Marlin 2.0 for Flying Bear 4S/5
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

248 lines
14 KiB

/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* Polish
*
* LCD Menu Messages
* See also https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language
*
*/
#ifndef LANGUAGE_PL_H
#define LANGUAGE_PL_H
#define DISPLAY_CHARSET_ISO10646_1
#define WELCOME_MSG MACHINE_NAME _UxGT(" gotowy.")
#define MSG_SD_INSERTED _UxGT("Karta wlozona")
#define MSG_SD_REMOVED _UxGT("Karta usunieta")
#define MSG_LCD_ENDSTOPS _UxGT("Krancow.") // Max length 8 characters
#define MSG_MAIN _UxGT("Menu glowne")
#define MSG_AUTOSTART _UxGT("Autostart")
#define MSG_DISABLE_STEPPERS _UxGT("Wylacz silniki")
#define MSG_AUTO_HOME _UxGT("Pozycja zerowa")
#define MSG_AUTO_HOME_X _UxGT("Home X")
#define MSG_AUTO_HOME_Y _UxGT("Home Y")
#define MSG_AUTO_HOME_Z _UxGT("Home Z")
#define MSG_LEVEL_BED_HOMING _UxGT("Pozycja zerowa")
#define MSG_LEVEL_BED_WAITING _UxGT("Kliknij by rozp.")
#define MSG_LEVEL_BED_NEXT_POINT _UxGT("Nastepny punkt")
#define MSG_LEVEL_BED_DONE _UxGT("Wypoziomowano!")
#define MSG_LEVEL_BED_CANCEL _UxGT("Anuluj")
#define MSG_SET_HOME_OFFSETS _UxGT("Ust. poz. zer.")
#define MSG_HOME_OFFSETS_APPLIED _UxGT("Poz. zerowa ust.")
#define MSG_SET_ORIGIN _UxGT("Ustaw punkt zero")
#define MSG_PREHEAT_1 _UxGT("Rozgrzej PLA")
#define MSG_PREHEAT_1_N MSG_PREHEAT_1 _UxGT(" ")
#define MSG_PREHEAT_1_ALL MSG_PREHEAT_1 _UxGT(" All")
#define MSG_PREHEAT_1_BEDONLY _UxGT("Rozgrzej stol PLA")
#define MSG_PREHEAT_1_SETTINGS _UxGT("Ustaw. rozg. PLA")
#define MSG_PREHEAT_2 _UxGT("Rozgrzej ABS")
#define MSG_PREHEAT_2_N MSG_PREHEAT_2 _UxGT(" ")
#define MSG_PREHEAT_2_ALL MSG_PREHEAT_2 _UxGT(" All")
#define MSG_PREHEAT_2_BEDONLY _UxGT("Rozgrzej stol ABS")
#define MSG_PREHEAT_2_SETTINGS _UxGT("Ustaw. rozg. ABS")
#define MSG_COOLDOWN _UxGT("Chlodzenie")
#define MSG_SWITCH_PS_ON _UxGT("Wlacz zasilacz")
#define MSG_SWITCH_PS_OFF _UxGT("Wylacz zasilacz")
#define MSG_EXTRUDE _UxGT("Ekstruzja")
#define MSG_RETRACT _UxGT("Wycofanie")
#define MSG_MOVE_AXIS _UxGT("Ruch osi")
#define MSG_LEVEL_BED _UxGT("Poziom. stolu")
#define MSG_MOVE_X _UxGT("Przesun w X")
#define MSG_MOVE_Y _UxGT("Przesun w Y")
#define MSG_MOVE_Z _UxGT("Przesun w Z")
#define MSG_MOVE_E _UxGT("Ekstruzja (os E)")
#define MSG_MOVE_01MM _UxGT("Przesun co .1mm")
#define MSG_MOVE_1MM _UxGT("Przesun co 1mm")
#define MSG_MOVE_10MM _UxGT("Przesun co 10mm")
#define MSG_SPEED _UxGT("Predkosc")
#define MSG_BED_Z _UxGT("Stol Z")
#define MSG_NOZZLE _UxGT("Dysza")
#define MSG_BED _UxGT("Stol")
#define MSG_FAN_SPEED _UxGT("Obroty wiatraka")
#define MSG_FLOW _UxGT("Przeplyw")
#define MSG_CONTROL _UxGT("Ustawienia")
#define MSG_MIN LCD_STR_THERMOMETER _UxGT(" Min")
#define MSG_MAX LCD_STR_THERMOMETER _UxGT(" Max")
#define MSG_FACTOR LCD_STR_THERMOMETER _UxGT(" Mnoznik")
#define MSG_AUTOTEMP _UxGT("Auto. temperatura")
#define MSG_ON _UxGT("Wl. ")
#define MSG_OFF _UxGT("Wyl.")
#define MSG_PID_P _UxGT("PID-P")
#define MSG_PID_I _UxGT("PID-I")
#define MSG_PID_D _UxGT("PID-D")
#define MSG_PID_C _UxGT("PID-C")
#define MSG_SELECT _UxGT("Select")
#define MSG_ACC _UxGT("Przyspieszenie")
#define MSG_VX_JERK _UxGT("Zryw Vx")
#define MSG_VY_JERK _UxGT("Zryw Vy")
#define MSG_VZ_JERK _UxGT("Zryw Vz")
#define MSG_VE_JERK _UxGT("Zryw Ve")
#define MSG_VMAX _UxGT("Vmax ")
#define MSG_VMIN _UxGT("Vmin")
#define MSG_VTRAV_MIN _UxGT("Vskok min")
#define MSG_AMAX _UxGT("Amax")
#define MSG_A_RETRACT _UxGT("A-wycofanie")
#define MSG_A_TRAVEL _UxGT("A-przesun.")
#define MSG_XSTEPS _UxGT("krokiX/mm")
#define MSG_YSTEPS _UxGT("krokiY/mm")
#define MSG_ZSTEPS _UxGT("krokiZ/mm")
#define MSG_ESTEPS _UxGT("krokiE/mm")
#define MSG_E1STEPS _UxGT("krokiE1/mm")
#define MSG_E2STEPS _UxGT("krokiE2/mm")
#define MSG_E3STEPS _UxGT("krokiE3/mm")
#define MSG_E4STEPS _UxGT("krokiE4/mm")
#define MSG_TEMPERATURE _UxGT("Temperatura")
#define MSG_MOTION _UxGT("Ruch")
#define MSG_VOLUMETRIC _UxGT("Filament")
#define MSG_VOLUMETRIC_ENABLED _UxGT("E w mm3")
#define MSG_FILAMENT_DIAM _UxGT("Śr. fil.")
#define MSG_CONTRAST _UxGT("Kontrast LCD")
#define MSG_STORE_EPROM _UxGT("Zapisz w pamieci")
#define MSG_LOAD_EPROM _UxGT("Wczytaj z pamieci")
#define MSG_RESTORE_FAILSAFE _UxGT("Ustaw. fabryczne")
#define MSG_REFRESH _UxGT("Odswiez")
#define MSG_WATCH _UxGT("Ekran glowny")
#define MSG_PREPARE _UxGT("Przygotuj")
#define MSG_TUNE _UxGT("Strojenie")
#define MSG_PAUSE_PRINT _UxGT("Pauza")
#define MSG_RESUME_PRINT _UxGT("Wznowienie")
#define MSG_STOP_PRINT _UxGT("Stop")
#define MSG_CARD_MENU _UxGT("Menu karty SD")
#define MSG_NO_CARD _UxGT("Brak karty")
#define MSG_DWELL _UxGT("Uspij...")
#define MSG_USERWAIT _UxGT("Oczekiwanie...")
#define MSG_RESUMING _UxGT("Wznawianie druku")
#define MSG_PRINT_ABORTED _UxGT("Druk przerwany")
#define MSG_NO_MOVE _UxGT("Brak ruchu")
#define MSG_KILLED _UxGT("Ubity. ")
#define MSG_STOPPED _UxGT("Zatrzymany. ")
#define MSG_CONTROL_RETRACT _UxGT("Wycofaj mm")
#define MSG_CONTROL_RETRACT_SWAP _UxGT("Z Wycof. mm")
#define MSG_CONTROL_RETRACTF _UxGT("Wycofaj V")
#define MSG_CONTROL_RETRACT_ZLIFT _UxGT("Skok Z mm")
#define MSG_CONTROL_RETRACT_RECOVER _UxGT("Cof. wycof. +mm")
#define MSG_CONTROL_RETRACT_RECOVER_SWAP _UxGT("Z Cof. wyc. +mm")
#define MSG_CONTROL_RETRACT_RECOVERF _UxGT("Cof. wycof. V")
#define MSG_AUTORETRACT _UxGT("Auto. wycofanie")
#define MSG_FILAMENTCHANGE _UxGT("Zmien filament")
#define MSG_INIT_SDCARD _UxGT("Inicjal. karty SD")
#define MSG_CNG_SDCARD _UxGT("Zmiana karty SD")
#define MSG_ZPROBE_OUT _UxGT("Sonda Z za stolem")
#define MSG_BLTOUCH_SELFTEST _UxGT("BLTouch Self-Test")
#define MSG_BLTOUCH_RESET _UxGT("Reset BLTouch")
#define MSG_HOME _UxGT("Home") // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST
#define MSG_FIRST _UxGT("first")
#define MSG_ZPROBE_ZOFFSET _UxGT("Offset Z")
#define MSG_BABYSTEP_X _UxGT("Babystep X")
#define MSG_BABYSTEP_Y _UxGT("Babystep Y")
#define MSG_BABYSTEP_Z _UxGT("Babystep Z")
#define MSG_ENDSTOP_ABORT _UxGT("Blad krancowki")
#define MSG_HEATING_FAILED_LCD _UxGT("Rozgrz. nieudane")
#define MSG_ERR_REDUNDANT_TEMP _UxGT("Blad temperatury")
#define MSG_THERMAL_RUNAWAY _UxGT("Zanik temp.")
#define MSG_ERR_MAXTEMP _UxGT("Err max temp")
#define MSG_ERR_MINTEMP _UxGT("Err min temp")
#define MSG_ERR_MAXTEMP_BED _UxGT("Err max temp stolu")
#define MSG_ERR_MINTEMP_BED _UxGT("Err min temp stolu")
#define MSG_ERR_Z_HOMING _UxGT("G28 Z Forbidden")
#define MSG_HALTED _UxGT("Drukarka zatrzym.")
#define MSG_PLEASE_RESET _UxGT("Prosze zresetowac")
#define MSG_SHORT_DAY _UxGT("d") // One character only
#define MSG_SHORT_HOUR _UxGT("g") // One character only
#define MSG_SHORT_MINUTE _UxGT("m") // One character only
#define MSG_HEATING _UxGT("Rozgrzewanie...")
#define MSG_HEATING_COMPLETE _UxGT("Rozgrzano")
#define MSG_BED_HEATING _UxGT("Rozgrzewanie stolu...")
#define MSG_BED_DONE _UxGT("Rozgrzano stol")
#define MSG_DELTA_CALIBRATE _UxGT("Kalibrowanie Delty")
#define MSG_DELTA_CALIBRATE_X _UxGT("Kalibruj X")
#define MSG_DELTA_CALIBRATE_Y _UxGT("Kalibruj Y")
#define MSG_DELTA_CALIBRATE_Z _UxGT("Kalibruj Z")
#define MSG_DELTA_CALIBRATE_CENTER _UxGT("Kalibruj środek")
#define MSG_INFO_MENU _UxGT("O drukarce")
#define MSG_INFO_PRINTER_MENU _UxGT("Info drukarki")
#define MSG_INFO_STATS_MENU _UxGT("Statystyki")
#define MSG_INFO_BOARD_MENU _UxGT("Board Info")
#define MSG_INFO_THERMISTOR_MENU _UxGT("Thermistory")
#define MSG_INFO_EXTRUDERS _UxGT("Ekstrudery")
#define MSG_INFO_BAUDRATE _UxGT("Prędkosc USB")
#define MSG_INFO_PROTOCOL _UxGT("Protokol")
#define MSG_LIGHTS_ON _UxGT("Oswietlenie wl.")
#define MSG_LIGHTS_OFF _UxGT("Oswietlenie wyl.")
#if LCD_WIDTH >= 20
#define MSG_INFO_PRINT_COUNT _UxGT("Wydrukowano")
#define MSG_INFO_COMPLETED_PRINTS _UxGT("Ukończono")
#define MSG_INFO_PRINT_TIME _UxGT("Czas druku")
#define MSG_INFO_PRINT_LONGEST _UxGT("Najdl. druk")
#define MSG_INFO_PRINT_FILAMENT _UxGT("Uzyty fil.")
#else
#define MSG_INFO_PRINT_COUNT _UxGT("Wydrukowano")
#define MSG_INFO_COMPLETED_PRINTS _UxGT("Ukonczono")
#define MSG_INFO_PRINT_TIME _UxGT("Razem")
#define MSG_INFO_PRINT_LONGEST _UxGT("Najdl. druk")
#define MSG_INFO_PRINT_FILAMENT _UxGT("Uzyty fil.")
#endif
#define MSG_INFO_MIN_TEMP _UxGT("Min Temp")
#define MSG_INFO_MAX_TEMP _UxGT("Max Temp")
#define MSG_INFO_PSU _UxGT("Zasilacz")
#define MSG_DRIVE_STRENGTH _UxGT("Siła silnika")
#define MSG_DAC_PERCENT _UxGT("Siła %")
#define MSG_DAC_EEPROM_WRITE _UxGT("Zapisz DAC EEPROM")
#define MSG_FILAMENT_CHANGE_HEADER _UxGT("ZMIEN FILAMENT")
#define MSG_FILAMENT_CHANGE_OPTION_HEADER _UxGT("ZMIEN OPCJE:")
#define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE _UxGT("Ekstruduj wiecej")
#define MSG_FILAMENT_CHANGE_OPTION_RESUME _UxGT("Wznow drukowanie")
#if LCD_HEIGHT >= 4
// Up to 3 lines allowed
#define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Czekam na ")
#define MSG_FILAMENT_CHANGE_INIT_2 _UxGT("zmiane filamentu")
#define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Czekam na")
#define MSG_FILAMENT_CHANGE_UNLOAD_2 _UxGT("wyjecie filamentu")
#define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Wloz filament")
#define MSG_FILAMENT_CHANGE_INSERT_2 _UxGT("i nacisnij przycisk")
#define MSG_FILAMENT_CHANGE_INSERT_3 _UxGT("aby kontynuowac...")
#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Czekam na")
#define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("wlozenie filamentu")
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 _UxGT("Czekam na")
#define MSG_FILAMENT_CHANGE_EXTRUDE_2 _UxGT("ekstruzje filamentu")
#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Czekam na")
#define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("wznowienie druku")
#else // LCD_HEIGHT < 4
// Up to 2 lines allowed
#define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Prosze czekac...")
#define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Wysuwanie...")
#define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Wloz i nacisnij prz.")
#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Ladowanie...")
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 _UxGT("Ekstruzja...")
#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Wznowienie...")
#endif // LCD_HEIGHT < 4
#endif // LANGUAGE_PL_H