Marlin 2.0 for Flying Bear 4S/5
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

63 lines
2.0 KiB

/**
* Marlin 3D Printer Firmware
5 years ago
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once
// R25 = 100 kOhm, beta25 = 4267 K, 1 kOhm pull-up,
// 100k ATC Semitec 104GT-2 (Used on ParCan) (WITH 1kohm RESISTOR FOR PULLUP, R9 ON SANGUINOLOLU! NOT FOR 4.7kohm PULLUP! THIS IS NOT NORMAL!)
// Verified by linagee. Source: https://www.mouser.com/datasheet/2/362/semitec%20usa%20corporation_gtthermistor-1202937.pdf
// Calculated using 1kohm pullup, voltage divider math, and manufacturer provided temp/resistance
// Advantage: More resolution and better linearity from 150C to 200C
const temp_entry_t temptable_55[] PROGMEM = {
{ OV( 1), 500 },
{ OV( 76), 300 },
{ OV( 87), 290 },
{ OV( 100), 280 },
{ OV( 114), 270 },
{ OV( 131), 260 },
{ OV( 152), 250 },
{ OV( 175), 240 },
{ OV( 202), 230 },
{ OV( 234), 220 },
{ OV( 271), 210 },
{ OV( 312), 200 },
{ OV( 359), 190 },
{ OV( 411), 180 },
{ OV( 467), 170 },
{ OV( 527), 160 },
{ OV( 590), 150 },
{ OV( 652), 140 },
{ OV( 713), 130 },
{ OV( 770), 120 },
{ OV( 822), 110 },
{ OV( 867), 100 },
{ OV( 905), 90 },
{ OV( 936), 80 },
{ OV( 961), 70 },
{ OV( 979), 60 },
{ OV( 993), 50 },
{ OV(1003), 40 },
{ OV(1010), 30 },
{ OV(1015), 20 },
{ OV(1018), 10 },
{ OV(1020), 0 }
};