Marlin 2.0 for Flying Bear 4S/5
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

525 lines
20 KiB

/**
* Marlin 3D Printer Firmware
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
//
// Filament Change Menu
//
#include "../../inc/MarlinConfigPre.h"
#if HAS_LCD_MENU && ENABLED(ADVANCED_PAUSE_FEATURE)
#include "menu.h"
#include "../../module/temperature.h"
#include "../../feature/pause.h"
#if HAS_FILAMENT_SENSOR
#include "../../feature/runout.h"
#endif
//
// Change Filament > Change/Unload/Load Filament
//
static AdvancedPauseMode _change_filament_temp_mode; // =ADVANCED_PAUSE_MODE_PAUSE_PRINT
static int8_t _change_filament_temp_extruder; // =0
inline PGM_P _change_filament_temp_command() {
switch (_change_filament_temp_mode) {
case ADVANCED_PAUSE_MODE_LOAD_FILAMENT:
return PSTR("M701 T%d");
case ADVANCED_PAUSE_MODE_UNLOAD_FILAMENT:
return _change_filament_temp_extruder >= 0 ? PSTR("M702 T%d") : PSTR("M702 ;%d");
case ADVANCED_PAUSE_MODE_PAUSE_PRINT:
default:
return PSTR("M600 B0 T%d");
}
return PSTR(MSG_FILAMENTCHANGE);
}
static void _change_filament_temp(const uint16_t temperature) {
char cmd[11];
sprintf_P(cmd, _change_filament_temp_command(), _change_filament_temp_extruder);
thermalManager.setTargetHotend(temperature, _change_filament_temp_extruder);
lcd_enqueue_command(cmd);
}
inline void _lcd_change_filament_temp_1_func() { _change_filament_temp(ui.preheat_hotend_temp[0]); }
inline void _lcd_change_filament_temp_2_func() { _change_filament_temp(ui.preheat_hotend_temp[1]); }
inline void _lcd_change_filament_temp_custom_cb() { _change_filament_temp(thermalManager.target_temperature[_change_filament_temp_extruder]); }
static PGM_P change_filament_header(const AdvancedPauseMode mode) {
switch (mode) {
case ADVANCED_PAUSE_MODE_LOAD_FILAMENT:
return PSTR(MSG_FILAMENTLOAD);
case ADVANCED_PAUSE_MODE_UNLOAD_FILAMENT:
return PSTR(MSG_FILAMENTUNLOAD);
default: break;
}
return PSTR(MSG_FILAMENTCHANGE);
}
void _menu_temp_filament_op(const AdvancedPauseMode mode, const int8_t extruder) {
_change_filament_temp_mode = mode;
_change_filament_temp_extruder = extruder;
START_MENU();
if (LCD_HEIGHT >= 4) STATIC_ITEM_P(change_filament_header(mode), true, true);
MENU_BACK(MSG_BACK);
MENU_ITEM(function, MSG_PREHEAT_1, _lcd_change_filament_temp_1_func);
MENU_ITEM(function, MSG_PREHEAT_2, _lcd_change_filament_temp_2_func);
uint16_t max_temp;
switch (extruder) {
default: max_temp = HEATER_0_MAXTEMP;
#if HOTENDS > 1
case 1: max_temp = HEATER_1_MAXTEMP; break;
#if HOTENDS > 2
case 2: max_temp = HEATER_2_MAXTEMP; break;
#if HOTENDS > 3
case 3: max_temp = HEATER_3_MAXTEMP; break;
#if HOTENDS > 4
case 4: max_temp = HEATER_4_MAXTEMP; break;
#if HOTENDS > 5
case 5: max_temp = HEATER_5_MAXTEMP; break;
#endif
#endif
#endif
#endif
#endif
}
MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(int3, MSG_PREHEAT_CUSTOM, &thermalManager.target_temperature[_change_filament_temp_extruder], EXTRUDE_MINTEMP, max_temp - 15, _lcd_change_filament_temp_custom_cb);
END_MENU();
}
void menu_temp_e0_filament_change() { _menu_temp_filament_op(ADVANCED_PAUSE_MODE_PAUSE_PRINT, 0); }
void menu_temp_e0_filament_load() { _menu_temp_filament_op(ADVANCED_PAUSE_MODE_LOAD_FILAMENT, 0); }
void menu_temp_e0_filament_unload() { _menu_temp_filament_op(ADVANCED_PAUSE_MODE_UNLOAD_FILAMENT, 0); }
#if E_STEPPERS > 1
void menu_temp_e1_filament_change() { _menu_temp_filament_op(ADVANCED_PAUSE_MODE_PAUSE_PRINT, 1); }
void menu_temp_e1_filament_load() { _menu_temp_filament_op(ADVANCED_PAUSE_MODE_LOAD_FILAMENT, 1); }
void menu_temp_e1_filament_unload() { _menu_temp_filament_op(ADVANCED_PAUSE_MODE_UNLOAD_FILAMENT, 1); }
#if ENABLED(FILAMENT_UNLOAD_ALL_EXTRUDERS)
void menu_unload_filament_all_temp() { _menu_temp_filament_op(ADVANCED_PAUSE_MODE_UNLOAD_FILAMENT, -1); }
#endif
#if E_STEPPERS > 2
void menu_temp_e2_filament_change() { _menu_temp_filament_op(ADVANCED_PAUSE_MODE_PAUSE_PRINT, 2); }
void menu_temp_e2_filament_load() { _menu_temp_filament_op(ADVANCED_PAUSE_MODE_LOAD_FILAMENT, 2); }
void menu_temp_e2_filament_unload() { _menu_temp_filament_op(ADVANCED_PAUSE_MODE_UNLOAD_FILAMENT, 2); }
#if E_STEPPERS > 3
void menu_temp_e3_filament_change() { _menu_temp_filament_op(ADVANCED_PAUSE_MODE_PAUSE_PRINT, 3); }
void menu_temp_e3_filament_load() { _menu_temp_filament_op(ADVANCED_PAUSE_MODE_LOAD_FILAMENT, 3); }
void menu_temp_e3_filament_unload() { _menu_temp_filament_op(ADVANCED_PAUSE_MODE_UNLOAD_FILAMENT, 3); }
#if E_STEPPERS > 4
void menu_temp_e4_filament_change() { _menu_temp_filament_op(ADVANCED_PAUSE_MODE_PAUSE_PRINT, 4); }
void menu_temp_e4_filament_load() { _menu_temp_filament_op(ADVANCED_PAUSE_MODE_LOAD_FILAMENT, 4); }
void menu_temp_e4_filament_unload() { _menu_temp_filament_op(ADVANCED_PAUSE_MODE_UNLOAD_FILAMENT, 4); }
#endif // E_STEPPERS > 4
#endif // E_STEPPERS > 3
#endif // E_STEPPERS > 2
#endif // E_STEPPERS > 1
/**
*
* "Change Filament" submenu
*
*/
#if E_STEPPERS > 1 || ENABLED(FILAMENT_LOAD_UNLOAD_GCODES)
void menu_change_filament() {
START_MENU();
MENU_BACK(MSG_MAIN);
// Change filament
#if E_STEPPERS == 1
PGM_P msg0 = PSTR(MSG_FILAMENTCHANGE);
if (thermalManager.targetTooColdToExtrude(active_extruder))
MENU_ITEM_P(submenu, msg0, menu_temp_e0_filament_change);
else
MENU_ITEM_P(gcode, msg0, PSTR("M600 B0"));
#else
PGM_P msg0 = PSTR(MSG_FILAMENTCHANGE " " MSG_E1);
PGM_P msg1 = PSTR(MSG_FILAMENTCHANGE " " MSG_E2);
if (thermalManager.targetTooColdToExtrude(0))
MENU_ITEM_P(submenu, msg0, menu_temp_e0_filament_change);
else
MENU_ITEM_P(gcode, msg0, PSTR("M600 B0 T0"));
if (thermalManager.targetTooColdToExtrude(1))
MENU_ITEM_P(submenu, msg1, menu_temp_e1_filament_change);
else
MENU_ITEM_P(gcode, msg1, PSTR("M600 B0 T1"));
#if E_STEPPERS > 2
PGM_P msg2 = PSTR(MSG_FILAMENTCHANGE " " MSG_E3);
if (thermalManager.targetTooColdToExtrude(2))
MENU_ITEM_P(submenu, msg2, menu_temp_e2_filament_change);
else
MENU_ITEM_P(gcode, msg2, PSTR("M600 B0 T2"));
#if E_STEPPERS > 3
PGM_P msg3 = PSTR(MSG_FILAMENTCHANGE " " MSG_E4);
if (thermalManager.targetTooColdToExtrude(3))
MENU_ITEM_P(submenu, msg3, menu_temp_e3_filament_change);
else
MENU_ITEM_P(gcode, msg3, PSTR("M600 B0 T3"));
#if E_STEPPERS > 4
PGM_P msg4 = PSTR(MSG_FILAMENTCHANGE " " MSG_E5);
if (thermalManager.targetTooColdToExtrude(4))
MENU_ITEM_P(submenu, msg4, menu_temp_e4_filament_change);
else
MENU_ITEM_P(gcode, msg4, PSTR("M600 B0 T4"));
#if E_STEPPERS > 5
PGM_P msg5 = PSTR(MSG_FILAMENTCHANGE " " MSG_E6);
if (thermalManager.targetTooColdToExtrude(5))
MENU_ITEM_P(submenu, msg5, menu_temp_e5_filament_change);
else
MENU_ITEM_P(gcode, msg5, PSTR("M600 B0 T5"));
#endif // E_STEPPERS > 5
#endif // E_STEPPERS > 4
#endif // E_STEPPERS > 3
#endif // E_STEPPERS > 2
#endif // E_STEPPERS == 1
#if ENABLED(FILAMENT_LOAD_UNLOAD_GCODES)
if (!printer_busy()) {
// Load filament
#if E_STEPPERS == 1
PGM_P msg0 = PSTR(MSG_FILAMENTLOAD);
if (thermalManager.targetTooColdToExtrude(active_extruder))
MENU_ITEM_P(submenu, msg0, menu_temp_e0_filament_load);
else
MENU_ITEM_P(gcode, msg0, PSTR("M701"));
#else
PGM_P msg0 = PSTR(MSG_FILAMENTLOAD " " MSG_E1);
PGM_P msg1 = PSTR(MSG_FILAMENTLOAD " " MSG_E2);
if (thermalManager.targetTooColdToExtrude(0))
MENU_ITEM_P(submenu, msg0, menu_temp_e0_filament_load);
else
MENU_ITEM_P(gcode, msg0, PSTR("M701 T0"));
if (thermalManager.targetTooColdToExtrude(1))
MENU_ITEM_P(submenu, msg1, menu_temp_e1_filament_load);
else
MENU_ITEM_P(gcode, msg1, PSTR("M701 T1"));
#if E_STEPPERS > 2
PGM_P msg2 = PSTR(MSG_FILAMENTLOAD " " MSG_E3);
if (thermalManager.targetTooColdToExtrude(2))
MENU_ITEM_P(submenu, msg2, menu_temp_e2_filament_load);
else
MENU_ITEM_P(gcode, msg2, PSTR("M701 T2"));
#if E_STEPPERS > 3
PGM_P msg3 = PSTR(MSG_FILAMENTLOAD " " MSG_E4);
if (thermalManager.targetTooColdToExtrude(3))
MENU_ITEM_P(submenu, msg3, menu_temp_e3_filament_load);
else
MENU_ITEM_P(gcode, msg3, PSTR("M701 T3"));
#if E_STEPPERS > 4
PGM_P msg4 = PSTR(MSG_FILAMENTLOAD " " MSG_E5);
if (thermalManager.targetTooColdToExtrude(4))
MENU_ITEM_P(submenu, msg4, menu_temp_e4_filament_load);
else
MENU_ITEM_P(gcode, msg4, PSTR("M701 T4"));
#if E_STEPPERS > 5
PGM_P msg5 = PSTR(MSG_FILAMENTLOAD " " MSG_E6);
if (thermalManager.targetTooColdToExtrude(5))
MENU_ITEM_P(submenu, msg5, menu_temp_e5_filament_load);
else
MENU_ITEM_P(gcode, msg5, PSTR("M701 T5"));
#endif // E_STEPPERS > 5
#endif // E_STEPPERS > 4
#endif // E_STEPPERS > 3
#endif // E_STEPPERS > 2
#endif // E_STEPPERS == 1
// Unload filament
#if E_STEPPERS == 1
if (thermalManager.targetHotEnoughToExtrude(active_extruder))
MENU_ITEM(gcode, MSG_FILAMENTUNLOAD, PSTR("M702"));
else
MENU_ITEM(submenu, MSG_FILAMENTUNLOAD, menu_temp_e0_filament_unload);
#else
#if ENABLED(FILAMENT_UNLOAD_ALL_EXTRUDERS)
if (thermalManager.targetHotEnoughToExtrude(0)
#if E_STEPPERS > 1
&& thermalManager.targetHotEnoughToExtrude(1)
#if E_STEPPERS > 2
&& thermalManager.targetHotEnoughToExtrude(2)
#if E_STEPPERS > 3
&& thermalManager.targetHotEnoughToExtrude(3)
#if E_STEPPERS > 4
&& thermalManager.targetHotEnoughToExtrude(4)
#if E_STEPPERS > 5
&& thermalManager.targetHotEnoughToExtrude(5)
#endif // E_STEPPERS > 5
#endif // E_STEPPERS > 4
#endif // E_STEPPERS > 3
#endif // E_STEPPERS > 2
#endif // E_STEPPERS > 1
)
MENU_ITEM(gcode, MSG_FILAMENTUNLOAD_ALL, PSTR("M702"));
else
MENU_ITEM(submenu, MSG_FILAMENTUNLOAD_ALL, menu_unload_filament_all_temp);
#endif
if (thermalManager.targetHotEnoughToExtrude(0))
MENU_ITEM(gcode, MSG_FILAMENTUNLOAD " " MSG_E1, PSTR("M702 T0"));
else
MENU_ITEM(submenu, MSG_FILAMENTUNLOAD " " MSG_E1, menu_temp_e0_filament_unload);
if (thermalManager.targetHotEnoughToExtrude(1))
MENU_ITEM(gcode, MSG_FILAMENTUNLOAD " " MSG_E2, PSTR("M702 T1"));
else
MENU_ITEM(submenu, MSG_FILAMENTUNLOAD " " MSG_E2, menu_temp_e1_filament_unload);
#if E_STEPPERS > 2
if (thermalManager.targetHotEnoughToExtrude(2))
MENU_ITEM(gcode, MSG_FILAMENTUNLOAD " " MSG_E3, PSTR("M702 T2"));
else
MENU_ITEM(submenu, MSG_FILAMENTUNLOAD " " MSG_E3, menu_temp_e2_filament_unload);
#if E_STEPPERS > 3
if (thermalManager.targetHotEnoughToExtrude(3))
MENU_ITEM(gcode, MSG_FILAMENTUNLOAD " " MSG_E4, PSTR("M702 T3"));
else
MENU_ITEM(submenu, MSG_FILAMENTUNLOAD " " MSG_E4, menu_temp_e3_filament_unload);
#if E_STEPPERS > 4
if (thermalManager.targetHotEnoughToExtrude(4))
MENU_ITEM(gcode, MSG_FILAMENTUNLOAD " " MSG_E5, PSTR("M702 T4"));
else
MENU_ITEM(submenu, MSG_FILAMENTUNLOAD " " MSG_E5, menu_temp_e4_filament_unload);
#if E_STEPPERS > 5
if (thermalManager.targetHotEnoughToExtrude(5))
MENU_ITEM(gcode, MSG_FILAMENTUNLOAD " " MSG_E6, PSTR("M702 T5"));
else
MENU_ITEM(submenu, MSG_FILAMENTUNLOAD " " MSG_E6, menu_temp_e5_filament_unload);
#endif // E_STEPPERS > 5
#endif // E_STEPPERS > 4
#endif // E_STEPPERS > 3
#endif // E_STEPPERS > 2
#endif // E_STEPPERS == 1
}
#endif
END_MENU();
}
#endif
static AdvancedPauseMode advanced_pause_mode = ADVANCED_PAUSE_MODE_PAUSE_PRINT;
static uint8_t hotend_status_extruder = 0;
static PGM_P advanced_pause_header() {
switch (advanced_pause_mode) {
case ADVANCED_PAUSE_MODE_LOAD_FILAMENT:
return PSTR(MSG_FILAMENT_CHANGE_HEADER_LOAD);
case ADVANCED_PAUSE_MODE_UNLOAD_FILAMENT:
return PSTR(MSG_FILAMENT_CHANGE_HEADER_UNLOAD);
default: break;
}
return PSTR(MSG_FILAMENT_CHANGE_HEADER_PAUSE);
}
// Portions from STATIC_ITEM...
#define HOTEND_STATUS_ITEM() do { \
if (_menuLineNr == _thisItemNr) { \
if (ui.should_draw()) { \
draw_menu_item_static(_lcdLineNr, PSTR(MSG_FILAMENT_CHANGE_NOZZLE), false, true); \
ui.draw_hotend_status(_lcdLineNr, hotend_status_extruder); \
} \
if (_skipStatic && encoderLine <= _thisItemNr) { \
ui.encoderPosition += ENCODER_STEPS_PER_MENU_ITEM; \
++encoderLine; \
} \
ui.refresh(LCDVIEW_CALL_REDRAW_NEXT); \
} \
++_thisItemNr; \
}while(0)
void lcd_advanced_pause_resume_print() {
advanced_pause_menu_response = ADVANCED_PAUSE_RESPONSE_RESUME_PRINT;
}
void lcd_advanced_pause_extrude_more() {
advanced_pause_menu_response = ADVANCED_PAUSE_RESPONSE_EXTRUDE_MORE;
}
void menu_advanced_pause_option() {
START_MENU();
#if LCD_HEIGHT > 2
STATIC_ITEM(MSG_FILAMENT_CHANGE_OPTION_HEADER, true, false);
#endif
MENU_ITEM(function, MSG_FILAMENT_CHANGE_OPTION_PURGE, lcd_advanced_pause_extrude_more);
#if HAS_FILAMENT_SENSOR
if (runout.filament_ran_out)
MENU_ITEM_EDIT_CALLBACK(bool, MSG_RUNOUT_SENSOR, &runout.enabled, runout.reset);
else
#endif
MENU_ITEM(function, MSG_FILAMENT_CHANGE_OPTION_RESUME, lcd_advanced_pause_resume_print);
END_MENU();
}
//
// ADVANCED_PAUSE_FEATURE message screens
//
void _lcd_advanced_pause_message(PGM_P const msg1, PGM_P const msg2=NULL, PGM_P const msg3=NULL) {
START_SCREEN();
STATIC_ITEM_P(advanced_pause_header(), true, true);
STATIC_ITEM_P(msg1);
if (msg2) STATIC_ITEM_P(msg2);
if (msg3) STATIC_ITEM_P(msg3);
if ((!!msg2) + (!!msg3) + 2 < LCD_HEIGHT - 1) STATIC_ITEM(" ");
HOTEND_STATUS_ITEM();
END_SCREEN();
}
void lcd_advanced_pause_init_message() {
_lcd_advanced_pause_message(PSTR(MSG_FILAMENT_CHANGE_INIT_1)
#ifdef MSG_FILAMENT_CHANGE_INIT_2
, PSTR(MSG_FILAMENT_CHANGE_INIT_2)
#ifdef MSG_FILAMENT_CHANGE_INIT_3
, PSTR(MSG_FILAMENT_CHANGE_INIT_3)
#endif
#endif
);
}
void lcd_advanced_pause_unload_message() {
_lcd_advanced_pause_message(PSTR(MSG_FILAMENT_CHANGE_UNLOAD_1)
#ifdef MSG_FILAMENT_CHANGE_UNLOAD_2
, PSTR(MSG_FILAMENT_CHANGE_UNLOAD_2)
#ifdef MSG_FILAMENT_CHANGE_UNLOAD_3
, PSTR(MSG_FILAMENT_CHANGE_UNLOAD_3)
#endif
#endif
);
}
void lcd_advanced_pause_heating_message() {
_lcd_advanced_pause_message(PSTR(MSG_FILAMENT_CHANGE_HEATING_1)
#ifdef MSG_FILAMENT_CHANGE_HEATING_2
, PSTR(MSG_FILAMENT_CHANGE_HEATING_2)
#ifdef MSG_FILAMENT_CHANGE_HEATING_3
, PSTR(MSG_FILAMENT_CHANGE_HEATING_3)
#endif
#endif
);
}
void lcd_advanced_pause_heat_message() {
_lcd_advanced_pause_message(PSTR(MSG_FILAMENT_CHANGE_HEAT_1)
#ifdef MSG_FILAMENT_CHANGE_HEAT_2
, PSTR(MSG_FILAMENT_CHANGE_HEAT_2)
#ifdef MSG_FILAMENT_CHANGE_HEAT_3
, PSTR(MSG_FILAMENT_CHANGE_HEAT_3)
#endif
#endif
);
}
void lcd_advanced_pause_insert_message() {
_lcd_advanced_pause_message(PSTR(MSG_FILAMENT_CHANGE_INSERT_1)
#ifdef MSG_FILAMENT_CHANGE_INSERT_2
, PSTR(MSG_FILAMENT_CHANGE_INSERT_2)
#ifdef MSG_FILAMENT_CHANGE_INSERT_3
, PSTR(MSG_FILAMENT_CHANGE_INSERT_3)
#endif
#endif
);
}
void lcd_advanced_pause_load_message() {
_lcd_advanced_pause_message(PSTR(MSG_FILAMENT_CHANGE_LOAD_1)
#ifdef MSG_FILAMENT_CHANGE_LOAD_2
, PSTR(MSG_FILAMENT_CHANGE_LOAD_2)
#ifdef MSG_FILAMENT_CHANGE_LOAD_3
, PSTR(MSG_FILAMENT_CHANGE_LOAD_3)
#endif
#endif
);
}
void lcd_advanced_pause_waiting_message() {
_lcd_advanced_pause_message(PSTR(MSG_ADVANCED_PAUSE_WAITING_1)
#ifdef MSG_ADVANCED_PAUSE_WAITING_2
, PSTR(MSG_ADVANCED_PAUSE_WAITING_2)
#ifdef MSG_ADVANCED_PAUSE_WAITING_3
, PSTR(MSG_ADVANCED_PAUSE_WAITING_3)
#endif
#endif
);
}
void lcd_advanced_pause_resume_message() {
_lcd_advanced_pause_message(PSTR(MSG_FILAMENT_CHANGE_RESUME_1)
#ifdef MSG_FILAMENT_CHANGE_RESUME_2
, PSTR(MSG_FILAMENT_CHANGE_RESUME_2)
#ifdef MSG_FILAMENT_CHANGE_RESUME_3
, PSTR(MSG_FILAMENT_CHANGE_RESUME_3)
#endif
#endif
);
}
void lcd_advanced_pause_purge_message() {
_lcd_advanced_pause_message(
#if ENABLED(ADVANCED_PAUSE_CONTINUOUS_PURGE)
PSTR(MSG_FILAMENT_CHANGE_CONT_PURGE_1)
#ifdef MSG_FILAMENT_CHANGE_CONT_PURGE_2
, PSTR(MSG_FILAMENT_CHANGE_CONT_PURGE_2)
#ifdef MSG_FILAMENT_CHANGE_CONT_PURGE_3
, PSTR(MSG_FILAMENT_CHANGE_CONT_PURGE_3)
#endif
#endif
#else
PSTR(MSG_FILAMENT_CHANGE_PURGE_1)
#ifdef MSG_FILAMENT_CHANGE_PURGE_2
, PSTR(MSG_FILAMENT_CHANGE_PURGE_2)
#ifdef MSG_FILAMENT_CHANGE_PURGE_3
, PSTR(MSG_FILAMENT_CHANGE_PURGE_3)
#endif
#endif
#endif
);
}
FORCE_INLINE screenFunc_t ap_message_screen(const AdvancedPauseMessage message) {
switch (message) {
case ADVANCED_PAUSE_MESSAGE_INIT: return lcd_advanced_pause_init_message;
case ADVANCED_PAUSE_MESSAGE_UNLOAD: return lcd_advanced_pause_unload_message;
case ADVANCED_PAUSE_MESSAGE_WAITING: return lcd_advanced_pause_waiting_message;
case ADVANCED_PAUSE_MESSAGE_INSERT: return lcd_advanced_pause_insert_message;
case ADVANCED_PAUSE_MESSAGE_LOAD: return lcd_advanced_pause_load_message;
case ADVANCED_PAUSE_MESSAGE_PURGE: return lcd_advanced_pause_purge_message;
case ADVANCED_PAUSE_MESSAGE_RESUME: return lcd_advanced_pause_resume_message;
case ADVANCED_PAUSE_MESSAGE_HEAT: return lcd_advanced_pause_heat_message;
case ADVANCED_PAUSE_MESSAGE_HEATING: return lcd_advanced_pause_heating_message;
case ADVANCED_PAUSE_MESSAGE_OPTION: advanced_pause_menu_response = ADVANCED_PAUSE_RESPONSE_WAIT_FOR;
return menu_advanced_pause_option;
case ADVANCED_PAUSE_MESSAGE_STATUS:
default: break;
}
return NULL;
}
void lcd_advanced_pause_show_message(
const AdvancedPauseMessage message,
const AdvancedPauseMode mode/*=ADVANCED_PAUSE_MODE_SAME*/,
const uint8_t extruder/*=active_extruder*/
) {
if (mode != ADVANCED_PAUSE_MODE_SAME) advanced_pause_mode = mode;
hotend_status_extruder = extruder;
const screenFunc_t next_screen = ap_message_screen(message);
if (next_screen) {
ui.defer_status_screen(true);
ui.goto_screen(next_screen);
}
else
ui.return_to_status();
}
#endif // HAS_LCD_MENU && ADVANCED_PAUSE_FEATURE