Marlin_FB4S/Marlin/src/lcd/e3v2/jyersui/dwin.cpp

/**
 * Marlin 3D Printer Firmware
 * Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 3 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <https://www.gnu.org/licenses/>.
 *
 */

/**
 * lcd/e3v2/jyersui/dwin.cpp
 */

#include "../../../inc/MarlinConfigPre.h"

#if ENABLED(DWIN_CREALITY_LCD_JYERSUI)

#include "dwin.h"

#include "../../marlinui.h"
#include "../../../MarlinCore.h"

#include "../../../module/temperature.h"
#include "../../../module/planner.h"
#include "../../../module/settings.h"
#include "../../../libs/buzzer.h"
#include "../../../inc/Conditionals_post.h"

#if ENABLED(ADVANCED_PAUSE_FEATURE)
  #include "../../../feature/pause.h"
#endif

#if ENABLED(FILAMENT_RUNOUT_SENSOR)
  #include "../../../feature/runout.h"
#endif

#if ENABLED(HOST_ACTION_COMMANDS)
  #include "../../../feature/host_actions.h"
#endif

#if ANY(BABYSTEPPING, HAS_BED_PROBE, HAS_WORKSPACE_OFFSET)
  #define HAS_ZOFFSET_ITEM 1
#endif

#ifndef strcasecmp_P
  #define strcasecmp_P(a, b) strcasecmp((a), (b))
#endif

#if HAS_LEVELING
  #include "../../../feature/bedlevel/bedlevel.h"
#endif

#if ENABLED(AUTO_BED_LEVELING_UBL)
  #include "../../../libs/least_squares_fit.h"
  #include "../../../libs/vector_3.h"
#endif

#if HAS_BED_PROBE
  #include "../../../module/probe.h"
#endif

#if ANY(HAS_HOTEND, HAS_HEATED_BED, HAS_FAN) && PREHEAT_COUNT
  #define HAS_PREHEAT 1
#endif

#if ENABLED(POWER_LOSS_RECOVERY)
  #include "../../../feature/powerloss.h"
#endif

#define MACHINE_SIZE STRINGIFY(X_BED_SIZE) "x" STRINGIFY(Y_BED_SIZE) "x" STRINGIFY(Z_MAX_POS)

#ifndef CORP_WEBSITE
   #define CORP_WEBSITE WEBSITE_URL
 #endif

#define DWIN_FONT_MENU font8x16
#define DWIN_FONT_STAT font10x20
#define DWIN_FONT_HEAD font10x20

#define MENU_CHAR_LIMIT  24
#define STATUS_Y 352

#define MAX_PRINT_SPEED   500
#define MIN_PRINT_SPEED   10

#if HAS_FAN
  #define MAX_FAN_SPEED     255
  #define MIN_FAN_SPEED     0
#endif

#define MAX_XY_OFFSET 100

#if HAS_ZOFFSET_ITEM
  #define MAX_Z_OFFSET 9.99
  #if HAS_BED_PROBE
    #define MIN_Z_OFFSET -9.99
  #else
    #define MIN_Z_OFFSET -1
  #endif
#endif

#if HAS_HOTEND
  #define MAX_FLOW_RATE   200
  #define MIN_FLOW_RATE   10

  #define MAX_E_TEMP    (HEATER_0_MAXTEMP - HOTEND_OVERSHOOT)
  #define MIN_E_TEMP    0
#endif

#if HAS_HEATED_BED
  #define MAX_BED_TEMP  BED_MAXTEMP
  #define MIN_BED_TEMP  0
#endif

constexpr uint16_t TROWS = 6, MROWS = TROWS - 1,
                   TITLE_HEIGHT = 30,
                   MLINE = 53,
                   LBLX = 60,
                   MENU_CHR_W = 8, MENU_CHR_H = 16, STAT_CHR_W = 10;

#define MBASE(L) (49 + MLINE * (L))

constexpr float default_max_feedrate[]        = DEFAULT_MAX_FEEDRATE;
constexpr float default_max_acceleration[]    = DEFAULT_MAX_ACCELERATION;
constexpr float default_steps[]               = DEFAULT_AXIS_STEPS_PER_UNIT;
#if HAS_CLASSIC_JERK
  constexpr float default_max_jerk[]            = { DEFAULT_XJERK, DEFAULT_YJERK, DEFAULT_ZJERK, DEFAULT_EJERK };
#endif

uint8_t active_menu = MainMenu;
uint8_t last_menu = MainMenu;
uint8_t selection = 0;
uint8_t last_selection = 0;
uint8_t scrollpos = 0;
uint8_t process = Main;
uint8_t last_process = Main;
PopupID popup;
PopupID last_popup;

void (*funcpointer)() = nullptr;
void *valuepointer = nullptr;
float tempvalue;
float valuemin;
float valuemax;
uint8_t valueunit;
uint8_t valuetype;

char cmd[MAX_CMD_SIZE+16], str_1[16], str_2[16], str_3[16];
char statusmsg[64];
char filename[LONG_FILENAME_LENGTH];
bool printing = false;
bool paused = false;
bool sdprint = false;

int16_t pausetemp, pausebed, pausefan;

bool livemove = false;
bool liveadjust = false;
uint8_t preheatmode = 0;
float zoffsetvalue = 0;
uint8_t gridpoint;
float corner_avg;
float corner_pos;

bool probe_deployed = false;

CrealityDWINClass CrealityDWIN;

#if HAS_MESH
  struct Mesh_Settings {
    bool viewer_asymmetric_range = false;
    bool viewer_print_value = false;
    bool goto_mesh_value = false;
    bool drawing_mesh = false;
    uint8_t mesh_x = 0;
    uint8_t mesh_y = 0;

    #if ENABLED(AUTO_BED_LEVELING_UBL)
      bed_mesh_t &mesh_z_values = ubl.z_values;
      uint8_t tilt_grid = 1;

      void manual_value_update(bool undefined=false) {
        sprintf_P(cmd, PSTR("M421 I%i J%i Z%s %s"), mesh_x, mesh_y, dtostrf(current_position.z, 1, 3, str_1), undefined ? "N" : "");
        gcode.process_subcommands_now_P(cmd);
        planner.synchronize();
      }

      bool create_plane_from_mesh() {
        struct linear_fit_data lsf_results;
        incremental_LSF_reset(&lsf_results);
        GRID_LOOP(x, y) {
          if (!isnan(mesh_z_values[x][y])) {
            xy_pos_t rpos;
            rpos.x = ubl.mesh_index_to_xpos(x);
            rpos.y = ubl.mesh_index_to_ypos(y);
            incremental_LSF(&lsf_results, rpos, mesh_z_values[x][y]);
          }
        }

        if (finish_incremental_LSF(&lsf_results)) {
          SERIAL_ECHOPGM("Could not complete LSF!");
          return true;
        }

        ubl.set_all_mesh_points_to_value(0);

        matrix_3x3 rotation = matrix_3x3::create_look_at(vector_3(lsf_results.A, lsf_results.B, 1));
        GRID_LOOP(i, j) {
          float mx = ubl.mesh_index_to_xpos(i),
                my = ubl.mesh_index_to_ypos(j),
                mz = mesh_z_values[i][j];

          if (DEBUGGING(LEVELING)) {
            DEBUG_ECHOPAIR_F("before rotation = [", mx, 7);
            DEBUG_CHAR(',');
            DEBUG_ECHO_F(my, 7);
            DEBUG_CHAR(',');
            DEBUG_ECHO_F(mz, 7);
            DEBUG_ECHOPGM("]   ---> ");
            DEBUG_DELAY(20);
          }

          rotation.apply_rotation_xyz(mx, my, mz);

          if (DEBUGGING(LEVELING)) {
            DEBUG_ECHOPAIR_F("after rotation = [", mx, 7);
            DEBUG_CHAR(',');
            DEBUG_ECHO_F(my, 7);
            DEBUG_CHAR(',');
            DEBUG_ECHO_F(mz, 7);
            DEBUG_ECHOLNPGM("]");
            DEBUG_DELAY(20);
          }

          mesh_z_values[i][j] = mz - lsf_results.D;
        }
        return false;
      }

    #else
      bed_mesh_t &mesh_z_values = z_values;

      void manual_value_update() {
        sprintf_P(cmd, PSTR("G29 I%i J%i Z%s"), mesh_x, mesh_y, dtostrf(current_position.z, 1, 3, str_1));
        gcode.process_subcommands_now_P(cmd);
        planner.synchronize();
      }

    #endif

    void manual_move(bool zmove=false) {
      if (zmove) {
        planner.synchronize();
        current_position.z = goto_mesh_value ? mesh_z_values[mesh_x][mesh_y] : Z_CLEARANCE_BETWEEN_PROBES;
        planner.buffer_line(current_position, homing_feedrate(Z_AXIS), active_extruder);
        planner.synchronize();
      }
      else {
        CrealityDWIN.Popup_Handler(MoveWait);
        sprintf_P(cmd, PSTR("G0 F300 Z%s"), dtostrf(Z_CLEARANCE_BETWEEN_PROBES, 1, 3, str_1));
        gcode.process_subcommands_now_P(cmd);
        sprintf_P(cmd, PSTR("G42 F4000 I%i J%i"), mesh_x, mesh_y);
        gcode.process_subcommands_now_P(cmd);
        planner.synchronize();
        current_position.z = goto_mesh_value ? mesh_z_values[mesh_x][mesh_y] : Z_CLEARANCE_BETWEEN_PROBES;
        planner.buffer_line(current_position, homing_feedrate(Z_AXIS), active_extruder);
        planner.synchronize();
        CrealityDWIN.Redraw_Menu();
      }
    }

    float get_max_value() {
      float max = __FLT_MIN__;
      GRID_LOOP(x, y) {
        if (!isnan(mesh_z_values[x][y]) && mesh_z_values[x][y] > max)
          max = mesh_z_values[x][y];
      }
      return max;
    }

    float get_min_value() {
      float min = __FLT_MAX__;
      GRID_LOOP(x, y) {
        if (!isnan(mesh_z_values[x][y]) && mesh_z_values[x][y] < min)
          min = mesh_z_values[x][y];
      }
      return min;
    }

    void Draw_Bed_Mesh(int16_t selected = -1, uint8_t gridline_width = 1, uint16_t padding_x = 8, uint16_t padding_y_top = 40 + 53 - 7) {
      drawing_mesh = true;
      const uint16_t total_width_px = DWIN_WIDTH - padding_x - padding_x;
      const uint16_t cell_width_px  = total_width_px / GRID_MAX_POINTS_X;
      const uint16_t cell_height_px = total_width_px / GRID_MAX_POINTS_Y;
      const float v_max = abs(get_max_value()), v_min = abs(get_min_value()), range = max(v_min, v_max);

      // Clear background from previous selection and select new square
      DWIN_Draw_Rectangle(1, Color_Bg_Black, max(0, padding_x - gridline_width), max(0, padding_y_top - gridline_width), padding_x + total_width_px, padding_y_top + total_width_px);
      if (selected >= 0) {
        const auto selected_y = selected / GRID_MAX_POINTS_X;
        const auto selected_x = selected - (GRID_MAX_POINTS_X * selected_y);
        const auto start_y_px = padding_y_top + selected_y * cell_height_px;
        const auto start_x_px = padding_x + selected_x * cell_width_px;
        DWIN_Draw_Rectangle(1, Color_White, max(0, start_x_px - gridline_width), max(0, start_y_px - gridline_width), start_x_px + cell_width_px, start_y_px + cell_height_px);
      }

      // Draw value square grid
      char buf[8];
      GRID_LOOP(x, y) {
        const auto start_x_px = padding_x + x * cell_width_px;
        const auto end_x_px   = start_x_px + cell_width_px - 1 - gridline_width;
        const auto start_y_px = padding_y_top + (GRID_MAX_POINTS_Y - y - 1) * cell_height_px;
        const auto end_y_px   = start_y_px + cell_height_px - 1 - gridline_width;
        DWIN_Draw_Rectangle(1,        // RGB565 colors: http://www.barth-dev.de/online/rgb565-color-picker/
          isnan(mesh_z_values[x][y]) ? Color_Grey : (                                                              // gray if undefined
            (mesh_z_values[x][y] < 0 ?
              (uint16_t)round(0b11111  * -mesh_z_values[x][y] / (!viewer_asymmetric_range ? range : v_min)) << 11 : // red if mesh point value is negative
              (uint16_t)round(0b111111 *  mesh_z_values[x][y] / (!viewer_asymmetric_range ? range : v_max)) << 5) | // green if mesh point value is positive
                min(0b11111, (((uint8_t)abs(mesh_z_values[x][y]) / 10) * 4))),                                     // + blue stepping for every mm
          start_x_px, start_y_px, end_x_px, end_y_px);
        while (LCD_SERIAL.availableForWrite() < 32) { // wait for serial to be available without blocking and resetting the MCU
          gcode.process_subcommands_now_P("G4 P10");
          planner.synchronize();
        }
        // Draw value text on
        if (viewer_print_value) {
          gcode.process_subcommands_now_P("G4 P10");  // still fails without additional delay...
          planner.synchronize();
          int8_t offset_x, offset_y = cell_height_px / 2 - 6;
          if (isnan(mesh_z_values[x][y])) {  // undefined
            DWIN_Draw_String(false, false, font6x12, Color_White, Color_Bg_Blue, start_x_px + cell_width_px / 2 - 5, start_y_px + offset_y, F("X"));
          }
          else {                          // has value
            if (GRID_MAX_POINTS_X < 10)
              sprintf_P(buf, PSTR("%s"), dtostrf(abs(mesh_z_values[x][y]), 1, 2, str_1));
            else
              sprintf_P(buf, PSTR("%02i"), (uint16_t)(abs(mesh_z_values[x][y] - (int16_t)mesh_z_values[x][y]) * 100));
            offset_x = cell_width_px / 2 - 3 * (strlen(buf)) - 2;
            if (!(GRID_MAX_POINTS_X < 10))
              DWIN_Draw_String(false, false, font6x12, Color_White, Color_Bg_Blue, start_x_px - 2 + offset_x, start_y_px + offset_y /*+ square / 2 - 6*/, F("."));
            DWIN_Draw_String(false, false, font6x12, Color_White, Color_Bg_Blue, start_x_px + 1 + offset_x, start_y_px + offset_y /*+ square / 2 - 6*/, buf);
          }
        }
      }
    }

    void Set_Mesh_Viewer_Status() { // TODO: draw gradient with values as a legend instead
      float v_max = abs(get_max_value()), v_min = abs(get_min_value()), range = max(v_min, v_max);
      if (v_min > 3e+10F) v_min = 0.0000001;
      if (v_max > 3e+10F) v_max = 0.0000001;
      if (range > 3e+10F) range = 0.0000001;
      char msg[32];
      if (viewer_asymmetric_range) {
        dtostrf(-v_min, 1, 3, str_1);
        dtostrf( v_max, 1, 3, str_2);
      }
      else {
        dtostrf(-range, 1, 3, str_1);
        dtostrf( range, 1, 3, str_2);
      }
      sprintf_P(msg, PSTR("Red %s..0..%s Green"), str_1, str_2);
      CrealityDWIN.Update_Status(msg);
      drawing_mesh = false;
    }

  };
  Mesh_Settings mesh_conf;
#endif

/* General Display Functions */

struct CrealityDWINClass::EEPROM_Settings CrealityDWINClass::eeprom_settings{0};
constexpr const char * const CrealityDWINClass::color_names[11];
constexpr const char * const CrealityDWINClass::preheat_modes[3];

// Clear a part of the screen
//  4=Entire screen
//  3=Title bar and Menu area (default)
//  2=Menu area
//  1=Title bar
void CrealityDWINClass::Clear_Screen(uint8_t e/*=3*/) {
  if (e == 1 || e == 3 || e == 4) DWIN_Draw_Rectangle(1, GetColor(eeprom_settings.menu_top_bg, Color_Bg_Blue, false), 0, 0, DWIN_WIDTH, TITLE_HEIGHT); // Clear Title Bar
  if (e == 2 || e == 3) DWIN_Draw_Rectangle(1, Color_Bg_Black, 0, 31, DWIN_WIDTH, STATUS_Y); // Clear Menu Area
  if (e == 4) DWIN_Draw_Rectangle(1, Color_Bg_Black, 0, 31, DWIN_WIDTH, DWIN_HEIGHT); // Clear Popup Area
}

void CrealityDWINClass::Draw_Float(float value, uint8_t row, bool selected/*=false*/, uint8_t minunit/*=10*/) {
  const uint8_t digits = (uint8_t)floor(log10(abs(value))) + log10(minunit) + (minunit > 1);
  const uint16_t bColor = (selected) ? Select_Color : Color_Bg_Black;
  const uint16_t xpos = 240 - (digits * 8);
  DWIN_Draw_Rectangle(1, Color_Bg_Black, 194, MBASE(row), 234 - (digits * 8), MBASE(row) + 16);
  if (isnan(value)) {
    DWIN_Draw_String(false, true, DWIN_FONT_MENU, Color_White, bColor, xpos - 8, MBASE(row), F(" NaN"));
  }
  else if (value < 0) {
    DWIN_Draw_FloatValue(true, true, 0, DWIN_FONT_MENU, Color_White, bColor, digits - log10(minunit) + 1, log10(minunit), xpos, MBASE(row), -value * minunit);
    DWIN_Draw_String(false, true, DWIN_FONT_MENU, Color_White, bColor, xpos - 8, MBASE(row), F("-"));
  }
  else {
    DWIN_Draw_FloatValue(true, true, 0, DWIN_FONT_MENU, Color_White, bColor, digits - log10(minunit) + 1, log10(minunit), xpos, MBASE(row), value * minunit);
    DWIN_Draw_String(false, true, DWIN_FONT_MENU, Color_White, bColor, xpos - 8, MBASE(row), F(" "));
  }
}

void CrealityDWINClass::Draw_Option(uint8_t value, const char * const * options, uint8_t row, bool selected/*=false*/, bool color/*=false*/) {
  uint16_t bColor = (selected) ? Select_Color : Color_Bg_Black;
  uint16_t tColor = (color) ? GetColor(value, Color_White, false) : Color_White;
  DWIN_Draw_Rectangle(1, bColor, 202, MBASE(row) + 14, 258, MBASE(row) - 2);
  DWIN_Draw_String(false, false, DWIN_FONT_MENU, tColor, bColor, 202, MBASE(row) - 1, options[value]);
}

uint16_t CrealityDWINClass::GetColor(uint8_t color, uint16_t original, bool light/*=false*/) {
  switch (color){
    case Default:
      return original;
      break;
    case White:
      return (light) ? Color_Light_White : Color_White;
      break;
    case Green:
      return (light) ? Color_Light_Green : Color_Green;
      break;
    case Cyan:
      return (light) ? Color_Light_Cyan : Color_Cyan;
      break;
    case Blue:
      return (light) ? Color_Light_Blue : Color_Blue;
      break;
    case Magenta:
      return (light) ? Color_Light_Magenta : Color_Magenta;
      break;
    case Red:
      return (light) ? Color_Light_Red : Color_Red;
      break;
    case Orange:
      return (light) ? Color_Light_Orange : Color_Orange;
      break;
    case Yellow:
      return (light) ? Color_Light_Yellow : Color_Yellow;
      break;
    case Brown:
      return (light) ? Color_Light_Brown : Color_Brown;
      break;
    case Black:
      return Color_Black;
      break;
  }
  return Color_White;
}

void CrealityDWINClass::Draw_Title(const char * title) {
  DWIN_Draw_String(false, false, DWIN_FONT_HEAD, GetColor(eeprom_settings.menu_top_txt, Color_White, false), Color_Bg_Blue, (DWIN_WIDTH - strlen(title) * STAT_CHR_W) / 2, 5, title);
}

void CrealityDWINClass::Draw_Menu_Item(uint8_t row, uint8_t icon/*=0*/, const char * label1, const char * label2, bool more/*=false*/, bool centered/*=false*/) {
  const uint8_t label_offset_y = !(label1 && label2) ? 0 : MENU_CHR_H * 3 / 5;
  const uint8_t label1_offset_x = !centered ? LBLX : LBLX * 4/5 + max(LBLX * 1U/5, (DWIN_WIDTH - LBLX - (label1 ? strlen(label1) : 0) * MENU_CHR_W) / 2);
  const uint8_t label2_offset_x = !centered ? LBLX : LBLX * 4/5 + max(LBLX * 1U/5, (DWIN_WIDTH - LBLX - (label2 ? strlen(label2) : 0) * MENU_CHR_W) / 2);
  if (label1) DWIN_Draw_String(false, false, DWIN_FONT_MENU, Color_White, Color_Bg_Black, label1_offset_x, MBASE(row) - 1 - label_offset_y, label1); // Draw Label
  if (label2) DWIN_Draw_String(false, false, DWIN_FONT_MENU, Color_White, Color_Bg_Black, label2_offset_x, MBASE(row) - 1 + label_offset_y, label2); // Draw Label
  if (icon) DWIN_ICON_Show(ICON, icon, 26, MBASE(row) - 3);   //Draw Menu Icon
  if (more) DWIN_ICON_Show(ICON, ICON_More, 226, MBASE(row) - 3); // Draw More Arrow
  DWIN_Draw_Line(GetColor(eeprom_settings.menu_split_line, Line_Color, true), 16, MBASE(row) + 33, 256, MBASE(row) + 33); // Draw Menu Line
}

void CrealityDWINClass::Draw_Checkbox(uint8_t row, bool value) {
  #if ENABLED(DWIN_CREALITY_LCD_CUSTOM_ICONS) // Draw appropriate checkbox icon
    DWIN_ICON_Show(ICON, (value ? ICON_Checkbox_T : ICON_Checkbox_F), 226, MBASE(row) - 3);
  #else                                         // Draw a basic checkbox using rectangles and lines
    DWIN_Draw_Rectangle(1, Color_Bg_Black, 226, MBASE(row) - 3, 226 + 20, MBASE(row) - 3 + 20);
    DWIN_Draw_Rectangle(0, Color_White, 226, MBASE(row) - 3, 226 + 20, MBASE(row) - 3 + 20);
    if (value) {
      DWIN_Draw_Line(Check_Color, 227, MBASE(row) - 3 + 11, 226 + 8, MBASE(row) - 3 + 17);
      DWIN_Draw_Line(Check_Color, 227 + 8, MBASE(row) - 3 + 17, 226 + 19, MBASE(row) - 3 + 1);
      DWIN_Draw_Line(Check_Color, 227, MBASE(row) - 3 + 12, 226 + 8, MBASE(row) - 3 + 18);
      DWIN_Draw_Line(Check_Color, 227 + 8, MBASE(row) - 3 + 18, 226 + 19, MBASE(row) - 3 + 2);
      DWIN_Draw_Line(Check_Color, 227, MBASE(row) - 3 + 13, 226 + 8, MBASE(row) - 3 + 19);
      DWIN_Draw_Line(Check_Color, 227 + 8, MBASE(row) - 3 + 19, 226 + 19, MBASE(row) - 3 + 3);
    }
  #endif
}

void CrealityDWINClass::Draw_Menu(uint8_t menu, uint8_t select/*=0*/, uint8_t scroll/*=0*/) {
  if (active_menu != menu) {
    last_menu = active_menu;
    if (process == Menu) last_selection = selection;
  }
  selection = min(select, Get_Menu_Size(menu));
  scrollpos = scroll;
  if (selection - scrollpos > MROWS)
    scrollpos = selection - MROWS;
  process = Menu;
  active_menu = menu;
  Clear_Screen();
  Draw_Title(Get_Menu_Title(menu));
  LOOP_L_N(i, TROWS) Menu_Item_Handler(menu, i + scrollpos);
  DWIN_Draw_Rectangle(1, GetColor(eeprom_settings.cursor_color, Rectangle_Color), 0, MBASE(selection - scrollpos) - 18, 14, MBASE(selection - scrollpos) + 33);
}

void CrealityDWINClass::Redraw_Menu(bool lastprocess/*=true*/, bool lastselection/*=false*/, bool lastmenu/*=false*/) {
  switch ((lastprocess) ? last_process : process) {
    case Menu:
      Draw_Menu((lastmenu) ? last_menu : active_menu, (lastselection) ? last_selection : selection, (lastmenu) ? 0 : scrollpos);
      break;
    case Main:  Draw_Main_Menu((lastselection) ? last_selection : selection); break;
    case Print: Draw_Print_Screen(); break;
    case File:  Draw_SD_List(); break;
    default: break;
  }
}

void CrealityDWINClass::Redraw_Screen() {
  Redraw_Menu(false);
  Draw_Status_Area(true);
  Update_Status_Bar(true);
}

/* Primary Menus and Screen Elements */

void CrealityDWINClass::Main_Menu_Icons() {
  if (selection == 0) {
    DWIN_ICON_Show(ICON, ICON_Print_1, 17, 130);
    DWIN_Draw_Rectangle(0, GetColor(eeprom_settings.highlight_box, Color_White), 17, 130, 126, 229);
    DWIN_Draw_String(false, false, DWIN_FONT_MENU, Color_White, Color_Bg_Blue, 52, 200, F("Print"));
  }
  else {
    DWIN_ICON_Show(ICON, ICON_Print_0, 17, 130);
    DWIN_Draw_String(false, false, DWIN_FONT_MENU, Color_White, Color_Bg_Blue, 52, 200, F("Print"));
  }
  if (selection == 1) {
    DWIN_ICON_Show(ICON, ICON_Prepare_1, 145, 130);
    DWIN_Draw_Rectangle(0, GetColor(eeprom_settings.highlight_box, Color_White), 145, 130, 254, 229);
    DWIN_Draw_String(false, false, DWIN_FONT_MENU, Color_White, Color_Bg_Blue, 170, 200, F("Prepare"));
  }
  else {
    DWIN_ICON_Show(ICON, ICON_Prepare_0, 145, 130);
    DWIN_Draw_String(false, false, DWIN_FONT_MENU, Color_White, Color_Bg_Blue, 170, 200, F("Prepare"));
  }
  if (selection == 2) {
    DWIN_ICON_Show(ICON, ICON_Control_1, 17, 246);
    DWIN_Draw_Rectangle(0, GetColor(eeprom_settings.highlight_box, Color_White), 17, 246, 126, 345);
    DWIN_Draw_String(false, false, DWIN_FONT_MENU, Color_White, Color_Bg_Blue, 43, 317, F("Control"));
  }
  else {
    DWIN_ICON_Show(ICON, ICON_Control_0, 17, 246);
    DWIN_Draw_String(false, false, DWIN_FONT_MENU, Color_White, Color_Bg_Blue, 43, 317, F("Control"));
  }
  #if HAS_ABL_OR_UBL
    if (selection == 3) {
      DWIN_ICON_Show(ICON, ICON_Leveling_1, 145, 246);
      DWIN_Draw_Rectangle(0, GetColor(eeprom_settings.highlight_box, Color_White), 145, 246, 254, 345);
      DWIN_Draw_String(false, false, DWIN_FONT_MENU, Color_White, Color_Bg_Blue, 179, 317, F("Level"));
    }
    else {
      DWIN_ICON_Show(ICON, ICON_Leveling_0, 145, 246);
      DWIN_Draw_String(false, false, DWIN_FONT_MENU, Color_White, Color_Bg_Blue, 179, 317, F("Level"));
    }
  #else
    if (selection == 3) {
      DWIN_ICON_Show(ICON, ICON_Info_1, 145, 246);
      DWIN_Draw_Rectangle(0, GetColor(eeprom_settings.highlight_box, Color_White), 145, 246, 254, 345);
      DWIN_Draw_String(false, false, DWIN_FONT_MENU, Color_White, Color_Bg_Blue, 181, 317, F("Info"));
    }
    else {
      DWIN_ICON_Show(ICON, ICON_Info_0, 145, 246);
      DWIN_Draw_String(false, false, DWIN_FONT_MENU, Color_White, Color_Bg_Blue, 181, 317, F("Info"));
      //DWIN_Frame_AreaCopy(1, 132, 423, 159, 435, 186, 318);
    }
  #endif
}

void CrealityDWINClass::Draw_Main_Menu(uint8_t select/*=0*/) {
  process = Main;
  active_menu = MainMenu;
  selection = select;
  Clear_Screen();
  Draw_Title(Get_Menu_Title(MainMenu));
  SERIAL_ECHOPGM("\nDWIN handshake ");
  DWIN_ICON_Show(ICON, ICON_LOGO, 71, 72);
  Main_Menu_Icons();
}

void CrealityDWINClass::Print_Screen_Icons() {
  if (selection == 0) {
    DWIN_ICON_Show(ICON, ICON_Setup_1, 8, 252);
    DWIN_Draw_Rectangle(0, GetColor(eeprom_settings.highlight_box, Color_White), 8, 252, 87, 351);
    DWIN_Draw_String(false, false, DWIN_FONT_MENU, Color_White, Color_Bg_Blue, 30, 322, F("Tune"));
  }
  else {
    DWIN_ICON_Show(ICON, ICON_Setup_0, 8, 252);
    DWIN_Draw_String(false, false, DWIN_FONT_MENU, Color_White, Color_Bg_Blue, 30, 322, F("Tune"));
  }
  if (selection == 2) {
    DWIN_ICON_Show(ICON, ICON_Stop_1, 184, 252);
    DWIN_Draw_Rectangle(0, GetColor(eeprom_settings.highlight_box, Color_White), 184, 252, 263, 351);
    DWIN_Draw_String(false, false, DWIN_FONT_MENU, Color_White, Color_Bg_Blue, 205, 322, F("Stop"));
  }
  else {
    DWIN_ICON_Show(ICON, ICON_Stop_0, 184, 252);
    DWIN_Draw_String(false, false, DWIN_FONT_MENU, Color_White, Color_Bg_Blue, 205, 322, F("Stop"));
  }
  if (paused) {
    if (selection == 1) {
      DWIN_ICON_Show(ICON, ICON_Continue_1, 96, 252);
      DWIN_Draw_Rectangle(0, GetColor(eeprom_settings.highlight_box, Color_White), 96, 252, 175, 351);
      DWIN_Draw_String(false, false, DWIN_FONT_MENU, Color_White, Color_Bg_Blue, 114, 322, F("Print"));
    }
    else {
      DWIN_ICON_Show(ICON, ICON_Continue_0, 96, 252);
      DWIN_Draw_String(false, false, DWIN_FONT_MENU, Color_White, Color_Bg_Blue, 114, 322, F("Print"));
    }
  }
  else {
    if (selection == 1) {
      DWIN_ICON_Show(ICON, ICON_Pause_1, 96, 252);
      DWIN_Draw_Rectangle(0, GetColor(eeprom_settings.highlight_box, Color_White), 96, 252, 175, 351);
      DWIN_Draw_String(false, false, DWIN_FONT_MENU, Color_White, Color_Bg_Blue, 114, 322, F("Pause"));
    }
    else {
      DWIN_ICON_Show(ICON, ICON_Pause_0, 96, 252);
      DWIN_Draw_String(false, false, DWIN_FONT_MENU, Color_White, Color_Bg_Blue, 114, 322, F("Pause"));
    }
  }
}

void CrealityDWINClass::Draw_Print_Screen() {
  process = Print;
  selection = 0;
  Clear_Screen();
  DWIN_Draw_Rectangle(1, Color_Bg_Black, 8, 352, DWIN_WIDTH - 8, 376);
  Draw_Title("Printing...");
  Print_Screen_Icons();
  DWIN_ICON_Show(ICON, ICON_PrintTime, 14, 171);
  DWIN_ICON_Show(ICON, ICON_RemainTime, 147, 169);
  DWIN_Draw_String(false, false, DWIN_FONT_MENU, Color_White, Color_Bg_Black, 41, 163, "Elapsed");
  DWIN_Draw_String(false, false, DWIN_FONT_MENU,  Color_White, Color_Bg_Black, 176, 163, "Remaining");
  Update_Status_Bar(true);
  Draw_Print_ProgressBar();
  Draw_Print_ProgressElapsed();
  TERN_(USE_M73_REMAINING_TIME, Draw_Print_ProgressRemain());
  Draw_Print_Filename(true);
}

void CrealityDWINClass::Draw_Print_Filename(const bool reset/*=false*/) {
  static uint8_t namescrl = 0;
  if (reset) namescrl = 0;
  if (process == Print) {
    size_t len = strlen(filename);
    int8_t pos = len;
    if (pos > 30) {
      pos -= namescrl;
      len = _MIN(pos, 30);
      char dispname[len + 1];
      if (pos >= 0) {
        LOOP_L_N(i, len) dispname[i] = filename[i + namescrl];
      }
      else {
        LOOP_L_N(i, 30 + pos) dispname[i] = ' ';
        LOOP_S_L_N(i, 30 + pos, 30) dispname[i] = filename[i - (30 + pos)];
      }
      dispname[len] = '\0';
      DWIN_Draw_Rectangle(1, Color_Bg_Black, 8, 50, DWIN_WIDTH - 8, 80);
      const int8_t npos = (DWIN_WIDTH - 30 * MENU_CHR_W) / 2;
      DWIN_Draw_String(false, false, DWIN_FONT_MENU, Color_White, Color_Bg_Black, npos, 60, dispname);
      if (-pos >= 30) namescrl = 0;
      namescrl++;
    }
    else {
      DWIN_Draw_Rectangle(1, Color_Bg_Black, 8, 50, DWIN_WIDTH - 8, 80);
      const int8_t npos = (DWIN_WIDTH - strlen(filename) * MENU_CHR_W) / 2;
      DWIN_Draw_String(false, false, DWIN_FONT_MENU, Color_White, Color_Bg_Black, npos, 60, filename);
    }
  }
}

void CrealityDWINClass::Draw_Print_ProgressBar() {
  uint8_t printpercent = sdprint ? card.percentDone() : (ui._get_progress() / 100);
  DWIN_ICON_Show(ICON, ICON_Bar, 15, 93);
  DWIN_Draw_Rectangle(1, BarFill_Color, 16 + printpercent * 240 / 100, 93, 256, 113);
  DWIN_Draw_IntValue(true, true, 0, DWIN_FONT_MENU, GetColor(eeprom_settings.progress_percent, Percent_Color), Color_Bg_Black, 3, 109, 133, printpercent);
  DWIN_Draw_String(false, false, DWIN_FONT_MENU, GetColor(eeprom_settings.progress_percent, Percent_Color), Color_Bg_Black, 133, 133, "%");
}

#if ENABLED(USE_M73_REMAINING_TIME)

  void CrealityDWINClass::Draw_Print_ProgressRemain() {
    uint16_t remainingtime = ui.get_remaining_time();
    DWIN_Draw_IntValue(true, true, 1, DWIN_FONT_MENU, GetColor(eeprom_settings.progress_time, Color_White), Color_Bg_Black, 2, 176, 187, remainingtime / 3600);
    DWIN_Draw_IntValue(true, true, 1, DWIN_FONT_MENU, GetColor(eeprom_settings.progress_time, Color_White), Color_Bg_Black, 2, 200, 187, (remainingtime % 3600) / 60);
    if (eeprom_settings.time_format_textual) {
      DWIN_Draw_String(false, false, DWIN_FONT_MENU, GetColor(eeprom_settings.progress_time, Color_White), Color_Bg_Black, 192, 187, "h");
      DWIN_Draw_String(false, false, DWIN_FONT_MENU, GetColor(eeprom_settings.progress_time, Color_White), Color_Bg_Black, 216, 187, "m");
    }
    else
      DWIN_Draw_String(false, false, DWIN_FONT_MENU, GetColor(eeprom_settings.progress_time, Color_White), Color_Bg_Black, 192, 187, ":");
  }

#endif

void CrealityDWINClass::Draw_Print_ProgressElapsed() {
  duration_t elapsed = print_job_timer.duration();
  DWIN_Draw_IntValue(true, true, 1, DWIN_FONT_MENU, GetColor(eeprom_settings.progress_time, Color_White), Color_Bg_Black, 2, 42, 187, elapsed.value / 3600);
  DWIN_Draw_IntValue(true, true, 1, DWIN_FONT_MENU, GetColor(eeprom_settings.progress_time, Color_White), Color_Bg_Black, 2, 66, 187, (elapsed.value % 3600) / 60);
  if (eeprom_settings.time_format_textual) {
    DWIN_Draw_String(false, false, DWIN_FONT_MENU, GetColor(eeprom_settings.progress_time, Color_White), Color_Bg_Black, 58, 187, "h");
    DWIN_Draw_String(false, false, DWIN_FONT_MENU, GetColor(eeprom_settings.progress_time, Color_White), Color_Bg_Black, 82, 187, "m");
  }
  else
    DWIN_Draw_String(false, false, DWIN_FONT_MENU, GetColor(eeprom_settings.progress_time, Color_White), Color_Bg_Black, 58, 187, ":");
}

void CrealityDWINClass::Draw_Print_confirm() {
  Draw_Print_Screen();
  process = Confirm;
  popup = Complete;
  DWIN_Draw_Rectangle(1, Color_Bg_Black, 8, 252, 263, 351);
  DWIN_ICON_Show(ICON, ICON_Confirm_E, 87, 283);
  DWIN_Draw_Rectangle(0, GetColor(eeprom_settings.highlight_box, Color_White), 86, 282, 187, 321);
  DWIN_Draw_Rectangle(0, GetColor(eeprom_settings.highlight_box, Color_White), 85, 281, 188, 322);
}

void CrealityDWINClass::Draw_SD_Item(uint8_t item, uint8_t row) {
  if (item == 0)
    Draw_Menu_Item(0, ICON_Back, card.flag.workDirIsRoot ? "Back" : "..");
  else {
    card.getfilename_sorted(SD_ORDER(item - 1, card.get_num_Files()));
    char * const filename = card.longest_filename();
    size_t max = MENU_CHAR_LIMIT;
    size_t pos = strlen(filename), len = pos;
    if (!card.flag.filenameIsDir)
      while (pos && filename[pos] != '.') pos--;
    len = pos;
    if (len > max) len = max;
    char name[len + 1];
    LOOP_L_N(i, len) name[i] = filename[i];
    if (pos > max)
      LOOP_S_L_N(i, len - 3, len) name[i] = '.';
    name[len] = '\0';
    Draw_Menu_Item(row, card.flag.filenameIsDir ? ICON_More : ICON_File, name);
  }
}

void CrealityDWINClass::Draw_SD_List(bool removed/*=false*/) {
  Clear_Screen();
  Draw_Title("Select File");
  selection = 0;
  scrollpos = 0;
  process = File;
  if (card.isMounted() && !removed) {
    LOOP_L_N(i, _MIN(card.get_num_Files() + 1, TROWS))
      Draw_SD_Item(i, i);
  }
  else {
    Draw_Menu_Item(0, ICON_Back, "Back");
    DWIN_Draw_Rectangle(1, Color_Bg_Red, 10, MBASE(3) - 10, DWIN_WIDTH - 10, MBASE(4));
    DWIN_Draw_String(false, false, font16x32, Color_Yellow, Color_Bg_Red, ((DWIN_WIDTH) - 8 * 16) / 2, MBASE(3), "No Media");
  }
  DWIN_Draw_Rectangle(1, GetColor(eeprom_settings.cursor_color, Rectangle_Color), 0, MBASE(0) - 18, 14, MBASE(0) + 33);
}

void CrealityDWINClass::Draw_Status_Area(bool icons/*=false*/) {

  if (icons) DWIN_Draw_Rectangle(1, Color_Bg_Black, 0, STATUS_Y, DWIN_WIDTH, DWIN_HEIGHT - 1);

  #if HAS_HOTEND
    static float hotend = -1;
    static int16_t hotendtarget = -1, flow = -1;
    if (icons) {
      hotend = -1;
      hotendtarget = -1;
      DWIN_ICON_Show(ICON, ICON_HotendTemp, 10, 383);
      DWIN_Draw_String(false, false, DWIN_FONT_STAT, GetColor(eeprom_settings.status_area_text, Color_White), Color_Bg_Black, 25 + 3 * STAT_CHR_W + 5, 384, F("/"));
    }
    if (thermalManager.temp_hotend[0].celsius != hotend) {
      hotend = thermalManager.temp_hotend[0].celsius;
      DWIN_Draw_IntValue(true, true, 0, DWIN_FONT_STAT, GetColor(eeprom_settings.status_area_text, Color_White), Color_Bg_Black, 3, 28, 384, thermalManager.temp_hotend[0].celsius);
      DWIN_Draw_DegreeSymbol(GetColor(eeprom_settings.status_area_text, Color_White), 25 + 3 * STAT_CHR_W + 5, 386);
    }
    if (thermalManager.temp_hotend[0].target != hotendtarget) {
      hotendtarget = thermalManager.temp_hotend[0].target;
      DWIN_Draw_IntValue(true, true, 0, DWIN_FONT_STAT, GetColor(eeprom_settings.status_area_text, Color_White), Color_Bg_Black, 3, 25 + 4 * STAT_CHR_W + 6, 384, thermalManager.temp_hotend[0].target);
      DWIN_Draw_DegreeSymbol(GetColor(eeprom_settings.status_area_text, Color_White), 25 + 4 * STAT_CHR_W + 39, 386);
    }
    if (icons) {
      flow = -1;
      DWIN_ICON_Show(ICON, ICON_StepE, 112, 417);
      DWIN_Draw_String(false, false, DWIN_FONT_STAT, GetColor(eeprom_settings.status_area_text, Color_White), Color_Bg_Black, 116 + 5 * STAT_CHR_W + 2, 417, F("%"));
    }
    if (planner.flow_percentage[0] != flow) {
      flow = planner.flow_percentage[0];
      DWIN_Draw_IntValue(true, true, 0, DWIN_FONT_STAT, GetColor(eeprom_settings.status_area_text, Color_White), Color_Bg_Black, 3, 116 + 2 * STAT_CHR_W, 417, planner.flow_percentage[0]);
    }
  #endif

  #if HAS_HEATED_BED
    static float bed = -1;
    static int16_t bedtarget = -1;
    if (icons) {
      bed = -1;
      bedtarget = -1;
      DWIN_ICON_Show(ICON, ICON_BedTemp, 10, 416);
      DWIN_Draw_String(false, false, DWIN_FONT_STAT, GetColor(eeprom_settings.status_area_text, Color_White), Color_Bg_Black, 25 + 3 * STAT_CHR_W + 5, 417, F("/"));
    }
    if (thermalManager.temp_bed.celsius != bed) {
      bed = thermalManager.temp_bed.celsius;
      DWIN_Draw_IntValue(true, true, 0, DWIN_FONT_STAT, GetColor(eeprom_settings.status_area_text, Color_White), Color_Bg_Black, 3, 28, 417, thermalManager.temp_bed.celsius);
      DWIN_Draw_DegreeSymbol(GetColor(eeprom_settings.status_area_text, Color_White), 25 + 3 * STAT_CHR_W + 5, 419);
    }
    if (thermalManager.temp_bed.target != bedtarget) {
      bedtarget = thermalManager.temp_bed.target;
      DWIN_Draw_IntValue(true, true, 0, DWIN_FONT_STAT, GetColor(eeprom_settings.status_area_text, Color_White), Color_Bg_Black, 3, 25 + 4 * STAT_CHR_W + 6, 417, thermalManager.temp_bed.target);
      DWIN_Draw_DegreeSymbol(GetColor(eeprom_settings.status_area_text, Color_White), 25 + 4 * STAT_CHR_W + 39, 419);
    }
  #endif

  #if HAS_FAN
    static uint8_t fan = -1;
    if (icons) {
      fan = -1;
      DWIN_ICON_Show(ICON, ICON_FanSpeed, 187, 383);
    }
    if (thermalManager.fan_speed[0] != fan) {
      fan = thermalManager.fan_speed[0];
      DWIN_Draw_IntValue(true, true, 0, DWIN_FONT_STAT, GetColor(eeprom_settings.status_area_text, Color_White), Color_Bg_Black, 3, 195 + 2 * STAT_CHR_W, 384, thermalManager.fan_speed[0]);
    }
  #endif

  #if HAS_ZOFFSET_ITEM
    static float offset = -1;

    if (icons) {
      offset = -1;
      DWIN_ICON_Show(ICON, ICON_Zoffset, 187, 416);
    }
    if (zoffsetvalue != offset) {
      offset = zoffsetvalue;
      if (zoffsetvalue < 0) {
        DWIN_Draw_FloatValue(true, true, 0, DWIN_FONT_STAT, GetColor(eeprom_settings.status_area_text, Color_White), Color_Bg_Black, 2, 2, 207, 417, -zoffsetvalue * 100);
        DWIN_Draw_String(false, true, DWIN_FONT_MENU, GetColor(eeprom_settings.status_area_text, Color_White), Color_Bg_Black, 205, 419, "-");
      }
      else {
        DWIN_Draw_FloatValue(true, true, 0, DWIN_FONT_STAT, GetColor(eeprom_settings.status_area_text, Color_White), Color_Bg_Black, 2, 2, 207, 417, zoffsetvalue* 100);
        DWIN_Draw_String(false, true, DWIN_FONT_MENU, GetColor(eeprom_settings.status_area_text, Color_White), Color_Bg_Black, 205, 419, " ");
      }
    }
  #endif

  static int16_t feedrate = -1;
  if (icons) {
    feedrate = -1;
    DWIN_ICON_Show(ICON, ICON_Speed, 113, 383);
    DWIN_Draw_String(false, false, DWIN_FONT_STAT, GetColor(eeprom_settings.status_area_text, Color_White), Color_Bg_Black, 116 + 5 * STAT_CHR_W + 2, 384, F("%"));
  }
  if (feedrate_percentage != feedrate) {
    feedrate = feedrate_percentage;
    DWIN_Draw_IntValue(true, true, 0, DWIN_FONT_STAT, GetColor(eeprom_settings.status_area_text, Color_White), Color_Bg_Black, 3, 116 + 2 * STAT_CHR_W, 384, feedrate_percentage);
  }

  static float x = -1, y = -1, z = -1;
  static bool update_x = false, update_y = false, update_z = false;
  update_x = (current_position.x != x || axis_should_home(X_AXIS) || update_x);
  update_y = (current_position.y != y || axis_should_home(Y_AXIS) || update_y);
  update_z = (current_position.z != z || axis_should_home(Z_AXIS) || update_z);
  if (icons) {
    x = y = z = -1;
    DWIN_Draw_Line(GetColor(eeprom_settings.coordinates_split_line, Line_Color, true), 16, 450, 256, 450);
    DWIN_ICON_Show(ICON, ICON_MaxSpeedX,  10, 456);
    DWIN_ICON_Show(ICON, ICON_MaxSpeedY,  95, 456);
    DWIN_ICON_Show(ICON, ICON_MaxSpeedZ, 180, 456);
  }
  if (update_x) {
    x = current_position.x;
    if ((update_x = axis_should_home(X_AXIS) && ui.get_blink()))
      DWIN_Draw_String(false, true, DWIN_FONT_MENU, GetColor(eeprom_settings.coordinates_text, Color_White), Color_Bg_Black, 35, 459, "  -?-  ");
    else
      DWIN_Draw_FloatValue(true, true, 0, DWIN_FONT_MENU, GetColor(eeprom_settings.coordinates_text, Color_White), Color_Bg_Black, 3, 1, 35, 459, current_position.x * 10);
  }
  if (update_y) {
    y = current_position.y;
    if ((update_y = axis_should_home(Y_AXIS) && ui.get_blink()))
      DWIN_Draw_String(false, true, DWIN_FONT_MENU, GetColor(eeprom_settings.coordinates_text, Color_White), Color_Bg_Black, 120, 459, "  -?-  ");
    else
      DWIN_Draw_FloatValue(true, true, 0, DWIN_FONT_MENU, GetColor(eeprom_settings.coordinates_text, Color_White), Color_Bg_Black, 3, 1, 120, 459, current_position.y * 10);
  }
  if (update_z) {
    z = current_position.z;
    if ((update_z = axis_should_home(Z_AXIS) && ui.get_blink()))
      DWIN_Draw_String(false, true, DWIN_FONT_MENU, GetColor(eeprom_settings.coordinates_text, Color_White), Color_Bg_Black, 205, 459, "  -?-  ");
    else
      DWIN_Draw_FloatValue(true, true, 0, DWIN_FONT_MENU, GetColor(eeprom_settings.coordinates_text, Color_White), Color_Bg_Black, 3, 2, 205, 459, (current_position.z>=0) ? current_position.z * 100 : 0);
  }
  DWIN_UpdateLCD();
}

void CrealityDWINClass::Draw_Popup(PGM_P const line1, PGM_P const line2, PGM_P const line3, uint8_t mode, uint8_t icon/*=0*/) {
  if (process != Confirm && process != Popup && process != Wait) last_process = process;
  if ((process == Menu || process == Wait) && mode == Popup) last_selection = selection;
  process = mode;
  Clear_Screen();
  DWIN_Draw_Rectangle(0, Color_White, 13, 59, 259, 351);
  DWIN_Draw_Rectangle(1, Color_Bg_Window, 14, 60, 258, 350);
  const uint8_t ypos = (mode == Popup || mode == Confirm) ? 150 : 230;
  if (icon > 0) DWIN_ICON_Show(ICON, icon, 101, 105);
  DWIN_Draw_String(false, true, DWIN_FONT_MENU, Popup_Text_Color, Color_Bg_Window, (272 - 8 * strlen_P(line1)) / 2, ypos, line1);
  DWIN_Draw_String(false, true, DWIN_FONT_MENU, Popup_Text_Color, Color_Bg_Window, (272 - 8 * strlen_P(line2)) / 2, ypos + 30, line2);
  DWIN_Draw_String(false, true, DWIN_FONT_MENU, Popup_Text_Color, Color_Bg_Window, (272 - 8 * strlen_P(line3)) / 2, ypos + 60, line3);
  if (mode == Popup) {
    selection = 0;
    DWIN_Draw_Rectangle(1, Confirm_Color, 26, 280, 125, 317);
    DWIN_Draw_Rectangle(1, Cancel_Color, 146, 280, 245, 317);
    DWIN_Draw_String(false, false, DWIN_FONT_STAT, Color_White, Color_Bg_Window, 39, 290, "Confirm");
    DWIN_Draw_String(false, false, DWIN_FONT_STAT, Color_White, Color_Bg_Window, 165, 290, "Cancel");
    Popup_Select();
  }
  else if (mode == Confirm) {
    DWIN_Draw_Rectangle(1, Confirm_Color, 87, 280, 186, 317);
    DWIN_Draw_String(false, false, DWIN_FONT_STAT, Color_White, Color_Bg_Window, 96, 290, "Continue");
  }
}

void MarlinUI::kill_screen(PGM_P const error, PGM_P const component) {
  CrealityDWIN.Draw_Popup(PSTR("Printer Kill Reason:"), error, PSTR("Restart Required"), Wait, ICON_BLTouch);
}

void CrealityDWINClass::Popup_Select() {
  const uint16_t c1 = (selection == 0) ? GetColor(eeprom_settings.highlight_box, Color_White) : Color_Bg_Window,
                 c2 = (selection == 0) ? Color_Bg_Window : GetColor(eeprom_settings.highlight_box, Color_White);
  DWIN_Draw_Rectangle(0, c1, 25, 279, 126, 318);
  DWIN_Draw_Rectangle(0, c1, 24, 278, 127, 319);
  DWIN_Draw_Rectangle(0, c2, 145, 279, 246, 318);
  DWIN_Draw_Rectangle(0, c2, 144, 278, 247, 319);
}

void CrealityDWINClass::Update_Status_Bar(bool refresh/*=false*/) {
  static bool new_msg;
  static uint8_t msgscrl = 0;
  static char lastmsg[64];
  if (strcmp_P(lastmsg, statusmsg) != 0 || refresh) {
    strcpy_P(lastmsg, statusmsg);
    msgscrl = 0;
    new_msg = true;
  }
  size_t len = strlen(statusmsg);
  int8_t pos = len;
  if (pos > 30) {
    pos -= msgscrl;
    len = pos;
    if (len > 30)
      len = 30;
    char dispmsg[len + 1];
    if (pos >= 0) {
      LOOP_L_N(i, len) dispmsg[i] = statusmsg[i + msgscrl];
    }
    else {
      LOOP_L_N(i, 30 + pos) dispmsg[i] = ' ';
      LOOP_S_L_N(i, 30 + pos, 30) dispmsg[i] = statusmsg[i - (30 + pos)];
    }
    dispmsg[len] = '\0';
    if (process == Print) {
      DWIN_Draw_Rectangle(1, Color_Grey, 8, 214, DWIN_WIDTH - 8, 238);
      const int8_t npos = (DWIN_WIDTH - 30 * MENU_CHR_W) / 2;
      DWIN_Draw_String(false, false, DWIN_FONT_MENU, GetColor(eeprom_settings.status_bar_text, Color_White), Color_Bg_Black, npos, 219, dispmsg);
    }
    else {
      DWIN_Draw_Rectangle(1, Color_Bg_Black, 8, 352, DWIN_WIDTH - 8, 376);
      const int8_t npos = (DWIN_WIDTH - 30 * MENU_CHR_W) / 2;
      DWIN_Draw_String(false, false, DWIN_FONT_MENU, GetColor(eeprom_settings.status_bar_text, Color_White), Color_Bg_Black, npos, 357, dispmsg);
    }
    if (-pos >= 30) msgscrl = 0;
    msgscrl++;
  }
  else {
    if (new_msg) {
      new_msg = false;
      if (process == Print) {
        DWIN_Draw_Rectangle(1, Color_Grey, 8, 214, DWIN_WIDTH - 8, 238);
        const int8_t npos = (DWIN_WIDTH - strlen(statusmsg) * MENU_CHR_W) / 2;
        DWIN_Draw_String(false, false, DWIN_FONT_MENU, GetColor(eeprom_settings.status_bar_text, Color_White), Color_Bg_Black, npos, 219, statusmsg);
      }
      else {
        DWIN_Draw_Rectangle(1, Color_Bg_Black, 8, 352, DWIN_WIDTH - 8, 376);
        const int8_t npos = (DWIN_WIDTH - strlen(statusmsg) * MENU_CHR_W) / 2;
        DWIN_Draw_String(false, false, DWIN_FONT_MENU, GetColor(eeprom_settings.status_bar_text, Color_White), Color_Bg_Black, npos, 357, statusmsg);
      }
    }
  }
}

/* Menu Item Config */

void CrealityDWINClass::Menu_Item_Handler(uint8_t menu, uint8_t item, bool draw/*=true*/) {
  uint8_t row = item - scrollpos;
  #if HAS_LEVELING
    static bool level_state;
  #endif
  switch (menu) {
    case Prepare:

      #define PREPARE_BACK 0
      #define PREPARE_MOVE (PREPARE_BACK + 1)
      #define PREPARE_DISABLE (PREPARE_MOVE + 1)
      #define PREPARE_HOME (PREPARE_DISABLE + 1)
      #define PREPARE_MANUALLEVEL (PREPARE_HOME + 1)
      #define PREPARE_ZOFFSET (PREPARE_MANUALLEVEL + ENABLED(HAS_ZOFFSET_ITEM))
      #define PREPARE_PREHEAT (PREPARE_ZOFFSET + ENABLED(HAS_PREHEAT))
      #define PREPARE_COOLDOWN (PREPARE_PREHEAT + ENABLED(HAS_PREHEAT))
      #define PREPARE_CHANGEFIL (PREPARE_COOLDOWN + ENABLED(ADVANCED_PAUSE_FEATURE))
      #define PREPARE_TOTAL PREPARE_CHANGEFIL

      switch (item) {
        case PREPARE_BACK:
          if (draw)
            Draw_Menu_Item(row, ICON_Back, "Back");
          else
            Draw_Main_Menu(1);
          break;
        case PREPARE_MOVE:
          if (draw)
            Draw_Menu_Item(row, ICON_Axis, "Move", nullptr, true);
          else
            Draw_Menu(Move);
          break;
        case PREPARE_DISABLE:
          if (draw)
            Draw_Menu_Item(row, ICON_CloseMotor, "Disable Stepper");
          else
            queue.inject_P(PSTR("M84"));
          break;
        case PREPARE_HOME:
          if (draw)
            Draw_Menu_Item(row, ICON_SetHome, "Homing", nullptr, true);
          else
            Draw_Menu(HomeMenu);
          break;
        case PREPARE_MANUALLEVEL:
          if (draw)
            Draw_Menu_Item(row, ICON_PrintSize, "Manual Leveling", nullptr, true);
          else {
            if (axes_should_home()) {
              Popup_Handler(Home);
              gcode.home_all_axes(true);
            }
            #if HAS_LEVELING
              level_state = planner.leveling_active;
              set_bed_leveling_enabled(false);
            #endif
            Draw_Menu(ManualLevel);
          }
          break;

        #if HAS_ZOFFSET_ITEM
          case PREPARE_ZOFFSET:
            if (draw)
              Draw_Menu_Item(row, ICON_Zoffset, "Z-Offset", nullptr, true);
            else {
              #if HAS_LEVELING
                level_state = planner.leveling_active;
                set_bed_leveling_enabled(false);
              #endif
              Draw_Menu(ZOffset);
            }
            break;
        #endif

        #if HAS_PREHEAT
          case PREPARE_PREHEAT:
            if (draw)
              Draw_Menu_Item(row, ICON_Temperature, "Preheat", nullptr, true);
            else
              Draw_Menu(Preheat);
            break;
          case PREPARE_COOLDOWN:
            if (draw)
              Draw_Menu_Item(row, ICON_Cool, "Cooldown");
            else {
              TERN_(HAS_FAN, thermalManager.zero_fan_speeds());
              thermalManager.disable_all_heaters();
            }
            break;
        #endif

        #if ENABLED(ADVANCED_PAUSE_FEATURE)
          case PREPARE_CHANGEFIL:
            if (draw) {
              Draw_Menu_Item(row, ICON_ResumeEEPROM, "Change Filament"
                #if ENABLED(FILAMENT_LOAD_UNLOAD_GCODES)
                  , nullptr, true
                #endif
              );
            }
            else {
              #if ENABLED(FILAMENT_LOAD_UNLOAD_GCODES)
                Draw_Menu(ChangeFilament);
              #else
                if (thermalManager.temp_hotend[0].target < thermalManager.extrude_min_temp)
                  Popup_Handler(ETemp);
                else {
                  if (thermalManager.temp_hotend[0].celsius < thermalManager.temp_hotend[0].target - 2) {
                    Popup_Handler(Heating);
                    thermalManager.wait_for_hotend(0);
                  }
                  Popup_Handler(FilChange);
                  sprintf_P(cmd, PSTR("M600 B1 R%i"), thermalManager.temp_hotend[0].target);
                  gcode.process_subcommands_now_P(cmd);
                }
              #endif
            }
            break;
        #endif
      }
      break;

    case HomeMenu:

      #define HOME_BACK  0
      #define HOME_ALL   (HOME_BACK + 1)
      #define HOME_X     (HOME_ALL + 1)
      #define HOME_Y     (HOME_X + 1)
      #define HOME_Z     (HOME_Y + 1)
      #define HOME_SET   (HOME_Z + 1)
      #define HOME_TOTAL HOME_SET

      switch (item) {
        case HOME_BACK:
          if (draw)
            Draw_Menu_Item(row, ICON_Back, "Back");
          else
            Draw_Menu(Prepare, PREPARE_HOME);
          break;
        case HOME_ALL:
          if (draw)
            Draw_Menu_Item(row, ICON_Homing, "Home All");
          else {
            Popup_Handler(Home);
            gcode.home_all_axes(true);
            Redraw_Menu();
          }
          break;
        case HOME_X:
          if (draw)
            Draw_Menu_Item(row, ICON_MoveX, "Home X");
          else {
            Popup_Handler(Home);
            gcode.process_subcommands_now_P(PSTR("G28 X"));
            planner.synchronize();
            Redraw_Menu();
          }
          break;
        case HOME_Y:
          if (draw)
            Draw_Menu_Item(row, ICON_MoveY, "Home Y");
          else {
            Popup_Handler(Home);
            gcode.process_subcommands_now_P(PSTR("G28 Y"));
            planner.synchronize();
            Redraw_Menu();
          }
          break;
        case HOME_Z:
          if (draw)
            Draw_Menu_Item(row, ICON_MoveZ,"Home Z");
          else {
            Popup_Handler(Home);
            gcode.process_subcommands_now_P(PSTR("G28 Z"));
            planner.synchronize();
            Redraw_Menu();
          }
          break;
        case HOME_SET:
          if (draw)
            Draw_Menu_Item(row, ICON_SetHome, "Set Home Position");
          else {
            gcode.process_subcommands_now_P(PSTR("G92 X0 Y0 Z0"));
            AudioFeedback();
          }
          break;
      }
      break;

    case Move:

      #define MOVE_BACK 0
      #define MOVE_X (MOVE_BACK + 1)
      #define MOVE_Y (MOVE_X + 1)
      #define MOVE_Z (MOVE_Y + 1)
      #define MOVE_E (MOVE_Z + ENABLED(HAS_HOTEND))
      #define MOVE_P (MOVE_E + ENABLED(HAS_BED_PROBE))
      #define MOVE_LIVE (MOVE_P + 1)
      #define MOVE_TOTAL MOVE_LIVE

      switch (item) {
        case MOVE_BACK:
          if (draw)
            Draw_Menu_Item(row, ICON_Back, "Back");
          else {
            #if HAS_BED_PROBE
              probe_deployed = false;
              probe.set_deployed(probe_deployed);
            #endif
            Draw_Menu(Prepare, PREPARE_MOVE);
          }
          break;
        case MOVE_X:
          if (draw) {
            Draw_Menu_Item(row, ICON_MoveX, "Move X");
            Draw_Float(current_position.x, row, false);
          }
          else
            Modify_Value(current_position.x, X_MIN_POS, X_MAX_POS, 10);
          break;
        case MOVE_Y:
          if (draw) {
            Draw_Menu_Item(row, ICON_MoveY, "Move Y");
            Draw_Float(current_position.y, row);
          }
          else
            Modify_Value(current_position.y, Y_MIN_POS, Y_MAX_POS, 10);
          break;
        case MOVE_Z:
          if (draw) {
            Draw_Menu_Item(row, ICON_MoveZ, "Move Z");
            Draw_Float(current_position.z, row);
          }
          else
            Modify_Value(current_position.z, Z_MIN_POS, Z_MAX_POS, 10);
          break;

        #if HAS_HOTEND
          case MOVE_E:
            if (draw) {
              Draw_Menu_Item(row, ICON_Extruder, "Extruder");
              current_position.e = 0;
              sync_plan_position();
              Draw_Float(current_position.e, row);
            }
            else {
              if (thermalManager.temp_hotend[0].target < thermalManager.extrude_min_temp) {
                Popup_Handler(ETemp);
              }
              else {
                if (thermalManager.temp_hotend[0].celsius < thermalManager.temp_hotend[0].target - 2) {
                  Popup_Handler(Heating);
                  thermalManager.wait_for_hotend(0);
                  Redraw_Menu();
                }
                current_position.e = 0;
                sync_plan_position();
                Modify_Value(current_position.e, -500, 500, 10);
              }
            }
          break;
        #endif // HAS_HOTEND

        #if HAS_BED_PROBE
          case MOVE_P:
            if (draw) {
              Draw_Menu_Item(row, ICON_StockConfiguraton, "Probe");
              Draw_Checkbox(row, probe_deployed);
            }
            else {
              probe_deployed = !probe_deployed;
              probe.set_deployed(probe_deployed);
              Draw_Checkbox(row, probe_deployed);
            }
            break;
        #endif

        case MOVE_LIVE:
          if (draw) {
            Draw_Menu_Item(row, ICON_Axis, "Live Movement");
            Draw_Checkbox(row, livemove);
          }
          else {
            livemove = !livemove;
            Draw_Checkbox(row, livemove);
          }
          break;
      }
      break;
    case ManualLevel:

      #define MLEVEL_BACK 0
      #define MLEVEL_PROBE (MLEVEL_BACK + ENABLED(HAS_BED_PROBE))
      #define MLEVEL_BL (MLEVEL_PROBE + 1)
      #define MLEVEL_TL (MLEVEL_BL + 1)
      #define MLEVEL_TR (MLEVEL_TL + 1)
      #define MLEVEL_BR (MLEVEL_TR + 1)
      #define MLEVEL_C (MLEVEL_BR + 1)
      #define MLEVEL_ZPOS (MLEVEL_C + 1)
      #define MLEVEL_TOTAL MLEVEL_ZPOS

      static float mlev_z_pos = 0;
      static bool use_probe = false;

      switch (item) {
        case MLEVEL_BACK:
          if (draw)
            Draw_Menu_Item(row, ICON_Back, "Back");
          else {
            TERN_(HAS_LEVELING, set_bed_leveling_enabled(level_state));
            Draw_Menu(Prepare, PREPARE_MANUALLEVEL);
          }
          break;
        #if HAS_BED_PROBE
          case MLEVEL_PROBE:
            if (draw) {
              Draw_Menu_Item(row, ICON_Zoffset, "Use Probe");
              Draw_Checkbox(row, use_probe);
            }
            else {
              use_probe = !use_probe;
              Draw_Checkbox(row, use_probe);
              if (use_probe) {
                Popup_Handler(Level);
                corner_avg = 0;
                #define PROBE_X_MIN _MAX(0 + corner_pos, X_MIN_POS + probe.offset.x, X_MIN_POS + PROBING_MARGIN) - probe.offset.x
                #define PROBE_X_MAX _MIN((X_BED_SIZE + X_MIN_POS) - corner_pos, X_MAX_POS + probe.offset.x, X_MAX_POS - PROBING_MARGIN) - probe.offset.x
                #define PROBE_Y_MIN _MAX(0 + corner_pos, Y_MIN_POS + probe.offset.y, Y_MIN_POS + PROBING_MARGIN) - probe.offset.y
                #define PROBE_Y_MAX _MIN((Y_BED_SIZE + Y_MIN_POS) - corner_pos, Y_MAX_POS + probe.offset.y, Y_MAX_POS - PROBING_MARGIN) - probe.offset.y
                corner_avg += probe.probe_at_point(PROBE_X_MIN, PROBE_Y_MIN, PROBE_PT_RAISE, 0, false);
                corner_avg += probe.probe_at_point(PROBE_X_MIN, PROBE_Y_MAX, PROBE_PT_RAISE, 0, false);
                corner_avg += probe.probe_at_point(PROBE_X_MAX, PROBE_Y_MAX, PROBE_PT_RAISE, 0, false);
                corner_avg += probe.probe_at_point(PROBE_X_MAX, PROBE_Y_MIN, PROBE_PT_STOW, 0, false);
                corner_avg /= 4;
                Redraw_Menu();
              }
            }
            break;
        #endif
        case MLEVEL_BL:
          if (draw)
            Draw_Menu_Item(row, ICON_AxisBL, "Bottom Left");
          else {
            Popup_Handler(MoveWait);
            if (use_probe) {
              #if HAS_BED_PROBE
                sprintf_P(cmd, PSTR("G0 F4000\nG0 Z10\nG0 X%s Y%s"), dtostrf(PROBE_X_MIN, 1, 3, str_1), dtostrf(PROBE_Y_MIN, 1, 3, str_2));
                gcode.process_subcommands_now_P(cmd);
                planner.synchronize();
                Popup_Handler(ManualProbing);
              #endif
            }
            else {
              sprintf_P(cmd, PSTR("G0 F4000\nG0 Z10\nG0 X%s Y%s\nG0 F300 Z%s"), dtostrf(corner_pos, 1, 3, str_1), dtostrf(corner_pos, 1, 3, str_2), dtostrf(mlev_z_pos, 1, 3, str_3));
              gcode.process_subcommands_now_P(cmd);
              planner.synchronize();
              Redraw_Menu();
            }
          }
          break;
        case MLEVEL_TL:
          if (draw)
            Draw_Menu_Item(row, ICON_AxisTL, "Top Left");
          else {
            Popup_Handler(MoveWait);
            if (use_probe) {
              #if HAS_BED_PROBE
                sprintf_P(cmd, PSTR("G0 F4000\nG0 Z10\nG0 X%s Y%s"), dtostrf(PROBE_X_MIN, 1, 3, str_1), dtostrf(PROBE_Y_MAX, 1, 3, str_2));
                gcode.process_subcommands_now_P(cmd);
                planner.synchronize();
                Popup_Handler(ManualProbing);
              #endif
            }
            else {
              sprintf_P(cmd, PSTR("G0 F4000\nG0 Z10\nG0 X%s Y%s\nG0 F300 Z%s"), dtostrf(corner_pos, 1, 3, str_1), dtostrf((Y_BED_SIZE + Y_MIN_POS) - corner_pos, 1, 3, str_2), dtostrf(mlev_z_pos, 1, 3, str_3));
              gcode.process_subcommands_now_P(cmd);
              planner.synchronize();
              Redraw_Menu();
            }
          }
          break;
        case MLEVEL_TR:
          if (draw)
            Draw_Menu_Item(row, ICON_AxisTR, "Top Right");
          else {
            Popup_Handler(MoveWait);
            if (use_probe) {
              #if HAS_BED_PROBE
                sprintf_P(cmd, PSTR("G0 F4000\nG0 Z10\nG0 X%s Y%s"), dtostrf(PROBE_X_MAX, 1, 3, str_1), dtostrf(PROBE_Y_MAX, 1, 3, str_2));
                gcode.process_subcommands_now_P(cmd);
                planner.synchronize();
                Popup_Handler(ManualProbing);
              #endif
            }
            else {
              sprintf_P(cmd, PSTR("G0 F4000\nG0 Z10\nG0 X%s Y%s\nG0 F300 Z%s"), dtostrf((X_BED_SIZE + X_MIN_POS) - corner_pos, 1, 3, str_1), dtostrf((Y_BED_SIZE + Y_MIN_POS) - corner_pos, 1, 3, str_2), dtostrf(mlev_z_pos, 1, 3, str_3));
              gcode.process_subcommands_now_P(cmd);
              planner.synchronize();
              Redraw_Menu();
            }
          }
          break;
        case MLEVEL_BR:
          if (draw)
            Draw_Menu_Item(row, ICON_AxisBR, "Bottom Right");
          else {
            Popup_Handler(MoveWait);
            if (use_probe) {
              #if HAS_BED_PROBE
                sprintf_P(cmd, PSTR("G0 F4000\nG0 Z10\nG0 X%s Y%s"), dtostrf(PROBE_X_MAX, 1, 3, str_1), dtostrf(PROBE_Y_MIN, 1, 3, str_2));
                gcode.process_subcommands_now_P(cmd);
                planner.synchronize();
                Popup_Handler(ManualProbing);
              #endif
            }
            else {
              sprintf_P(cmd, PSTR("G0 F4000\nG0 Z10\nG0 X%s Y%s\nG0 F300 Z%s"), dtostrf((X_BED_SIZE + X_MIN_POS) - corner_pos, 1, 3, str_1), dtostrf(corner_pos, 1, 3, str_2), dtostrf(mlev_z_pos, 1, 3, str_3));
              gcode.process_subcommands_now_P(cmd);
              planner.synchronize();
              Redraw_Menu();
            }
          }
          break;
        case MLEVEL_C:
          if (draw)
            Draw_Menu_Item(row, ICON_AxisC, "Center");
          else {
            Popup_Handler(MoveWait);
            if (use_probe) {
              #if HAS_BED_PROBE
                sprintf_P(cmd, PSTR("G0 F4000\nG0 Z10\nG0 X%s Y%s"), dtostrf(X_MAX_POS / 2.0f - probe.offset.x, 1, 3, str_1), dtostrf(Y_MAX_POS / 2.0f - probe.offset.y, 1, 3, str_2));
                gcode.process_subcommands_now_P(cmd);
                planner.synchronize();
                Popup_Handler(ManualProbing);
              #endif
            }
            else {
              sprintf_P(cmd, PSTR("G0 F4000\nG0 Z10\nG0 X%s Y%s\nG0 F300 Z%s"), dtostrf((X_BED_SIZE + X_MIN_POS) / 2.0f, 1, 3, str_1), dtostrf((Y_BED_SIZE + Y_MIN_POS) / 2.0f, 1, 3, str_2), dtostrf(mlev_z_pos, 1, 3, str_3));
              gcode.process_subcommands_now_P(cmd);
              planner.synchronize();
              Redraw_Menu();
            }
          }
          break;
        case MLEVEL_ZPOS:
          if (draw) {
            Draw_Menu_Item(row, ICON_SetZOffset, "Z Position");
            Draw_Float(mlev_z_pos, row, false, 100);
          }
          else
            Modify_Value(mlev_z_pos, 0, MAX_Z_OFFSET, 100);
          break;
      }
      break;
    #if HAS_ZOFFSET_ITEM
      case ZOffset:

        #define ZOFFSET_BACK 0
        #define ZOFFSET_HOME (ZOFFSET_BACK + 1)
        #define ZOFFSET_MODE (ZOFFSET_HOME + 1)
        #define ZOFFSET_OFFSET (ZOFFSET_MODE + 1)
        #define ZOFFSET_UP (ZOFFSET_OFFSET + 1)
        #define ZOFFSET_DOWN (ZOFFSET_UP + 1)
        #define ZOFFSET_SAVE (ZOFFSET_DOWN + ENABLED(EEPROM_SETTINGS))
        #define ZOFFSET_TOTAL ZOFFSET_SAVE

        switch (item) {
          case ZOFFSET_BACK:
            if (draw)
              Draw_Menu_Item(row, ICON_Back, "Back");
            else {
              liveadjust = false;
              TERN_(HAS_LEVELING, set_bed_leveling_enabled(level_state));
              Draw_Menu(Prepare, PREPARE_ZOFFSET);
            }
            break;
          case ZOFFSET_HOME:
            if (draw)
              Draw_Menu_Item(row, ICON_Homing, "Home Z Axis");
            else {
              Popup_Handler(Home);
              gcode.process_subcommands_now_P(PSTR("G28 Z"));
              Popup_Handler(MoveWait);
              #if ENABLED(Z_SAFE_HOMING)
                planner.synchronize();
                sprintf_P(cmd, PSTR("G0 F4000 X%s Y%s"), dtostrf(Z_SAFE_HOMING_X_POINT, 1, 3, str_1), dtostrf(Z_SAFE_HOMING_Y_POINT, 1, 3, str_2));
                gcode.process_subcommands_now_P(cmd);
              #else
                gcode.process_subcommands_now_P(PSTR("G0 F4000 X117.5 Y117.5"));
              #endif
              gcode.process_subcommands_now_P(PSTR("G0 F300 Z0"));
              planner.synchronize();
              Redraw_Menu();
            }
            break;
          case ZOFFSET_MODE:
            if (draw) {
              Draw_Menu_Item(row, ICON_Zoffset, "Live Adjustment");
              Draw_Checkbox(row, liveadjust);
            }
            else {
              if (!liveadjust) {
                if (axes_should_home()) {
                  Popup_Handler(Home);
                  gcode.home_all_axes(true);
                }
                Popup_Handler(MoveWait);
                #if ENABLED(Z_SAFE_HOMING)
                  planner.synchronize();
                  sprintf_P(cmd, PSTR("G0 F4000 X%s Y%s"), dtostrf(Z_SAFE_HOMING_X_POINT, 1, 3, str_1), dtostrf(Z_SAFE_HOMING_Y_POINT, 1, 3, str_2));
                  gcode.process_subcommands_now_P(cmd);
                #else
                  gcode.process_subcommands_now_P(PSTR("G0 F4000 X117.5 Y117.5"));
                #endif
                gcode.process_subcommands_now_P(PSTR("G0 F300 Z0"));
                planner.synchronize();
                Redraw_Menu();
              }
              liveadjust = !liveadjust;
              Draw_Checkbox(row, liveadjust);
            }
            break;
          case ZOFFSET_OFFSET:
            if (draw) {
              Draw_Menu_Item(row, ICON_SetZOffset, "Z Offset");
              Draw_Float(zoffsetvalue, row, false, 100);
            }
            else
              Modify_Value(zoffsetvalue, MIN_Z_OFFSET, MAX_Z_OFFSET, 100);
            break;
          case ZOFFSET_UP:
            if (draw)
              Draw_Menu_Item(row, ICON_Axis, "Microstep Up");
            else {
              if (zoffsetvalue < MAX_Z_OFFSET) {
                if (liveadjust) {
                  gcode.process_subcommands_now_P(PSTR("M290 Z0.01"));
                  planner.synchronize();
                }
                zoffsetvalue += 0.01;
                Draw_Float(zoffsetvalue, row - 1, false, 100);
              }
            }
            break;
          case ZOFFSET_DOWN:
            if (draw)
              Draw_Menu_Item(row, ICON_AxisD, "Microstep Down");
            else {
              if (zoffsetvalue > MIN_Z_OFFSET) {
                if (liveadjust) {
                  gcode.process_subcommands_now_P(PSTR("M290 Z-0.01"));
                  planner.synchronize();
                }
                zoffsetvalue -= 0.01;
                Draw_Float(zoffsetvalue, row - 2, false, 100);
              }
            }
            break;
          #if ENABLED(EEPROM_SETTINGS)
            case ZOFFSET_SAVE:
              if (draw)
                Draw_Menu_Item(row, ICON_WriteEEPROM, "Save");
              else
                AudioFeedback(settings.save());
              break;
          #endif
        }
        break;
    #endif
    #if HAS_PREHEAT
      case Preheat:

        #define PREHEAT_BACK 0
        #define PREHEAT_MODE (PREHEAT_BACK + 1)
        #define PREHEAT_1 (PREHEAT_MODE + (PREHEAT_COUNT >= 1))
        #define PREHEAT_2 (PREHEAT_1 + (PREHEAT_COUNT >= 2))
        #define PREHEAT_3 (PREHEAT_2 + (PREHEAT_COUNT >= 3))
        #define PREHEAT_4 (PREHEAT_3 + (PREHEAT_COUNT >= 4))
        #define PREHEAT_5 (PREHEAT_4 + (PREHEAT_COUNT >= 5))
        #define PREHEAT_TOTAL PREHEAT_5

        switch (item) {
          case PREHEAT_BACK:
            if (draw)
              Draw_Menu_Item(row, ICON_Back, "Back");
            else
              Draw_Menu(Prepare, PREPARE_PREHEAT);
            break;
          case PREHEAT_MODE:
            if (draw) {
              Draw_Menu_Item(row, ICON_Homing, "Preheat Mode");
              Draw_Option(preheatmode, preheat_modes, row);
            }
            else
              Modify_Option(preheatmode, preheat_modes, 2);
            break;

          #if PREHEAT_COUNT >= 1
            case PREHEAT_1:
              if (draw)
                Draw_Menu_Item(row, ICON_Temperature, PREHEAT_1_LABEL);
              else {
                thermalManager.disable_all_heaters();
                TERN_(HAS_FAN, thermalManager.zero_fan_speeds());
                if (preheatmode == 0 || preheatmode == 1) {
                  TERN_(HAS_HOTEND, thermalManager.setTargetHotend(ui.material_preset[0].hotend_temp, 0));
                  TERN_(HAS_FAN, thermalManager.set_fan_speed(0, ui.material_preset[0].fan_speed));
                }
                #if HAS_HEATED_BED
                  if (preheatmode == 0 || preheatmode == 2) thermalManager.setTargetBed(ui.material_preset[0].bed_temp);
                #endif
              }
              break;
          #endif

          #if PREHEAT_COUNT >= 2
            case PREHEAT_2:
              if (draw)
                Draw_Menu_Item(row, ICON_Temperature, PREHEAT_2_LABEL);
              else {
                thermalManager.disable_all_heaters();
                TERN_(HAS_FAN, thermalManager.zero_fan_speeds());
                if (preheatmode == 0 || preheatmode == 1) {
                  TERN_(HAS_HOTEND, thermalManager.setTargetHotend(ui.material_preset[1].hotend_temp, 0));
                  TERN_(HAS_FAN, thermalManager.set_fan_speed(0, ui.material_preset[1].fan_speed));
                }
                #if HAS_HEATED_BED
                  if (preheatmode == 0 || preheatmode == 2) thermalManager.setTargetBed(ui.material_preset[1].bed_temp);
                #endif
              }
              break;
          #endif

          #if PREHEAT_COUNT >= 3
            case PREHEAT_3:
              if (draw)
                Draw_Menu_Item(row, ICON_Temperature, PREHEAT_3_LABEL);
              else {
                thermalManager.disable_all_heaters();
                TERN_(HAS_FAN, thermalManager.zero_fan_speeds());
                if (preheatmode == 0 || preheatmode == 1) {
                  TERN_(HAS_HOTEND, thermalManager.setTargetHotend(ui.material_preset[2].hotend_temp, 0));
                  TERN_(HAS_FAN, thermalManager.set_fan_speed(0, ui.material_preset[2].fan_speed));
                }
                #if HAS_HEATED_BED
                  if (preheatmode == 0 || preheatmode == 2) thermalManager.setTargetBed(ui.material_preset[2].bed_temp);
                #endif
              }
              break;
          #endif

          #if PREHEAT_COUNT >= 4
            case PREHEAT_4:
              if (draw)
                Draw_Menu_Item(row, ICON_Temperature, PREHEAT_4_LABEL);
              else {
                thermalManager.disable_all_heaters();
                TERN_(HAS_FAN, thermalManager.zero_fan_speeds());
                if (preheatmode == 0 || preheatmode == 1) {
                  TERN_(HAS_HOTEND, thermalManager.setTargetHotend(ui.material_preset[3].hotend_temp, 0));
                  TERN_(HAS_FAN, thermalManager.set_fan_speed(0, ui.material_preset[3].fan_speed));
                }
                #if HAS_HEATED_BED
                  if (preheatmode == 0 || preheatmode == 2) thermalManager.setTargetBed(ui.material_preset[3].bed_temp);
                #endif
              }
              break;
          #endif

          #if PREHEAT_COUNT >= 5
            case PREHEAT_5:
              if (draw)
                Draw_Menu_Item(row, ICON_Temperature, PREHEAT_5_LABEL);
              else {
                thermalManager.disable_all_heaters();
                TERN_(HAS_FAN, thermalManager.zero_fan_speeds());
                if (preheatmode == 0 || preheatmode == 1) {
                  TERN_(HAS_HOTEND, thermalManager.setTargetHotend(ui.material_preset[4].hotend_temp, 0));
                  TERN_(HAS_FAN, thermalManager.set_fan_speed(0, ui.material_preset[4].fan_speed));
                }
                #if HAS_HEATED_BED
                  if (preheatmode == 0 || preheatmode == 2) thermalManager.setTargetBed(ui.material_preset[4].bed_temp);
                #endif
              }
              break;
          #endif
        }
        break;
    #endif

    #if ENABLED(FILAMENT_LOAD_UNLOAD_GCODES)
      case ChangeFilament:

        #define CHANGEFIL_BACK 0
        #define CHANGEFIL_LOAD (CHANGEFIL_BACK + 1)
        #define CHANGEFIL_UNLOAD (CHANGEFIL_LOAD + 1)
        #define CHANGEFIL_CHANGE (CHANGEFIL_UNLOAD + 1)
        #define CHANGEFIL_TOTAL CHANGEFIL_CHANGE

        switch (item) {
          case CHANGEFIL_BACK:
            if (draw)
              Draw_Menu_Item(row, ICON_Back, "Back");
            else
              Draw_Menu(Prepare, PREPARE_CHANGEFIL);
            break;
          case CHANGEFIL_LOAD:
            if (draw)
              Draw_Menu_Item(row, ICON_WriteEEPROM, "Load Filament");
            else {
              if (thermalManager.temp_hotend[0].target < thermalManager.extrude_min_temp)
                Popup_Handler(ETemp);
              else {
                if (thermalManager.temp_hotend[0].celsius < thermalManager.temp_hotend[0].target - 2) {
                  Popup_Handler(Heating);
                  thermalManager.wait_for_hotend(0);
                }
                Popup_Handler(FilLoad);
                gcode.process_subcommands_now_P(PSTR("M701"));
                planner.synchronize();
                Redraw_Menu();
              }
            }
            break;
          case CHANGEFIL_UNLOAD:
            if (draw)
              Draw_Menu_Item(row, ICON_ReadEEPROM, "Unload Filament");
            else {
              if (thermalManager.temp_hotend[0].target < thermalManager.extrude_min_temp) {
                Popup_Handler(ETemp);
              }
              else {
                if (thermalManager.temp_hotend[0].celsius < thermalManager.temp_hotend[0].target - 2) {
                  Popup_Handler(Heating);
                  thermalManager.wait_for_hotend(0);
                }
                Popup_Handler(FilLoad, true);
                gcode.process_subcommands_now_P(PSTR("M702"));
                planner.synchronize();
                Redraw_Menu();
              }
            }
            break;
          case CHANGEFIL_CHANGE:
            if (draw)
              Draw_Menu_Item(row, ICON_ResumeEEPROM, "Change Filament");
            else {
              if (thermalManager.temp_hotend[0].target < thermalManager.extrude_min_temp)
                Popup_Handler(ETemp);
              else {
                if (thermalManager.temp_hotend[0].celsius < thermalManager.temp_hotend[0].target - 2) {
                  Popup_Handler(Heating);
                  thermalManager.wait_for_hotend(0);
                }
                Popup_Handler(FilChange);
                sprintf_P(cmd, PSTR("M600 B1 R%i"), thermalManager.temp_hotend[0].target);
                gcode.process_subcommands_now_P(cmd);
              }
            }
            break;
        }
        break;
    #endif // FILAMENT_LOAD_UNLOAD_GCODES

    case Control:

      #define CONTROL_BACK 0
      #define CONTROL_TEMP (CONTROL_BACK + 1)
      #define CONTROL_MOTION (CONTROL_TEMP + 1)
      #define CONTROL_VISUAL (CONTROL_MOTION + 1)
      #define CONTROL_ADVANCED (CONTROL_VISUAL + 1)
      #define CONTROL_SAVE (CONTROL_ADVANCED + ENABLED(EEPROM_SETTINGS))
      #define CONTROL_RESTORE (CONTROL_SAVE + ENABLED(EEPROM_SETTINGS))
      #define CONTROL_RESET (CONTROL_RESTORE + ENABLED(EEPROM_SETTINGS))
      #define CONTROL_INFO (CONTROL_RESET + 1)
      #define CONTROL_TOTAL CONTROL_INFO

      switch (item) {
        case CONTROL_BACK:
          if (draw)
            Draw_Menu_Item(row, ICON_Back, "Back");
          else
            Draw_Main_Menu(2);
          break;
        case CONTROL_TEMP:
          if (draw)
            Draw_Menu_Item(row, ICON_Temperature, "Temperature", nullptr, true);
          else
            Draw_Menu(TempMenu);
          break;
        case CONTROL_MOTION:
          if (draw)
            Draw_Menu_Item(row, ICON_Motion, "Motion", nullptr, true);
          else
            Draw_Menu(Motion);
          break;
        case CONTROL_VISUAL:
          if (draw)
            Draw_Menu_Item(row, ICON_PrintSize, "Visual", nullptr, true);
          else
            Draw_Menu(Visual);
          break;
        case CONTROL_ADVANCED:
          if (draw)
            Draw_Menu_Item(row, ICON_Version, "Advanced", nullptr, true);
          else
            Draw_Menu(Advanced);
          break;
        #if ENABLED(EEPROM_SETTINGS)
          case CONTROL_SAVE:
            if (draw)
              Draw_Menu_Item(row, ICON_WriteEEPROM, "Store Settings");
            else
              AudioFeedback(settings.save());
            break;
          case CONTROL_RESTORE:
            if (draw)
              Draw_Menu_Item(row, ICON_ReadEEPROM, "Restore Settings");
            else
              AudioFeedback(settings.load());
            break;
          case CONTROL_RESET:
            if (draw)
              Draw_Menu_Item(row, ICON_Temperature, "Reset to Defaults");
            else {
              settings.reset();
              AudioFeedback();
            }
            break;
        #endif
        case CONTROL_INFO:
          if (draw)
            Draw_Menu_Item(row, ICON_Info, "Info");
          else
            Draw_Menu(Info);
          break;
      }
      break;

    case TempMenu:

      #define TEMP_BACK 0
      #define TEMP_HOTEND (TEMP_BACK + ENABLED(HAS_HOTEND))
      #define TEMP_BED (TEMP_HOTEND + ENABLED(HAS_HEATED_BED))
      #define TEMP_FAN (TEMP_BED + ENABLED(HAS_FAN))
      #define TEMP_PID (TEMP_FAN + ANY(HAS_HOTEND, HAS_HEATED_BED))
      #define TEMP_PREHEAT1 (TEMP_PID + (PREHEAT_COUNT >= 1))
      #define TEMP_PREHEAT2 (TEMP_PREHEAT1 + (PREHEAT_COUNT >= 2))
      #define TEMP_PREHEAT3 (TEMP_PREHEAT2 + (PREHEAT_COUNT >= 3))
      #define TEMP_PREHEAT4 (TEMP_PREHEAT3 + (PREHEAT_COUNT >= 4))
      #define TEMP_PREHEAT5 (TEMP_PREHEAT4 + (PREHEAT_COUNT >= 5))
      #define TEMP_TOTAL TEMP_PREHEAT5

      switch (item) {
        case TEMP_BACK:
          if (draw)
            Draw_Menu_Item(row, ICON_Back, "Back");
          else
            Draw_Menu(Control, CONTROL_TEMP);
          break;
        #if HAS_HOTEND
          case TEMP_HOTEND:
            if (draw) {
              Draw_Menu_Item(row, ICON_SetEndTemp, "Hotend");
              Draw_Float(thermalManager.temp_hotend[0].target, row, false, 1);
            }
            else
              Modify_Value(thermalManager.temp_hotend[0].target, MIN_E_TEMP, MAX_E_TEMP, 1);
            break;
        #endif
        #if HAS_HEATED_BED
          case TEMP_BED:
            if (draw) {
              Draw_Menu_Item(row, ICON_SetBedTemp, "Bed");
              Draw_Float(thermalManager.temp_bed.target, row, false, 1);
            }
            else
              Modify_Value(thermalManager.temp_bed.target, MIN_BED_TEMP, MAX_BED_TEMP, 1);
            break;
        #endif
        #if HAS_FAN
          case TEMP_FAN:
            if (draw) {
              Draw_Menu_Item(row, ICON_FanSpeed, "Fan");
              Draw_Float(thermalManager.fan_speed[0], row, false, 1);
            }
            else
              Modify_Value(thermalManager.fan_speed[0], MIN_FAN_SPEED, MAX_FAN_SPEED, 1);
            break;
        #endif
        #if HAS_HOTEND || HAS_HEATED_BED
          case TEMP_PID:
            if (draw)
              Draw_Menu_Item(row, ICON_Step, "PID", nullptr, true);
            else
              Draw_Menu(PID);
            break;
        #endif
        #if PREHEAT_COUNT >= 1
          case TEMP_PREHEAT1:
            if (draw)
              Draw_Menu_Item(row, ICON_Step, PREHEAT_1_LABEL, nullptr, true);
            else
              Draw_Menu(Preheat1);
            break;
        #endif
        #if PREHEAT_COUNT >= 2
          case TEMP_PREHEAT2:
            if (draw)
              Draw_Menu_Item(row, ICON_Step, PREHEAT_2_LABEL, nullptr, true);
            else
              Draw_Menu(Preheat2);
            break;
        #endif
        #if PREHEAT_COUNT >= 3
          case TEMP_PREHEAT3:
            if (draw)
              Draw_Menu_Item(row, ICON_Step, PREHEAT_3_LABEL, nullptr, true);
            else
              Draw_Menu(Preheat3);
            break;
        #endif
        #if PREHEAT_COUNT >= 4
          case TEMP_PREHEAT4:
            if (draw)
              Draw_Menu_Item(row, ICON_Step, PREHEAT_4_LABEL, nullptr, true);
            else
              Draw_Menu(Preheat4);
            break;
        #endif
        #if PREHEAT_COUNT >= 5
          case TEMP_PREHEAT5:
            if (draw)
              Draw_Menu_Item(row, ICON_Step, PREHEAT_5_LABEL, nullptr, true);
            else
              Draw_Menu(Preheat5);
            break;
        #endif
      }
      break;

    #if HAS_HOTEND || HAS_HEATED_BED
      case PID:

        #define PID_BACK 0
        #define PID_HOTEND (PID_BACK + ENABLED(HAS_HOTEND))
        #define PID_BED (PID_HOTEND + ENABLED(HAS_HEATED_BED))
        #define PID_CYCLES (PID_BED + 1)
        #define PID_TOTAL PID_CYCLES

        static uint8_t PID_cycles = 5;

        switch (item) {
          case PID_BACK:
            if (draw)
              Draw_Menu_Item(row, ICON_Back, "Back");
            else
              Draw_Menu(TempMenu, TEMP_PID);
            break;
          #if HAS_HOTEND
            case PID_HOTEND:
              if (draw)
                Draw_Menu_Item(row, ICON_HotendTemp, "Hotend", nullptr, true);
              else
                Draw_Menu(HotendPID);
              break;
          #endif
          #if HAS_HEATED_BED
            case PID_BED:
              if (draw)
                Draw_Menu_Item(row, ICON_BedTemp, "Bed", nullptr, true);
              else
                Draw_Menu(BedPID);
              break;
          #endif
          case PID_CYCLES:
            if (draw) {
              Draw_Menu_Item(row, ICON_FanSpeed, "Cycles");
              Draw_Float(PID_cycles, row, false, 1);
            }
            else
              Modify_Value(PID_cycles, 3, 50, 1);
            break;
        }
        break;
    #endif // HAS_HOTEND || HAS_HEATED_BED

    #if HAS_HOTEND
      case HotendPID:

        #define HOTENDPID_BACK 0
        #define HOTENDPID_TUNE (HOTENDPID_BACK + 1)
        #define HOTENDPID_TEMP (HOTENDPID_TUNE + 1)
        #define HOTENDPID_KP (HOTENDPID_TEMP + 1)
        #define HOTENDPID_KI (HOTENDPID_KP + 1)
        #define HOTENDPID_KD (HOTENDPID_KI + 1)
        #define HOTENDPID_TOTAL HOTENDPID_KD

        static uint16_t PID_e_temp = 180;

        switch (item) {
          case HOTENDPID_BACK:
            if (draw)
              Draw_Menu_Item(row, ICON_Back, "Back");
            else
              Draw_Menu(PID, PID_HOTEND);
            break;
          case HOTENDPID_TUNE:
            if (draw)
              Draw_Menu_Item(row, ICON_HotendTemp, "Autotune");
            else {
              Popup_Handler(PIDWait);
              sprintf_P(cmd, PSTR("M303 E0 C%i S%i U1"), PID_cycles, PID_e_temp);
              gcode.process_subcommands_now_P(cmd);
              planner.synchronize();
              Redraw_Menu();
            }
            break;
          case HOTENDPID_TEMP:
            if (draw) {
              Draw_Menu_Item(row, ICON_Temperature, "Temperature");
              Draw_Float(PID_e_temp, row, false, 1);
            }
            else
              Modify_Value(PID_e_temp, MIN_E_TEMP, MAX_E_TEMP, 1);
            break;
          case HOTENDPID_KP:
            if (draw) {
              Draw_Menu_Item(row, ICON_Version, "Kp Value");
              Draw_Float(thermalManager.temp_hotend[0].pid.Kp, row, false, 100);
            }
            else
              Modify_Value(thermalManager.temp_hotend[0].pid.Kp, 0, 5000, 100, thermalManager.updatePID);
            break;
          case HOTENDPID_KI:
            if (draw) {
              Draw_Menu_Item(row, ICON_Version, "Ki Value");
              Draw_Float(unscalePID_i(thermalManager.temp_hotend[0].pid.Ki), row, false, 100);
            }
            else
              Modify_Value(thermalManager.temp_hotend[0].pid.Ki, 0, 5000, 100, thermalManager.updatePID);
            break;
          case HOTENDPID_KD:
            if (draw) {
              Draw_Menu_Item(row, ICON_Version, "Kd Value");
              Draw_Float(unscalePID_d(thermalManager.temp_hotend[0].pid.Kd), row, false, 100);
            }
            else
              Modify_Value(thermalManager.temp_hotend[0].pid.Kd, 0, 5000, 100, thermalManager.updatePID);
            break;
        }
        break;
    #endif // HAS_HOTEND

    #if HAS_HEATED_BED
      case BedPID:

        #define BEDPID_BACK 0
        #define BEDPID_TUNE (BEDPID_BACK + 1)
        #define BEDPID_TEMP (BEDPID_TUNE + 1)
        #define BEDPID_KP (BEDPID_TEMP + 1)
        #define BEDPID_KI (BEDPID_KP + 1)
        #define BEDPID_KD (BEDPID_KI + 1)
        #define BEDPID_TOTAL BEDPID_KD

        static uint16_t PID_bed_temp = 60;

        switch (item) {
          case BEDPID_BACK:
            if (draw)
              Draw_Menu_Item(row, ICON_Back, "Back");
            else
              Draw_Menu(PID, PID_BED);
            break;
          case BEDPID_TUNE:
            if (draw)
              Draw_Menu_Item(row, ICON_HotendTemp, "Autotune");
            else {
              Popup_Handler(PIDWait);
              sprintf_P(cmd, PSTR("M303 E-1 C%i S%i U1"), PID_cycles, PID_bed_temp);
              gcode.process_subcommands_now_P(cmd);
              planner.synchronize();
              Redraw_Menu();
            }
            break;
          case BEDPID_TEMP:
            if (draw) {
              Draw_Menu_Item(row, ICON_Temperature, "Temperature");
              Draw_Float(PID_bed_temp, row, false, 1);
            }
            else
              Modify_Value(PID_bed_temp, MIN_BED_TEMP, MAX_BED_TEMP, 1);
            break;
          case BEDPID_KP:
            if (draw) {
              Draw_Menu_Item(row, ICON_Version, "Kp Value");
              Draw_Float(thermalManager.temp_bed.pid.Kp, row, false, 100);
            }
            else {
              Modify_Value(thermalManager.temp_bed.pid.Kp, 0, 5000, 100, thermalManager.updatePID);
            }
            break;
          case BEDPID_KI:
            if (draw) {
              Draw_Menu_Item(row, ICON_Version, "Ki Value");
              Draw_Float(unscalePID_i(thermalManager.temp_bed.pid.Ki), row, false, 100);
            }
            else
              Modify_Value(thermalManager.temp_bed.pid.Ki, 0, 5000, 100, thermalManager.updatePID);
            break;
          case BEDPID_KD:
            if (draw) {
              Draw_Menu_Item(row, ICON_Version, "Kd Value");
              Draw_Float(unscalePID_d(thermalManager.temp_bed.pid.Kd), row, false, 100);
            }
            else
              Modify_Value(thermalManager.temp_bed.pid.Kd, 0, 5000, 100, thermalManager.updatePID);
            break;
        }
        break;
    #endif // HAS_HEATED_BED

    #if PREHEAT_COUNT >= 1
      case Preheat1:

        #define PREHEAT1_BACK 0
        #define PREHEAT1_HOTEND (PREHEAT1_BACK + ENABLED(HAS_HOTEND))
        #define PREHEAT1_BED (PREHEAT1_HOTEND + ENABLED(HAS_HEATED_BED))
        #define PREHEAT1_FAN (PREHEAT1_BED + ENABLED(HAS_FAN))
        #define PREHEAT1_TOTAL PREHEAT1_FAN

        switch (item) {
          case PREHEAT1_BACK:
            if (draw)
              Draw_Menu_Item(row, ICON_Back, "Back");
            else
              Draw_Menu(TempMenu, TEMP_PREHEAT1);
            break;
          #if HAS_HOTEND
            case PREHEAT1_HOTEND:
              if (draw) {
                Draw_Menu_Item(row, ICON_SetEndTemp, "Hotend");
                Draw_Float(ui.material_preset[0].hotend_temp, row, false, 1);
              }
              else
                Modify_Value(ui.material_preset[0].hotend_temp, MIN_E_TEMP, MAX_E_TEMP, 1);
              break;
          #endif
          #if HAS_HEATED_BED
            case PREHEAT1_BED:
              if (draw) {
                Draw_Menu_Item(row, ICON_SetBedTemp, "Bed");
                Draw_Float(ui.material_preset[0].bed_temp, row, false, 1);
              }
              else
                Modify_Value(ui.material_preset[0].bed_temp, MIN_BED_TEMP, MAX_BED_TEMP, 1);
              break;
          #endif
          #if HAS_FAN
            case PREHEAT1_FAN:
              if (draw) {
                Draw_Menu_Item(row, ICON_FanSpeed, "Fan");
                Draw_Float(ui.material_preset[0].fan_speed, row, false, 1);
              }
              else
                Modify_Value(ui.material_preset[0].fan_speed, MIN_FAN_SPEED, MAX_FAN_SPEED, 1);
              break;
          #endif
        }
        break;
    #endif // PREHEAT_COUNT >= 1

    #if PREHEAT_COUNT >= 2
      case Preheat2:

        #define PREHEAT2_BACK 0
        #define PREHEAT2_HOTEND (PREHEAT2_BACK + ENABLED(HAS_HOTEND))
        #define PREHEAT2_BED (PREHEAT2_HOTEND + ENABLED(HAS_HEATED_BED))
        #define PREHEAT2_FAN (PREHEAT2_BED + ENABLED(HAS_FAN))
        #define PREHEAT2_TOTAL PREHEAT2_FAN

        switch (item) {
          case PREHEAT2_BACK:
            if (draw)
              Draw_Menu_Item(row, ICON_Back, "Back");
            else
              Draw_Menu(TempMenu, TEMP_PREHEAT2);
            break;
          #if HAS_HOTEND
            case PREHEAT2_HOTEND:
              if (draw) {
                Draw_Menu_Item(row, ICON_SetEndTemp, "Hotend");
                Draw_Float(ui.material_preset[1].hotend_temp, row, false, 1);
              }
              else
                Modify_Value(ui.material_preset[1].hotend_temp, MIN_E_TEMP, MAX_E_TEMP, 1);
              break;
          #endif
          #if HAS_HEATED_BED
            case PREHEAT2_BED:
              if (draw) {
                Draw_Menu_Item(row, ICON_SetBedTemp, "Bed");
                Draw_Float(ui.material_preset[1].bed_temp, row, false, 1);
              }
              else
                Modify_Value(ui.material_preset[1].bed_temp, MIN_BED_TEMP, MAX_BED_TEMP, 1);
              break;
          #endif
          #if HAS_FAN
            case PREHEAT2_FAN:
              if (draw) {
                Draw_Menu_Item(row, ICON_FanSpeed, "Fan");
                Draw_Float(ui.material_preset[1].fan_speed, row, false, 1);
              }
              else
                Modify_Value(ui.material_preset[1].fan_speed, MIN_FAN_SPEED, MAX_FAN_SPEED, 1);
              break;
          #endif
        }
        break;
    #endif // PREHEAT_COUNT >= 2

    #if PREHEAT_COUNT >= 3
      case Preheat3:

        #define PREHEAT3_BACK 0
        #define PREHEAT3_HOTEND (PREHEAT3_BACK + ENABLED(HAS_HOTEND))
        #define PREHEAT3_BED (PREHEAT3_HOTEND + ENABLED(HAS_HEATED_BED))
        #define PREHEAT3_FAN (PREHEAT3_BED + ENABLED(HAS_FAN))
        #define PREHEAT3_TOTAL PREHEAT3_FAN

        switch (item) {
          case PREHEAT3_BACK:
            if (draw)
              Draw_Menu_Item(row, ICON_Back, "Back");
            else
              Draw_Menu(TempMenu, TEMP_PREHEAT3);
            break;
          #if HAS_HOTEND
            case PREHEAT3_HOTEND:
              if (draw) {
                Draw_Menu_Item(row, ICON_SetEndTemp, "Hotend");
                Draw_Float(ui.material_preset[2].hotend_temp, row, false, 1);
              }
              else
                Modify_Value(ui.material_preset[2].hotend_temp, MIN_E_TEMP, MAX_E_TEMP, 1);
              break;
          #endif
          #if HAS_HEATED_BED
            case PREHEAT3_BED:
              if (draw) {
                Draw_Menu_Item(row, ICON_SetBedTemp, "Bed");
                Draw_Float(ui.material_preset[2].bed_temp, row, false, 1);
              }
              else
                Modify_Value(ui.material_preset[2].bed_temp, MIN_BED_TEMP, MAX_BED_TEMP, 1);
              break;
          #endif
          #if HAS_FAN
            case PREHEAT3_FAN:
              if (draw) {
                Draw_Menu_Item(row, ICON_FanSpeed, "Fan");
                Draw_Float(ui.material_preset[2].fan_speed, row, false, 1);
              }
              else
                Modify_Value(ui.material_preset[2].fan_speed, MIN_FAN_SPEED, MAX_FAN_SPEED, 1);
              break;
          #endif
        }
        break;
    #endif // PREHEAT_COUNT >= 3

    #if PREHEAT_COUNT >= 4
      case Preheat4:

        #define PREHEAT4_BACK 0
        #define PREHEAT4_HOTEND (PREHEAT4_BACK + ENABLED(HAS_HOTEND))
        #define PREHEAT4_BED (PREHEAT4_HOTEND + ENABLED(HAS_HEATED_BED))
        #define PREHEAT4_FAN (PREHEAT4_BED + ENABLED(HAS_FAN))
        #define PREHEAT4_TOTAL PREHEAT4_FAN

        switch (item) {
          case PREHEAT4_BACK:
            if (draw)
              Draw_Menu_Item(row, ICON_Back, "Back");
            else
              Draw_Menu(TempMenu, TEMP_PREHEAT4);
            break;
          #if HAS_HOTEND
            case PREHEAT4_HOTEND:
              if (draw) {
                Draw_Menu_Item(row, ICON_SetEndTemp, "Hotend");
                Draw_Float(ui.material_preset[3].hotend_temp, row, false, 1);
              }
              else
                Modify_Value(ui.material_preset[3].hotend_temp, MIN_E_TEMP, MAX_E_TEMP, 1);
              break;
          #endif
          #if HAS_HEATED_BED
            case PREHEAT4_BED:
              if (draw) {
                Draw_Menu_Item(row, ICON_SetBedTemp, "Bed");
                Draw_Float(ui.material_preset[3].bed_temp, row, false, 1);
              }
              else
                Modify_Value(ui.material_preset[3].bed_temp, MIN_BED_TEMP, MAX_BED_TEMP, 1);
              break;
          #endif
          #if HAS_FAN
            case PREHEAT4_FAN:
              if (draw) {
                Draw_Menu_Item(row, ICON_FanSpeed, "Fan");
                Draw_Float(ui.material_preset[3].fan_speed, row, false, 1);
              }
              else
                Modify_Value(ui.material_preset[3].fan_speed, MIN_FAN_SPEED, MAX_FAN_SPEED, 1);
              break;
          #endif
        }
        break;
    #endif // PREHEAT_COUNT >= 4

    #if PREHEAT_COUNT >= 5
      case Preheat5:

        #define PREHEAT5_BACK 0
        #define PREHEAT5_HOTEND (PREHEAT5_BACK + ENABLED(HAS_HOTEND))
        #define PREHEAT5_BED (PREHEAT5_HOTEND + ENABLED(HAS_HEATED_BED))
        #define PREHEAT5_FAN (PREHEAT5_BED + ENABLED(HAS_FAN))
        #define PREHEAT5_TOTAL PREHEAT5_FAN

        switch (item) {
          case PREHEAT5_BACK:
            if (draw)
              Draw_Menu_Item(row, ICON_Back, "Back");
            else
              Draw_Menu(TempMenu, TEMP_PREHEAT5);
            break;
          #if HAS_HOTEND
            case PREHEAT5_HOTEND:
              if (draw) {
                Draw_Menu_Item(row, ICON_SetEndTemp, "Hotend");
                Draw_Float(ui.material_preset[4].hotend_temp, row, false, 1);
              }
              else
                Modify_Value(ui.material_preset[4].hotend_temp, MIN_E_TEMP, MAX_E_TEMP, 1);
              break;
          #endif
          #if HAS_HEATED_BED
            case PREHEAT5_BED:
              if (draw) {
                Draw_Menu_Item(row, ICON_SetBedTemp, "Bed");
                Draw_Float(ui.material_preset[4].bed_temp, row, false, 1);
              }
              else
                Modify_Value(ui.material_preset[4].bed_temp, MIN_BED_TEMP, MAX_BED_TEMP, 1);
              break;
          #endif
          #if HAS_FAN
            case PREHEAT5_FAN:
              if (draw) {
                Draw_Menu_Item(row, ICON_FanSpeed, "Fan");
                Draw_Float(ui.material_preset[4].fan_speed, row, false, 1);
              }
              else
                Modify_Value(ui.material_preset[4].fan_speed, MIN_FAN_SPEED, MAX_FAN_SPEED, 1);
              break;
          #endif
        }
        break;
    #endif // PREHEAT_COUNT >= 5

    case Motion:

      #define MOTION_BACK 0
      #define MOTION_HOMEOFFSETS (MOTION_BACK + 1)
      #define MOTION_SPEED (MOTION_HOMEOFFSETS + 1)
      #define MOTION_ACCEL (MOTION_SPEED + 1)
      #define MOTION_JERK (MOTION_ACCEL + ENABLED(HAS_CLASSIC_JERK))
      #define MOTION_STEPS (MOTION_JERK + 1)
      #define MOTION_FLOW (MOTION_STEPS + ENABLED(HAS_HOTEND))
      #define MOTION_TOTAL MOTION_FLOW

      switch (item) {
        case MOTION_BACK:
          if (draw)
            Draw_Menu_Item(row, ICON_Back, "Back");
          else
            Draw_Menu(Control, CONTROL_MOTION);
          break;
        case MOTION_HOMEOFFSETS:
          if (draw)
            Draw_Menu_Item(row, ICON_SetHome, "Home Offsets", nullptr, true);
          else
            Draw_Menu(HomeOffsets);
          break;
        case MOTION_SPEED:
          if (draw)
            Draw_Menu_Item(row, ICON_MaxSpeed, "Max Speed", nullptr, true);
          else
            Draw_Menu(MaxSpeed);
          break;
        case MOTION_ACCEL:
          if (draw)
            Draw_Menu_Item(row, ICON_MaxAccelerated, "Max Acceleration", nullptr, true);
          else
            Draw_Menu(MaxAcceleration);
          break;
        #if HAS_CLASSIC_JERK
          case MOTION_JERK:
            if (draw)
              Draw_Menu_Item(row, ICON_MaxJerk, "Max Jerk", nullptr, true);
            else
              Draw_Menu(MaxJerk);
            break;
        #endif
        case MOTION_STEPS:
          if (draw)
            Draw_Menu_Item(row, ICON_Step, "Steps/mm", nullptr, true);
          else
            Draw_Menu(Steps);
          break;
        #if HAS_HOTEND
          case MOTION_FLOW:
            if (draw) {
              Draw_Menu_Item(row, ICON_Speed, "Flow Rate");
              Draw_Float(planner.flow_percentage[0], row, false, 1);
            }
            else
              Modify_Value(planner.flow_percentage[0], MIN_FLOW_RATE, MAX_FLOW_RATE, 1);
            break;
        #endif
      }
      break;

    case HomeOffsets:

      #define HOMEOFFSETS_BACK 0
      #define HOMEOFFSETS_XOFFSET (HOMEOFFSETS_BACK + 1)
      #define HOMEOFFSETS_YOFFSET (HOMEOFFSETS_XOFFSET + 1)
      #define HOMEOFFSETS_TOTAL HOMEOFFSETS_YOFFSET

      switch (item) {
        case HOMEOFFSETS_BACK:
          if (draw)
            Draw_Menu_Item(row, ICON_Back, "Back");
          else
            Draw_Menu(Motion, MOTION_HOMEOFFSETS);
          break;
        case HOMEOFFSETS_XOFFSET:
          if (draw) {
            Draw_Menu_Item(row, ICON_StepX, "X Offset");
            Draw_Float(home_offset.x, row, false, 100);
          }
          else
            Modify_Value(home_offset.x, -MAX_XY_OFFSET, MAX_XY_OFFSET, 100);
          break;
        case HOMEOFFSETS_YOFFSET:
          if (draw) {
            Draw_Menu_Item(row, ICON_StepY, "Y Offset");
            Draw_Float(home_offset.y, row, false, 100);
          }
          else
            Modify_Value(home_offset.y, -MAX_XY_OFFSET, MAX_XY_OFFSET, 100);
          break;
      }
      break;
    case MaxSpeed:

      #define SPEED_BACK 0
      #define SPEED_X (SPEED_BACK + 1)
      #define SPEED_Y (SPEED_X + 1)
      #define SPEED_Z (SPEED_Y + 1)
      #define SPEED_E (SPEED_Z + ENABLED(HAS_HOTEND))
      #define SPEED_TOTAL SPEED_E

      switch (item) {
        case SPEED_BACK:
          if (draw)
            Draw_Menu_Item(row, ICON_Back, "Back");
          else
            Draw_Menu(Motion, MOTION_SPEED);
          break;
        case SPEED_X:
          if (draw) {
            Draw_Menu_Item(row, ICON_MaxSpeedX, "X Axis");
            Draw_Float(planner.settings.max_feedrate_mm_s[X_AXIS], row, false, 1);
          }
          else
            Modify_Value(planner.settings.max_feedrate_mm_s[X_AXIS], 0, default_max_feedrate[X_AXIS] * 2, 1);
          break;

        #if HAS_Y_AXIS
          case SPEED_Y:
            if (draw) {
              Draw_Menu_Item(row, ICON_MaxSpeedY, "Y Axis");
              Draw_Float(planner.settings.max_feedrate_mm_s[Y_AXIS], row, false, 1);
            }
            else
              Modify_Value(planner.settings.max_feedrate_mm_s[Y_AXIS], 0, default_max_feedrate[Y_AXIS] * 2, 1);
            break;
        #endif

        #if HAS_Z_AXIS
          case SPEED_Z:
            if (draw) {
              Draw_Menu_Item(row, ICON_MaxSpeedZ, "Z Axis");
              Draw_Float(planner.settings.max_feedrate_mm_s[Z_AXIS], row, false, 1);
            }
            else
              Modify_Value(planner.settings.max_feedrate_mm_s[Z_AXIS], 0, default_max_feedrate[Z_AXIS] * 2, 1);
            break;
        #endif

        #if HAS_HOTEND
          case SPEED_E:
            if (draw) {
              Draw_Menu_Item(row, ICON_MaxSpeedE, "Extruder");
              Draw_Float(planner.settings.max_feedrate_mm_s[E_AXIS], row, false, 1);
            }
            else
              Modify_Value(planner.settings.max_feedrate_mm_s[E_AXIS], 0, default_max_feedrate[E_AXIS] * 2, 1);
            break;
        #endif
      }
      break;

    case MaxAcceleration:

      #define ACCEL_BACK 0
      #define ACCEL_X (ACCEL_BACK + 1)
      #define ACCEL_Y (ACCEL_X + 1)
      #define ACCEL_Z (ACCEL_Y + 1)
      #define ACCEL_E (ACCEL_Z + ENABLED(HAS_HOTEND))
      #define ACCEL_TOTAL ACCEL_E

      switch (item) {
        case ACCEL_BACK:
          if (draw)
            Draw_Menu_Item(row, ICON_Back, "Back");
          else
            Draw_Menu(Motion, MOTION_ACCEL);
          break;
        case ACCEL_X:
          if (draw) {
            Draw_Menu_Item(row, ICON_MaxAccX, "X Axis");
            Draw_Float(planner.settings.max_acceleration_mm_per_s2[X_AXIS], row, false, 1);
          }
          else
            Modify_Value(planner.settings.max_acceleration_mm_per_s2[X_AXIS], 0, default_max_acceleration[X_AXIS] * 2, 1);
          break;
        case ACCEL_Y:
          if (draw) {
            Draw_Menu_Item(row, ICON_MaxAccY, "Y Axis");
            Draw_Float(planner.settings.max_acceleration_mm_per_s2[Y_AXIS], row, false, 1);
          }
          else
            Modify_Value(planner.settings.max_acceleration_mm_per_s2[Y_AXIS], 0, default_max_acceleration[Y_AXIS] * 2, 1);
          break;
        case ACCEL_Z:
          if (draw) {
            Draw_Menu_Item(row, ICON_MaxAccZ, "Z Axis");
            Draw_Float(planner.settings.max_acceleration_mm_per_s2[Z_AXIS], row, false, 1);
          }
          else
            Modify_Value(planner.settings.max_acceleration_mm_per_s2[Z_AXIS], 0, default_max_acceleration[Z_AXIS] * 2, 1);
          break;
        #if HAS_HOTEND
          case ACCEL_E:
            if (draw) {
              Draw_Menu_Item(row, ICON_MaxAccE, "Extruder");
              Draw_Float(planner.settings.max_acceleration_mm_per_s2[E_AXIS], row, false, 1);
            }
            else
              Modify_Value(planner.settings.max_acceleration_mm_per_s2[E_AXIS], 0, default_max_acceleration[E_AXIS] * 2, 1);
            break;
        #endif
      }
      break;
    #if HAS_CLASSIC_JERK
      case MaxJerk:

        #define JERK_BACK 0
        #define JERK_X (JERK_BACK + 1)
        #define JERK_Y (JERK_X + 1)
        #define JERK_Z (JERK_Y + 1)
        #define JERK_E (JERK_Z + ENABLED(HAS_HOTEND))
        #define JERK_TOTAL JERK_E

        switch (item) {
          case JERK_BACK:
            if (draw)
              Draw_Menu_Item(row, ICON_Back, "Back");
            else
              Draw_Menu(Motion, MOTION_JERK);
            break;
          case JERK_X:
            if (draw) {
              Draw_Menu_Item(row, ICON_MaxSpeedJerkX, "X Axis");
              Draw_Float(planner.max_jerk[X_AXIS], row, false, 10);
            }
            else
              Modify_Value(planner.max_jerk[X_AXIS], 0, default_max_jerk[X_AXIS] * 2, 10);
            break;
          case JERK_Y:
            if (draw) {
              Draw_Menu_Item(row, ICON_MaxSpeedJerkY, "Y Axis");
              Draw_Float(planner.max_jerk[Y_AXIS], row, false, 10);
            }
            else
              Modify_Value(planner.max_jerk[Y_AXIS], 0, default_max_jerk[Y_AXIS] * 2, 10);
            break;
          case JERK_Z:
            if (draw) {
              Draw_Menu_Item(row, ICON_MaxSpeedJerkZ, "Z Axis");
              Draw_Float(planner.max_jerk[Z_AXIS], row, false, 10);
            }
            else
              Modify_Value(planner.max_jerk[Z_AXIS], 0, default_max_jerk[Z_AXIS] * 2, 10);
            break;
          #if HAS_HOTEND
            case JERK_E:
              if (draw) {
                Draw_Menu_Item(row, ICON_MaxSpeedJerkE, "Extruder");
                Draw_Float(planner.max_jerk[E_AXIS], row, false, 10);
              }
              else
                Modify_Value(planner.max_jerk[E_AXIS], 0, default_max_jerk[E_AXIS] * 2, 10);
              break;
          #endif
        }
        break;
    #endif
    case Steps:

      #define STEPS_BACK 0
      #define STEPS_X (STEPS_BACK + 1)
      #define STEPS_Y (STEPS_X + 1)
      #define STEPS_Z (STEPS_Y + 1)
      #define STEPS_E (STEPS_Z + ENABLED(HAS_HOTEND))
      #define STEPS_TOTAL STEPS_E

      switch (item) {
        case STEPS_BACK:
          if (draw)
            Draw_Menu_Item(row, ICON_Back, "Back");
          else
            Draw_Menu(Motion, MOTION_STEPS);
          break;
        case STEPS_X:
          if (draw) {
            Draw_Menu_Item(row, ICON_StepX, "X Axis");
            Draw_Float(planner.settings.axis_steps_per_mm[X_AXIS], row, false, 10);
          }
          else
            Modify_Value(planner.settings.axis_steps_per_mm[X_AXIS], 0, default_steps[X_AXIS] * 2, 10);
          break;
        case STEPS_Y:
          if (draw) {
            Draw_Menu_Item(row, ICON_StepY, "Y Axis");
            Draw_Float(planner.settings.axis_steps_per_mm[Y_AXIS], row, false, 10);
          }
          else
            Modify_Value(planner.settings.axis_steps_per_mm[Y_AXIS], 0, default_steps[Y_AXIS] * 2, 10);
          break;
        case STEPS_Z:
          if (draw) {
            Draw_Menu_Item(row, ICON_StepZ, "Z Axis");
            Draw_Float(planner.settings.axis_steps_per_mm[Z_AXIS], row, false, 10);
          }
          else
            Modify_Value(planner.settings.axis_steps_per_mm[Z_AXIS], 0, default_steps[Z_AXIS] * 2, 10);
          break;
        #if HAS_HOTEND
          case STEPS_E:
            if (draw) {
              Draw_Menu_Item(row, ICON_StepE, "Extruder");
              Draw_Float(planner.settings.axis_steps_per_mm[E_AXIS], row, false, 10);
            }
            else
              Modify_Value(planner.settings.axis_steps_per_mm[E_AXIS], 0, 1000, 10);
            break;
        #endif
      }
      break;

    case Visual:

      #define VISUAL_BACK 0
      #define VISUAL_BACKLIGHT (VISUAL_BACK + 1)
      #define VISUAL_BRIGHTNESS (VISUAL_BACKLIGHT + 1)
      #define VISUAL_TIME_FORMAT (VISUAL_BRIGHTNESS + 1)
      #define VISUAL_COLOR_THEMES (VISUAL_TIME_FORMAT + 1)
      #define VISUAL_TOTAL VISUAL_COLOR_THEMES

      switch (item) {
        case VISUAL_BACK:
          if (draw)
            Draw_Menu_Item(row, ICON_Back, "Back");
          else
            Draw_Menu(Control, CONTROL_VISUAL);
          break;
        case VISUAL_BACKLIGHT:
          if (draw)
            Draw_Menu_Item(row, ICON_Brightness, "Display Off");
          else
            ui.set_brightness(0);
          break;
        case VISUAL_BRIGHTNESS:
          if (draw) {
            Draw_Menu_Item(row, ICON_Brightness, "LCD Brightness");
            Draw_Float(ui.brightness, row, false, 1);
          }
          else
            Modify_Value(ui.brightness, MIN_LCD_BRIGHTNESS, MAX_LCD_BRIGHTNESS, 1, ui.refresh_brightness);
          break;
        case VISUAL_TIME_FORMAT:
          if (draw) {
            Draw_Menu_Item(row, ICON_PrintTime, "Progress as __h__m");
            Draw_Checkbox(row, eeprom_settings.time_format_textual);
          }
          else {
            eeprom_settings.time_format_textual = !eeprom_settings.time_format_textual;
            Draw_Checkbox(row, eeprom_settings.time_format_textual);
          }
          break;
        case VISUAL_COLOR_THEMES:
          if (draw)
            Draw_Menu_Item(row, ICON_MaxSpeed, "UI Color Settings", nullptr, true);
          else
            Draw_Menu(ColorSettings);
        break;
      }
      break;

    case ColorSettings:

      #define COLORSETTINGS_BACK 0
      #define COLORSETTINGS_CURSOR (COLORSETTINGS_BACK + 1)
      #define COLORSETTINGS_SPLIT_LINE (COLORSETTINGS_CURSOR + 1)
      #define COLORSETTINGS_MENU_TOP_TXT (COLORSETTINGS_SPLIT_LINE + 1)
      #define COLORSETTINGS_MENU_TOP_BG (COLORSETTINGS_MENU_TOP_TXT + 1)
      #define COLORSETTINGS_HIGHLIGHT_BORDER (COLORSETTINGS_MENU_TOP_BG + 1)
      #define COLORSETTINGS_PROGRESS_PERCENT (COLORSETTINGS_HIGHLIGHT_BORDER + 1)
      #define COLORSETTINGS_PROGRESS_TIME (COLORSETTINGS_PROGRESS_PERCENT + 1)
      #define COLORSETTINGS_PROGRESS_STATUS_BAR (COLORSETTINGS_PROGRESS_TIME + 1)
      #define COLORSETTINGS_PROGRESS_STATUS_AREA (COLORSETTINGS_PROGRESS_STATUS_BAR + 1)
      #define COLORSETTINGS_PROGRESS_COORDINATES (COLORSETTINGS_PROGRESS_STATUS_AREA + 1)
      #define COLORSETTINGS_PROGRESS_COORDINATES_LINE (COLORSETTINGS_PROGRESS_COORDINATES + 1)
      #define COLORSETTINGS_TOTAL COLORSETTINGS_PROGRESS_COORDINATES_LINE

      switch (item) {
        case COLORSETTINGS_BACK:
          if (draw)
            Draw_Menu_Item(row, ICON_Back, "Back");
          else
            Draw_Menu(Visual, VISUAL_COLOR_THEMES);
          break;
        case COLORSETTINGS_CURSOR:
          if (draw) {
            Draw_Menu_Item(row, ICON_MaxSpeed, "Cursor");
            Draw_Option(eeprom_settings.cursor_color, color_names, row, false, true);
          }
          else
            Modify_Option(eeprom_settings.cursor_color, color_names, Custom_Colors);
          break;
        case COLORSETTINGS_SPLIT_LINE:
          if (draw) {
            Draw_Menu_Item(row, ICON_MaxSpeed, "Menu Split Line");
            Draw_Option(eeprom_settings.menu_split_line, color_names, row, false, true);
          }
          else
            Modify_Option(eeprom_settings.menu_split_line, color_names, Custom_Colors);
          break;
        case COLORSETTINGS_MENU_TOP_TXT:
          if (draw) {
            Draw_Menu_Item(row, ICON_MaxSpeed, "Menu Header Text");
            Draw_Option(eeprom_settings.menu_top_txt, color_names, row, false, true);
          }
          else
            Modify_Option(eeprom_settings.menu_top_txt, color_names, Custom_Colors);
          break;
        case COLORSETTINGS_MENU_TOP_BG:
          if (draw) {
            Draw_Menu_Item(row, ICON_MaxSpeed, "Menu Header Bg");
            Draw_Option(eeprom_settings.menu_top_bg, color_names, row, false, true);
          }
          else
            Modify_Option(eeprom_settings.menu_top_bg, color_names, Custom_Colors);
          break;
        case COLORSETTINGS_HIGHLIGHT_BORDER:
          if (draw) {
            Draw_Menu_Item(row, ICON_MaxSpeed, "Highlight Box");
            Draw_Option(eeprom_settings.highlight_box, color_names, row, false, true);
          }
          else
            Modify_Option(eeprom_settings.highlight_box, color_names, Custom_Colors);
          break;
        case COLORSETTINGS_PROGRESS_PERCENT:
          if (draw) {
            Draw_Menu_Item(row, ICON_MaxSpeed, "Progress Percent");
            Draw_Option(eeprom_settings.progress_percent, color_names, row, false, true);
          }
          else
            Modify_Option(eeprom_settings.progress_percent, color_names, Custom_Colors);
          break;
        case COLORSETTINGS_PROGRESS_TIME:
          if (draw) {
            Draw_Menu_Item(row, ICON_MaxSpeed, "Progress Time");
            Draw_Option(eeprom_settings.progress_time, color_names, row, false, true);
          }
          else
            Modify_Option(eeprom_settings.progress_time, color_names, Custom_Colors);
          break;
        case COLORSETTINGS_PROGRESS_STATUS_BAR:
          if (draw) {
            Draw_Menu_Item(row, ICON_MaxSpeed, "Status Bar Text");
            Draw_Option(eeprom_settings.status_bar_text, color_names, row, false, true);
          }
          else
            Modify_Option(eeprom_settings.status_bar_text, color_names, Custom_Colors);
          break;
        case COLORSETTINGS_PROGRESS_STATUS_AREA:
          if (draw) {
            Draw_Menu_Item(row, ICON_MaxSpeed, "Status Area Text");
            Draw_Option(eeprom_settings.status_area_text, color_names, row, false, true);
          }
          else
            Modify_Option(eeprom_settings.status_area_text, color_names, Custom_Colors);
          break;
        case COLORSETTINGS_PROGRESS_COORDINATES:
          if (draw) {
            Draw_Menu_Item(row, ICON_MaxSpeed, "Coordinates Text");
            Draw_Option(eeprom_settings.coordinates_text, color_names, row, false, true);
          }
          else
            Modify_Option(eeprom_settings.coordinates_text, color_names, Custom_Colors);
          break;
        case COLORSETTINGS_PROGRESS_COORDINATES_LINE:
          if (draw) {
            Draw_Menu_Item(row, ICON_MaxSpeed, "Coordinates Line");
            Draw_Option(eeprom_settings.coordinates_split_line, color_names, row, false, true);
          }
          else
            Modify_Option(eeprom_settings.coordinates_split_line, color_names, Custom_Colors);
          break;
      } // switch (item)
      break;

    case Advanced:

      #define ADVANCED_BACK 0
      #define ADVANCED_BEEPER (ADVANCED_BACK + 1)
      #define ADVANCED_PROBE (ADVANCED_BEEPER + ENABLED(HAS_BED_PROBE))
      #define ADVANCED_CORNER (ADVANCED_PROBE + 1)
      #define ADVANCED_LA (ADVANCED_CORNER + ENABLED(LIN_ADVANCE))
      #define ADVANCED_LOAD (ADVANCED_LA + ENABLED(ADVANCED_PAUSE_FEATURE))
      #define ADVANCED_UNLOAD (ADVANCED_LOAD + ENABLED(ADVANCED_PAUSE_FEATURE))
      #define ADVANCED_COLD_EXTRUDE  (ADVANCED_UNLOAD + ENABLED(PREVENT_COLD_EXTRUSION))
      #define ADVANCED_FILSENSORENABLED (ADVANCED_COLD_EXTRUDE + ENABLED(FILAMENT_RUNOUT_SENSOR))
      #define ADVANCED_FILSENSORDISTANCE (ADVANCED_FILSENSORENABLED + ENABLED(HAS_FILAMENT_RUNOUT_DISTANCE))
      #define ADVANCED_POWER_LOSS (ADVANCED_FILSENSORDISTANCE + ENABLED(POWER_LOSS_RECOVERY))
      #define ADVANCED_TOTAL ADVANCED_POWER_LOSS

      switch (item) {
        case ADVANCED_BACK:
          if (draw)
            Draw_Menu_Item(row, ICON_Back, "Back");
          else
            Draw_Menu(Control, CONTROL_ADVANCED);
          break;

        case ADVANCED_BEEPER:
          if (draw) {
            Draw_Menu_Item(row, ICON_Version, "LCD Beeper");
            Draw_Checkbox(row, eeprom_settings.beeperenable);
          }
          else {
            eeprom_settings.beeperenable = !eeprom_settings.beeperenable;
            Draw_Checkbox(row, eeprom_settings.beeperenable);
          }
          break;

        #if HAS_BED_PROBE
          case ADVANCED_PROBE:
            if (draw)
              Draw_Menu_Item(row, ICON_StepX, "Probe", nullptr, true);
            else
              Draw_Menu(ProbeMenu);
            break;
        #endif

        case ADVANCED_CORNER:
          if (draw) {
            Draw_Menu_Item(row, ICON_MaxAccelerated, "Bed Screw Inset");
            Draw_Float(corner_pos, row, false, 10);
          }
          else
            Modify_Value(corner_pos, 1, 100, 10);
          break;

        #if ENABLED(LIN_ADVANCE)
          case ADVANCED_LA:
            if (draw) {
              Draw_Menu_Item(row, ICON_MaxAccelerated, "Lin Advance Kp");
              Draw_Float(planner.extruder_advance_K[0], row, false, 100);
            }
            else
              Modify_Value(planner.extruder_advance_K[0], 0, 10, 100);
            break;
        #endif

        #if ENABLED(ADVANCED_PAUSE_FEATURE)
          case ADVANCED_LOAD:
            if (draw) {
              Draw_Menu_Item(row, ICON_WriteEEPROM, "Load Length");
              Draw_Float(fc_settings[0].load_length, row, false, 1);
            }
            else
              Modify_Value(fc_settings[0].load_length, 0, EXTRUDE_MAXLENGTH, 1);
            break;
          case ADVANCED_UNLOAD:
            if (draw) {
              Draw_Menu_Item(row, ICON_ReadEEPROM, "Unload Length");
              Draw_Float(fc_settings[0].unload_length, row, false, 1);
            }
            else
              Modify_Value(fc_settings[0].unload_length, 0, EXTRUDE_MAXLENGTH, 1);
            break;
        #endif // ADVANCED_PAUSE_FEATURE

        #if ENABLED(PREVENT_COLD_EXTRUSION)
          case ADVANCED_COLD_EXTRUDE:
            if (draw) {
              Draw_Menu_Item(row, ICON_Cool, "Min Extrusion T");
              Draw_Float(thermalManager.extrude_min_temp, row, false, 1);
            }
            else {
              Modify_Value(thermalManager.extrude_min_temp, 0, MAX_E_TEMP, 1);
              thermalManager.allow_cold_extrude = (thermalManager.extrude_min_temp == 0);
            }
            break;
        #endif

        #if ENABLED(FILAMENT_RUNOUT_SENSOR)
          case ADVANCED_FILSENSORENABLED:
            if (draw) {
              Draw_Menu_Item(row, ICON_Extruder, "Filament Sensor");
              Draw_Checkbox(row, runout.enabled);
            }
            else {
              runout.enabled = !runout.enabled;
              Draw_Checkbox(row, runout.enabled);
            }
            break;

          #if ENABLED(HAS_FILAMENT_RUNOUT_DISTANCE)
            case ADVANCED_FILSENSORDISTANCE:
              if (draw) {
                Draw_Menu_Item(row, ICON_MaxAccE, "Runout Distance");
                Draw_Float(runout.runout_distance(), row, false, 10);
              }
              else
                Modify_Value(runout.runout_distance(), 0, 999, 10);
              break;
          #endif
        #endif // FILAMENT_RUNOUT_SENSOR

        #if ENABLED(POWER_LOSS_RECOVERY)
          case ADVANCED_POWER_LOSS:
            if (draw) {
              Draw_Menu_Item(row, ICON_Motion, "Power-loss recovery");
              Draw_Checkbox(row, recovery.enabled);
            }
            else {
              recovery.enable(!recovery.enabled);
              Draw_Checkbox(row, recovery.enabled);
            }
            break;
        #endif
      }
      break;

    #if HAS_BED_PROBE
      case ProbeMenu:

        #define PROBE_BACK 0
        #define PROBE_XOFFSET (PROBE_BACK + 1)
        #define PROBE_YOFFSET (PROBE_XOFFSET + 1)
        #define PROBE_TEST (PROBE_YOFFSET + 1)
        #define PROBE_TEST_COUNT (PROBE_TEST + 1)
        #define PROBE_TOTAL PROBE_TEST_COUNT

        static uint8_t testcount = 4;

        switch (item) {
          case PROBE_BACK:
            if (draw)
              Draw_Menu_Item(row, ICON_Back, "Back");
            else
              Draw_Menu(Advanced, ADVANCED_PROBE);
            break;

            case PROBE_XOFFSET:
              if (draw) {
                Draw_Menu_Item(row, ICON_StepX, "Probe X Offset");
                Draw_Float(probe.offset.x, row, false, 10);
              }
              else
                Modify_Value(probe.offset.x, -MAX_XY_OFFSET, MAX_XY_OFFSET, 10);
              break;
            case PROBE_YOFFSET:
              if (draw) {
                Draw_Menu_Item(row, ICON_StepY, "Probe Y Offset");
                Draw_Float(probe.offset.y, row, false, 10);
              }
              else
                Modify_Value(probe.offset.y, -MAX_XY_OFFSET, MAX_XY_OFFSET, 10);
              break;
            case PROBE_TEST:
              if (draw)
                Draw_Menu_Item(row, ICON_StepY, "M48 Probe Test");
              else {
                sprintf_P(cmd, PSTR("G28O\nM48 X%s Y%s P%i"), dtostrf((X_BED_SIZE + X_MIN_POS) / 2.0f, 1, 3, str_1), dtostrf((Y_BED_SIZE + Y_MIN_POS) / 2.0f, 1, 3, str_2), testcount);
                gcode.process_subcommands_now_P(cmd);
              }
              break;
            case PROBE_TEST_COUNT:
              if (draw) {
                Draw_Menu_Item(row, ICON_StepY, "Probe Test Count");
                Draw_Float(testcount, row, false, 1);
              }
              else
                Modify_Value(testcount, 4, 50, 1);
              break;
        }
        break;
    #endif

    case InfoMain:
    case Info:

      #define INFO_BACK 0
      #define INFO_PRINTCOUNT (INFO_BACK + ENABLED(PRINTCOUNTER))
      #define INFO_PRINTTIME (INFO_PRINTCOUNT + ENABLED(PRINTCOUNTER))
      #define INFO_SIZE (INFO_PRINTTIME + 1)
      #define INFO_VERSION (INFO_SIZE + 1)
      #define INFO_CONTACT (INFO_VERSION + 1)
      #define INFO_TOTAL INFO_BACK

      switch (item) {
        case INFO_BACK:
          if (draw) {
            Draw_Menu_Item(row, ICON_Back, "Back");

            #if ENABLED(PRINTCOUNTER)
              char row1[50], row2[50], buf[32];
              printStatistics ps = print_job_timer.getStats();

              sprintf_P(row1, PSTR("%i prints, %i finished"), ps.totalPrints, ps.finishedPrints);
              sprintf_P(row2, PSTR("%s m filament used"), dtostrf(ps.filamentUsed / 1000, 1, 2, str_1));
              Draw_Menu_Item(INFO_PRINTCOUNT, ICON_HotendTemp, row1, row2, false, true);

              duration_t(print_job_timer.getStats().printTime).toString(buf);
              sprintf_P(row1, PSTR("Printed: %s"), buf);
              duration_t(print_job_timer.getStats().longestPrint).toString(buf);
              sprintf_P(row2, PSTR("Longest: %s"), buf);
              Draw_Menu_Item(INFO_PRINTTIME, ICON_PrintTime, row1, row2, false, true);
            #endif

            Draw_Menu_Item(INFO_SIZE, ICON_PrintSize, MACHINE_SIZE, nullptr, false, true);
            Draw_Menu_Item(INFO_VERSION, ICON_Version, SHORT_BUILD_VERSION, nullptr, false, true);
            Draw_Menu_Item(INFO_CONTACT, ICON_Contact, CORP_WEBSITE, nullptr, false, true);
          }
          else {
            if (menu == Info)
              Draw_Menu(Control, CONTROL_INFO);
            else
              Draw_Main_Menu(3);
          }
          break;
      }
      break;

    #if HAS_MESH
      case Leveling:

        #define LEVELING_BACK 0
        #define LEVELING_ACTIVE (LEVELING_BACK + 1)
        #define LEVELING_GET_TILT (LEVELING_ACTIVE + BOTH(HAS_BED_PROBE, AUTO_BED_LEVELING_UBL))
        #define LEVELING_GET_MESH (LEVELING_GET_TILT + 1)
        #define LEVELING_MANUAL (LEVELING_GET_MESH + 1)
        #define LEVELING_VIEW (LEVELING_MANUAL + 1)
        #define LEVELING_SETTINGS (LEVELING_VIEW + 1)
        #define LEVELING_SLOT (LEVELING_SETTINGS + ENABLED(AUTO_BED_LEVELING_UBL))
        #define LEVELING_LOAD (LEVELING_SLOT + ENABLED(AUTO_BED_LEVELING_UBL))
        #define LEVELING_SAVE (LEVELING_LOAD + ENABLED(AUTO_BED_LEVELING_UBL))
        #define LEVELING_TOTAL LEVELING_SAVE

        switch (item) {
          case LEVELING_BACK:
            if (draw)
              Draw_Menu_Item(row, ICON_Back, "Back");
            else
              Draw_Main_Menu(3);
            break;
          case LEVELING_ACTIVE:
            if (draw) {
              Draw_Menu_Item(row, ICON_StockConfiguraton, "Leveling Active");
              Draw_Checkbox(row, planner.leveling_active);
            }
            else {
              if (!planner.leveling_active) {
                set_bed_leveling_enabled(!planner.leveling_active);
                if (!planner.leveling_active) {
                  Confirm_Handler(LevelError);
                  break;
                }
              }
              else
                set_bed_leveling_enabled(!planner.leveling_active);
              Draw_Checkbox(row, planner.leveling_active);
            }
            break;
          #if BOTH(HAS_BED_PROBE, AUTO_BED_LEVELING_UBL)
            case LEVELING_GET_TILT:
              if (draw)
                Draw_Menu_Item(row, ICON_Tilt, "Autotilt Current Mesh");
              else {
                if (ubl.storage_slot < 0) {
                  Popup_Handler(MeshSlot);
                  break;
                }
                Popup_Handler(Home);
                gcode.home_all_axes(true);
                Popup_Handler(Level);
                if (mesh_conf.tilt_grid > 1)
                  sprintf_P(cmd, PSTR("G29 J%i"), mesh_conf.tilt_grid);
                else
                  sprintf_P(cmd, PSTR("G29 J"));
                gcode.process_subcommands_now_P(cmd);
                planner.synchronize();
                Redraw_Menu();
              }
              break;
          #endif
          case LEVELING_GET_MESH:
            if (draw)
              Draw_Menu_Item(row, ICON_Mesh, "Create New Mesh");
            else {
              Popup_Handler(Home);
              gcode.home_all_axes(true);
              #if ENABLED(AUTO_BED_LEVELING_UBL)
                #if ENABLED(PREHEAT_BEFORE_LEVELING)
                  Popup_Handler(Heating);
                  #if HAS_HOTEND
                    if (thermalManager.degTargetHotend(0) < LEVELING_NOZZLE_TEMP)
                      thermalManager.setTargetHotend(LEVELING_NOZZLE_TEMP, 0);
                  #endif
                  #if HAS_HEATED_BED
                    if (thermalManager.degTargetBed() < LEVELING_BED_TEMP)
                      thermalManager.setTargetBed(LEVELING_BED_TEMP);
                  #endif
                  thermalManager.wait_for_hotend(0);
                  TERN_(HAS_HEATED_BED, thermalManager.wait_for_bed_heating());
                #endif
                #if HAS_BED_PROBE
                  Popup_Handler(Level);
                  gcode.process_subcommands_now_P(PSTR("G29 P0\nG29 P1"));
                  gcode.process_subcommands_now_P(PSTR("G29 P3\nG29 P3\nG29 P3\nG29 P3\nG29 P3\nG29 P3\nG29 P3\nG29 P3\nG29 P3\nG29 P3\nG29 P3\nG29 P3\nG29 P3\nG29 P3\nG29 P3\nM420 S1"));
                  planner.synchronize();
                  Update_Status("Probed all reachable points");
                  Popup_Handler(SaveLevel);
                #else
                  level_state = planner.leveling_active;
                  set_bed_leveling_enabled(false);
                  mesh_conf.goto_mesh_value = true;
                  mesh_conf.mesh_x = mesh_conf.mesh_y = 0;
                  Popup_Handler(MoveWait);
                  mesh_conf.manual_move();;
                  Draw_Menu(UBLMesh);
                #endif
              #elif HAS_BED_PROBE
                Popup_Handler(Level);
                gcode.process_subcommands_now_P(PSTR("G29"));
                planner.synchronize();
                Popup_Handler(SaveLevel);
              #else
                level_state = planner.leveling_active;
                set_bed_leveling_enabled(false);
                gridpoint = 1;
                Popup_Handler(MoveWait);
                gcode.process_subcommands_now_P(PSTR("G29"));
                planner.synchronize();
                Draw_Menu(ManualMesh);
              #endif
            }
            break;
          case LEVELING_MANUAL:
            if (draw)
              Draw_Menu_Item(row, ICON_Mesh, "Manual Tuning", nullptr, true);
            else {
              #if ENABLED(AUTO_BED_LEVELING_BILINEAR)
                if (!leveling_is_valid()) {
                  Confirm_Handler(InvalidMesh);
                  break;
                }
              #endif
              #if ENABLED(AUTO_BED_LEVELING_UBL)
                if (ubl.storage_slot < 0) {
                  Popup_Handler(MeshSlot);
                  break;
                }
              #endif
              if (axes_should_home()) {
                Popup_Handler(Home);
                gcode.home_all_axes(true);
              }
              level_state = planner.leveling_active;
              set_bed_leveling_enabled(false);
              mesh_conf.goto_mesh_value = false;
              #if ENABLED(PREHEAT_BEFORE_LEVELING)
                Popup_Handler(Heating);
                #if HAS_HOTEND
                  if (thermalManager.degTargetHotend(0) < LEVELING_NOZZLE_TEMP)
                    thermalManager.setTargetHotend(LEVELING_NOZZLE_TEMP, 0);
                #endif
                #if HAS_HEATED_BED
                  if (thermalManager.degTargetBed() < LEVELING_BED_TEMP)
                    thermalManager.setTargetBed(LEVELING_BED_TEMP);
                #endif
                TERN_(HAS_HOTEND, thermalManager.wait_for_hotend(0));
                TERN_(HAS_HEATED_BED, thermalManager.wait_for_bed_heating());
              #endif
              Popup_Handler(MoveWait);
              mesh_conf.manual_move();
              Draw_Menu(LevelManual);
            }
            break;
          case LEVELING_VIEW:
            if (draw)
              Draw_Menu_Item(row, ICON_Mesh, "Mesh Viewer", nullptr, true);
            else {
              #if ENABLED(AUTO_BED_LEVELING_UBL)
                if (ubl.storage_slot < 0) {
                  Popup_Handler(MeshSlot);
                  break;
                }
              #endif
              Draw_Menu(LevelView);
            }
            break;
          case LEVELING_SETTINGS:
            if (draw)
              Draw_Menu_Item(row, ICON_Step, "Leveling Settings", nullptr, true);
            else
              Draw_Menu(LevelSettings);
            break;
          #if ENABLED(AUTO_BED_LEVELING_UBL)
          case LEVELING_SLOT:
            if (draw) {
              Draw_Menu_Item(row, ICON_PrintSize, "Mesh Slot");
              Draw_Float(ubl.storage_slot, row, false, 1);
            }
            else
              Modify_Value(ubl.storage_slot, 0, settings.calc_num_meshes() - 1, 1);
            break;
          case LEVELING_LOAD:
            if (draw)
              Draw_Menu_Item(row, ICON_ReadEEPROM, "Load Mesh");
            else {
              if (ubl.storage_slot < 0) {
                Popup_Handler(MeshSlot);
                break;
              }
              gcode.process_subcommands_now_P(PSTR("G29 L"));
              planner.synchronize();
              AudioFeedback(true);
            }
            break;
          case LEVELING_SAVE:
            if (draw)
              Draw_Menu_Item(row, ICON_WriteEEPROM, "Save Mesh");
            else {
              if (ubl.storage_slot < 0) {
                Popup_Handler(MeshSlot);
                break;
              }
              gcode.process_subcommands_now_P(PSTR("G29 S"));
              planner.synchronize();
              AudioFeedback(true);
            }
            break;
          #endif
        }
        break;

      case LevelView:

        #define LEVELING_VIEW_BACK 0
        #define LEVELING_VIEW_MESH (LEVELING_VIEW_BACK + 1)
        #define LEVELING_VIEW_TEXT (LEVELING_VIEW_MESH + 1)
        #define LEVELING_VIEW_ASYMMETRIC (LEVELING_VIEW_TEXT + 1)
        #define LEVELING_VIEW_TOTAL LEVELING_VIEW_ASYMMETRIC

        switch (item) {
          case LEVELING_VIEW_BACK:
            if (draw)
              Draw_Menu_Item(row, ICON_Back, "Back");
            else
              Draw_Menu(Leveling, LEVELING_VIEW);
            break;
          case LEVELING_VIEW_MESH:
            if (draw)
              Draw_Menu_Item(row, ICON_PrintSize, "Mesh Viewer", nullptr, true);
            else
              Draw_Menu(MeshViewer);
            break;
          case LEVELING_VIEW_TEXT:
            if (draw) {
              Draw_Menu_Item(row, ICON_Contact, "Viewer Show Values");
              Draw_Checkbox(row, mesh_conf.viewer_print_value);
            }
            else {
              mesh_conf.viewer_print_value = !mesh_conf.viewer_print_value;
              Draw_Checkbox(row, mesh_conf.viewer_print_value);
            }
            break;
          case LEVELING_VIEW_ASYMMETRIC:
            if (draw) {
              Draw_Menu_Item(row, ICON_Axis, "Viewer Asymmetric");
              Draw_Checkbox(row, mesh_conf.viewer_asymmetric_range);
            }
            else {
              mesh_conf.viewer_asymmetric_range = !mesh_conf.viewer_asymmetric_range;
              Draw_Checkbox(row, mesh_conf.viewer_asymmetric_range);
            }
            break;
        }
        break;

      case LevelSettings:

        #define LEVELING_SETTINGS_BACK 0
        #define LEVELING_SETTINGS_FADE (LEVELING_SETTINGS_BACK + 1)
        #define LEVELING_SETTINGS_TILT (LEVELING_SETTINGS_FADE + ENABLED(AUTO_BED_LEVELING_UBL))
        #define LEVELING_SETTINGS_PLANE (LEVELING_SETTINGS_TILT + ENABLED(AUTO_BED_LEVELING_UBL))
        #define LEVELING_SETTINGS_ZERO (LEVELING_SETTINGS_PLANE + ENABLED(AUTO_BED_LEVELING_UBL))
        #define LEVELING_SETTINGS_UNDEF (LEVELING_SETTINGS_ZERO + ENABLED(AUTO_BED_LEVELING_UBL))
        #define LEVELING_SETTINGS_TOTAL LEVELING_SETTINGS_UNDEF

        switch (item) {
          case LEVELING_SETTINGS_BACK:
            if (draw)
              Draw_Menu_Item(row, ICON_Back, "Back");
            else
              Draw_Menu(Leveling, LEVELING_SETTINGS);
            break;
          case LEVELING_SETTINGS_FADE:
              if (draw) {
                Draw_Menu_Item(row, ICON_Fade, "Fade Mesh within");
                Draw_Float(planner.z_fade_height, row, false, 1);
              }
              else {
                Modify_Value(planner.z_fade_height, 0, Z_MAX_POS, 1);
                planner.z_fade_height = -1;
                set_z_fade_height(planner.z_fade_height);
              }
              break;

          #if ENABLED(AUTO_BED_LEVELING_UBL)
            case LEVELING_SETTINGS_TILT:
              if (draw) {
                Draw_Menu_Item(row, ICON_Tilt, "Tilting Grid Size");
                Draw_Float(mesh_conf.tilt_grid, row, false, 1);
              }
              else
                Modify_Value(mesh_conf.tilt_grid, 1, 8, 1);
              break;
            case LEVELING_SETTINGS_PLANE:
              if (draw)
                Draw_Menu_Item(row, ICON_ResumeEEPROM, "Convert Mesh to Plane");
              else {
                if (mesh_conf.create_plane_from_mesh()) break;
                gcode.process_subcommands_now_P(PSTR("M420 S1"));
                planner.synchronize();
                AudioFeedback(true);
              }
              break;
            case LEVELING_SETTINGS_ZERO:
              if (draw)
                Draw_Menu_Item(row, ICON_Mesh, "Zero Current Mesh");
              else
                ZERO(mesh_conf.mesh_z_values);
              break;
            case LEVELING_SETTINGS_UNDEF:
              if (draw)
                Draw_Menu_Item(row, ICON_Mesh, "Clear Current Mesh");
              else
                ubl.invalidate();
              break;
          #endif // AUTO_BED_LEVELING_UBL
        }
        break;

      case MeshViewer:
        #define MESHVIEW_BACK 0
        #define MESHVIEW_TOTAL MESHVIEW_BACK

        if (item == MESHVIEW_BACK) {
          if (draw) {
            Draw_Menu_Item(0, ICON_Back, "Back");
            mesh_conf.Draw_Bed_Mesh();
            mesh_conf.Set_Mesh_Viewer_Status();
          }
          else if (!mesh_conf.drawing_mesh) {
            Draw_Menu(LevelView, LEVELING_VIEW_MESH);
            Update_Status("");
          }
        }
        break;

      case LevelManual:

        #define LEVELING_M_BACK 0
        #define LEVELING_M_X (LEVELING_M_BACK + 1)
        #define LEVELING_M_Y (LEVELING_M_X + 1)
        #define LEVELING_M_NEXT (LEVELING_M_Y + 1)
        #define LEVELING_M_OFFSET (LEVELING_M_NEXT + 1)
        #define LEVELING_M_UP (LEVELING_M_OFFSET + 1)
        #define LEVELING_M_DOWN (LEVELING_M_UP + 1)
        #define LEVELING_M_GOTO_VALUE (LEVELING_M_DOWN + 1)
        #define LEVELING_M_UNDEF (LEVELING_M_GOTO_VALUE + ENABLED(AUTO_BED_LEVELING_UBL))
        #define LEVELING_M_TOTAL LEVELING_M_UNDEF

        switch (item) {
          case LEVELING_M_BACK:
            if (draw)
              Draw_Menu_Item(row, ICON_Back, "Back");
            else {
              set_bed_leveling_enabled(level_state);
              TERN_(AUTO_BED_LEVELING_BILINEAR, refresh_bed_level());
              Draw_Menu(Leveling, LEVELING_MANUAL);
            }
            break;
          case LEVELING_M_X:
            if (draw) {
              Draw_Menu_Item(row, ICON_MoveX, "Mesh Point X");
              Draw_Float(mesh_conf.mesh_x, row, 0, 1);
            }
            else
              Modify_Value(mesh_conf.mesh_x, 0, GRID_MAX_POINTS_X - 1, 1);
            break;
          case LEVELING_M_Y:
            if (draw) {
              Draw_Menu_Item(row, ICON_MoveY, "Mesh Point Y");
              Draw_Float(mesh_conf.mesh_y, row, 0, 1);
            }
            else
              Modify_Value(mesh_conf.mesh_y, 0, GRID_MAX_POINTS_Y - 1, 1);
            break;
          case LEVELING_M_NEXT:
            if (draw)
              Draw_Menu_Item(row, ICON_More, "Next Point");
            else {
              if (mesh_conf.mesh_x != (GRID_MAX_POINTS_X - 1) || mesh_conf.mesh_y != (GRID_MAX_POINTS_Y - 1)) {
                if ((mesh_conf.mesh_x == (GRID_MAX_POINTS_X - 1) && mesh_conf.mesh_y % 2 == 0) || (mesh_conf.mesh_x == 0 && mesh_conf.mesh_y % 2 == 1))
                  mesh_conf.mesh_y++;
                else if (mesh_conf.mesh_y % 2 == 0)
                  mesh_conf.mesh_x++;
                else
                  mesh_conf.mesh_x--;
                mesh_conf.manual_move();
              }
            }
            break;
          case LEVELING_M_OFFSET:
            if (draw) {
              Draw_Menu_Item(row, ICON_SetZOffset, "Point Z Offset");
              Draw_Float(mesh_conf.mesh_z_values[mesh_conf.mesh_x][mesh_conf.mesh_y], row, false, 100);
            }
            else {
              if (isnan(mesh_conf.mesh_z_values[mesh_conf.mesh_x][mesh_conf.mesh_y]))
                mesh_conf.mesh_z_values[mesh_conf.mesh_x][mesh_conf.mesh_y] = 0;
              Modify_Value(mesh_conf.mesh_z_values[mesh_conf.mesh_x][mesh_conf.mesh_y], MIN_Z_OFFSET, MAX_Z_OFFSET, 100);
            }
            break;
          case LEVELING_M_UP:
            if (draw)
              Draw_Menu_Item(row, ICON_Axis, "Microstep Up");
            else if (mesh_conf.mesh_z_values[mesh_conf.mesh_x][mesh_conf.mesh_y] < MAX_Z_OFFSET) {
              mesh_conf.mesh_z_values[mesh_conf.mesh_x][mesh_conf.mesh_y] += 0.01;
              gcode.process_subcommands_now_P(PSTR("M290 Z0.01"));
              planner.synchronize();
              current_position.z += 0.01f;
              sync_plan_position();
              Draw_Float(mesh_conf.mesh_z_values[mesh_conf.mesh_x][mesh_conf.mesh_y], row - 1, false, 100);
            }
            break;
          case LEVELING_M_DOWN:
            if (draw)
              Draw_Menu_Item(row, ICON_AxisD, "Microstep Down");
            else if (mesh_conf.mesh_z_values[mesh_conf.mesh_x][mesh_conf.mesh_y] > MIN_Z_OFFSET) {
              mesh_conf.mesh_z_values[mesh_conf.mesh_x][mesh_conf.mesh_y] -= 0.01;
              gcode.process_subcommands_now_P(PSTR("M290 Z-0.01"));
              planner.synchronize();
              current_position.z -= 0.01f;
              sync_plan_position();
              Draw_Float(mesh_conf.mesh_z_values[mesh_conf.mesh_x][mesh_conf.mesh_y], row - 2, false, 100);
            }
            break;
          case LEVELING_M_GOTO_VALUE:
            if (draw) {
              Draw_Menu_Item(row, ICON_StockConfiguraton, "Go to Mesh Z Value");
              Draw_Checkbox(row, mesh_conf.goto_mesh_value);
            }
            else {
              mesh_conf.goto_mesh_value = !mesh_conf.goto_mesh_value;
              current_position.z = 0;
              mesh_conf.manual_move(true);
              Draw_Checkbox(row, mesh_conf.goto_mesh_value);
            }
            break;
          #if ENABLED(AUTO_BED_LEVELING_UBL)
          case LEVELING_M_UNDEF:
            if (draw)
              Draw_Menu_Item(row, ICON_ResumeEEPROM, "Clear Point Value");
            else {
              mesh_conf.manual_value_update(true);
              Redraw_Menu(false);
            }
            break;
          #endif
        }
        break;
    #endif // HAS_MESH

    #if ENABLED(AUTO_BED_LEVELING_UBL) && !HAS_BED_PROBE
      case UBLMesh:

        #define UBL_M_BACK 0
        #define UBL_M_NEXT (UBL_M_BACK + 1)
        #define UBL_M_PREV (UBL_M_NEXT + 1)
        #define UBL_M_OFFSET (UBL_M_PREV + 1)
        #define UBL_M_UP (UBL_M_OFFSET + 1)
        #define UBL_M_DOWN (UBL_M_UP + 1)
        #define UBL_M_TOTAL UBL_M_DOWN

        switch (item) {
          case UBL_M_BACK:
            if (draw)
              Draw_Menu_Item(row, ICON_Back, "Back");
            else {
              set_bed_leveling_enabled(level_state);
              Draw_Menu(Leveling, LEVELING_GET_MESH);
            }
            break;
          case UBL_M_NEXT:
            if (draw) {
              if (mesh_conf.mesh_x != (GRID_MAX_POINTS_X - 1) || mesh_conf.mesh_y != (GRID_MAX_POINTS_Y - 1))
                Draw_Menu_Item(row, ICON_More, "Next Point");
              else
                Draw_Menu_Item(row, ICON_More, "Save Mesh");
            }
            else {
              if (mesh_conf.mesh_x != (GRID_MAX_POINTS_X - 1) || mesh_conf.mesh_y != (GRID_MAX_POINTS_Y - 1)) {
                if ((mesh_conf.mesh_x == (GRID_MAX_POINTS_X - 1) && mesh_conf.mesh_y % 2 == 0) || (mesh_conf.mesh_x == 0 && mesh_conf.mesh_y % 2 == 1))
                  mesh_conf.mesh_y++;
                else if (mesh_conf.mesh_y % 2 == 0)
                  mesh_conf.mesh_x++;
                else
                  mesh_conf.mesh_x--;
                mesh_conf.manual_move();
              }
              else {
                gcode.process_subcommands_now_P(PSTR("G29 S"));
                planner.synchronize();
                AudioFeedback(true);
                Draw_Menu(Leveling, LEVELING_GET_MESH);
              }
            }
            break;
          case UBL_M_PREV:
            if (draw)
              Draw_Menu_Item(row, ICON_More, "Previous Point");
            else {
              if (mesh_conf.mesh_x != 0 || mesh_conf.mesh_y != 0) {
                if ((mesh_conf.mesh_x == (GRID_MAX_POINTS_X - 1) && mesh_conf.mesh_y % 2 == 1) || (mesh_conf.mesh_x == 0 && mesh_conf.mesh_y % 2 == 0))
                  mesh_conf.mesh_y--;
                else if (mesh_conf.mesh_y % 2 == 0)
                  mesh_conf.mesh_x--;
                else
                  mesh_conf.mesh_x++;
                mesh_conf.manual_move();
              }
            }
            break;
          case UBL_M_OFFSET:
            if (draw) {
              Draw_Menu_Item(row, ICON_SetZOffset, "Point Z Offset");
              Draw_Float(mesh_conf.mesh_z_values[mesh_conf.mesh_x][mesh_conf.mesh_y], row, false, 100);
            }
            else {
              if (isnan(mesh_conf.mesh_z_values[mesh_conf.mesh_x][mesh_conf.mesh_y]))
                mesh_conf.mesh_z_values[mesh_conf.mesh_x][mesh_conf.mesh_y] = 0;
              Modify_Value(mesh_conf.mesh_z_values[mesh_conf.mesh_x][mesh_conf.mesh_y], MIN_Z_OFFSET, MAX_Z_OFFSET, 100);
            }
            break;
          case UBL_M_UP:
            if (draw)
              Draw_Menu_Item(row, ICON_Axis, "Microstep Up");
            else if (mesh_conf.mesh_z_values[mesh_conf.mesh_x][mesh_conf.mesh_y] < MAX_Z_OFFSET) {
              mesh_conf.mesh_z_values[mesh_conf.mesh_x][mesh_conf.mesh_y] += 0.01;
              gcode.process_subcommands_now_P(PSTR("M290 Z0.01"));
              planner.synchronize();
              current_position.z += 0.01f;
              sync_plan_position();
              Draw_Float(mesh_conf.mesh_z_values[mesh_conf.mesh_x][mesh_conf.mesh_y], row - 1, false, 100);
            }
            break;
          case UBL_M_DOWN:
            if (draw)
              Draw_Menu_Item(row, ICON_Axis, "Microstep Down");
            else if (mesh_conf.mesh_z_values[mesh_conf.mesh_x][mesh_conf.mesh_y] > MIN_Z_OFFSET) {
              mesh_conf.mesh_z_values[mesh_conf.mesh_x][mesh_conf.mesh_y] -= 0.01;
              gcode.process_subcommands_now_P(PSTR("M290 Z-0.01"));
              planner.synchronize();
              current_position.z -= 0.01f;
              sync_plan_position();
              Draw_Float(mesh_conf.mesh_z_values[mesh_conf.mesh_x][mesh_conf.mesh_y], row - 2, false, 100);
            }
            break;
        }
        break;
    #endif // AUTO_BED_LEVELING_UBL && !HAS_BED_PROBE

    #if ENABLED(PROBE_MANUALLY)
      case ManualMesh:

        #define MMESH_BACK 0
        #define MMESH_NEXT (MMESH_BACK + 1)
        #define MMESH_OFFSET (MMESH_NEXT + 1)
        #define MMESH_UP (MMESH_OFFSET + 1)
        #define MMESH_DOWN (MMESH_UP + 1)
        #define MMESH_OLD (MMESH_DOWN + 1)
        #define MMESH_TOTAL MMESH_OLD

        switch (item) {
          case MMESH_BACK:
            if (draw)
              Draw_Menu_Item(row, ICON_Back, "Cancel");
            else {
              gcode.process_subcommands_now_P(PSTR("G29 A"));
              planner.synchronize();
              set_bed_leveling_enabled(level_state);
              Draw_Menu(Leveling, LEVELING_GET_MESH);
            }
            break;
          case MMESH_NEXT:
            if (draw) {
              if (gridpoint < GRID_MAX_POINTS)
                Draw_Menu_Item(row, ICON_More, "Next Point");
              else
                Draw_Menu_Item(row, ICON_More, "Save Mesh");
            }
            else if (gridpoint < GRID_MAX_POINTS) {
              Popup_Handler(MoveWait);
              gcode.process_subcommands_now_P(PSTR("G29"));
              planner.synchronize();
              gridpoint++;
              Redraw_Menu();
            }
            else {
              gcode.process_subcommands_now_P(PSTR("G29"));
              planner.synchronize();
              AudioFeedback(settings.save());
              Draw_Menu(Leveling, LEVELING_GET_MESH);
            }
            break;
          case MMESH_OFFSET:
            if (draw) {
              Draw_Menu_Item(row, ICON_SetZOffset, "Z Position");
              current_position.z = MANUAL_PROBE_START_Z;
              Draw_Float(current_position.z, row, false, 100);
            }
            else
              Modify_Value(current_position.z, MIN_Z_OFFSET, MAX_Z_OFFSET, 100);
            break;
          case MMESH_UP:
            if (draw)
              Draw_Menu_Item(row, ICON_Axis, "Microstep Up");
            else if (current_position.z < MAX_Z_OFFSET) {
              gcode.process_subcommands_now_P(PSTR("M290 Z0.01"));
              planner.synchronize();
              current_position.z += 0.01f;
              sync_plan_position();
              Draw_Float(current_position.z, row - 1, false, 100);
            }
            break;
          case MMESH_DOWN:
            if (draw)
              Draw_Menu_Item(row, ICON_AxisD, "Microstep Down");
            else if (current_position.z > MIN_Z_OFFSET) {
              gcode.process_subcommands_now_P(PSTR("M290 Z-0.01"));
              planner.synchronize();
              current_position.z -= 0.01f;
              sync_plan_position();
              Draw_Float(current_position.z, row - 2, false, 100);
            }
            break;
          case MMESH_OLD:
            uint8_t mesh_x, mesh_y;
            // 0,0 -> 1,0 -> 2,0 -> 2,1 -> 1,1 -> 0,1 -> 0,2 -> 1,2 -> 2,2
            mesh_y = (gridpoint - 1) / GRID_MAX_POINTS_Y;
            mesh_x = (gridpoint - 1) % GRID_MAX_POINTS_X;

            if (mesh_y % 2 == 1)
              mesh_x = GRID_MAX_POINTS_X - mesh_x - 1;

            const float currval = mesh_conf.mesh_z_values[mesh_x][mesh_y];

            if (draw) {
              Draw_Menu_Item(row, ICON_Zoffset, "Goto Mesh Value");
              Draw_Float(currval, row, false, 100);
            }
            else if (!isnan(currval)) {
              current_position.z = currval;
              planner.synchronize();
              planner.buffer_line(current_position, homing_feedrate(Z_AXIS), active_extruder);
              planner.synchronize();
              Draw_Float(current_position.z, row - 3, false, 100);
            }
            break;
        }
        break;
    #endif // PROBE_MANUALLY

    case Tune:

      #define TUNE_BACK 0
      #define TUNE_SPEED (TUNE_BACK + 1)
      #define TUNE_FLOW (TUNE_SPEED + ENABLED(HAS_HOTEND))
      #define TUNE_HOTEND (TUNE_FLOW + ENABLED(HAS_HOTEND))
      #define TUNE_BED (TUNE_HOTEND + ENABLED(HAS_HEATED_BED))
      #define TUNE_FAN (TUNE_BED + ENABLED(HAS_FAN))
      #define TUNE_ZOFFSET (TUNE_FAN + ENABLED(HAS_ZOFFSET_ITEM))
      #define TUNE_ZUP (TUNE_ZOFFSET + ENABLED(HAS_ZOFFSET_ITEM))
      #define TUNE_ZDOWN (TUNE_ZUP + ENABLED(HAS_ZOFFSET_ITEM))
      #define TUNE_CHANGEFIL (TUNE_ZDOWN + ENABLED(FILAMENT_LOAD_UNLOAD_GCODES))
      #define TUNE_FILSENSORENABLED (TUNE_CHANGEFIL + ENABLED(FILAMENT_RUNOUT_SENSOR))
      #define TUNE_BACKLIGHT_OFF (TUNE_FILSENSORENABLED + 1)
      #define TUNE_BACKLIGHT (TUNE_BACKLIGHT_OFF + 1)
      #define TUNE_TOTAL TUNE_BACKLIGHT

      switch (item) {
        case TUNE_BACK:
          if (draw)
            Draw_Menu_Item(row, ICON_Back, "Back");
          else
            Draw_Print_Screen();
          break;
        case TUNE_SPEED:
          if (draw) {
            Draw_Menu_Item(row, ICON_Speed, "Print Speed");
            Draw_Float(feedrate_percentage, row, false, 1);
          }
          else
            Modify_Value(feedrate_percentage, MIN_PRINT_SPEED, MAX_PRINT_SPEED, 1);
          break;

        #if HAS_HOTEND
          case TUNE_FLOW:
            if (draw) {
              Draw_Menu_Item(row, ICON_Speed, "Flow Rate");
              Draw_Float(planner.flow_percentage[0], row, false, 1);
            }
            else
              Modify_Value(planner.flow_percentage[0], MIN_FLOW_RATE, MAX_FLOW_RATE, 1);
            break;
          case TUNE_HOTEND:
            if (draw) {
              Draw_Menu_Item(row, ICON_SetEndTemp, "Hotend");
              Draw_Float(thermalManager.temp_hotend[0].target, row, false, 1);
            }
            else
              Modify_Value(thermalManager.temp_hotend[0].target, MIN_E_TEMP, MAX_E_TEMP, 1);
            break;
        #endif

        #if HAS_HEATED_BED
          case TUNE_BED:
            if (draw) {
              Draw_Menu_Item(row, ICON_SetBedTemp, "Bed");
              Draw_Float(thermalManager.temp_bed.target, row, false, 1);
            }
            else
              Modify_Value(thermalManager.temp_bed.target, MIN_BED_TEMP, MAX_BED_TEMP, 1);
            break;
        #endif

        #if HAS_FAN
          case TUNE_FAN:
            if (draw) {
              Draw_Menu_Item(row, ICON_FanSpeed, "Fan");
              Draw_Float(thermalManager.fan_speed[0], row, false, 1);
            }
            else
              Modify_Value(thermalManager.fan_speed[0], MIN_FAN_SPEED, MAX_FAN_SPEED, 1);
            break;
        #endif

        #if HAS_ZOFFSET_ITEM
          case TUNE_ZOFFSET:
            if (draw) {
              Draw_Menu_Item(row, ICON_FanSpeed, "Z-Offset");
              Draw_Float(zoffsetvalue, row, false, 100);
            }
            else
              Modify_Value(zoffsetvalue, MIN_Z_OFFSET, MAX_Z_OFFSET, 100);
            break;
          case TUNE_ZUP:
            if (draw)
              Draw_Menu_Item(row, ICON_Axis, "Z-Offset Up");
            else if (zoffsetvalue < MAX_Z_OFFSET) {
              gcode.process_subcommands_now_P(PSTR("M290 Z0.01"));
              zoffsetvalue += 0.01;
              Draw_Float(zoffsetvalue, row - 1, false, 100);
            }
            break;
          case TUNE_ZDOWN:
            if (draw)
              Draw_Menu_Item(row, ICON_AxisD, "Z-Offset Down");
            else if (zoffsetvalue > MIN_Z_OFFSET) {
              gcode.process_subcommands_now_P(PSTR("M290 Z-0.01"));
              zoffsetvalue -= 0.01;
              Draw_Float(zoffsetvalue, row - 2, false, 100);
            }
            break;
        #endif

        #if ENABLED(FILAMENT_LOAD_UNLOAD_GCODES)
          case TUNE_CHANGEFIL:
            if (draw)
              Draw_Menu_Item(row, ICON_ResumeEEPROM, "Change Filament");
            else
              Popup_Handler(ConfFilChange);
            break;
        #endif

        #if ENABLED(FILAMENT_RUNOUT_SENSOR)
          case TUNE_FILSENSORENABLED:
            if (draw) {
              Draw_Menu_Item(row, ICON_Extruder, "Filament Sensor");
              Draw_Checkbox(row, runout.enabled);
            }
            else {
              runout.enabled = !runout.enabled;
              Draw_Checkbox(row, runout.enabled);
            }
            break;
        #endif

        case TUNE_BACKLIGHT_OFF:
          if (draw)
            Draw_Menu_Item(row, ICON_Brightness, "Display Off");
          else
            ui.set_brightness(0);
          break;
        case TUNE_BACKLIGHT:
          if (draw) {
            Draw_Menu_Item(row, ICON_Brightness, "LCD Brightness");
            Draw_Float(ui.brightness, row, false, 1);
          }
          else
            Modify_Value(ui.brightness, MIN_LCD_BRIGHTNESS, MAX_LCD_BRIGHTNESS, 1, ui.refresh_brightness);
          break;
      }
      break;

    case PreheatHotend:

        #define PREHEATHOTEND_BACK 0
        #define PREHEATHOTEND_CONTINUE (PREHEATHOTEND_BACK + 1)
        #define PREHEATHOTEND_1 (PREHEATHOTEND_CONTINUE + (PREHEAT_COUNT >= 1))
        #define PREHEATHOTEND_2 (PREHEATHOTEND_1 + (PREHEAT_COUNT >= 2))
        #define PREHEATHOTEND_3 (PREHEATHOTEND_2 + (PREHEAT_COUNT >= 3))
        #define PREHEATHOTEND_4 (PREHEATHOTEND_3 + (PREHEAT_COUNT >= 4))
        #define PREHEATHOTEND_5 (PREHEATHOTEND_4 + (PREHEAT_COUNT >= 5))
        #define PREHEATHOTEND_CUSTOM (PREHEATHOTEND_5 + 1)
        #define PREHEATHOTEND_TOTAL PREHEATHOTEND_CUSTOM

        switch (item) {
          case PREHEATHOTEND_BACK:
            if (draw)
              Draw_Menu_Item(row, ICON_Back, "Cancel");
            else {
              thermalManager.setTargetHotend(0, 0);
              thermalManager.set_fan_speed(0, 0);
              Redraw_Menu(false, true, true);
            }
            break;
          case PREHEATHOTEND_CONTINUE:
            if (draw)
              Draw_Menu_Item(row, ICON_SetEndTemp, "Continue");
            else {
              Popup_Handler(Heating);
              thermalManager.wait_for_hotend(0);
              switch (last_menu) {
                case Prepare:
                  Popup_Handler(FilChange);
                  sprintf_P(cmd, PSTR("M600 B1 R%i"), thermalManager.temp_hotend[0].target);
                  gcode.process_subcommands_now_P(cmd);
                  break;
                #if ENABLED(FILAMENT_LOAD_UNLOAD_GCODES)
                  case ChangeFilament:
                    switch (last_selection) {
                      case CHANGEFIL_LOAD:
                        Popup_Handler(FilLoad);
                        gcode.process_subcommands_now_P("M701");
                        planner.synchronize();
                        Redraw_Menu(true, true, true);
                        break;
                      case CHANGEFIL_UNLOAD:
                        Popup_Handler(FilLoad, true);
                        gcode.process_subcommands_now_P("M702");
                        planner.synchronize();
                        Redraw_Menu(true, true, true);
                        break;
                      case CHANGEFIL_CHANGE:
                        Popup_Handler(FilChange);
                        sprintf_P(cmd, PSTR("M600 B1 R%i"), thermalManager.temp_hotend[0].target);
                        gcode.process_subcommands_now_P(cmd);
                        break;
                    }
                    break;
                #endif
                default:
                  Redraw_Menu(true, true, true);
                  break;
              }
            }
            break;
          #if PREHEAT_COUNT >= 1
            case PREHEATHOTEND_1:
              if (draw)
                Draw_Menu_Item(row, ICON_Temperature, PREHEAT_1_LABEL);
              else {
                thermalManager.setTargetHotend(ui.material_preset[0].hotend_temp, 0);
                thermalManager.set_fan_speed(0, ui.material_preset[0].fan_speed);
              }
              break;
          #endif
          #if PREHEAT_COUNT >= 2
            case PREHEATHOTEND_2:
              if (draw)
                Draw_Menu_Item(row, ICON_Temperature, PREHEAT_2_LABEL);
              else {
                thermalManager.setTargetHotend(ui.material_preset[1].hotend_temp, 0);
                thermalManager.set_fan_speed(0, ui.material_preset[1].fan_speed);
              }
              break;
          #endif
          #if PREHEAT_COUNT >= 3
            case PREHEATHOTEND_3:
              if (draw)
                Draw_Menu_Item(row, ICON_Temperature, PREHEAT_3_LABEL);
              else {
                thermalManager.setTargetHotend(ui.material_preset[2].hotend_temp, 0);
                thermalManager.set_fan_speed(0, ui.material_preset[2].fan_speed);
              }
              break;
          #endif
          #if PREHEAT_COUNT >= 4
            case PREHEATHOTEND_4:
              if (draw)
                Draw_Menu_Item(row, ICON_Temperature, PREHEAT_4_LABEL);
              else {
                thermalManager.setTargetHotend(ui.material_preset[3].hotend_temp, 0);
                thermalManager.set_fan_speed(0, ui.material_preset[3].fan_speed);
              }
              break;
          #endif
          #if PREHEAT_COUNT >= 5
            case PREHEATHOTEND_5:
              if (draw)
                Draw_Menu_Item(row, ICON_Temperature, PREHEAT_5_LABEL);
              else {
                thermalManager.setTargetHotend(ui.material_preset[4].hotend_temp, 0);
                thermalManager.set_fan_speed(0, ui.material_preset[4].fan_speed);
              }
              break;
          #endif
          case PREHEATHOTEND_CUSTOM:
            if (draw) {
              Draw_Menu_Item(row, ICON_Temperature, "Custom");
              Draw_Float(thermalManager.temp_hotend[0].target, row, false, 1);
            }
            else
              Modify_Value(thermalManager.temp_hotend[0].target, EXTRUDE_MINTEMP, MAX_E_TEMP, 1);
            break;
        }
        break;
  }
}

const char * CrealityDWINClass::Get_Menu_Title(uint8_t menu) {
  switch (menu) {
    case MainMenu:          return "Main Menu";
    case Prepare:           return "Prepare";
    case HomeMenu:          return "Homing Menu";
    case Move:              return "Move";
    case ManualLevel:       return "Manual Leveling";
    #if HAS_ZOFFSET_ITEM
      case ZOffset:         return "Z Offset";
    #endif
    #if HAS_PREHEAT
      case Preheat:         return "Preheat";
    #endif
    #if ENABLED(FILAMENT_LOAD_UNLOAD_GCODES)
      case ChangeFilament:  return "Change Filament";
    #endif
    case Control:           return "Control";
    case TempMenu:          return "Temperature";
    #if HAS_HOTEND || HAS_HEATED_BED
      case PID:             return "PID Menu";
    #endif
    #if HAS_HOTEND
      case HotendPID:       return "Hotend PID Settings";
    #endif
    #if HAS_HEATED_BED
      case BedPID:          return "Bed PID Settings";
    #endif
    #if PREHEAT_COUNT >= 1
      case Preheat1:        return (PREHEAT_1_LABEL " Settings");
    #endif
    #if PREHEAT_COUNT >= 2
      case Preheat2:        return (PREHEAT_2_LABEL " Settings");
    #endif
    #if PREHEAT_COUNT >= 3
      case Preheat3:        return (PREHEAT_3_LABEL " Settings");
    #endif
    #if PREHEAT_COUNT >= 4
      case Preheat4:        return (PREHEAT_4_LABEL " Settings");
    #endif
    #if PREHEAT_COUNT >= 5
      case Preheat5:        return (PREHEAT_5_LABEL " Settings");
    #endif
    case Motion:            return "Motion Settings";
    case HomeOffsets:       return "Home Offsets";
    case MaxSpeed:          return "Max Speed";
    case MaxAcceleration:   return "Max Acceleration";
    #if HAS_CLASSIC_JERK
      case MaxJerk:         return "Max Jerk";
    #endif
    case Steps:             return "Steps/mm";
    case Visual:            return "Visual Settings";
    case Advanced:          return "Advanced Settings";
    #if HAS_BED_PROBE
      case ProbeMenu:       return "Probe Menu";
    #endif
    case ColorSettings:     return "UI Color Settings";
    case Info:              return "Info";
    case InfoMain:          return "Info";
    #if HAS_MESH
      case Leveling:        return "Leveling";
      case LevelView:       return "Mesh View";
      case LevelSettings:   return "Leveling Settings";
      case MeshViewer:      return "Mesh Viewer";
      case LevelManual:     return "Manual Tuning";
    #endif
    #if ENABLED(AUTO_BED_LEVELING_UBL) && !HAS_BED_PROBE
      case UBLMesh:         return "UBL Bed Leveling";
    #endif
    #if ENABLED(PROBE_MANUALLY)
      case ManualMesh:      return "Mesh Bed Leveling";
    #endif
    case Tune:              return "Tune";
    case PreheatHotend:     return "Preheat Hotend";
  }
  return "";
}

uint8_t CrealityDWINClass::Get_Menu_Size(uint8_t menu) {
  switch (menu) {
    case Prepare:           return PREPARE_TOTAL;
    case HomeMenu:          return HOME_TOTAL;
    case Move:              return MOVE_TOTAL;
    case ManualLevel:       return MLEVEL_TOTAL;
    #if HAS_ZOFFSET_ITEM
      case ZOffset:         return ZOFFSET_TOTAL;
    #endif
    #if HAS_PREHEAT
      case Preheat:         return PREHEAT_TOTAL;
    #endif
    #if ENABLED(FILAMENT_LOAD_UNLOAD_GCODES)
      case ChangeFilament:  return CHANGEFIL_TOTAL;
    #endif
    case Control:           return CONTROL_TOTAL;
    case TempMenu:          return TEMP_TOTAL;
    #if HAS_HOTEND || HAS_HEATED_BED
      case PID:             return PID_TOTAL;
    #endif
    #if HAS_HOTEND
      case HotendPID:       return HOTENDPID_TOTAL;
    #endif
    #if HAS_HEATED_BED
      case BedPID:          return BEDPID_TOTAL;
    #endif
    #if PREHEAT_COUNT >= 1
      case Preheat1:        return PREHEAT1_TOTAL;
    #endif
    #if PREHEAT_COUNT >= 2
      case Preheat2:        return PREHEAT2_TOTAL;
    #endif
    #if PREHEAT_COUNT >= 3
      case Preheat3:        return PREHEAT3_TOTAL;
    #endif
    #if PREHEAT_COUNT >= 4
      case Preheat4:        return PREHEAT4_TOTAL;
    #endif
    #if PREHEAT_COUNT >= 5
      case Preheat5:        return PREHEAT5_TOTAL;
    #endif
    case Motion:            return MOTION_TOTAL;
    case HomeOffsets:       return HOMEOFFSETS_TOTAL;
    case MaxSpeed:          return SPEED_TOTAL;
    case MaxAcceleration:   return ACCEL_TOTAL;
    #if HAS_CLASSIC_JERK
      case MaxJerk:         return JERK_TOTAL;
    #endif
    case Steps:             return STEPS_TOTAL;
    case Visual:            return VISUAL_TOTAL;
    case Advanced:          return ADVANCED_TOTAL;
    #if HAS_BED_PROBE
      case ProbeMenu:       return PROBE_TOTAL;
    #endif
    case Info:              return INFO_TOTAL;
    case InfoMain:          return INFO_TOTAL;
    #if ENABLED(AUTO_BED_LEVELING_UBL) && !HAS_BED_PROBE
      case UBLMesh:         return UBL_M_TOTAL;
    #endif
    #if ENABLED(PROBE_MANUALLY)
      case ManualMesh:      return MMESH_TOTAL;
    #endif
    #if HAS_MESH
      case Leveling:        return LEVELING_TOTAL;
      case LevelView:       return LEVELING_VIEW_TOTAL;
      case LevelSettings:   return LEVELING_SETTINGS_TOTAL;
      case MeshViewer:      return MESHVIEW_TOTAL;
      case LevelManual:     return LEVELING_M_TOTAL;
    #endif
    case Tune:              return TUNE_TOTAL;
    case PreheatHotend:     return PREHEATHOTEND_TOTAL;
    case ColorSettings:     return COLORSETTINGS_TOTAL;
  }
  return 0;
}

/* Popup Config */

void CrealityDWINClass::Popup_Handler(PopupID popupid, bool option/*=false*/) {
  popup = last_popup = popupid;
  switch (popupid) {
    case Pause:         Draw_Popup(PSTR("Pause Print"), PSTR(""), PSTR(""), Popup); break;
    case Stop:          Draw_Popup(PSTR("Stop Print"), PSTR(""), PSTR(""), Popup); break;
    case Resume:        Draw_Popup(PSTR("Resume Print?"), PSTR("Looks Like the last"), PSTR("print was interupted."), Popup); break;
    case ConfFilChange: Draw_Popup(PSTR("Confirm Filament Change"), PSTR(""), PSTR(""), Popup); break;
    case PurgeMore:     Draw_Popup(PSTR("Purge more filament?"), PSTR("(Cancel to finish process)"), PSTR(""), Popup); break;
    case SaveLevel:     Draw_Popup(PSTR("Leveling Complete"), PSTR("Save to EEPROM?"), PSTR(""), Popup); break;
    case MeshSlot:      Draw_Popup(PSTR("Mesh slot not selected"), PSTR("(Confirm to select slot 0)"), PSTR(""), Popup); break;
    case ETemp:         Draw_Popup(PSTR("Nozzle is too cold"), PSTR("Open Preheat Menu?"), PSTR(""), Popup); break;
    case ManualProbing: Draw_Popup(PSTR("Manual Probing"), PSTR("(Confirm to probe)"), PSTR("(cancel to exit)"), Popup); break;
    case Level:         Draw_Popup(PSTR("Auto Bed Leveling"), PSTR("Please wait until done."), PSTR(""), Wait, ICON_AutoLeveling); break;
    case Home:          Draw_Popup(option ? PSTR("Parking") : PSTR("Homing"), PSTR("Please wait until done."), PSTR(""), Wait, ICON_BLTouch); break;
    case MoveWait:      Draw_Popup(PSTR("Moving to Point"), PSTR("Please wait until done."), PSTR(""), Wait, ICON_BLTouch); break;
    case Heating:       Draw_Popup(PSTR("Heating"), PSTR("Please wait until done."), PSTR(""), Wait, ICON_BLTouch); break;
    case FilLoad:       Draw_Popup(option ? PSTR("Unloading Filament") : PSTR("Loading Filament"), PSTR("Please wait until done."), PSTR(""), Wait, ICON_BLTouch); break;
    case FilChange:     Draw_Popup(PSTR("Filament Change"), PSTR("Please wait for prompt."), PSTR(""), Wait, ICON_BLTouch); break;
    case TempWarn:      Draw_Popup(option ? PSTR("Nozzle temp too low!") : PSTR("Nozzle temp too high!"), PSTR(""), PSTR(""), Wait, option ? ICON_TempTooLow : ICON_TempTooHigh); break;
    case Runout:        Draw_Popup(PSTR("Filament Runout"), PSTR(""), PSTR(""), Wait, ICON_BLTouch); break;
    case PIDWait:       Draw_Popup(PSTR("PID Autotune"), PSTR("in process"), PSTR("Please wait until done."), Wait, ICON_BLTouch); break;
    case Resuming:      Draw_Popup(PSTR("Resuming Print"), PSTR("Please wait until done."), PSTR(""), Wait, ICON_BLTouch); break;
    default: break;
  }
}

void CrealityDWINClass::Confirm_Handler(PopupID popupid) {
  popup = popupid;
  switch (popupid) {
    case FilInsert:   Draw_Popup(PSTR("Insert Filament"), PSTR("Press to Continue"), PSTR(""), Confirm); break;
    case HeaterTime:  Draw_Popup(PSTR("Heater Timed Out"), PSTR("Press to Reheat"), PSTR(""), Confirm); break;
    case UserInput:   Draw_Popup(PSTR("Waiting for Input"), PSTR("Press to Continue"), PSTR(""), Confirm); break;
    case LevelError:  Draw_Popup(PSTR("Couldn't enable Leveling"), PSTR("(Valid mesh must exist)"), PSTR(""), Confirm); break;
    case InvalidMesh: Draw_Popup(PSTR("Valid mesh must exist"), PSTR("before tuning can be"), PSTR("performed"), Confirm); break;
    default: break;
  }
}

/* Navigation and Control */

void CrealityDWINClass::Main_Menu_Control() {
  ENCODER_DiffState encoder_diffState = Encoder_ReceiveAnalyze();
  if (encoder_diffState == ENCODER_DIFF_NO) return;
  if (encoder_diffState == ENCODER_DIFF_CW && selection < 3) {
    selection++; // Select Down
    Main_Menu_Icons();
  }
  else if (encoder_diffState == ENCODER_DIFF_CCW && selection > 0) {
    selection--; // Select Up
    Main_Menu_Icons();
  }
  else if (encoder_diffState == ENCODER_DIFF_ENTER)
    switch (selection) {
      case 0: card.mount(); Draw_SD_List(); break;
      case 1: Draw_Menu(Prepare); break;
      case 2: Draw_Menu(Control); break;
      case 3: Draw_Menu(TERN(HAS_MESH, Leveling, InfoMain)); break;
    }
  DWIN_UpdateLCD();
}

void CrealityDWINClass::Menu_Control() {
  ENCODER_DiffState encoder_diffState = Encoder_ReceiveAnalyze();
  if (encoder_diffState == ENCODER_DIFF_NO) return;
  if (encoder_diffState == ENCODER_DIFF_CW && selection < Get_Menu_Size(active_menu)) {
    DWIN_Draw_Rectangle(1, Color_Bg_Black, 0, MBASE(selection - scrollpos) - 18, 14, MBASE(selection - scrollpos) + 33);
    selection++; // Select Down
    if (selection > scrollpos+MROWS) {
      scrollpos++;
      DWIN_Frame_AreaMove(1, 2, MLINE, Color_Bg_Black, 0, 31, DWIN_WIDTH, 349);
      Menu_Item_Handler(active_menu, selection);
    }
    DWIN_Draw_Rectangle(1, GetColor(eeprom_settings.cursor_color, Rectangle_Color), 0, MBASE(selection - scrollpos) - 18, 14, MBASE(selection - scrollpos) + 33);
  }
  else if (encoder_diffState == ENCODER_DIFF_CCW && selection > 0) {
    DWIN_Draw_Rectangle(1, Color_Bg_Black, 0, MBASE(selection - scrollpos) - 18, 14, MBASE(selection - scrollpos) + 33);
    selection--; // Select Up
    if (selection < scrollpos) {
      scrollpos--;
      DWIN_Frame_AreaMove(1, 3, MLINE, Color_Bg_Black, 0, 31, DWIN_WIDTH, 349);
      Menu_Item_Handler(active_menu, selection);
    }
    DWIN_Draw_Rectangle(1, GetColor(eeprom_settings.cursor_color, Rectangle_Color), 0, MBASE(selection - scrollpos) - 18, 14, MBASE(selection - scrollpos) + 33);
  }
  else if (encoder_diffState == ENCODER_DIFF_ENTER)
    Menu_Item_Handler(active_menu, selection, false);
  DWIN_UpdateLCD();
}

void CrealityDWINClass::Value_Control() {
  ENCODER_DiffState encoder_diffState = Encoder_ReceiveAnalyze();
  if (encoder_diffState == ENCODER_DIFF_NO) return;
  if (encoder_diffState == ENCODER_DIFF_CW)
    tempvalue += EncoderRate.encoderMoveValue;
  else if (encoder_diffState == ENCODER_DIFF_CCW)
    tempvalue -= EncoderRate.encoderMoveValue;
  else if (encoder_diffState == ENCODER_DIFF_ENTER) {
    process = Menu;
    EncoderRate.enabled = false;
    Draw_Float(tempvalue / valueunit, selection - scrollpos, false, valueunit);
    DWIN_UpdateLCD();
    if (active_menu == ZOffset && liveadjust) {
      planner.synchronize();
      current_position.z += (tempvalue / valueunit - zoffsetvalue);
      planner.buffer_line(current_position, homing_feedrate(Z_AXIS), active_extruder);
      current_position.z = 0;
      sync_plan_position();
    }
    else if (active_menu == Tune && selection == TUNE_ZOFFSET) {
      sprintf_P(cmd, PSTR("M290 Z%s"), dtostrf((tempvalue / valueunit - zoffsetvalue), 1, 3, str_1));
      gcode.process_subcommands_now_P(cmd);
    }
    if (TERN0(HAS_HOTEND, valuepointer == &thermalManager.temp_hotend[0].pid.Ki) || TERN0(HAS_HEATED_BED, valuepointer == &thermalManager.temp_bed.pid.Ki))
      tempvalue = scalePID_i(tempvalue);
    if (TERN0(HAS_HOTEND, valuepointer == &thermalManager.temp_hotend[0].pid.Kd) || TERN0(HAS_HEATED_BED, valuepointer == &thermalManager.temp_bed.pid.Kd))
      tempvalue = scalePID_d(tempvalue);
    switch (valuetype) {
      case 0: *(float*)valuepointer = tempvalue / valueunit; break;
      case 1: *(uint8_t*)valuepointer = tempvalue / valueunit; break;
      case 2: *(uint16_t*)valuepointer = tempvalue / valueunit; break;
      case 3: *(int16_t*)valuepointer = tempvalue / valueunit; break;
      case 4: *(uint32_t*)valuepointer = tempvalue / valueunit; break;
      case 5: *(int8_t*)valuepointer = tempvalue / valueunit; break;
    }
    switch (active_menu) {
      case Move:
        planner.synchronize();
        planner.buffer_line(current_position, manual_feedrate_mm_s[selection - 1], active_extruder);
        break;
      #if HAS_MESH
        case ManualMesh:
          planner.synchronize();
          planner.buffer_line(current_position, homing_feedrate(Z_AXIS), active_extruder);
          planner.synchronize();
          break;
        case UBLMesh:     mesh_conf.manual_move(true); break;
        case LevelManual: mesh_conf.manual_move(selection == LEVELING_M_OFFSET); break;
      #endif
    }
    if (valuepointer == &planner.flow_percentage[0])
      planner.refresh_e_factor(0);
    if (funcpointer) funcpointer();
    return;
  }
  NOLESS(tempvalue, (valuemin * valueunit));
  NOMORE(tempvalue, (valuemax * valueunit));
  Draw_Float(tempvalue / valueunit, selection - scrollpos, true, valueunit);
  DWIN_UpdateLCD();
  if (active_menu == Move && livemove) {
    *(float*)valuepointer = tempvalue / valueunit;
    planner.buffer_line(current_position, manual_feedrate_mm_s[selection - 1], active_extruder);
  }
}

void CrealityDWINClass::Option_Control() {
  ENCODER_DiffState encoder_diffState = Encoder_ReceiveAnalyze();
  if (encoder_diffState == ENCODER_DIFF_NO) return;
  if (encoder_diffState == ENCODER_DIFF_CW)
    tempvalue += EncoderRate.encoderMoveValue;
  else if (encoder_diffState == ENCODER_DIFF_CCW)
    tempvalue -= EncoderRate.encoderMoveValue;
  else if (encoder_diffState == ENCODER_DIFF_ENTER) {
    process = Menu;
    EncoderRate.enabled = false;
    if (valuepointer == &color_names) {
      switch (selection) {
        case COLORSETTINGS_CURSOR: eeprom_settings.cursor_color = tempvalue; break;
        case COLORSETTINGS_SPLIT_LINE: eeprom_settings.menu_split_line = tempvalue; break;
        case COLORSETTINGS_MENU_TOP_BG: eeprom_settings.menu_top_bg = tempvalue; break;
        case COLORSETTINGS_MENU_TOP_TXT: eeprom_settings.menu_top_txt = tempvalue; break;
        case COLORSETTINGS_HIGHLIGHT_BORDER: eeprom_settings.highlight_box = tempvalue; break;
        case COLORSETTINGS_PROGRESS_PERCENT: eeprom_settings.progress_percent = tempvalue; break;
        case COLORSETTINGS_PROGRESS_TIME: eeprom_settings.progress_time = tempvalue; break;
        case COLORSETTINGS_PROGRESS_STATUS_BAR: eeprom_settings.status_bar_text = tempvalue; break;
        case COLORSETTINGS_PROGRESS_STATUS_AREA: eeprom_settings.status_area_text = tempvalue; break;
        case COLORSETTINGS_PROGRESS_COORDINATES: eeprom_settings.coordinates_text = tempvalue; break;
        case COLORSETTINGS_PROGRESS_COORDINATES_LINE: eeprom_settings.coordinates_split_line = tempvalue; break;
      }
      Redraw_Screen();
    }
    else if (valuepointer == &preheat_modes)
      preheatmode = tempvalue;

    Draw_Option(tempvalue, static_cast<const char * const *>(valuepointer), selection - scrollpos, false, (valuepointer == &color_names));
    DWIN_UpdateLCD();
    return;
  }
  NOLESS(tempvalue, valuemin);
  NOMORE(tempvalue, valuemax);
  Draw_Option(tempvalue, static_cast<const char * const *>(valuepointer), selection - scrollpos, true);
  DWIN_UpdateLCD();
}

void CrealityDWINClass::File_Control() {
  ENCODER_DiffState encoder_diffState = Encoder_ReceiveAnalyze();
  static uint8_t filescrl = 0;
  if (encoder_diffState == ENCODER_DIFF_NO) {
    if (selection > 0) {
      card.getfilename_sorted(SD_ORDER(selection - 1, card.get_num_Files()));
      char * const filename = card.longest_filename();
      size_t len = strlen(filename);
      int8_t pos = len;
      if (!card.flag.filenameIsDir)
        while (pos && filename[pos] != '.') pos--;
      if (pos > MENU_CHAR_LIMIT) {
        static millis_t time = 0;
        if (PENDING(millis(), time)) return;
        time = millis() + 200;
        pos -= filescrl;
        len = _MIN(pos, MENU_CHAR_LIMIT);
        char name[len + 1];
        if (pos >= 0) {
          LOOP_L_N(i, len) name[i] = filename[i + filescrl];
        }
        else {
          LOOP_L_N(i, MENU_CHAR_LIMIT + pos) name[i] = ' ';
          LOOP_S_L_N(i, MENU_CHAR_LIMIT + pos, MENU_CHAR_LIMIT) name[i] = filename[i - (MENU_CHAR_LIMIT + pos)];
        }
        name[len] = '\0';
        DWIN_Draw_Rectangle(1, Color_Bg_Black, LBLX, MBASE(selection - scrollpos) - 14, 271, MBASE(selection - scrollpos) + 28);
        Draw_Menu_Item(selection - scrollpos, card.flag.filenameIsDir ? ICON_More : ICON_File, name);
        if (-pos >= MENU_CHAR_LIMIT) filescrl = 0;
        filescrl++;
        DWIN_UpdateLCD();
      }
    }
    return;
  }
  if (encoder_diffState == ENCODER_DIFF_CW && selection < card.get_num_Files()) {
    DWIN_Draw_Rectangle(1, Color_Bg_Black, 0, MBASE(selection - scrollpos) - 18, 14, MBASE(selection - scrollpos) + 33);
    if (selection > 0) {
      DWIN_Draw_Rectangle(1, Color_Bg_Black, LBLX, MBASE(selection - scrollpos) - 14, 271, MBASE(selection - scrollpos) + 28);
      Draw_SD_Item(selection, selection - scrollpos);
    }
    filescrl = 0;
    selection++; // Select Down
    if (selection > scrollpos + MROWS) {
      scrollpos++;
      DWIN_Frame_AreaMove(1, 2, MLINE, Color_Bg_Black, 0, 31, DWIN_WIDTH, 349);
      Draw_SD_Item(selection, selection - scrollpos);
    }
    DWIN_Draw_Rectangle(1, GetColor(eeprom_settings.cursor_color, Rectangle_Color), 0, MBASE(selection - scrollpos) - 18, 14, MBASE(selection - scrollpos) + 33);
  }
  else if (encoder_diffState == ENCODER_DIFF_CCW && selection > 0) {
    DWIN_Draw_Rectangle(1, Color_Bg_Black, 0, MBASE(selection - scrollpos) - 18, 14, MBASE(selection - scrollpos) + 33);
    DWIN_Draw_Rectangle(1, Color_Bg_Black, LBLX, MBASE(selection - scrollpos) - 14, 271, MBASE(selection - scrollpos) + 28);
    Draw_SD_Item(selection, selection - scrollpos);
    filescrl = 0;
    selection--; // Select Up
    if (selection < scrollpos) {
      scrollpos--;
      DWIN_Frame_AreaMove(1, 3, MLINE, Color_Bg_Black, 0, 31, DWIN_WIDTH, 349);
      Draw_SD_Item(selection, selection - scrollpos);
    }
    DWIN_Draw_Rectangle(1, GetColor(eeprom_settings.cursor_color, Rectangle_Color), 0, MBASE(selection - scrollpos) - 18, 14, MBASE(selection - scrollpos) + 33);
  }
  else if (encoder_diffState == ENCODER_DIFF_ENTER) {
    if (selection == 0) {
      if (card.flag.workDirIsRoot) {
        process = Main;
        Draw_Main_Menu();
      }
      else {
        card.cdup();
        Draw_SD_List();
      }
    }
    else {
      card.getfilename_sorted(SD_ORDER(selection - 1, card.get_num_Files()));
      if (card.flag.filenameIsDir) {
        card.cd(card.filename);
        Draw_SD_List();
      }
      else {
        card.openAndPrintFile(card.filename);
      }
    }
  }
  DWIN_UpdateLCD();
}

void CrealityDWINClass::Print_Screen_Control() {
  ENCODER_DiffState encoder_diffState = Encoder_ReceiveAnalyze();
  if (encoder_diffState == ENCODER_DIFF_NO) return;
  if (encoder_diffState == ENCODER_DIFF_CW && selection < 2) {
    selection++; // Select Down
    Print_Screen_Icons();
  }
  else if (encoder_diffState == ENCODER_DIFF_CCW && selection > 0) {
    selection--; // Select Up
    Print_Screen_Icons();
  }
  else if (encoder_diffState == ENCODER_DIFF_ENTER) {
    switch (selection) {
      case 0:
        Draw_Menu(Tune);
        Update_Status_Bar(true);
        break;
      case 1:
        if (paused) {
          if (sdprint) {
            wait_for_user = false;
            #if ENABLED(PARK_HEAD_ON_PAUSE)
              card.startOrResumeFilePrinting();
              TERN_(POWER_LOSS_RECOVERY, recovery.prepare());
            #else
              char cmnd[20];
              #if HAS_HEATED_BED
                cmnd[sprintf_P(cmnd, PSTR("M140 S%i"), pausebed)] = '\0';
                gcode.process_subcommands_now_P(PSTR(cmnd));
              #endif
              #if HAS_EXTRUDERS
                cmnd[sprintf_P(cmnd, PSTR("M109 S%i"), pausetemp)] = '\0';
                gcode.process_subcommands_now_P(PSTR(cmnd));
              #endif
              TERN_(HAS_FAN, thermalManager.fan_speed[0] = pausefan);
              planner.synchronize();
              TERN_(SDSUPPORT, queue.inject_P(PSTR("M24")));
            #endif
          }
          else {
            TERN_(HOST_ACTION_COMMANDS, host_action_resume());
          }
          Draw_Print_Screen();
        }
        else
          Popup_Handler(Pause);
        break;
      case 2:
        Popup_Handler(Stop);
        break;
    }
  }
  DWIN_UpdateLCD();
}

void CrealityDWINClass::Popup_Control() {
  ENCODER_DiffState encoder_diffState = Encoder_ReceiveAnalyze();
  if (encoder_diffState == ENCODER_DIFF_NO) return;
  if (encoder_diffState == ENCODER_DIFF_CW && selection < 1) {
    selection++;
    Popup_Select();
  }
  else if (encoder_diffState == ENCODER_DIFF_CCW && selection > 0) {
    selection--;
    Popup_Select();
  }
  else if (encoder_diffState == ENCODER_DIFF_ENTER) {
    switch (popup) {
      case Pause:
        if (selection == 0) {
          if (sdprint) {
            #if ENABLED(POWER_LOSS_RECOVERY)
              if (recovery.enabled) recovery.save(true);
            #endif
            #if ENABLED(PARK_HEAD_ON_PAUSE)
              Popup_Handler(Home, true);
              #if ENABLED(SDSUPPORT)
                if (IS_SD_PRINTING()) card.pauseSDPrint();
              #endif
              planner.synchronize();
              queue.inject_P(PSTR("M125"));
              planner.synchronize();
            #else
              queue.inject_P(PSTR("M25"));
              TERN_(HAS_HOTEND, pausetemp = thermalManager.temp_hotend[0].target);
              TERN_(HAS_HEATED_BED, pausebed = thermalManager.temp_bed.target);
              TERN_(HAS_FAN, pausefan = thermalManager.fan_speed[0]);
              thermalManager.disable_all_heaters();
              TERN_(HAS_FAN, thermalManager.zero_fan_speeds());
            #endif
          }
          else {
            TERN_(HOST_ACTION_COMMANDS, host_action_pause());
          }
        }
        Draw_Print_Screen();
        break;
      case Stop:
        if (selection == 0) {
          if (sdprint) {
            ui.abort_print();
            TERN_(HAS_FAN, thermalManager.zero_fan_speeds());
            thermalManager.disable_all_heaters();
          }
          else {
            TERN_(HOST_ACTION_COMMANDS, host_action_cancel());
          }
        }
        else
          Draw_Print_Screen();
        break;
      case Resume:
        if (selection == 0)
          queue.inject_P(PSTR("M1000"));
        else {
          queue.inject_P(PSTR("M1000 C"));
          Draw_Main_Menu();
        }
        break;

      #if HAS_HOTEND
        case ETemp:
          if (selection == 0) {
            thermalManager.setTargetHotend(EXTRUDE_MINTEMP, 0);
            thermalManager.set_fan_speed(0, MAX_FAN_SPEED);
            Draw_Menu(PreheatHotend);
          }
          else
            Redraw_Menu(true, true, false);
          break;
      #endif

      #if HAS_BED_PROBE
        case ManualProbing:
          if (selection == 0) {
            char buf[80];
            const float dif = probe.probe_at_point(current_position.x, current_position.y, PROBE_PT_STOW, 0, false) - corner_avg;
            sprintf_P(buf, dif > 0 ? PSTR("Corner is %smm high") : PSTR("Corner is %smm low"), dtostrf(abs(dif), 1, 3, str_1));
            Update_Status(buf);
          }
          else {
            Redraw_Menu(true, true, false);
            Update_Status("");
          }
          break;
      #endif

      #if ENABLED(ADVANCED_PAUSE_FEATURE)
        case ConfFilChange:
          if (selection == 0) {
            if (thermalManager.temp_hotend[0].target < thermalManager.extrude_min_temp)
              Popup_Handler(ETemp);
            else {
              if (thermalManager.temp_hotend[0].celsius < thermalManager.temp_hotend[0].target - 2) {
                Popup_Handler(Heating);
                thermalManager.wait_for_hotend(0);
              }
              Popup_Handler(FilChange);
              sprintf_P(cmd, PSTR("M600 B1 R%i"), thermalManager.temp_hotend[0].target);
              gcode.process_subcommands_now_P(cmd);
            }
          }
          else
            Redraw_Menu(true, true, false);
          break;
        case PurgeMore:
          if (selection == 0) {
            pause_menu_response = PAUSE_RESPONSE_EXTRUDE_MORE;
            Popup_Handler(FilChange);
          }
          else {
            pause_menu_response = PAUSE_RESPONSE_RESUME_PRINT;
            if (printing) Popup_Handler(Resuming);
            else Redraw_Menu(true, true, (active_menu==PreheatHotend));
          }
          break;
      #endif // ADVANCED_PAUSE_FEATURE

      #if HAS_MESH
        case SaveLevel:
          if (selection == 0) {
            #if ENABLED(AUTO_BED_LEVELING_UBL)
              gcode.process_subcommands_now_P(PSTR("G29 S"));
              planner.synchronize();
              AudioFeedback(true);
            #else
              AudioFeedback(settings.save());
            #endif
          }
          Draw_Menu(Leveling, LEVELING_GET_MESH);
          break;
      #endif

      #if ENABLED(AUTO_BED_LEVELING_UBL)
        case MeshSlot:
          if (selection == 0) ubl.storage_slot = 0;
          Redraw_Menu(true, true);
          break;
      #endif
      default: break;
    }
  }
  DWIN_UpdateLCD();
}

void CrealityDWINClass::Confirm_Control() {
  ENCODER_DiffState encoder_diffState = Encoder_ReceiveAnalyze();
  if (encoder_diffState == ENCODER_DIFF_NO) return;
  if (encoder_diffState == ENCODER_DIFF_ENTER) {
    switch (popup) {
      case Complete:
        Draw_Main_Menu();
        break;
      case FilInsert:
        Popup_Handler(FilChange);
        wait_for_user = false;
        break;
      case HeaterTime:
        Popup_Handler(Heating);
        wait_for_user = false;
        break;
      default:
        Redraw_Menu(true, true, false);
        wait_for_user = false;
        break;
    }
  }
  DWIN_UpdateLCD();
}

/* In-Menu Value Modification */

void CrealityDWINClass::Setup_Value(float value, float min, float max, float unit, uint8_t type) {
  if (TERN0(HAS_HOTEND, valuepointer == &thermalManager.temp_hotend[0].pid.Ki) || TERN0(HAS_HEATED_BED, valuepointer == &thermalManager.temp_bed.pid.Ki))
    tempvalue = unscalePID_i(value) * unit;
  else if (TERN0(HAS_HOTEND, valuepointer == &thermalManager.temp_hotend[0].pid.Kd) || TERN0(HAS_HEATED_BED, valuepointer == &thermalManager.temp_bed.pid.Kd))
    tempvalue = unscalePID_d(value) * unit;
  else
    tempvalue = value * unit;
  valuemin = min;
  valuemax = max;
  valueunit = unit;
  valuetype = type;
  process = Value;
  EncoderRate.enabled = true;
  Draw_Float(tempvalue / unit, selection - scrollpos, true, valueunit);
}

void CrealityDWINClass::Modify_Value(float &value, float min, float max, float unit, void (*f)()/*=nullptr*/) {
  valuepointer = &value;
  funcpointer = f;
  Setup_Value((float)value, min, max, unit, 0);
}
void CrealityDWINClass::Modify_Value(uint8_t &value, float min, float max, float unit, void (*f)()/*=nullptr*/) {
  valuepointer = &value;
  funcpointer = f;
  Setup_Value((float)value, min, max, unit, 1);
}
void CrealityDWINClass::Modify_Value(uint16_t &value, float min, float max, float unit, void (*f)()/*=nullptr*/) {
  valuepointer = &value;
  funcpointer = f;
  Setup_Value((float)value, min, max, unit, 2);
}
void CrealityDWINClass::Modify_Value(int16_t &value, float min, float max, float unit, void (*f)()/*=nullptr*/) {
  valuepointer = &value;
  funcpointer = f;
  Setup_Value((float)value, min, max, unit, 3);
}
void CrealityDWINClass::Modify_Value(uint32_t &value, float min, float max, float unit, void (*f)()/*=nullptr*/) {
  valuepointer = &value;
  funcpointer = f;
  Setup_Value((float)value, min, max, unit, 4);
}
void CrealityDWINClass::Modify_Value(int8_t &value, float min, float max, float unit, void (*f)()/*=nullptr*/) {
  valuepointer = &value;
  funcpointer = f;
  Setup_Value((float)value, min, max, unit, 5);
}

void CrealityDWINClass::Modify_Option(uint8_t value, const char * const * options, uint8_t max) {
  tempvalue = value;
  valuepointer = const_cast<const char * *>(options);
  valuemin = 0;
  valuemax = max;
  process = Option;
  EncoderRate.enabled = true;
  Draw_Option(value, options, selection - scrollpos, true);
}

/* Main Functions */

void CrealityDWINClass::Update_Status(const char * const text) {
  char header[4];
  LOOP_L_N(i, 3) header[i] = text[i];
  header[3] = '\0';
  if (strcmp_P(header,"<F>") == 0) {
    LOOP_L_N(i, _MIN((size_t)LONG_FILENAME_LENGTH, strlen(text))) filename[i] = text[i + 3];
    filename[_MIN((size_t)LONG_FILENAME_LENGTH - 1, strlen(text))] = '\0';
    Draw_Print_Filename(true);
  }
  else {
    LOOP_L_N(i, _MIN((size_t)64, strlen(text))) statusmsg[i] = text[i];
    statusmsg[_MIN((size_t)64, strlen(text))] = '\0';
  }
}

void CrealityDWINClass::Start_Print(bool sd) {
  sdprint = sd;
  if (!printing) {
    printing = true;
    statusmsg[0] = '\0';
    if (sd) {
      if (recovery.valid()) {
        SdFile *diveDir = nullptr;
        const char * const fname = card.diveToFile(true, diveDir, recovery.info.sd_filename);
        card.selectFileByName(fname);
      }
      strcpy_P(filename, card.longest_filename());
    }
    else
      strcpy_P(filename, "Host Print");
    TERN_(LCD_SET_PROGRESS_MANUALLY, ui.set_progress(0));
    TERN_(USE_M73_REMAINING_TIME, ui.set_remaining_time(0));
    Draw_Print_Screen();
  }
}

void CrealityDWINClass::Stop_Print() {
  printing = false;
  sdprint = false;
  TERN_(HAS_FAN, thermalManager.zero_fan_speeds());
  thermalManager.disable_all_heaters();
  TERN_(LCD_SET_PROGRESS_MANUALLY, ui.set_progress(100 * (PROGRESS_SCALE)));
  TERN_(USE_M73_REMAINING_TIME, ui.set_remaining_time(0));
  Draw_Print_confirm();
}

void CrealityDWINClass::Update() {
  State_Update();
  Screen_Update();
  switch (process) {
    case Main:    Main_Menu_Control();    break;
    case Menu:    Menu_Control();         break;
    case Value:   Value_Control();        break;
    case Option:  Option_Control();       break;
    case File:    File_Control();         break;
    case Print:   Print_Screen_Control(); break;
    case Popup:   Popup_Control();        break;
    case Confirm: Confirm_Control();      break;
  }
}

void MarlinUI::update() { CrealityDWIN.Update(); }

void CrealityDWINClass::State_Update() {
  if ((print_job_timer.isRunning() || print_job_timer.isPaused()) != printing) {
    if (!printing) Start_Print((card.isFileOpen() || recovery.valid()));
    else Stop_Print();
  }
  if (print_job_timer.isPaused() != paused) {
    paused = print_job_timer.isPaused();
    if (process == Print) Print_Screen_Icons();
    if (process == Wait && !paused) Redraw_Menu(true, true);
  }
  if (wait_for_user && !(process == Confirm) && !print_job_timer.isPaused())
    Confirm_Handler(UserInput);
  #if ENABLED(ADVANCED_PAUSE_FEATURE)
    if (process == Popup && popup == PurgeMore) {
      if (pause_menu_response == PAUSE_RESPONSE_EXTRUDE_MORE)
        Popup_Handler(FilChange);
      else if (pause_menu_response == PAUSE_RESPONSE_RESUME_PRINT) {
        if (printing) Popup_Handler(Resuming);
        else Redraw_Menu(true, true, (active_menu==PreheatHotend));
      }
    }
  #endif
  #if ENABLED(FILAMENT_RUNOUT_SENSOR)
    static bool ranout = false;
    if (runout.filament_ran_out != ranout) {
      ranout = runout.filament_ran_out;
      if (ranout) Popup_Handler(Runout);
    }
  #endif
}

void CrealityDWINClass::Screen_Update() {
  static millis_t scrltime = 0;
  if (ELAPSED(millis(), scrltime)) {
    scrltime = millis() + 200;
    Update_Status_Bar();
    if (process == Print) Draw_Print_Filename();
  }

  static millis_t statustime = 0;
  if (ELAPSED(millis(), statustime)) {
    statustime = millis() + 500;
    Draw_Status_Area();
  }

  static millis_t printtime = 0;
  if (ELAPSED(millis(), printtime)) {
    printtime = millis() + 1000;
    if (process == Print) {
      Draw_Print_ProgressBar();
      Draw_Print_ProgressElapsed();
      TERN_(USE_M73_REMAINING_TIME, Draw_Print_ProgressRemain());
    }
  }

  static bool mounted = card.isMounted();
  if (mounted != card.isMounted()) {
    mounted = card.isMounted();
    if (process == File)
      Draw_SD_List();
  }

  #if HAS_HOTEND
    static int16_t hotendtarget = -1;
  #endif
  #if HAS_HEATED_BED
    static int16_t bedtarget = -1;
  #endif
  #if HAS_FAN
    static int16_t fanspeed = -1;
  #endif

  #if HAS_ZOFFSET_ITEM
    static float lastzoffset = zoffsetvalue;
    if (zoffsetvalue != lastzoffset) {
      lastzoffset = zoffsetvalue;
      #if HAS_BED_PROBE
        probe.offset.z = zoffsetvalue;
      #else
        set_home_offset(Z_AXIS, -zoffsetvalue);
      #endif
    }

    #if HAS_BED_PROBE
      if (probe.offset.z != lastzoffset)
        zoffsetvalue = lastzoffset = probe.offset.z;
    #else
      if (-home_offset.z != lastzoffset)
        zoffsetvalue = lastzoffset = -home_offset.z;
    #endif
  #endif // HAS_ZOFFSET_ITEM

  if (process == Menu || process == Value) {
    switch (active_menu) {
      case TempMenu:
        #if HAS_HOTEND
          if (thermalManager.temp_hotend[0].target != hotendtarget) {
            hotendtarget = thermalManager.temp_hotend[0].target;
            if (scrollpos <= TEMP_HOTEND && TEMP_HOTEND <= scrollpos + MROWS) {
              if (process != Value || selection != TEMP_HOTEND - scrollpos)
                Draw_Float(thermalManager.temp_hotend[0].target, TEMP_HOTEND - scrollpos, false, 1);
            }
          }
        #endif
        #if HAS_HEATED_BED
          if (thermalManager.temp_bed.target != bedtarget) {
            bedtarget = thermalManager.temp_bed.target;
            if (scrollpos <= TEMP_BED && TEMP_BED <= scrollpos + MROWS) {
              if (process != Value || selection != TEMP_HOTEND - scrollpos)
                Draw_Float(thermalManager.temp_bed.target, TEMP_BED - scrollpos, false, 1);
            }
          }
        #endif
        #if HAS_FAN
          if (thermalManager.fan_speed[0] != fanspeed) {
            fanspeed = thermalManager.fan_speed[0];
            if (scrollpos <= TEMP_FAN && TEMP_FAN <= scrollpos + MROWS) {
              if (process != Value || selection != TEMP_HOTEND - scrollpos)
                Draw_Float(thermalManager.fan_speed[0], TEMP_FAN - scrollpos, false, 1);
            }
          }
        #endif
        break;
      case Tune:
        #if HAS_HOTEND
          if (thermalManager.temp_hotend[0].target != hotendtarget) {
            hotendtarget = thermalManager.temp_hotend[0].target;
            if (scrollpos <= TUNE_HOTEND && TUNE_HOTEND <= scrollpos + MROWS) {
              if (process != Value || selection != TEMP_HOTEND - scrollpos)
                Draw_Float(thermalManager.temp_hotend[0].target, TUNE_HOTEND - scrollpos, false, 1);
            }
          }
        #endif
        #if HAS_HEATED_BED
          if (thermalManager.temp_bed.target != bedtarget) {
            bedtarget = thermalManager.temp_bed.target;
            if (scrollpos <= TUNE_BED && TUNE_BED <= scrollpos + MROWS) {
              if (process != Value || selection != TEMP_HOTEND - scrollpos)
                Draw_Float(thermalManager.temp_bed.target, TUNE_BED - scrollpos, false, 1);
            }
          }
        #endif
        #if HAS_FAN
          if (thermalManager.fan_speed[0] != fanspeed) {
            fanspeed = thermalManager.fan_speed[0];
            if (scrollpos <= TUNE_FAN && TUNE_FAN <= scrollpos + MROWS) {
              if (process != Value || selection != TEMP_HOTEND - scrollpos)
                Draw_Float(thermalManager.fan_speed[0], TUNE_FAN - scrollpos, false, 1);
            }
          }
        #endif
        break;
    }
  }
}

void CrealityDWINClass::AudioFeedback(const bool success/*=true*/) {
  if (success) {
    if (eeprom_settings.beeperenable) {
      BUZZ(100, 659);
      BUZZ( 10,   0);
      BUZZ(100, 698);
    }
    else Update_Status("Success");
  }
  else if (eeprom_settings.beeperenable)
    BUZZ(40, 440);
  else
    Update_Status("Failed");
}

void CrealityDWINClass::Save_Settings(char *buff) {
  TERN_(AUTO_BED_LEVELING_UBL, eeprom_settings.tilt_grid_size = mesh_conf.tilt_grid - 1);
  eeprom_settings.corner_pos = corner_pos * 10;
  memcpy(buff, &eeprom_settings, min(sizeof(eeprom_settings), eeprom_data_size));
}

void CrealityDWINClass::Load_Settings(const char *buff) {
  memcpy(&eeprom_settings, buff, min(sizeof(eeprom_settings), eeprom_data_size));
  TERN_(AUTO_BED_LEVELING_UBL, mesh_conf.tilt_grid = eeprom_settings.tilt_grid_size + 1);
  if (eeprom_settings.corner_pos == 0) eeprom_settings.corner_pos = 325;
  corner_pos = eeprom_settings.corner_pos / 10.0f;
  Redraw_Screen();
  #if ENABLED(POWER_LOSS_RECOVERY)
    static bool init = true;
    if (init) {
      init = false;
      queue.inject_P(PSTR("M1000 S"));
    }
  #endif
}

void CrealityDWINClass::Reset_Settings() {
  eeprom_settings.time_format_textual = false;
  eeprom_settings.beeperenable = true;
  TERN_(AUTO_BED_LEVELING_UBL, eeprom_settings.tilt_grid_size = 0);
  eeprom_settings.corner_pos = 325;
  eeprom_settings.cursor_color = 0;
  eeprom_settings.menu_split_line = 0;
  eeprom_settings.menu_top_bg = 0;
  eeprom_settings.menu_top_txt = 0;
  eeprom_settings.highlight_box = 0;
  eeprom_settings.progress_percent = 0;
  eeprom_settings.progress_time = 0;
  eeprom_settings.status_bar_text = 0;
  eeprom_settings.status_area_text = 0;
  eeprom_settings.coordinates_text = 0;
  eeprom_settings.coordinates_split_line = 0;
  TERN_(AUTO_BED_LEVELING_UBL, mesh_conf.tilt_grid = eeprom_settings.tilt_grid_size + 1);
  corner_pos = eeprom_settings.corner_pos / 10.0f;
  Redraw_Screen();
}

void MarlinUI::init() {
  delay(800);
  SERIAL_ECHOPGM("\nDWIN handshake ");
  if (DWIN_Handshake()) SERIAL_ECHOLNPGM("ok."); else SERIAL_ECHOLNPGM("error.");
  DWIN_Frame_SetDir(1); // Orientation 90°
  DWIN_UpdateLCD();     // Show bootscreen (first image)
  Encoder_Configuration();
  for (uint16_t t = 0; t <= 100; t += 2) {
    DWIN_ICON_Show(ICON, ICON_Bar, 15, 260);
    DWIN_Draw_Rectangle(1, Color_Bg_Black, 15 + t * 242 / 100, 260, 257, 280);
    DWIN_UpdateLCD();
    delay(20);
  }
  DWIN_JPG_CacheTo1(Language_English);
  CrealityDWIN.Redraw_Screen();
}

#if ENABLED(ADVANCED_PAUSE_FEATURE)
  void MarlinUI::pause_show_message(const PauseMessage message, const PauseMode mode/*=PAUSE_MODE_SAME*/, const uint8_t extruder/*=active_extruder*/) {
    switch (message) {
      case PAUSE_MESSAGE_INSERT:  CrealityDWIN.Confirm_Handler(FilInsert);  break;
      case PAUSE_MESSAGE_OPTION:  CrealityDWIN.Popup_Handler(PurgeMore);    break;
      case PAUSE_MESSAGE_HEAT:    CrealityDWIN.Confirm_Handler(HeaterTime); break;
      case PAUSE_MESSAGE_WAITING: CrealityDWIN.Draw_Print_Screen();         break;
      default: break;
    }
  }
#endif

#endif // DWIN_CREALITY_LCD_JYERSUI