);
u8g.drawVLine(k+20, i-3, j);
u8g.drawVLine(k+20, i-3+10, j);
k++;
}
}
u8g.drawStr(0-3, 50, buf);
u8g.drawStr180(0+3, 50, buf);
u8g.drawStr(u8g.getWidth()-3, 40, buf);
u8g.drawStr180(u8g.getWidth()+3, 40, buf);
u8g.drawStr90(u8g.getWidth()-10, 0-3, buf);
u8g.drawStr270(u8g.getWidth()-10, 3, buf);
u8g.drawStr90(u8g.getWidth()-20, u8g.getHeight()-3, buf);
u8g.drawStr270(u8g.getWidth()-20, u8g.getHeight()+3, buf);
}
void draw_char(void) {
char buf[2] = "@";
u8g_uint_t i, j;
// graphic commands to redraw the complete screen should be placed here
if ( u8g.getMode() == U8G_MODE_HICOLOR ) {
u8g.setHiColorByRGB(255,255,255);
}
else {
u8g.setColorIndex(draw_color);
}
u8g.setFont(u8g_font_6x10);
j = 8;
for(;;) {
i = 0;
for(;;) {
u8g.drawStr( i, j, buf);
i += 8;
if ( i > u8g.getWidth() )
break;
}
j += 8;
if ( j > u8g.getHeight() )
break;
}
}
void draw_pixel(void) {
u8g_uint_t x, y, w2, h2;
if ( u8g.getMode() == U8G_MODE_HICOLOR ) {
u8g.setHiColorByRGB(255,255,255);
}
else {
u8g.setColorIndex(draw_color);
}
w2 = u8g.getWidth();
h2 = u8g.getHeight();
w2 /= 2;
h2 /= 2;
for( y = 0; y < h2; y++ ) {
for( x = 0; x < w2; x++ ) {
if ( (x + y) & 1 ) {
u8g.drawPixel(x,y);
u8g.drawPixel(x,y+h2);
u8g.drawPixel(x+w2,y);
u8g.drawPixel(x+w2,y+h2);
}
}
}
}
// returns unadjusted FPS
uint16_t picture_loop_with_fps(void (*draw_fn)(void)) {
uint16_t FPS10 = 0;
uint32_t time;
time = millis() + SECONDS*1000;
// picture loop
do {
u8g.firstPage();
do {
draw_fn();
} while( u8g.nextPage() );
FPS10++;
flip_color = flip_color ^ 1;
} while( millis() < time );
return FPS10;
}
const char *convert_FPS(uint16_t fps) {
static char buf[6];
strcpy(buf, u8g_u8toa( (uint8_t)(fps/10), 3));
buf[3] = '.';
buf[4] = (fps % 10) + '0';
buf[5] = '\0';
return buf;
}
void show_result(const char *s, uint16_t fps) {
// assign default color value
if ( u8g.getMode() == U8G_MODE_HICOLOR ) {
u8g.setHiColorByRGB(255,255,255);
}
else {
u8g.setColorIndex(draw_color);
}
u8g.setFont(u8g_font_8x13B);
u8g.firstPage();
do {
u8g.drawStr(0,12, s);
u8g.drawStr(0,24, convert_FPS(fps));
} while( u8g.nextPage() );
}
void setup(void) {
// flip screen, if required
// u8g.setRot180();
// assign default color value
if ( u8g.getMode() == U8G_MODE_R3G3B2 )
draw_color = 255; // white
else if ( u8g.getMode() == U8G_MODE_GRAY2BIT )
draw_color = 3; // max intensity
else if ( u8g.getMode() == U8G_MODE_BW )
draw_color = 1; // pixel on
else if ( u8g.getMode() == U8G_MODE_HICOLOR ) {
u8g.setHiColorByRGB(255,255,255);
}
}
void loop(void) {
uint16_t fps;
fps = picture_loop_with_fps(draw_clip_test);
show_result("draw clip test", fps);
delay(5000);
fps = picture_loop_with_fps(draw_set_screen);
show_result("clear screen", fps);
delay(5000);
fps = picture_loop_with_fps(draw_char);
show_result("draw @", fps);
delay(5000);
fps = picture_loop_with_fps(draw_pixel);
show_result("draw pixel", fps);
delay(5000);
}