Marlin 2.0 for Flying Bear 4S/5
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

250 lines
15 KiB

/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* Bulgarian
*
* LCD Menu Messages
* See also https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language
*
*/
#ifndef LANGUAGE_BG_H
#define LANGUAGE_BG_H
#define MAPPER_D0D1 // For Cyrillic
#define DISPLAY_CHARSET_ISO10646_5
#define WELCOME_MSG MACHINE_NAME _UxGT(" Готов.")
#define MSG_SD_INSERTED _UxGT("Картата е поставена")
#define MSG_SD_REMOVED _UxGT("Картата е извадена")
#define MSG_LCD_ENDSTOPS _UxGT("Endstops") // Max length 8 characters
#define MSG_MAIN _UxGT("Меню")
#define MSG_AUTOSTART _UxGT("Автостарт")
#define MSG_DISABLE_STEPPERS _UxGT("Изкл. двигатели")
#define MSG_AUTO_HOME _UxGT("Паркиране")
#define MSG_AUTO_HOME_X _UxGT("Home X")
#define MSG_AUTO_HOME_Y _UxGT("Home Y")
#define MSG_AUTO_HOME_Z _UxGT("Home Z")
#define MSG_LEVEL_BED_HOMING _UxGT("Homing XYZ")
#define MSG_LEVEL_BED_WAITING _UxGT("Click to Begin")
#define MSG_LEVEL_BED_NEXT_POINT _UxGT("Next Point")
#define MSG_LEVEL_BED_DONE _UxGT("Leveling Done!")
#define MSG_LEVEL_BED_CANCEL _UxGT("Cancel")
#define MSG_SET_HOME_OFFSETS _UxGT("Задай Начало")
#define MSG_HOME_OFFSETS_APPLIED _UxGT("Offsets applied")
#define MSG_SET_ORIGIN _UxGT("Изходна точка")
#define MSG_PREHEAT_1 _UxGT("Подгряване PLA")
#define MSG_PREHEAT_1_N _UxGT("Подгряване PLA")
#define MSG_PREHEAT_1_ALL _UxGT("Подгр. PLA Всички")
#define MSG_PREHEAT_1_BEDONLY _UxGT("Подгр. PLA Легло")
#define MSG_PREHEAT_1_SETTINGS _UxGT("Настройки PLA")
#define MSG_PREHEAT_2 _UxGT("Подгряване ABS")
#define MSG_PREHEAT_2_N _UxGT("Подгряване ABS")
#define MSG_PREHEAT_2_ALL _UxGT("Подгр. ABS Всички")
#define MSG_PREHEAT_2_BEDONLY _UxGT("Подгр. ABS Легло")
#define MSG_PREHEAT_2_SETTINGS _UxGT("Настройки ABS")
#define MSG_COOLDOWN _UxGT("Охлаждане")
#define MSG_SWITCH_PS_ON _UxGT("Вкл. захранване")
#define MSG_SWITCH_PS_OFF _UxGT("Изкл. захранване")
#define MSG_EXTRUDE _UxGT("Екструзия")
#define MSG_RETRACT _UxGT("Откат")
#define MSG_MOVE_AXIS _UxGT("Движение по ос")
#define MSG_LEVEL_BED _UxGT("Нивелиране")
#define MSG_MOVE_X _UxGT("Движение по X")
#define MSG_MOVE_Y _UxGT("Движение по Y")
#define MSG_MOVE_Z _UxGT("Движение по Z")
#define MSG_MOVE_E _UxGT("Екструдер")
#define MSG_MOVE_01MM _UxGT("Премести с 0.1mm")
#define MSG_MOVE_1MM _UxGT("Премести с 1mm")
#define MSG_MOVE_10MM _UxGT("Премести с 10mm")
#define MSG_SPEED _UxGT("Скорост")
#define MSG_BED_Z _UxGT("Bed Z")
#define MSG_NOZZLE LCD_STR_THERMOMETER _UxGT(" Дюза")
#define MSG_BED LCD_STR_THERMOMETER _UxGT(" Легло")
#define MSG_FAN_SPEED _UxGT("Вентилатор")
#define MSG_FLOW _UxGT("Поток")
#define MSG_CONTROL _UxGT("Управление")
#define MSG_MIN LCD_STR_THERMOMETER _UxGT(" Минимум")
#define MSG_MAX LCD_STR_THERMOMETER _UxGT(" Максимум")
#define MSG_FACTOR LCD_STR_THERMOMETER _UxGT(" Фактор")
#define MSG_AUTOTEMP _UxGT("Авто-темп.")
#define MSG_ON _UxGT("Вкл. ")
#define MSG_OFF _UxGT("Изкл. ")
#define MSG_PID_P _UxGT("PID-P")
#define MSG_PID_I _UxGT("PID-I")
#define MSG_PID_D _UxGT("PID-D")
#define MSG_PID_C _UxGT("PID-C")
#define MSG_SELECT _UxGT("Select")
#define MSG_ACC _UxGT("Acc")
#define MSG_VX_JERK _UxGT("Vx-jerk")
#define MSG_VY_JERK _UxGT("Vy-jerk")
#define MSG_VZ_JERK _UxGT("Vz-jerk")
#define MSG_VE_JERK _UxGT("Ve-jerk")
#define MSG_VMAX _UxGT("Vmax ")
#define MSG_VMIN _UxGT("Vmin")
#define MSG_VTRAV_MIN _UxGT("VTrav min")
#define MSG_AMAX _UxGT("Amax ")
#define MSG_A_RETRACT _UxGT("A-откат")
#define MSG_A_TRAVEL _UxGT("A-travel")
#define MSG_XSTEPS _UxGT("X стъпки/mm")
#define MSG_YSTEPS _UxGT("Y стъпки/mm")
#define MSG_ZSTEPS _UxGT("Z стъпки/mm")
#define MSG_ESTEPS _UxGT("E стъпки/mm")
#define MSG_E1STEPS _UxGT("E1 стъпки/mm")
#define MSG_E2STEPS _UxGT("E2 стъпки/mm")
#define MSG_E3STEPS _UxGT("E3 стъпки/mm")
#define MSG_E4STEPS _UxGT("E4 стъпки/mm")
#define MSG_TEMPERATURE _UxGT("Температура")
#define MSG_MOTION _UxGT("Движение")
#define MSG_VOLUMETRIC _UxGT("Нишка")
#define MSG_VOLUMETRIC_ENABLED _UxGT("E in mm3")
#define MSG_FILAMENT_DIAM _UxGT("Диам. нишка")
#define MSG_CONTRAST _UxGT("LCD контраст")
#define MSG_STORE_EPROM _UxGT("Запази в EPROM")
#define MSG_LOAD_EPROM _UxGT("Зареди от EPROM")
#define MSG_RESTORE_FAILSAFE _UxGT("Фабрични настройки")
#define MSG_REFRESH LCD_STR_REFRESH _UxGT("Обнови")
#define MSG_WATCH _UxGT("Преглед")
#define MSG_PREPARE _UxGT("Действия")
#define MSG_TUNE _UxGT("Настройка")
#define MSG_PAUSE_PRINT _UxGT("Пауза")
#define MSG_RESUME_PRINT _UxGT("Възобнови печата")
#define MSG_STOP_PRINT _UxGT("Спри печата")
#define MSG_CARD_MENU _UxGT("Меню карта")
#define MSG_NO_CARD _UxGT("Няма карта")
#define MSG_DWELL _UxGT("Почивка...")
#define MSG_USERWAIT _UxGT("Изчакване")
#define MSG_RESUMING _UxGT("Продълж. печата")
#define MSG_PRINT_ABORTED _UxGT("Печатът е прекъснат")
#define MSG_NO_MOVE _UxGT("Няма движение")
#define MSG_KILLED _UxGT("УБИТО.")
#define MSG_STOPPED _UxGT("СПРЯНО.")
#define MSG_CONTROL_RETRACT _UxGT("Откат mm")
#define MSG_CONTROL_RETRACT_SWAP _UxGT("Смяна Откат mm")
#define MSG_CONTROL_RETRACTF _UxGT("Откат V")
#define MSG_CONTROL_RETRACT_ZLIFT _UxGT("Скок mm")
#define MSG_CONTROL_RETRACT_RECOVER _UxGT("Възврат +mm")
#define MSG_CONTROL_RETRACT_RECOVER_SWAP _UxGT("Смяна Възврат +mm")
#define MSG_CONTROL_RETRACT_RECOVERF _UxGT("Възврат V")
#define MSG_AUTORETRACT _UxGT("Автоoткат")
#define MSG_FILAMENTCHANGE _UxGT("Смяна нишка")
#define MSG_INIT_SDCARD _UxGT("Иниц. SD-Карта")
#define MSG_CNG_SDCARD _UxGT("Смяна SD-Карта")
#define MSG_ZPROBE_OUT _UxGT("Z-сондата е извадена")
#define MSG_BLTOUCH_SELFTEST _UxGT("BLTouch Self-Test")
#define MSG_BLTOUCH_RESET _UxGT("Reset BLTouch")
#define MSG_HOME _UxGT("Home") // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST
#define MSG_FIRST _UxGT("first")
#define MSG_ZPROBE_ZOFFSET _UxGT("Z Отстояние")
#define MSG_BABYSTEP_X _UxGT("Министъпка X")
#define MSG_BABYSTEP_Y _UxGT("Министъпка Y")
#define MSG_BABYSTEP_Z _UxGT("Министъпка Z")
#define MSG_ENDSTOP_ABORT _UxGT("Стоп Кр.Изключватели")
#define MSG_HEATING_FAILED_LCD _UxGT("Heating failed")
#define MSG_ERR_REDUNDANT_TEMP _UxGT("Err: REDUNDANT TEMP")
#define MSG_THERMAL_RUNAWAY _UxGT("THERMAL RUNAWAY")
#define MSG_ERR_MAXTEMP _UxGT("Err: MAXTEMP")
#define MSG_ERR_MINTEMP _UxGT("Err: MINTEMP")
#define MSG_ERR_MAXTEMP_BED _UxGT("Err: MAXTEMP BED")
#define MSG_ERR_MINTEMP_BED _UxGT("Err: MINTEMP BED")
#define MSG_ERR_Z_HOMING _UxGT("G28 Z Forbidden")
#define MSG_HALTED _UxGT("PRINTER HALTED")
#define MSG_PLEASE_RESET _UxGT("Please reset")
#define MSG_SHORT_DAY _UxGT("d") // One character only
#define MSG_SHORT_HOUR _UxGT("h") // One character only
#define MSG_SHORT_MINUTE _UxGT("m") // One character only
#define MSG_HEATING _UxGT("Heating...")
#define MSG_HEATING_COMPLETE _UxGT("Heating done.")
#define MSG_BED_HEATING _UxGT("Bed Heating.")
#define MSG_BED_DONE _UxGT("Bed done.")
#define MSG_DELTA_CALIBRATE _UxGT("Делта Калибровка")
#define MSG_DELTA_CALIBRATE_X _UxGT("Калибровка X")
#define MSG_DELTA_CALIBRATE_Y _UxGT("Калибровка Y")
#define MSG_DELTA_CALIBRATE_Z _UxGT("Калибровка Z")
#define MSG_DELTA_CALIBRATE_CENTER _UxGT("Калибровка Център")
#define MSG_INFO_MENU _UxGT("About Printer")
#define MSG_INFO_PRINTER_MENU _UxGT("Printer Info")
#define MSG_INFO_STATS_MENU _UxGT("Printer Stats")
#define MSG_INFO_BOARD_MENU _UxGT("Board Info")
#define MSG_INFO_THERMISTOR_MENU _UxGT("Thermistors")
#define MSG_INFO_EXTRUDERS _UxGT("Extruders")
#define MSG_INFO_BAUDRATE _UxGT("Baud")
#define MSG_INFO_PROTOCOL _UxGT("Protocol")
#define MSG_LIGHTS_ON _UxGT("Case light on")
#define MSG_LIGHTS_OFF _UxGT("Case light off")
#if LCD_WIDTH >= 20
#define MSG_INFO_PRINT_COUNT _UxGT("Print Count")
#define MSG_INFO_COMPLETED_PRINTS _UxGT("Completed")
#define MSG_INFO_PRINT_TIME _UxGT("Total print time")
#define MSG_INFO_PRINT_LONGEST _UxGT("Longest job time")
#define MSG_INFO_PRINT_FILAMENT _UxGT("Extruded total")
#else
#define MSG_INFO_PRINT_COUNT _UxGT("Prints")
#define MSG_INFO_COMPLETED_PRINTS _UxGT("Completed")
#define MSG_INFO_PRINT_TIME _UxGT("Total")
#define MSG_INFO_PRINT_LONGEST _UxGT("Longest")
#define MSG_INFO_PRINT_FILAMENT _UxGT("Extruded")
#endif
#define MSG_INFO_MIN_TEMP _UxGT("Min Temp")
#define MSG_INFO_MAX_TEMP _UxGT("Max Temp")
#define MSG_INFO_PSU _UxGT("Power Supply")
#define MSG_DRIVE_STRENGTH _UxGT("Drive Strength")
#define MSG_DAC_PERCENT _UxGT("Driver %")
#define MSG_DAC_EEPROM_WRITE _UxGT("DAC EEPROM Write")
#define MSG_FILAMENT_CHANGE_HEADER _UxGT("CHANGE FILAMENT")
#define MSG_FILAMENT_CHANGE_OPTION_HEADER _UxGT("CHANGE OPTIONS:")
#define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE _UxGT("Extrude more")
#define MSG_FILAMENT_CHANGE_OPTION_RESUME _UxGT("Resume print")
#if LCD_HEIGHT >= 4
// Up to 3 lines allowed
#define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Wait for start")
#define MSG_FILAMENT_CHANGE_INIT_2 _UxGT("of the filament")
#define MSG_FILAMENT_CHANGE_INIT_3 _UxGT("change")
#define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Wait for")
#define MSG_FILAMENT_CHANGE_UNLOAD_2 _UxGT("filament unload")
#define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Insert filament")
#define MSG_FILAMENT_CHANGE_INSERT_2 _UxGT("and press button")
#define MSG_FILAMENT_CHANGE_INSERT_3 _UxGT("to continue...")
#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Wait for")
#define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("filament load")
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 _UxGT("Wait for")
#define MSG_FILAMENT_CHANGE_EXTRUDE_2 _UxGT("filament extrude")
#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Wait for print")
#define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("to resume")
#else // LCD_HEIGHT < 4
// Up to 2 lines allowed
#define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Please wait...")
#define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Ejecting...")
#define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Insert and Click")
#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Loading...")
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 _UxGT("Extruding...")
#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Resuming...")
#endif // LCD_HEIGHT < 4
#endif // LANGUAGE_BG_H