Marlin 2.0 for Flying Bear 4S/5
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

66 lines
2.1 KiB

/**
* Marlin 3D Printer Firmware
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* Custom Status Screen bitmap
*
* Place this file in the root with your configuration files
* and enable CUSTOM_STATUS_SCREEN_IMAGE in Configuration.h.
*
* Use the Marlin Bitmap Converter to make your own:
* http://marlinfw.org/tools/u8glib/converter.html
*/
//
// Status Screen Logo bitmap
//
#define STATUS_LOGO_Y 5
#define STATUS_LOGO_WIDTH 39
const unsigned char status_logo_bmp[] PROGMEM = {
B00000000,B00000000,B00000110,B00000000,B00000000,
B11111110,B00000000,B00000010,B00000000,B00000000,
B01000010,B00000000,B00000010,B00000000,B00000000,
B01001000,B00000000,B00000010,B00000000,B00000000,
B01001000,B11011100,B00111110,B00111100,B11101110,
B01111000,B01100010,B01000010,B01000010,B00110010,
B01001000,B01000010,B01000010,B01000010,B00100000,
B01001000,B01000010,B01000010,B01111110,B00100000,
B01000000,B01000010,B01000010,B01000000,B00100000,
B01000010,B01000010,B01000110,B01000010,B00100000,
B11111110,B11100111,B00111011,B00111100,B11111000
};
//
// Use default bitmaps
//
#define STATUS_HOTEND_ANIM
#define STATUS_BED_ANIM
#define STATUS_HEATERS_XSPACE 20
#if HOTENDS < 2
#define STATUS_HEATERS_X 48
#define STATUS_BED_X 72
#else
#define STATUS_HEATERS_X 40
#define STATUS_BED_X 80
#endif