Marlin 2.0 for Flying Bear 4S/5
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

378 lines
10 KiB

/**
* Marlin 3D Printer Firmware
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#pragma once
#include "inc/MarlinConfig.h"
#ifdef DEBUG_GCODE_PARSER
#include "gcode/parser.h"
#endif
#include <math.h>
#include <stdio.h>
#include <stdlib.h>
#if HAS_DRIVER(L6470)
#include "libs/L6470/L6470_Marlin.h"
extern uint8_t axis_known_position;
#endif
void stop();
void idle(
#if ENABLED(ADVANCED_PAUSE_FEATURE)
bool no_stepper_sleep = false // pass true to keep steppers from disabling on timeout
#endif
);
void manage_inactivity(const bool ignore_stepper_queue=false);
13 years ago
//
// X, Y, Z Stepper enable / disable
//
#if AXIS_DRIVER_TYPE_X(L6470)
extern L6470 stepperX;
#define X_enable NOOP
#define X_disable stepperX.free()
#elif HAS_X_ENABLE
#define X_enable X_ENABLE_WRITE( X_ENABLE_ON)
#define X_disable X_ENABLE_WRITE(!X_ENABLE_ON)
#else
#define X_enable NOOP
#define X_disable NOOP
#endif
#if AXIS_DRIVER_TYPE_X2(L6470)
extern L6470 stepperX2;
#define X2_enable NOOP
#define X2_disable stepperX2.free()
#elif HAS_X2_ENABLE
#define X2_enable X2_ENABLE_WRITE( X_ENABLE_ON)
#define X2_disable X2_ENABLE_WRITE(!X_ENABLE_ON)
#else
#define X2_enable NOOP
#define X2_disable NOOP
#endif
#define enable_X() do{ X_enable; X2_enable; }while(0)
#define disable_X() do{ X_disable; X2_disable; CBI(axis_known_position, X_AXIS); }while(0)
#if AXIS_DRIVER_TYPE_Y(L6470)
extern L6470 stepperY;
#define Y_enable NOOP
#define Y_disable stepperY.free()
#elif HAS_Y_ENABLE
#define Y_enable Y_ENABLE_WRITE( Y_ENABLE_ON)
#define Y_disable Y_ENABLE_WRITE(!Y_ENABLE_ON)
#else
#define Y_enable NOOP
#define Y_disable NOOP
#endif
#if AXIS_DRIVER_TYPE_Y2(L6470)
extern L6470 stepperY2;
#define Y2_enable NOOP
#define Y2_disable stepperY2.free()
#elif HAS_Y2_ENABLE
#define Y2_enable Y2_ENABLE_WRITE( Y_ENABLE_ON)
#define Y2_disable Y2_ENABLE_WRITE(!Y_ENABLE_ON)
#else
#define Y2_enable NOOP
#define Y2_disable NOOP
#endif
#define enable_Y() do{ Y_enable; Y2_enable; }while(0)
#define disable_Y() do{ Y_disable; Y2_disable; CBI(axis_known_position, Y_AXIS); }while(0)
#if AXIS_DRIVER_TYPE_Z(L6470)
extern L6470 stepperZ;
#define Z_enable NOOP
#define Z_disable stepperZ.free()
#elif HAS_Z_ENABLE
#define Z_enable Z_ENABLE_WRITE( Z_ENABLE_ON)
#define Z_disable Z_ENABLE_WRITE(!Z_ENABLE_ON)
#else
#define Z_enable NOOP
#define Z_disable NOOP
#endif
#if AXIS_DRIVER_TYPE_Z2(L6470)
extern L6470 stepperZ2;
#define Z2_enable NOOP
#define Z2_disable stepperZ2.free()
#elif HAS_Z2_ENABLE
#define Z2_enable Z2_ENABLE_WRITE( Z_ENABLE_ON)
#define Z2_disable Z2_ENABLE_WRITE(!Z_ENABLE_ON)
#else
#define Z2_enable NOOP
#define Z2_disable NOOP
#endif
#if AXIS_DRIVER_TYPE_Z3(L6470)
extern L6470 stepperZ3;
#define Z3_enable NOOP
#define Z3_disable stepperZ3.free()
#elif HAS_Z3_ENABLE
#define Z3_enable Z3_ENABLE_WRITE( Z_ENABLE_ON)
#define Z3_disable Z3_ENABLE_WRITE(!Z_ENABLE_ON)
#else
#define Z3_enable NOOP
#define Z3_disable NOOP
#endif
#define enable_Z() do{ Z_enable; Z2_enable; Z3_enable; }while(0)
#define disable_Z() do{ Z_disable; Z2_disable; Z3_disable; CBI(axis_known_position, Z_AXIS); }while(0)
//
// Extruder Stepper enable / disable
//
// define the individual enables/disables
#if AXIS_DRIVER_TYPE_E0(L6470)
extern L6470 stepperE0;
#define E0_enable NOOP
#define E0_disable do{ stepperE0.free(); CBI(axis_known_position, E_AXIS); }while(0)
#elif HAS_E0_ENABLE
#define E0_enable E0_ENABLE_WRITE( E_ENABLE_ON)
#define E0_disable E0_ENABLE_WRITE(!E_ENABLE_ON)
#else
#define E0_enable NOOP
#define E0_disable NOOP
#endif
#if AXIS_DRIVER_TYPE_E1(L6470)
extern L6470 stepperE1;
#define E1_enable NOOP
#define E1_disable do{ stepperE1.free(); CBI(axis_known_position, E_AXIS); }while(0)
#elif E_STEPPERS > 1 && HAS_E1_ENABLE
#define E1_enable E1_ENABLE_WRITE( E_ENABLE_ON)
#define E1_disable E1_ENABLE_WRITE(!E_ENABLE_ON)
#else
#define E1_enable NOOP
#define E1_disable NOOP
#endif
#if AXIS_DRIVER_TYPE_E2(L6470)
extern L6470 stepperE2;
#define E2_enable NOOP
#define E2_disable do{ stepperE2.free(); CBI(axis_known_position, E_AXIS); }while(0)
#elif E_STEPPERS > 2 && HAS_E2_ENABLE
#define E2_enable E2_ENABLE_WRITE( E_ENABLE_ON)
#define E2_disable E2_ENABLE_WRITE(!E_ENABLE_ON)
#else
#define E2_enable NOOP
#define E2_disable NOOP
#endif
#if AXIS_DRIVER_TYPE_E3(L6470)
extern L6470 stepperE3;
#define E3_enable NOOP
#define E3_disable do{ stepperE3.free(); CBI(axis_known_position, E_AXIS); }while(0)
#elif E_STEPPERS > 3 && HAS_E3_ENABLE
#define E3_enable E3_ENABLE_WRITE( E_ENABLE_ON)
#define E3_disable E3_ENABLE_WRITE(!E_ENABLE_ON)
#else
#define E3_enable NOOP
#define E3_disable NOOP
#endif
#if AXIS_DRIVER_TYPE_E4(L6470)
extern L6470 stepperE4;
#define E4_enable NOOP
#define E4_disable do{ stepperE4.free(); CBI(axis_known_position, E_AXIS); }while(0)
#elif E_STEPPERS > 4 && HAS_E4_ENABLE
#define E4_enable E4_ENABLE_WRITE( E_ENABLE_ON)
#define E4_disable E4_ENABLE_WRITE(!E_ENABLE_ON)
#else
#define E4_enable NOOP
#define E4_disable NOOP
#endif
#if AXIS_DRIVER_TYPE_E5(L6470)
extern L6470 stepperE5;
#define E5_enable NOOP
#define E5_disable do{ stepperE5.free(); CBI(axis_known_position, E_AXIS); }while(0)
#elif E_STEPPERS > 5 && HAS_E5_ENABLE
#define E5_enable E5_ENABLE_WRITE( E_ENABLE_ON)
#define E5_disable E5_ENABLE_WRITE(!E_ENABLE_ON)
#else
#define E5_enable NOOP
#define E5_disable NOOP
#endif
#if ENABLED(MIXING_EXTRUDER)
/**
* Mixing steppers synchronize their enable (and direction) together
*/
#if MIXING_STEPPERS > 5
#define enable_E0() { E0_enable; E1_enable; E2_enable; E3_enable; E4_enable; E5_enable; }
#define disable_E0() { E0_disable; E1_disable; E2_disable; E3_disable; E4_disable; E5_disable; }
#elif MIXING_STEPPERS > 4
#define enable_E0() { E0_enable; E1_enable; E2_enable; E3_enable; E4_enable; }
#define disable_E0() { E0_disable; E1_disable; E2_disable; E3_disable; E4_disable; }
#elif MIXING_STEPPERS > 3
#define enable_E0() { E0_enable; E1_enable; E2_enable; E3_enable; }
#define disable_E0() { E0_disable; E1_disable; E2_disable; E3_disable; }
#elif MIXING_STEPPERS > 2
#define enable_E0() { E0_enable; E1_enable; E2_enable; }
#define disable_E0() { E0_disable; E1_disable; E2_disable; }
#else
#define enable_E0() { E0_enable; E1_enable; }
#define disable_E0() { E0_disable; E1_disable; }
#endif
#define enable_E1() NOOP
#define disable_E1() NOOP
#define enable_E2() NOOP
#define disable_E2() NOOP
#define enable_E3() NOOP
#define disable_E3() NOOP
#define enable_E4() NOOP
#define disable_E4() NOOP
#define enable_E5() NOOP
#define disable_E5() NOOP
#else // !MIXING_EXTRUDER
#if HAS_E0_ENABLE
#define enable_E0() E0_enable
#define disable_E0() E0_disable
#else
#define enable_E0() NOOP
#define disable_E0() NOOP
#endif
#if E_STEPPERS > 1 && HAS_E1_ENABLE
#define enable_E1() E1_enable
#define disable_E1() E1_disable
#else
#define enable_E1() NOOP
#define disable_E1() NOOP
#endif
#if E_STEPPERS > 2 && HAS_E2_ENABLE
#define enable_E2() E2_enable
#define disable_E2() E2_disable
#else
#define enable_E2() NOOP
#define disable_E2() NOOP
#endif
#if E_STEPPERS > 3 && HAS_E3_ENABLE
#define enable_E3() E3_enable
#define disable_E3() E3_disable
#else
#define enable_E3() NOOP
#define disable_E3() NOOP
#endif
#if E_STEPPERS > 4 && HAS_E4_ENABLE
#define enable_E4() E4_enable
#define disable_E4() E4_disable
#else
#define enable_E4() NOOP
#define disable_E4() NOOP
#endif
#if E_STEPPERS > 5 && HAS_E5_ENABLE
#define enable_E5() E5_enable
#define disable_E5() E5_disable
#else
#define enable_E5() NOOP
#define disable_E5() NOOP
#endif
#endif // !MIXING_EXTRUDER
#if ENABLED(EXPERIMENTAL_I2CBUS)
#include "feature/twibus.h"
extern TWIBus i2c;
#endif
#if ENABLED(G38_PROBE_TARGET)
extern uint8_t G38_move; // Flag to tell the ISR that G38 is in progress, and the type
extern bool G38_did_trigger; // Flag from the ISR to indicate the endstop changed
#endif
/**
* The axis order in all axis related arrays is X, Y, Z, E
*/
void enable_all_steppers();
void disable_e_stepper(const uint8_t e);
void disable_e_steppers();
void disable_all_steppers();
void kill(PGM_P const lcd_msg=NULL);
void minkill();
void quickstop_stepper();
extern bool Running;
inline bool IsRunning() { return Running; }
inline bool IsStopped() { return !Running; }
13 years ago
extern bool wait_for_heatup;
#if HAS_RESUME_CONTINUE
extern bool wait_for_user;
#endif
#if HAS_AUTO_REPORTING || ENABLED(HOST_KEEPALIVE_FEATURE)
extern bool suspend_auto_report;
#endif
// Inactivity shutdown timer
extern millis_t max_inactive_time, stepper_inactive_time;
#if ENABLED(USE_CONTROLLER_FAN)
extern uint8_t controllerfan_speed;
#endif
#if HAS_POWER_SWITCH
extern bool powersupply_on;
#define PSU_PIN_ON() do{ OUT_WRITE(PS_ON_PIN, PS_ON_AWAKE); powersupply_on = true; }while(0)
#define PSU_PIN_OFF() do{ OUT_WRITE(PS_ON_PIN, PS_ON_ASLEEP); powersupply_on = false; }while(0)
#if ENABLED(AUTO_POWER_CONTROL)
#define PSU_ON() powerManager.power_on()
#define PSU_OFF() powerManager.power_off()
#else
#define PSU_ON() PSU_PIN_ON()
#define PSU_OFF() PSU_PIN_OFF()
#endif
#endif
bool pin_is_protected(const pin_t pin);
void protected_pin_err();
7 years ago
#if HAS_SUICIDE
inline void suicide() { OUT_WRITE(SUICIDE_PIN, LOW); }
#endif
#if HAS_FILAMENT_SENSOR
void event_filament_runout();
#endif
#if ENABLED(G29_RETRY_AND_RECOVER)
void event_probe_recover();
void event_probe_failure();
#endif