Marlin_FB4S/Marlin/language_de.h

/**
 * Marlin 3D Printer Firmware
 * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 3 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <http://www.gnu.org/licenses/>.
 *
 */

/**
 * German
 *
 * LCD Menu Messages
 * See also https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language
 *
 */
#ifndef LANGUAGE_DE_H
#define LANGUAGE_DE_H

#define MAPPER_C2C3
#define DISPLAY_CHARSET_ISO10646_1

#define THIS_LANGUAGES_SPECIAL_SYMBOLS      _UxGT("ÄäÖöÜüß²³")

#define WELCOME_MSG                         MACHINE_NAME _UxGT(" bereit")
#define MSG_BACK                            _UxGT("Zurück")
#define MSG_SD_INSERTED                     _UxGT("SD-Karte erkannt")
#define MSG_SD_REMOVED                      _UxGT("SD-Karte entfernt")
#define MSG_LCD_ENDSTOPS                    _UxGT("Endstopp") // Max length 8 characters
#define MSG_MAIN                            _UxGT("Hauptmenü")
#define MSG_AUTOSTART                       _UxGT("Autostart")
#define MSG_DISABLE_STEPPERS                _UxGT("Motoren deaktivieren") // M84
#define MSG_AUTO_HOME                       _UxGT("Home") // G28
#define MSG_AUTO_HOME_X                     _UxGT("Home X")
#define MSG_AUTO_HOME_Y                     _UxGT("Home Y")
#define MSG_AUTO_HOME_Z                     _UxGT("Home Z")
#define MSG_LEVEL_BED_HOMING                _UxGT("Homing XYZ")
#define MSG_LEVEL_BED_WAITING               _UxGT("Klick für Start")
#define MSG_LEVEL_BED_NEXT_POINT            _UxGT("Nächste Koordinate")
#define MSG_LEVEL_BED_DONE                  _UxGT("Fertig")
#define MSG_LEVEL_BED_CANCEL                _UxGT("Abbruch")
#define MSG_SET_HOME_OFFSETS                _UxGT("Setze Homeversatz")
#define MSG_HOME_OFFSETS_APPLIED            _UxGT("Homeversatz aktiv")
#define MSG_SET_ORIGIN                      _UxGT("Setze Nullpunkt") //"G92 X0 Y0 Z0" commented out in ultralcd.cpp
#define MSG_PREHEAT_1                       _UxGT("Vorwärmen PLA")
#define MSG_PREHEAT_1_N                     _UxGT("Vorwärmen PLA ")
#define MSG_PREHEAT_1_ALL                   _UxGT("Vorw. PLA Alle")
#define MSG_PREHEAT_1_END                   MSG_PREHEAT_1 _UxGT(" Extr.")
#define MSG_PREHEAT_1_BEDONLY               _UxGT("Vorw. PLA Bett")
#define MSG_PREHEAT_1_SETTINGS              _UxGT("Vorw. PLA Einst.")
#define MSG_PREHEAT_2                       _UxGT("Vorwärmen ABS")
#define MSG_PREHEAT_2_N                     _UxGT("Vorwärmen ABS ")
#define MSG_PREHEAT_2_ALL                   _UxGT("Vorw. ABS Alle")
#define MSG_PREHEAT_2_END                   MSG_PREHEAT_2 _UxGT(" Extr.")
#define MSG_PREHEAT_2_BEDONLY               _UxGT("Vorw. ABS Bett")
#define MSG_PREHEAT_2_SETTINGS              _UxGT("Vorw. ABS Einst.")
#define MSG_COOLDOWN                        _UxGT("Abkühlen")
#define MSG_SWITCH_PS_ON                    _UxGT("Netzteil ein")
#define MSG_SWITCH_PS_OFF                   _UxGT("Netzteil aus")
#define MSG_EXTRUDE                         _UxGT("Extrudieren")
#define MSG_RETRACT                         _UxGT("Retract")
#define MSG_MOVE_AXIS                       _UxGT("Bewegen")
#define MSG_LEVEL_BED                       _UxGT("Bett nivellieren")
#define MSG_MOVE_X                          _UxGT("X")
#define MSG_MOVE_Y                          _UxGT("Y")
#define MSG_MOVE_Z                          _UxGT("Z")
#define MSG_MOVE_E                          _UxGT("Extruder ")
#define MSG_MOVE_01MM                       _UxGT(" 0,1 mm")
#define MSG_MOVE_1MM                        _UxGT(" 1,0 mm")
#define MSG_MOVE_10MM                       _UxGT("10,0 mm")
#define MSG_SPEED                           _UxGT("Geschw.")
#define MSG_BED_Z                           _UxGT("Bett Z")
#define MSG_NOZZLE                          _UxGT("Düse")
#define MSG_BED                             _UxGT("Bett")
#define MSG_FAN_SPEED                       _UxGT("Lüfter")
#define MSG_FLOW                            _UxGT("Durchfluss")
#define MSG_CONTROL                         _UxGT("Einstellungen")
#define MSG_MIN                             LCD_STR_THERMOMETER _UxGT(" min")
#define MSG_MAX                             LCD_STR_THERMOMETER _UxGT(" max")
#define MSG_FACTOR                          LCD_STR_THERMOMETER _UxGT(" Faktor")
#define MSG_AUTOTEMP                        _UxGT("AutoTemp")
#define MSG_ON                              _UxGT("Ein")
#define MSG_OFF                             _UxGT("Aus")
#define MSG_PID_P                           _UxGT("PID P")
#define MSG_PID_I                           _UxGT("PID I")
#define MSG_PID_D                           _UxGT("PID D")
#define MSG_PID_C                           _UxGT("PID C")
#define MSG_SELECT                          _UxGT("Auswählen")
#define MSG_ACC                             _UxGT("A")
#define MSG_VX_JERK                         _UxGT("V X Jerk")
#define MSG_VY_JERK                         _UxGT("V Y Jerk")
#define MSG_VZ_JERK                         _UxGT("V Z Jerk")
#define MSG_VE_JERK                         _UxGT("V E Jerk")
#define MSG_VMAX                            _UxGT("V max ") // space by purpose
#define MSG_VMIN                            _UxGT("V min")
#define MSG_VTRAV_MIN                       _UxGT("V min Leerfahrt")
#define MSG_AMAX                            _UxGT("A max ") // space by purpose
#define MSG_A_RETRACT                       _UxGT("A Retract")
#define MSG_A_TRAVEL                        _UxGT("A Leerfahrt")
#define MSG_XSTEPS                          _UxGT("X Steps/mm")
#define MSG_YSTEPS                          _UxGT("Y Steps/mm")
#define MSG_ZSTEPS                          _UxGT("Z Steps/mm")
#define MSG_ESTEPS                          _UxGT("E Steps/mm")
#define MSG_E1STEPS                         _UxGT("E1 Steps/mm")
#define MSG_E2STEPS                         _UxGT("E2 Steps/mm")
#define MSG_E3STEPS                         _UxGT("E3 Steps/mm")
#define MSG_E4STEPS                         _UxGT("E4 Steps/mm")
#define MSG_TEMPERATURE                     _UxGT("Temperatur")
#define MSG_MOTION                          _UxGT("Bewegung")
#define MSG_VOLUMETRIC                      _UxGT("Filament")
#define MSG_VOLUMETRIC_ENABLED              _UxGT("E in mm³")
#define MSG_FILAMENT_DIAM                   _UxGT("D Fil.")
#define MSG_CONTRAST                        _UxGT("LCD Kontrast")
#define MSG_STORE_EEPROM                    _UxGT("EPROM speichern")
#define MSG_LOAD_EEPROM                     _UxGT("EPROM laden")
#define MSG_RESTORE_FAILSAFE                _UxGT("Standardkonfiguration")
#define MSG_REFRESH                         _UxGT("Aktualisieren")
#define MSG_WATCH                           _UxGT("Info")
#define MSG_PREPARE                         _UxGT("Vorbereitung")
#define MSG_TUNE                            _UxGT("Justierung")
#define MSG_PAUSE_PRINT                     _UxGT("SD-Druck Pause")
#define MSG_RESUME_PRINT                    _UxGT("SD-Druck Fortsetzung")
#define MSG_STOP_PRINT                      _UxGT("SD-Druck Abbruch")
#define MSG_CARD_MENU                       _UxGT("SD-Karte")
#define MSG_NO_CARD                         _UxGT("Keine SD-Karte")
#define MSG_DWELL                           _UxGT("Warten...")
#define MSG_USERWAIT                        _UxGT("Warte auf Nutzer")
#define MSG_RESUMING                        _UxGT("Druckfortsetzung")
#define MSG_PRINT_ABORTED                   _UxGT("Druck abgebrochen")
#define MSG_NO_MOVE                         _UxGT("Motoren eingeschaltet")
#define MSG_KILLED                          _UxGT("ABGEBROCHEN")
#define MSG_STOPPED                         _UxGT("ANGEHALTEN")
#define MSG_CONTROL_RETRACT                 _UxGT("Retract mm")
#define MSG_CONTROL_RETRACT_SWAP            _UxGT("Wechs. Retract mm")
#define MSG_CONTROL_RETRACTF                _UxGT("Retract  V")
#define MSG_CONTROL_RETRACT_ZLIFT           _UxGT("Z-Hop mm")
#define MSG_CONTROL_RETRACT_RECOVER         _UxGT("UnRet mm")
#define MSG_CONTROL_RETRACT_RECOVER_SWAP    _UxGT("Wechs. UnRet mm")
#define MSG_CONTROL_RETRACT_RECOVERF        _UxGT("UnRet  V")
#define MSG_AUTORETRACT                     _UxGT("AutoRetract")
#define MSG_FILAMENTCHANGE                  _UxGT("Filament wechseln")
#define MSG_INIT_SDCARD                     _UxGT("SD-Karte erkennen")  // Manually initialize the SD-card via user interface
#define MSG_CNG_SDCARD                      _UxGT("SD-Karte getauscht") // SD-card changed by user. For machines with no autocarddetect. Both send "M21"
#define MSG_ZPROBE_OUT                      _UxGT("Sensor ausserhalb")
#define MSG_BLTOUCH_SELFTEST                _UxGT("BLTouch Test")
#define MSG_BLTOUCH_RESET                   _UxGT("BLTouch Reset")
#define MSG_HOME                            _UxGT("Vorher")  // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST
#define MSG_FIRST                           _UxGT("homen")
#define MSG_ZPROBE_ZOFFSET                  _UxGT("Z Versatz")
#define MSG_BABYSTEP_X                      _UxGT("Babystep X")
#define MSG_BABYSTEP_Y                      _UxGT("Babystep Y")
#define MSG_BABYSTEP_Z                      _UxGT("Babystep Z")
#define MSG_ENDSTOP_ABORT                   _UxGT("Endstopp-Abbr.")
#define MSG_HEATING_FAILED_LCD              _UxGT("HEIZEN FEHLGESCHLAGEN")
#define MSG_ERR_REDUNDANT_TEMP              _UxGT("REDUND. TEMPERATURABWEICHUNG")
#define MSG_THERMAL_RUNAWAY                 LCD_STR_THERMOMETER _UxGT(" NICHT ERREICHT")
#define MSG_ERR_MAXTEMP                     LCD_STR_THERMOMETER _UxGT(" ÜBERSCHRITTEN")
#define MSG_ERR_MINTEMP                     LCD_STR_THERMOMETER _UxGT(" UNTERSCHRITTEN")
#define MSG_ERR_MAXTEMP_BED                 _UxGT("BETT ") LCD_STR_THERMOMETER _UxGT(" ÜBERSCHRITTEN")
#define MSG_ERR_MINTEMP_BED                 _UxGT("BETT ") LCD_STR_THERMOMETER _UxGT(" UNTERSCHRITTEN")
#define MSG_ERR_Z_HOMING                    _UxGT("G28 Z verboten")
#define MSG_HALTED                          _UxGT("DRUCKER STOPP")
#define MSG_PLEASE_RESET                    _UxGT("Bitte Resetten")
#define MSG_SHORT_DAY                       _UxGT("t") // One character only
#define MSG_SHORT_HOUR                      _UxGT("h") // One character only
#define MSG_SHORT_MINUTE                    _UxGT("m") // One character only
#define MSG_HEATING                         _UxGT("Extr. heizt...")
#define MSG_HEATING_COMPLETE                _UxGT("Extr. aufgeheizt")
#define MSG_BED_HEATING                     _UxGT("Bett heizt...")
#define MSG_BED_DONE                        _UxGT("Bett aufgeheizt")
#define MSG_DELTA_CALIBRATE                 _UxGT("Delta kalibrieren")
#define MSG_DELTA_CALIBRATE_X               _UxGT("Kalibriere X")
#define MSG_DELTA_CALIBRATE_Y               _UxGT("Kalibriere Y")
#define MSG_DELTA_CALIBRATE_Z               _UxGT("Kalibriere Z")
#define MSG_DELTA_CALIBRATE_CENTER          _UxGT("Kalibriere Mitte")
#define MSG_DEBUG_MENU                      _UxGT("Debug Menu")
#define MSG_PROGRESS_BAR_TEST               _UxGT("Fortschrittb. Test")

#define MSG_INFO_MENU                       _UxGT("Über den Drucker")
#define MSG_INFO_PRINTER_MENU               _UxGT("Drucker Info")
#define MSG_INFO_STATS_MENU                 _UxGT("Drucker Stat.")
#define MSG_INFO_BOARD_MENU                 _UxGT("Board Info")
#define MSG_INFO_THERMISTOR_MENU            _UxGT("Thermistoren")
#define MSG_INFO_EXTRUDERS                  _UxGT("Extruder")
#define MSG_INFO_BAUDRATE                   _UxGT("Baud")
#define MSG_INFO_PROTOCOL                   _UxGT("Protokoll")
#define MSG_LIGHTS_ON                       _UxGT("Gehäuse Licht an")
#define MSG_LIGHTS_OFF                      _UxGT("Gehäuse Licht aus")

#if LCD_WIDTH >= 20
  #define MSG_INFO_PRINT_COUNT              _UxGT("Gesamte Drucke")
  #define MSG_INFO_COMPLETED_PRINTS         _UxGT("Beendete Drucke")
  #define MSG_INFO_PRINT_TIME               _UxGT("Gesamte Druckzeit")
  #define MSG_INFO_PRINT_LONGEST            _UxGT("Längster Druckjob")
  #define MSG_INFO_PRINT_FILAMENT           _UxGT("Gesamt Extrudiert")
#else
  #define MSG_INFO_PRINT_COUNT              _UxGT("Drucke")
  #define MSG_INFO_COMPLETED_PRINTS         _UxGT("Komplett")
  #define MSG_INFO_PRINT_TIME               _UxGT("Gesamt ")
  #define MSG_INFO_PRINT_LONGEST            _UxGT("Längster")
  #define MSG_INFO_PRINT_FILAMENT           _UxGT("Extrud.")
#endif
#define MSG_INFO_MIN_TEMP                   _UxGT("Min Temp")
#define MSG_INFO_MAX_TEMP                   _UxGT("Max Temp")
#define MSG_INFO_PSU                        _UxGT("Stromversorgung")

#define MSG_DRIVE_STRENGTH                  _UxGT("Motorströme")
#define MSG_DAC_PERCENT                     _UxGT("Treiber %")
#define MSG_DAC_EEPROM_WRITE                _UxGT("Werte speichern")

#define MSG_FILAMENT_CHANGE_HEADER          _UxGT("ÄNDERE FILAMENT")
#define MSG_FILAMENT_CHANGE_OPTION_HEADER   _UxGT("ÄNDERE OPTIONEN:")
#define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE  _UxGT("Extrude mehr")
#define MSG_FILAMENT_CHANGE_OPTION_RESUME   _UxGT("Drucke weiter")
#define MSG_FILAMENT_CHANGE_MINTEMP         _UxGT("Min. Temperatur ist ")
#define MSG_FILAMENT_CHANGE_NOZZLE          _UxGT("  Düse: ")

#if LCD_HEIGHT >= 4
  // Up to 3 lines allowed
  #define MSG_FILAMENT_CHANGE_INIT_1          _UxGT("Warte auf den")
  #define MSG_FILAMENT_CHANGE_INIT_2          _UxGT("Start des")
  #define MSG_FILAMENT_CHANGE_INIT_3          _UxGT("Filamentwechsels")
  #define MSG_FILAMENT_CHANGE_UNLOAD_1        _UxGT("Warte auf")
  #define MSG_FILAMENT_CHANGE_UNLOAD_2        _UxGT("Herausnahme")
  #define MSG_FILAMENT_CHANGE_UNLOAD_3        _UxGT("des Filaments")
  #define MSG_FILAMENT_CHANGE_INSERT_1        _UxGT("Filament einlegen")
  #define MSG_FILAMENT_CHANGE_INSERT_2        _UxGT("und Knopf")
  #define MSG_FILAMENT_CHANGE_INSERT_3        _UxGT("drücken...")
  #define MSG_FILAMENT_CHANGE_HEAT_1          _UxGT("Knopf drücken um")
  #define MSG_FILAMENT_CHANGE_HEAT_2          _UxGT("Düse aufzuheizen.")
  #define MSG_FILAMENT_CHANGE_HEATING_1       _UxGT("Düse heizt auf.")
  #define MSG_FILAMENT_CHANGE_HEATING_2       _UxGT("Bitte warten...")
  #define MSG_FILAMENT_CHANGE_LOAD_1          _UxGT("Warte auf")
  #define MSG_FILAMENT_CHANGE_LOAD_2          _UxGT("Laden des")
  #define MSG_FILAMENT_CHANGE_LOAD_3          _UxGT("Filaments")
  #define MSG_FILAMENT_CHANGE_EXTRUDE_1       _UxGT("Warte auf")
  #define MSG_FILAMENT_CHANGE_EXTRUDE_2       _UxGT("Extrusion des")
  #define MSG_FILAMENT_CHANGE_EXTRUDE_3       _UxGT("Filaments")
  #define MSG_FILAMENT_CHANGE_RESUME_1        _UxGT("Warte auf")
  #define MSG_FILAMENT_CHANGE_RESUME_2        _UxGT("Fortsetzung des")
  #define MSG_FILAMENT_CHANGE_RESUME_3        _UxGT("Druckes")
#else // LCD_HEIGHT < 4
  // Up to 2 lines allowed
  #define MSG_FILAMENT_CHANGE_INIT_1          _UxGT("Bitte warten...")
  #define MSG_FILAMENT_CHANGE_UNLOAD_1        _UxGT("Auswerfen...")
  #define MSG_FILAMENT_CHANGE_INSERT_1        _UxGT("Laden und Klick")
  #define MSG_FILAMENT_CHANGE_HEATING_1       _UxGT("Heizen...")
  #define MSG_FILAMENT_CHANGE_LOAD_1          _UxGT("Laden...")
  #define MSG_FILAMENT_CHANGE_EXTRUDE_1       _UxGT("Extrudieren...")
  #define MSG_FILAMENT_CHANGE_RESUME_1        _UxGT("Fortsetzen...")
#endif // LCD_HEIGHT < 4

#endif // LANGUAGE_DE_H
Further cleanup of comments, partial Doxygen-style Following up on #3231 9 years ago			`/**`
Added gplv3 header to all Marlin files 9 years ago			`* Marlin 3D Printer Firmware`
			`* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]`
			`*`
			`* Based on Sprinter and grbl.`
			`* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm`
			`*`
			`* This program is free software: you can redistribute it and/or modify`
			`* it under the terms of the GNU General Public License as published by`
			`* the Free Software Foundation, either version 3 of the License, or`
			`* (at your option) any later version.`
			`*`
			`* This program is distributed in the hope that it will be useful,`
			`* but WITHOUT ANY WARRANTY; without even the implied warranty of`
			`* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the`
			`* GNU General Public License for more details.`
			`*`
			`* You should have received a copy of the GNU General Public License`
			`* along with this program. If not, see <http://www.gnu.org/licenses/>.`
			`*`
			`*/`

Clean up, move unused to the bottom, add headings 10 years ago			`/**`
			`* German`
			`*`
			`* LCD Menu Messages`
Change link to the document documentation/LCDLanguageFont.md moved to http://www.marlinfirmware.org/ at commit 12d0983757d7986a2744136331415fbbb17758c0, but http://www.marlinfirmware.org/ isn't working. 9 years ago			`* See also https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language`
Clean up, move unused to the bottom, add headings 10 years ago			`*`
			`*/`
Split up languages.h, use ISO codes Breaking up languages.h makes it easier to translate. Using language codes makes it easier to select a language and sets the naming standard. 10 years ago			`#ifndef LANGUAGE_DE_H`
			`#define LANGUAGE_DE_H`

Introduce - clean - prepae language files 10 years ago			`#define MAPPER_C2C3`
Change selection logic another time Automatic selection was to unflexible. Updated documentation Updated language files to new logic and documentation. Updated bdf2u8g.exe 10 years ago			`#define DISPLAY_CHARSET_ISO10646_1`
Introduce - clean - prepae language files 10 years ago
Add symbol-string to _de Add symbol-string for _de to reduce the frquencey of regenerating 'mappers' and 'fonts' with the new utf-system. 8 years ago			`#define THIS_LANGUAGES_SPECIAL_SYMBOLS _UxGT("ÄäÖöÜüß²³")`

tag the utf-8 strings 8 years ago			`#define WELCOME_MSG MACHINE_NAME _UxGT(" bereit")`
Update language_de.h Addition of missing strings to match language_en.h 8 years ago			`#define MSG_BACK _UxGT("Zurück")`
tag the utf-8 strings 8 years ago			`#define MSG_SD_INSERTED _UxGT("SD-Karte erkannt")`
			`#define MSG_SD_REMOVED _UxGT("SD-Karte entfernt")`
			`#define MSG_LCD_ENDSTOPS _UxGT("Endstopp") // Max length 8 characters`
			`#define MSG_MAIN _UxGT("Hauptmenü")`
			`#define MSG_AUTOSTART _UxGT("Autostart")`
			`#define MSG_DISABLE_STEPPERS _UxGT("Motoren deaktivieren") // M84`
			`#define MSG_AUTO_HOME _UxGT("Home") // G28`
			`#define MSG_AUTO_HOME_X _UxGT("Home X")`
			`#define MSG_AUTO_HOME_Y _UxGT("Home Y")`
			`#define MSG_AUTO_HOME_Z _UxGT("Home Z")`
			`#define MSG_LEVEL_BED_HOMING _UxGT("Homing XYZ")`
			`#define MSG_LEVEL_BED_WAITING _UxGT("Klick für Start")`
			`#define MSG_LEVEL_BED_NEXT_POINT _UxGT("Nächste Koordinate")`
			`#define MSG_LEVEL_BED_DONE _UxGT("Fertig")`
			`#define MSG_LEVEL_BED_CANCEL _UxGT("Abbruch")`
			`#define MSG_SET_HOME_OFFSETS _UxGT("Setze Homeversatz")`
			`#define MSG_HOME_OFFSETS_APPLIED _UxGT("Homeversatz aktiv")`
			`#define MSG_SET_ORIGIN _UxGT("Setze Nullpunkt") //"G92 X0 Y0 Z0" commented out in ultralcd.cpp`
			`#define MSG_PREHEAT_1 _UxGT("Vorwärmen PLA")`
			`#define MSG_PREHEAT_1_N _UxGT("Vorwärmen PLA ")`
			`#define MSG_PREHEAT_1_ALL _UxGT("Vorw. PLA Alle")`
Update language_de.h Addition of missing strings to match language_en.h 8 years ago			`#define MSG_PREHEAT_1_END MSG_PREHEAT_1 _UxGT(" Extr.")`
tag the utf-8 strings 8 years ago			`#define MSG_PREHEAT_1_BEDONLY _UxGT("Vorw. PLA Bett")`
			`#define MSG_PREHEAT_1_SETTINGS _UxGT("Vorw. PLA Einst.")`
			`#define MSG_PREHEAT_2 _UxGT("Vorwärmen ABS")`
			`#define MSG_PREHEAT_2_N _UxGT("Vorwärmen ABS ")`
			`#define MSG_PREHEAT_2_ALL _UxGT("Vorw. ABS Alle")`
Update language_de.h Addition of missing strings to match language_en.h 8 years ago			`#define MSG_PREHEAT_2_END MSG_PREHEAT_2 _UxGT(" Extr.")`
tag the utf-8 strings 8 years ago			`#define MSG_PREHEAT_2_BEDONLY _UxGT("Vorw. ABS Bett")`
			`#define MSG_PREHEAT_2_SETTINGS _UxGT("Vorw. ABS Einst.")`
			`#define MSG_COOLDOWN _UxGT("Abkühlen")`
			`#define MSG_SWITCH_PS_ON _UxGT("Netzteil ein")`
			`#define MSG_SWITCH_PS_OFF _UxGT("Netzteil aus")`
			`#define MSG_EXTRUDE _UxGT("Extrudieren")`
			`#define MSG_RETRACT _UxGT("Retract")`
			`#define MSG_MOVE_AXIS _UxGT("Bewegen")`
			`#define MSG_LEVEL_BED _UxGT("Bett nivellieren")`
			`#define MSG_MOVE_X _UxGT("X")`
			`#define MSG_MOVE_Y _UxGT("Y")`
			`#define MSG_MOVE_Z _UxGT("Z")`
			`#define MSG_MOVE_E _UxGT("Extruder ")`
			`#define MSG_MOVE_01MM _UxGT(" 0,1 mm")`
			`#define MSG_MOVE_1MM _UxGT(" 1,0 mm")`
			`#define MSG_MOVE_10MM _UxGT("10,0 mm")`
			`#define MSG_SPEED _UxGT("Geschw.")`
			`#define MSG_BED_Z _UxGT("Bett Z")`
			`#define MSG_NOZZLE _UxGT("Düse")`
			`#define MSG_BED _UxGT("Bett")`
			`#define MSG_FAN_SPEED _UxGT("Lüfter")`
			`#define MSG_FLOW _UxGT("Durchfluss")`
			`#define MSG_CONTROL _UxGT("Einstellungen")`
			`#define MSG_MIN LCD_STR_THERMOMETER _UxGT(" min")`
			`#define MSG_MAX LCD_STR_THERMOMETER _UxGT(" max")`
			`#define MSG_FACTOR LCD_STR_THERMOMETER _UxGT(" Faktor")`
			`#define MSG_AUTOTEMP _UxGT("AutoTemp")`
			`#define MSG_ON _UxGT("Ein")`
			`#define MSG_OFF _UxGT("Aus")`
			`#define MSG_PID_P _UxGT("PID P")`
			`#define MSG_PID_I _UxGT("PID I")`
			`#define MSG_PID_D _UxGT("PID D")`
			`#define MSG_PID_C _UxGT("PID C")`
			`#define MSG_SELECT _UxGT("Auswählen")`
			`#define MSG_ACC _UxGT("A")`
			`#define MSG_VX_JERK _UxGT("V X Jerk")`
			`#define MSG_VY_JERK _UxGT("V Y Jerk")`
			`#define MSG_VZ_JERK _UxGT("V Z Jerk")`
			`#define MSG_VE_JERK _UxGT("V E Jerk")`
			`#define MSG_VMAX _UxGT("V max ") // space by purpose`
			`#define MSG_VMIN _UxGT("V min")`
			`#define MSG_VTRAV_MIN _UxGT("V min Leerfahrt")`
			`#define MSG_AMAX _UxGT("A max ") // space by purpose`
			`#define MSG_A_RETRACT _UxGT("A Retract")`
			`#define MSG_A_TRAVEL _UxGT("A Leerfahrt")`
			`#define MSG_XSTEPS _UxGT("X Steps/mm")`
			`#define MSG_YSTEPS _UxGT("Y Steps/mm")`
			`#define MSG_ZSTEPS _UxGT("Z Steps/mm")`
			`#define MSG_ESTEPS _UxGT("E Steps/mm")`
			`#define MSG_E1STEPS _UxGT("E1 Steps/mm")`
			`#define MSG_E2STEPS _UxGT("E2 Steps/mm")`
			`#define MSG_E3STEPS _UxGT("E3 Steps/mm")`
			`#define MSG_E4STEPS _UxGT("E4 Steps/mm")`
			`#define MSG_TEMPERATURE _UxGT("Temperatur")`
			`#define MSG_MOTION _UxGT("Bewegung")`
			`#define MSG_VOLUMETRIC _UxGT("Filament")`
			`#define MSG_VOLUMETRIC_ENABLED _UxGT("E in mm³")`
			`#define MSG_FILAMENT_DIAM _UxGT("D Fil.")`
			`#define MSG_CONTRAST _UxGT("LCD Kontrast")`
Audible feedback for settings store/load/reset 8 years ago			`#define MSG_STORE_EEPROM _UxGT("EPROM speichern")`
			`#define MSG_LOAD_EEPROM _UxGT("EPROM laden")`
tag the utf-8 strings 8 years ago			`#define MSG_RESTORE_FAILSAFE _UxGT("Standardkonfiguration")`
			`#define MSG_REFRESH _UxGT("Aktualisieren")`
			`#define MSG_WATCH _UxGT("Info")`
			`#define MSG_PREPARE _UxGT("Vorbereitung")`
			`#define MSG_TUNE _UxGT("Justierung")`
			`#define MSG_PAUSE_PRINT _UxGT("SD-Druck Pause")`
			`#define MSG_RESUME_PRINT _UxGT("SD-Druck Fortsetzung")`
			`#define MSG_STOP_PRINT _UxGT("SD-Druck Abbruch")`
			`#define MSG_CARD_MENU _UxGT("SD-Karte")`
			`#define MSG_NO_CARD _UxGT("Keine SD-Karte")`
			`#define MSG_DWELL _UxGT("Warten...")`
			`#define MSG_USERWAIT _UxGT("Warte auf Nutzer")`
			`#define MSG_RESUMING _UxGT("Druckfortsetzung")`
			`#define MSG_PRINT_ABORTED _UxGT("Druck abgebrochen")`
			`#define MSG_NO_MOVE _UxGT("Motoren eingeschaltet")`
			`#define MSG_KILLED _UxGT("ABGEBROCHEN")`
			`#define MSG_STOPPED _UxGT("ANGEHALTEN")`
			`#define MSG_CONTROL_RETRACT _UxGT("Retract mm")`
			`#define MSG_CONTROL_RETRACT_SWAP _UxGT("Wechs. Retract mm")`
			`#define MSG_CONTROL_RETRACTF _UxGT("Retract V")`
			`#define MSG_CONTROL_RETRACT_ZLIFT _UxGT("Z-Hop mm")`
Change "+mm" to "mm" in most languages - Japanese and Chinese still need update 8 years ago			`#define MSG_CONTROL_RETRACT_RECOVER _UxGT("UnRet mm")`
			`#define MSG_CONTROL_RETRACT_RECOVER_SWAP _UxGT("Wechs. UnRet mm")`
tag the utf-8 strings 8 years ago			`#define MSG_CONTROL_RETRACT_RECOVERF _UxGT("UnRet V")`
			`#define MSG_AUTORETRACT _UxGT("AutoRetract")`
			`#define MSG_FILAMENTCHANGE _UxGT("Filament wechseln")`
			`#define MSG_INIT_SDCARD _UxGT("SD-Karte erkennen") // Manually initialize the SD-card via user interface`
			`#define MSG_CNG_SDCARD _UxGT("SD-Karte getauscht") // SD-card changed by user. For machines with no autocarddetect. Both send "M21"`
			`#define MSG_ZPROBE_OUT _UxGT("Sensor ausserhalb")`
			`#define MSG_BLTOUCH_SELFTEST _UxGT("BLTouch Test")`
			`#define MSG_BLTOUCH_RESET _UxGT("BLTouch Reset")`
			`#define MSG_HOME _UxGT("Vorher") // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST`
			`#define MSG_FIRST _UxGT("homen")`
			`#define MSG_ZPROBE_ZOFFSET _UxGT("Z Versatz")`
			`#define MSG_BABYSTEP_X _UxGT("Babystep X")`
			`#define MSG_BABYSTEP_Y _UxGT("Babystep Y")`
			`#define MSG_BABYSTEP_Z _UxGT("Babystep Z")`
			`#define MSG_ENDSTOP_ABORT _UxGT("Endstopp-Abbr.")`
			`#define MSG_HEATING_FAILED_LCD _UxGT("HEIZEN FEHLGESCHLAGEN")`
			`#define MSG_ERR_REDUNDANT_TEMP _UxGT("REDUND. TEMPERATURABWEICHUNG")`
			`#define MSG_THERMAL_RUNAWAY LCD_STR_THERMOMETER _UxGT(" NICHT ERREICHT")`
			`#define MSG_ERR_MAXTEMP LCD_STR_THERMOMETER _UxGT(" ÜBERSCHRITTEN")`
			`#define MSG_ERR_MINTEMP LCD_STR_THERMOMETER _UxGT(" UNTERSCHRITTEN")`
			`#define MSG_ERR_MAXTEMP_BED _UxGT("BETT ") LCD_STR_THERMOMETER _UxGT(" ÜBERSCHRITTEN")`
			`#define MSG_ERR_MINTEMP_BED _UxGT("BETT ") LCD_STR_THERMOMETER _UxGT(" UNTERSCHRITTEN")`
			`#define MSG_ERR_Z_HOMING _UxGT("G28 Z verboten")`
			`#define MSG_HALTED _UxGT("DRUCKER STOPP")`
			`#define MSG_PLEASE_RESET _UxGT("Bitte Resetten")`
			`#define MSG_SHORT_DAY _UxGT("t") // One character only`
			`#define MSG_SHORT_HOUR _UxGT("h") // One character only`
			`#define MSG_SHORT_MINUTE _UxGT("m") // One character only`
			`#define MSG_HEATING _UxGT("Extr. heizt...")`
			`#define MSG_HEATING_COMPLETE _UxGT("Extr. aufgeheizt")`
			`#define MSG_BED_HEATING _UxGT("Bett heizt...")`
			`#define MSG_BED_DONE _UxGT("Bett aufgeheizt")`
			`#define MSG_DELTA_CALIBRATE _UxGT("Delta kalibrieren")`
			`#define MSG_DELTA_CALIBRATE_X _UxGT("Kalibriere X")`
			`#define MSG_DELTA_CALIBRATE_Y _UxGT("Kalibriere Y")`
			`#define MSG_DELTA_CALIBRATE_Z _UxGT("Kalibriere Z")`
			`#define MSG_DELTA_CALIBRATE_CENTER _UxGT("Kalibriere Mitte")`
Update language_de.h Added tarnslation for ``` #define MSG_DEBUG_MENU #define MSG_PROGRESS_BAR_TEST ``` 8 years ago			`#define MSG_DEBUG_MENU _UxGT("Debug Menu")`
			`#define MSG_PROGRESS_BAR_TEST _UxGT("Fortschrittb. Test")`
Delta calibration menu based on http://minow.blogspot.com/index.html#4918805519571907051 To test/enable, uncomment the #define DELTA_CALIBRATION_MENU in Configuration.h 10 years ago
tag the utf-8 strings 8 years ago			`#define MSG_INFO_MENU _UxGT("Über den Drucker")`
			`#define MSG_INFO_PRINTER_MENU _UxGT("Drucker Info")`
			`#define MSG_INFO_STATS_MENU _UxGT("Drucker Stat.")`
			`#define MSG_INFO_BOARD_MENU _UxGT("Board Info")`
Update language_de.h Small corrections 8 years ago			`#define MSG_INFO_THERMISTOR_MENU _UxGT("Thermistoren")`
			`#define MSG_INFO_EXTRUDERS _UxGT("Extruder")`
tag the utf-8 strings 8 years ago			`#define MSG_INFO_BAUDRATE _UxGT("Baud")`
			`#define MSG_INFO_PROTOCOL _UxGT("Protokoll")`
			`#define MSG_LIGHTS_ON _UxGT("Gehäuse Licht an")`
			`#define MSG_LIGHTS_OFF _UxGT("Gehäuse Licht aus")`
finished => completed 8 years ago
Patch up some language formatting 8 years ago			`#if LCD_WIDTH >= 20`
tag the utf-8 strings 8 years ago			`#define MSG_INFO_PRINT_COUNT _UxGT("Gesamte Drucke")`
			`#define MSG_INFO_COMPLETED_PRINTS _UxGT("Beendete Drucke")`
			`#define MSG_INFO_PRINT_TIME _UxGT("Gesamte Druckzeit")`
			`#define MSG_INFO_PRINT_LONGEST _UxGT("Längster Druckjob")`
			`#define MSG_INFO_PRINT_FILAMENT _UxGT("Gesamt Extrudiert")`
finished => completed 8 years ago			`#else`
tag the utf-8 strings 8 years ago			`#define MSG_INFO_PRINT_COUNT _UxGT("Drucke")`
			`#define MSG_INFO_COMPLETED_PRINTS _UxGT("Komplett")`
			`#define MSG_INFO_PRINT_TIME _UxGT("Gesamt ")`
			`#define MSG_INFO_PRINT_LONGEST _UxGT("Längster")`
			`#define MSG_INFO_PRINT_FILAMENT _UxGT("Extrud.")`
finished => completed 8 years ago			`#endif`
tag the utf-8 strings 8 years ago			`#define MSG_INFO_MIN_TEMP _UxGT("Min Temp")`
			`#define MSG_INFO_MAX_TEMP _UxGT("Max Temp")`
			`#define MSG_INFO_PSU _UxGT("Stromversorgung")`
Update language_de.h for German translation @MarlinFirmware/language-team my changes for the German language. Feel free to improve :) 8 years ago
tag the utf-8 strings 8 years ago			`#define MSG_DRIVE_STRENGTH _UxGT("Motorströme")`
			`#define MSG_DAC_PERCENT _UxGT("Treiber %")`
			`#define MSG_DAC_EEPROM_WRITE _UxGT("Werte speichern")`
Add missing translations to lang-de 8 years ago
tag the utf-8 strings 8 years ago			`#define MSG_FILAMENT_CHANGE_HEADER _UxGT("ÄNDERE FILAMENT")`
			`#define MSG_FILAMENT_CHANGE_OPTION_HEADER _UxGT("ÄNDERE OPTIONEN:")`
			`#define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE _UxGT("Extrude mehr")`
			`#define MSG_FILAMENT_CHANGE_OPTION_RESUME _UxGT("Drucke weiter")`
Update language_de.h Addition of missing strings to match language_en.h 8 years ago			`#define MSG_FILAMENT_CHANGE_MINTEMP _UxGT("Min. Temperatur ist ")`
			`#define MSG_FILAMENT_CHANGE_NOZZLE _UxGT(" Düse: ")`
Update language_de.h for German translation @MarlinFirmware/language-team my changes for the German language. Feel free to improve :) 8 years ago
			`#if LCD_HEIGHT >= 4`
Remove filament-change empty lines from languages 8 years ago			`// Up to 3 lines allowed`
tag the utf-8 strings 8 years ago			`#define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Warte auf den")`
Update language_de.h Small corrections 8 years ago			`#define MSG_FILAMENT_CHANGE_INIT_2 _UxGT("Start des")`
tag the utf-8 strings 8 years ago			`#define MSG_FILAMENT_CHANGE_INIT_3 _UxGT("Filamentwechsels")`
			`#define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Warte auf")`
			`#define MSG_FILAMENT_CHANGE_UNLOAD_2 _UxGT("Herausnahme")`
			`#define MSG_FILAMENT_CHANGE_UNLOAD_3 _UxGT("des Filaments")`
			`#define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Filament einlegen")`
			`#define MSG_FILAMENT_CHANGE_INSERT_2 _UxGT("und Knopf")`
			`#define MSG_FILAMENT_CHANGE_INSERT_3 _UxGT("drücken...")`
Update language_de.h Addition of missing strings to match language_en.h 8 years ago			`#define MSG_FILAMENT_CHANGE_HEAT_1 _UxGT("Knopf drücken um")`
			`#define MSG_FILAMENT_CHANGE_HEAT_2 _UxGT("Düse aufzuheizen.")`
			`#define MSG_FILAMENT_CHANGE_HEATING_1 _UxGT("Düse heizt auf.")`
			`#define MSG_FILAMENT_CHANGE_HEATING_2 _UxGT("Bitte warten...")`
tag the utf-8 strings 8 years ago			`#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Warte auf")`
			`#define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("Laden des")`
			`#define MSG_FILAMENT_CHANGE_LOAD_3 _UxGT("Filaments")`
			`#define MSG_FILAMENT_CHANGE_EXTRUDE_1 _UxGT("Warte auf")`
			`#define MSG_FILAMENT_CHANGE_EXTRUDE_2 _UxGT("Extrusion des")`
			`#define MSG_FILAMENT_CHANGE_EXTRUDE_3 _UxGT("Filaments")`
			`#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Warte auf")`
			`#define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("Fortsetzung des")`
			`#define MSG_FILAMENT_CHANGE_RESUME_3 _UxGT("Druckes")`
Update language_de.h for German translation @MarlinFirmware/language-team my changes for the German language. Feel free to improve :) 8 years ago			`#else // LCD_HEIGHT < 4`
Remove filament-change empty lines from languages 8 years ago			`// Up to 2 lines allowed`
tag the utf-8 strings 8 years ago			`#define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Bitte warten...")`
			`#define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Auswerfen...")`
			`#define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Laden und Klick")`
Update language_de.h Addition of missing strings to match language_en.h 8 years ago			`#define MSG_FILAMENT_CHANGE_HEATING_1 _UxGT("Heizen...")`
tag the utf-8 strings 8 years ago			`#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Laden...")`
			`#define MSG_FILAMENT_CHANGE_EXTRUDE_1 _UxGT("Extrudieren...")`
Update language_de.h Added tarnslation for ``` #define MSG_DEBUG_MENU #define MSG_PROGRESS_BAR_TEST ``` 8 years ago			`#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Fortsetzen...")`
Update language_de.h for German translation @MarlinFirmware/language-team my changes for the German language. Feel free to improve :) 8 years ago			`#endif // LCD_HEIGHT < 4`

Split up languages.h, use ISO codes Breaking up languages.h makes it easier to translate. Using language codes makes it easier to select a language and sets the naming standard. 10 years ago			`#endif // LANGUAGE_DE_H`