Marlin 2.0 for Flying Bear 4S/5
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

179 lines
9.0 KiB

/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* Dutch
*
* LCD Menu Messages
* See also https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language
*
*/
#ifndef LANGUAGE_NL_H
#define LANGUAGE_NL_H
#define MAPPER_NON
// Define SIMULATE_ROMFONT to see what is seen on the character based display defined in Configuration.h
//#define SIMULATE_ROMFONT
#define DISPLAY_CHARSET_ISO10646_1
#define WELCOME_MSG MACHINE_NAME " gereed."
#define MSG_SD_INSERTED "Kaart ingestoken"
#define MSG_SD_REMOVED "Kaart verwijderd"
#define MSG_MAIN "Hoofdmenu"
#define MSG_AUTOSTART "Autostart"
#define MSG_DISABLE_STEPPERS "Motoren uit"
#define MSG_AUTO_HOME "Auto home"
#define MSG_LEVEL_BED_HOMING "Homing XYZ"
#define MSG_LEVEL_BED_WAITING "Click to Begin"
#define MSG_LEVEL_BED_DONE "Leveling Done!"
#define MSG_LEVEL_BED_CANCEL "Cancel"
#define MSG_SET_HOME_OFFSETS "Zet home offsets"
#define MSG_HOME_OFFSETS_APPLIED "Offsets applied"
#define MSG_SET_ORIGIN "Nulpunt instellen"
#define MSG_PREHEAT_PLA "PLA voorverwarmen"
#define MSG_PREHEAT_PLA_N "PLA voorverw. "
#define MSG_PREHEAT_PLA_ALL "PLA voorverw. aan"
#define MSG_PREHEAT_PLA_BEDONLY "PLA voorverw. Bed"
#define MSG_PREHEAT_PLA_SETTINGS "PLA verw. conf"
#define MSG_PREHEAT_ABS "ABS voorverwarmen"
#define MSG_PREHEAT_ABS_N "ABS voorverw. "
#define MSG_PREHEAT_ABS_ALL "ABS voorverw. aan"
#define MSG_PREHEAT_ABS_BEDONLY "ABS voorverw. Bed"
#define MSG_PREHEAT_ABS_SETTINGS "ABS verw. conf"
#define MSG_COOLDOWN "Afkoelen"
#define MSG_SWITCH_PS_ON "Stroom aan"
#define MSG_SWITCH_PS_OFF "Stroom uit"
#define MSG_EXTRUDE "Extrude"
#define MSG_RETRACT "Retract"
#define MSG_MOVE_AXIS "As verplaatsen"
#define MSG_MOVE_X "Verplaats X"
#define MSG_MOVE_Y "Verplaats Y"
#define MSG_MOVE_Z "Verplaats Z"
#define MSG_MOVE_E "Extruder"
#define MSG_MOVE_01MM "Verplaats 0.1mm"
#define MSG_MOVE_1MM "Verplaats 1mm"
#define MSG_MOVE_10MM "Verplaats 10mm"
#define MSG_SPEED "Snelheid"
#define MSG_NOZZLE "Nozzle"
#define MSG_BED "Bed"
#define MSG_FAN_SPEED "Fan snelheid"
#define MSG_FLOW "Flow"
#define MSG_CONTROL "Control"
#define MSG_MIN LCD_STR_THERMOMETER " Min"
#define MSG_MAX LCD_STR_THERMOMETER " Max"
#define MSG_FACTOR LCD_STR_THERMOMETER " Fact"
#define MSG_AUTOTEMP "Autotemp"
#define MSG_ON "Aan "
#define MSG_OFF "Uit"
#define MSG_PID_P "PID-P"
#define MSG_PID_I "PID-I"
#define MSG_PID_D "PID-D"
#define MSG_PID_C "PID-C"
#define MSG_ACC "Versn"
#define MSG_VXY_JERK "Vxy-jerk"
#define MSG_VZ_JERK "Vz-jerk"
#define MSG_VE_JERK "Ve-jerk"
#define MSG_VMAX "Vmax "
#define MSG_X "x"
#define MSG_Y "y"
#define MSG_Z "z"
#define MSG_E "e"
#define MSG_VMIN "Vmin"
#define MSG_VTRAV_MIN "VTrav min"
#define MSG_AMAX "Amax "
#define MSG_A_RETRACT "A-retract"
#define MSG_XSTEPS "Xsteps/mm"
#define MSG_YSTEPS "Ysteps/mm"
#define MSG_ZSTEPS "Zsteps/mm"
#define MSG_ESTEPS "Esteps/mm"
#define MSG_TEMPERATURE "Temperatuur"
#define MSG_MOTION "Beweging"
#define MSG_VOLUMETRIC "Filament"
#define MSG_VOLUMETRIC_ENABLED "E in mm3"
#define MSG_FILAMENT_DIAM "Fil. Dia."
#define MSG_CONTRAST "LCD contrast"
#define MSG_STORE_EPROM "Geheugen opslaan"
#define MSG_LOAD_EPROM "Geheugen laden"
#define MSG_RESTORE_FAILSAFE "Noodstop reset"
#define MSG_REFRESH "Ververs"
#define MSG_WATCH "Info scherm"
#define MSG_PREPARE "Voorbereiden"
#define MSG_TUNE "Afstellen"
#define MSG_PAUSE_PRINT "Print pauzeren"
#define MSG_RESUME_PRINT "Print hervatten"
#define MSG_STOP_PRINT "Print stoppen"
#define MSG_CARD_MENU "Print van SD"
#define MSG_NO_CARD "Geen SD kaart"
#define MSG_DWELL "Slapen..."
#define MSG_USERWAIT "Wachten..."
#define MSG_RESUMING "Print hervatten"
#define MSG_PRINT_ABORTED "Print afgebroken"
#define MSG_NO_MOVE "Geen beweging."
#define MSG_KILLED "Afgebroken. "
#define MSG_STOPPED "Gestopt. "
#define MSG_CONTROL_RETRACT "Retract mm"
#define MSG_CONTROL_RETRACT_SWAP "Ruil Retract mm"
#define MSG_CONTROL_RETRACTF "Retract F"
#define MSG_CONTROL_RETRACT_ZLIFT "Hop mm"
#define MSG_CONTROL_RETRACT_RECOVER "UnRet +mm"
#define MSG_CONTROL_RETRACT_RECOVER_SWAP "Ruil UnRet +mm"
#define MSG_CONTROL_RETRACT_RECOVERF "UnRet F"
#define MSG_AUTORETRACT "AutoRetr."
#define MSG_FILAMENTCHANGE "Verv. Filament"
#define MSG_INIT_SDCARD "Init. SD kaart"
#define MSG_CNG_SDCARD "Verv. SD Kaart"
#define MSG_ZPROBE_OUT "Z probe uit. bed"
#define MSG_YX_UNHOMED "Home X/Y voor Z"
#define MSG_ZPROBE_ZOFFSET "Z Offset"
#define MSG_BABYSTEP_X "Babystap X"
#define MSG_BABYSTEP_Y "Babystap Y"
#define MSG_BABYSTEP_Z "Babystap Z"
#define MSG_ENDSTOP_ABORT "Endstop afbr."
#define MSG_END_HOUR "uur"
#define MSG_END_MINUTE "minuten"
#define MSG_BED_Z "Bed Z"
#define MSG_A_TRAVEL "A-travel"
#define MSG_HEATING_FAILED_LCD "voorverw. fout"
#define MSG_ERR_REDUNDANT_TEMP "Redun. temp fout"
#define MSG_THERMAL_RUNAWAY "Therm. wegloop"
#define MSG_ERR_MAXTEMP "Err: Max. temp"
#define MSG_ERR_MINTEMP "Err: Min. temp"
#define MSG_ERR_MAXTEMP_BED "Err: Max.tmp bed"
#define MSG_ERR_MINTEMP_BED "Err: Min.tmp bed"
#define MSG_HEATING "Voorwarmen..."
#define MSG_HEATING_COMPLETE "Voorverw. kompl."
#define MSG_BED_HEATING "Bed voorverw."
#define MSG_BED_DONE "Bed is voorverw."
#define MSG_LEVEL_BED_HOMING "Homing XYZ"
#define MSG_LEVEL_BED_WAITING "Klik voor begin"
#define MSG_LEVEL_BED_DONE "Bed level kompl."
#define MSG_LEVEL_BED_CANCEL "Bed level afbr."
#define MSG_HOME_OFFSETS_APPLIED "H offset toegep."
#define MSG_DELTA_CALIBRATE "Delta Calibratie"
#define MSG_DELTA_CALIBRATE_X "Kalibreer X"
#define MSG_DELTA_CALIBRATE_Y "Kalibreer Y"
#define MSG_DELTA_CALIBRATE_Z "Kalibreer Z"
#define MSG_DELTA_CALIBRATE_CENTER "Kalibreer Midden"
#endif // LANGUAGE_NL_H