Marlin_FB4S/Marlin/pins_5DPRINT.h

/**
 * Marlin 3D Printer Firmware
 * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 3 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <http://www.gnu.org/licenses/>.
 *
 */

/**
 * 5DPrint D8 Driver board pin assignments
 *
 * https://bitbucket.org/makible/5dprint-d8-controller-board
 */

#ifndef __AVR_AT90USB1286__
  #error "Oops!  Make sure you have 'Teensy++ 2.0' selected from the 'Tools -> Boards' menu."
#endif

#define DEFAULT_MACHINE_NAME "Makibox"
#define BOARD_NAME           "5DPrint D8"

#define LARGE_FLASH        true

#define X_STEP_PIN          0
#define X_DIR_PIN           1
#define X_ENABLE_PIN       23
#define X_STOP_PIN         37

#define Y_STEP_PIN          2
#define Y_DIR_PIN           3
#define Y_ENABLE_PIN       19
#define Y_STOP_PIN         36

#define Z_STEP_PIN          4
#define Z_DIR_PIN           5
#define Z_ENABLE_PIN       18
#define Z_STOP_PIN         39

#define E0_STEP_PIN         6
#define E0_DIR_PIN          7
#define E0_ENABLE_PIN      17

#define HEATER_0_PIN       21  // Extruder
#define HEATER_BED_PIN     20  // Bed
// You may need to change FAN_PIN to 16 because Marlin isn't using fastio.h
// for the fan and Teensyduino uses a different pin mapping.
#define FAN_PIN            16  // Fan

#define TEMP_0_PIN          1  // Extruder / Analog pin numbering
#define TEMP_BED_PIN        0  // Bed / Analog pin numbering

// The SDSS pin uses a different pin mapping from file fastio.h
#define SDSS               20

// Microstepping pins
// Note that the pin mapping is not from fastio.h
// See Sd2PinMap.h for the pin configurations ???
#define X_MS1_PIN 25
#define X_MS2_PIN 26
#define Y_MS1_PIN 9
#define Y_MS2_PIN 8
#define Z_MS1_PIN 7
#define Z_MS2_PIN 6
#define E0_MS1_PIN 5
#define E0_MS2_PIN 4
Further cleanup of comments, partial Doxygen-style Following up on #3231 9 years ago			`/**`
Added gplv3 header to all Marlin files 9 years ago			`* Marlin 3D Printer Firmware`
			`* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]`
			`*`
			`* Based on Sprinter and grbl.`
			`* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm`
			`*`
			`* This program is free software: you can redistribute it and/or modify`
			`* it under the terms of the GNU General Public License as published by`
			`* the Free Software Foundation, either version 3 of the License, or`
			`* (at your option) any later version.`
			`*`
			`* This program is distributed in the hope that it will be useful,`
			`* but WITHOUT ANY WARRANTY; without even the implied warranty of`
			`* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the`
			`* GNU General Public License for more details.`
			`*`
			`* You should have received a copy of the GNU General Public License`
			`* along with this program. If not, see <http://www.gnu.org/licenses/>.`
			`*`
			`*/`

Split up pins to make it more manageable Hopefully this is helpful to organization and future expansion…. 10 years ago			`/**`
			`* 5DPrint D8 Driver board pin assignments`
			`*`
			`* https://bitbucket.org/makible/5dprint-d8-controller-board`
			`*/`

			`#ifndef __AVR_AT90USB1286__`
Enclose all #error strings with apostrophes 9 years ago			`#error "Oops! Make sure you have 'Teensy++ 2.0' selected from the 'Tools -> Boards' menu."`
Split up pins to make it more manageable Hopefully this is helpful to organization and future expansion…. 10 years ago			`#endif`

Move default machine info to pins files 9 years ago			`#define DEFAULT_MACHINE_NAME "Makibox"`
Add "About Printer" information menu. Includes: firmware version / branch / date. extruder count board information (name, serial details, power supply type) thermistors (names, min/max temperatures) *printer statistics (PRINTCOUNTER details) Thanks to @thinkyhead for contributions. 8 years ago			`#define BOARD_NAME "5DPrint D8"`
Move default machine info to pins files 9 years ago
Split up pins to make it more manageable Hopefully this is helpful to organization and future expansion…. 10 years ago			`#define LARGE_FLASH true`

			`#define X_STEP_PIN 0`
			`#define X_DIR_PIN 1`
			`#define X_ENABLE_PIN 23`
			`#define X_STOP_PIN 37`

			`#define Y_STEP_PIN 2`
			`#define Y_DIR_PIN 3`
			`#define Y_ENABLE_PIN 19`
			`#define Y_STOP_PIN 36`

			`#define Z_STEP_PIN 4`
			`#define Z_DIR_PIN 5`
			`#define Z_ENABLE_PIN 18`
			`#define Z_STOP_PIN 39`

			`#define E0_STEP_PIN 6`
			`#define E0_DIR_PIN 7`
			`#define E0_ENABLE_PIN 17`

			`#define HEATER_0_PIN 21 // Extruder`
			`#define HEATER_BED_PIN 20 // Bed`
			`// You may need to change FAN_PIN to 16 because Marlin isn't using fastio.h`
			`// for the fan and Teensyduino uses a different pin mapping.`
			`#define FAN_PIN 16 // Fan`

			`#define TEMP_0_PIN 1 // Extruder / Analog pin numbering`
			`#define TEMP_BED_PIN 0 // Bed / Analog pin numbering`

Switch SD2cadrLib to fastio Replace all fastDigitalRead/Write() with READ/WRITE() Define SCK_PIN, MISO_PIN, MOSI_PIN in pins.h if not already defined in the pins_*.h files. Remove these conditional pin definitions from the pin-files. They are now always defined. Define separate sets of SPI-pins for AT90USB with and without Teensy support in fastio.h. Likely this was the main reason for all that confusion about the AT90USB-SPI pins. 8 years ago			`// The SDSS pin uses a different pin mapping from file fastio.h`
Split up pins to make it more manageable Hopefully this is helpful to organization and future expansion…. 10 years ago			`#define SDSS 20`

			`// Microstepping pins`
			`// Note that the pin mapping is not from fastio.h`
Switch SD2cadrLib to fastio Replace all fastDigitalRead/Write() with READ/WRITE() Define SCK_PIN, MISO_PIN, MOSI_PIN in pins.h if not already defined in the pins_*.h files. Remove these conditional pin definitions from the pin-files. They are now always defined. Define separate sets of SPI-pins for AT90USB with and without Teensy support in fastio.h. Likely this was the main reason for all that confusion about the AT90USB-SPI pins. 8 years ago			`// See Sd2PinMap.h for the pin configurations ???`
Split up pins to make it more manageable Hopefully this is helpful to organization and future expansion…. 10 years ago			`#define X_MS1_PIN 25`
			`#define X_MS2_PIN 26`
			`#define Y_MS1_PIN 9`
			`#define Y_MS2_PIN 8`
			`#define Z_MS1_PIN 7`
			`#define Z_MS2_PIN 6`
			`#define E0_MS1_PIN 5`
			`#define E0_MS2_PIN 4`