Marlin 2.0 for Flying Bear 4S/5
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

151 lines
7.6 KiB

/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once
#include "tft.h"
#include "../../inc/MarlinConfig.h"
#define ST7789V_MADCTL_MY 0x80 // Row Address Order
#define ST7789V_MADCTL_MX 0x40 // Column Address Order
#define ST7789V_MADCTL_MV 0x20 // Row/Column Exchange
#define ST7789V_MADCTL_ML 0x10 // Vertical Refresh Order
#define ST7789V_MADCTL_BGR 0x08 // RGB-BGR ORDER
#define ST7789V_MADCTL_RGB 0x00
#define ST7789V_MADCTL_MH 0x04 // Horizontal Refresh Order
#define ST7789V_ORIENTATION_UP ST7789V_MADCTL_MX | ST7789V_MADCTL_MY // 240x320 ; Cable on the upper side
#define ST7789V_ORIENTATION_RIGHT ST7789V_MADCTL_MX | ST7789V_MADCTL_MV // 320x240 ; Cable on the right side
#define ST7789V_ORIENTATION_LEFT ST7789V_MADCTL_MY | ST7789V_MADCTL_MV // 320x240 ; Cable on the left side
#define ST7789V_ORIENTATION_DOWN 0 // 240x320 ; Cable on the lower side
//#define ST7789V_COLOR_BGR
#ifndef ST7789V_ORIENTATION
#define ST7789V_ORIENTATION ST7789V_ORIENTATION_LEFT
#endif
#define ST7789V_MADCTL_DATA (ST7789V_ORIENTATION | TERN(ST7789V_COLOR_BGR, ST7789V_MADCTL_BGR, ST7789V_MADCTL_RGB))
#define ST7789V_NOP 0x00 // No Operation
#define ST7789V_SWRESET 0x01 // Software reset
#define ST7789V_RDDID 0x04 // Read Display ID
#define ST7789V_RDDST 0x09 // Read Display Status
#define ST7789V_RDDPM 0x0A // Read Display Power Mode
#define ST7789V_RDDMADCTL 0x0B // Read Display MADCTL
#define ST7789V_RDDCOLMOD 0x0C // Read Display Pixel Format
#define ST7789V_RDDIM 0x0D // Read Display Image Mode
#define ST7789V_RDDSM 0x0E // Read Display Signal Mode
#define ST7789V_RDDSDR 0x0F // Read Display Self-Diagnostic Result
#define ST7789V_SLPIN 0x10 // Sleep In
#define ST7789V_SLPOUT 0x11 // Sleep Out
#define ST7789V_PTLON 0x12 // Partial Display Mode On
#define ST7789V_NORON 0x13 // Normal Display Mode On
#define ST7789V_INVOFF 0x20 // Display Inversion Off
#define ST7789V_INVON 0x21 // Display Inversion On
#define ST7789V_GAMSET 0x26 // Gamma Set
#define ST7789V_DISPOFF 0x28 // Display Off
#define ST7789V_DISPON 0x29 // Display On
#define ST7789V_CASET 0x2A // Column Address Set
#define ST7789V_RASET 0x2B // Row Address Set
#define ST7789V_RAMWR 0x2C // Memory Write
#define ST7789V_RAMRD 0x2E // Memory Read
#define ST7789V_PTLAR 0x30 // Partial Area
#define ST7789V_VSCRDEF 0x33 // Vertical Scrolling Definition
#define ST7789V_TEOFF 0x34 // Tearing Effect Line OFF
#define ST7789V_TEON 0x35 // Tearing Effect Line ON
#define ST7789V_MADCTL 0x36 // Memory Data Access Control
#define ST7789V_VSCSAD 0x37 // Vertical Scroll Start Address of RAM
#define ST7789V_IDMOFF 0x38 // Idle Mode Off
#define ST7789V_IDMON 0x39 // Idle Mode On
#define ST7789V_COLMOD 0x3A // Interface Pixel Format
#define ST7789V_WRMEMC 0x3C // Write Memory Continue
#define ST7789V_RDMEMC 0x3E // Read Memory Continue
#define ST7789V_STE 0x44 // Set Tear Scanline
#define ST7789V_GSCAN 0x45 // Get Scanline
#define ST7789V_WRDISBV 0x51 // Write Display Brightness
#define ST7789V_RDDISBV 0x52 // Read Display Brightness
#define ST7789V_WRCTRLD 0x53 // Write CTRL Display
#define ST7789V_RDCTRLD 0x54 // Read CTRL Value Display
#define ST7789V_WRCACE 0x55 // Write Content Adaptive Brightness Control and Color Enhancement
#define ST7789V_RDCABC 0x56 // Read Content Adaptive Brightness Control
#define ST7789V_WRCABCMB 0x5E // Write CABC Minimum Brightness
#define ST7789V_RDCABCMB 0x5F // Read CABC Minimum Brightness
#define ST7789V_RDABCSDR 0x68 // Read Automatic Brightness Control Self-Diagnostic Result
#define ST7789V_RDID1 0xDA // Read ID1 Value
#define ST7789V_RDID2 0xDB // Read ID2 Value
#define ST7789V_RDID3 0xDC // Read ID3 Value
#define ST7789V_RAMCTRL 0xB0 // RAM Control
#define ST7789V_RGBCTRL 0xB1 // RGB Interface Control
#define ST7789V_PORCTRL 0xB2 // Porch Setting
#define ST7789V_FRCTRL1 0xB3 // Frame Rate Control 1 (In partial mode/ idle colors)
#define ST7789V_GCTRL 0xB7 // Gate Control
#define ST7789V_DGMEN 0xBA // Digital Gamma Enable
#define ST7789V_VCOMS 0xBB // VCOM Setting
#define ST7789V_LCMCTRL 0xC0 // LCM Control
#define ST7789V_IDSET 0xC1 // ID Code Setting
#define ST7789V_VDVVRHEN 0xC2 // VDV and VRH Command Enable
#define ST7789V_VRHS 0xC3 // VRH Set
#define ST7789V_VDVS 0xC4 // VDV Set
#define ST7789V_VCMOFSET 0xC5 // VCOM Offset Set
#define ST7789V_FRCTRL2 0xC6 // Frame Rate Control in Normal Mode
#define ST7789V_CABCCTRL 0xC7 // CABC Control
#define ST7789V_REGSEL1 0xC8 // Register Value Selection 1
#define ST7789V_REGSEL2 0xCA // Register Value Selection 2
#define ST7789V_PWMFRSEL 0xCC // PWM Frequency Selection
#define ST7789V_PWCTRL1 0xD0 // Power Control 1
#define ST7789V_VAPVANEN 0xD2 // Enable VAP/VAN signal output
#define ST7789V_CMD2EN 0xDF // Command 2 Enable
#define ST7789V_PVGAMCTRL 0xE0 // Positive Voltage Gamma Control
#define ST7789V_NVGAMCTRL 0xE1 // Negative Voltage Gamma Control
#define ST7789V_DGMLUTR 0xE2 // Digital Gamma Look-up Table for Red
#define ST7789V_DGMLUTB 0xE3 // Digital Gamma Look-up Table for Blue
#define ST7789V_GATECTRL 0xE4 // Gate Control
#define ST7789V_SPI2EN 0xE7 // SPI2 Enable
#define ST7789V_PWCTRL2 0xE8 // Power Control 2
#define ST7789V_EQCTRL 0xE9 // Equalize time control
#define ST7789V_PROMCTRL 0xEC // Program Mode Control
#define ST7789V_PROMEN 0xFA // Program Mode Enable
#define ST7789V_NVMSET 0xFC // NVM Setting
#define ST7789V_PROMACT 0xFE // Program action
static const uint16_t st7789v_init[] = {
DATASIZE_8BIT,
ESC_REG(ST7789V_SWRESET), ESC_DELAY(100),
ESC_REG(ST7789V_SLPOUT), ESC_DELAY(20),
ESC_REG(ST7789V_PORCTRL), 0x000C, 0x000C, 0x0000, 0x0033, 0x0033,
ESC_REG(ST7789V_GCTRL), 0x0035,
ESC_REG(ST7789V_VCOMS), 0x001F,
ESC_REG(ST7789V_LCMCTRL), 0x002C,
ESC_REG(ST7789V_VDVVRHEN), 0x0001, 0x00C3,
ESC_REG(ST7789V_VDVS), 0x0020,
ESC_REG(ST7789V_FRCTRL2), 0x000F,
ESC_REG(ST7789V_PWCTRL1), 0x00A4, 0x00A1,
ESC_REG(ST7789V_MADCTL), ST7789V_MADCTL_DATA,
ESC_REG(ST7789V_COLMOD), 0x0055,
ESC_REG(ST7789V_NORON),
ESC_REG(ST7789V_DISPON),
ESC_END
};