Marlin 2.0 for Flying Bear 4S/5
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

297 lines
9.4 KiB

/**
* Marlin 3D Printer Firmware
5 years ago
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#pragma once
/**
* stepper/trinamic.h
* Stepper driver indirection for Trinamic
*/
#include <TMCStepper.h>
#if TMCSTEPPER_VERSION < 0x000500
#error "Update TMCStepper library to 0.5.0 or newer."
#endif
#include "../../inc/MarlinConfig.h"
#include "../../feature/tmc_util.h"
#define CLASS_TMC2130 TMC2130Stepper
#define CLASS_TMC2160 TMC2160Stepper
#define CLASS_TMC2208 TMC2208Stepper
#define CLASS_TMC2209 TMC2209Stepper
#define CLASS_TMC2660 TMC2660Stepper
#define CLASS_TMC5130 TMC5130Stepper
#define CLASS_TMC5160 TMC5160Stepper
#define TMC_X_LABEL 'X', '0'
#define TMC_Y_LABEL 'Y', '0'
#define TMC_Z_LABEL 'Z', '0'
#define TMC_X2_LABEL 'X', '2'
#define TMC_Y2_LABEL 'Y', '2'
#define TMC_Z2_LABEL 'Z', '2'
#define TMC_Z3_LABEL 'Z', '3'
#define TMC_Z4_LABEL 'Z', '4'
#define TMC_E0_LABEL 'E', '0'
#define TMC_E1_LABEL 'E', '1'
#define TMC_E2_LABEL 'E', '2'
#define TMC_E3_LABEL 'E', '3'
#define TMC_E4_LABEL 'E', '4'
#define TMC_E5_LABEL 'E', '5'
#define TMC_E6_LABEL 'E', '6'
#define TMC_E7_LABEL 'E', '7'
#define __TMC_CLASS(TYPE, L, I, A) TMCMarlin<CLASS_##TYPE, L, I, A>
#define _TMC_CLASS(TYPE, LandI, A) __TMC_CLASS(TYPE, LandI, A)
#define TMC_CLASS(ST, A) _TMC_CLASS(ST##_DRIVER_TYPE, TMC_##ST##_LABEL, A##_AXIS)
#if ENABLED(DISTINCT_E_FACTORS)
#define TMC_CLASS_E(N) TMC_CLASS(E##N, E##N)
#else
#define TMC_CLASS_E(N) TMC_CLASS(E##N, E)
#endif
typedef struct {
uint8_t toff;
int8_t hend;
uint8_t hstrt;
} chopper_timing_t;
static constexpr chopper_timing_t chopper_timing = CHOPPER_TIMING;
#if HAS_TMC220x
void tmc_serial_begin();
#endif
void restore_trinamic_drivers();
void reset_trinamic_drivers();
#define AXIS_HAS_SQUARE_WAVE(A) (AXIS_IS_TMC(A) && ENABLED(SQUARE_WAVE_STEPPING))
// X Stepper
#if AXIS_IS_TMC(X)
extern TMC_CLASS(X, X) stepperX;
#if ENABLED(SOFTWARE_DRIVER_ENABLE)
#define X_ENABLE_INIT() NOOP
#define X_ENABLE_WRITE(STATE) stepperX.toff((STATE)==X_ENABLE_ON ? chopper_timing.toff : 0)
#define X_ENABLE_READ() stepperX.isEnabled()
#endif
#if AXIS_HAS_SQUARE_WAVE(X)
#define X_STEP_WRITE(STATE) do{ if(STATE) TOGGLE(X_STEP_PIN); }while(0)
#endif
#endif
// Y Stepper
#if AXIS_IS_TMC(Y)
extern TMC_CLASS(Y, Y) stepperY;
#if ENABLED(SOFTWARE_DRIVER_ENABLE)
#define Y_ENABLE_INIT() NOOP
#define Y_ENABLE_WRITE(STATE) stepperY.toff((STATE)==Y_ENABLE_ON ? chopper_timing.toff : 0)
#define Y_ENABLE_READ() stepperY.isEnabled()
#endif
#if AXIS_HAS_SQUARE_WAVE(Y)
#define Y_STEP_WRITE(STATE) do{ if (STATE) TOGGLE(Y_STEP_PIN); }while(0)
#endif
#endif
// Z Stepper
#if AXIS_IS_TMC(Z)
extern TMC_CLASS(Z, Z) stepperZ;
#if ENABLED(SOFTWARE_DRIVER_ENABLE)
#define Z_ENABLE_INIT() NOOP
#define Z_ENABLE_WRITE(STATE) stepperZ.toff((STATE)==Z_ENABLE_ON ? chopper_timing.toff : 0)
#define Z_ENABLE_READ() stepperZ.isEnabled()
#endif
#if AXIS_HAS_SQUARE_WAVE(Z)
#define Z_STEP_WRITE(STATE) do{ if(STATE) TOGGLE(Z_STEP_PIN); }while(0)
#endif
#endif
// X2 Stepper
#if HAS_X2_ENABLE && AXIS_IS_TMC(X2)
extern TMC_CLASS(X2, X) stepperX2;
#if ENABLED(SOFTWARE_DRIVER_ENABLE)
#define X2_ENABLE_INIT() NOOP
#define X2_ENABLE_WRITE(STATE) stepperX2.toff((STATE)==X_ENABLE_ON ? chopper_timing.toff : 0)
#define X2_ENABLE_READ() stepperX2.isEnabled()
#endif
#if AXIS_HAS_SQUARE_WAVE(X2)
#define X2_STEP_WRITE(STATE) do{ if(STATE) TOGGLE(X2_STEP_PIN); }while(0)
#endif
#endif
// Y2 Stepper
#if HAS_Y2_ENABLE && AXIS_IS_TMC(Y2)
extern TMC_CLASS(Y2, Y) stepperY2;
#if ENABLED(SOFTWARE_DRIVER_ENABLE)
#define Y2_ENABLE_INIT() NOOP
#define Y2_ENABLE_WRITE(STATE) stepperY2.toff((STATE)==Y_ENABLE_ON ? chopper_timing.toff : 0)
#define Y2_ENABLE_READ() stepperY2.isEnabled()
#endif
#if AXIS_HAS_SQUARE_WAVE(Y2)
#define Y2_STEP_WRITE(STATE) do{ if(STATE) TOGGLE(Y2_STEP_PIN); }while(0)
#endif
#endif
// Z2 Stepper
#if HAS_Z2_ENABLE && AXIS_IS_TMC(Z2)
extern TMC_CLASS(Z2, Z) stepperZ2;
#if ENABLED(SOFTWARE_DRIVER_ENABLE) && AXIS_IS_TMC(Z2)
#define Z2_ENABLE_INIT() NOOP
#define Z2_ENABLE_WRITE(STATE) stepperZ2.toff((STATE)==Z_ENABLE_ON ? chopper_timing.toff : 0)
#define Z2_ENABLE_READ() stepperZ2.isEnabled()
#endif
#if AXIS_HAS_SQUARE_WAVE(Z2)
#define Z2_STEP_WRITE(STATE) do{ if(STATE) TOGGLE(Z2_STEP_PIN); }while(0)
#endif
#endif
// Z3 Stepper
#if HAS_Z3_ENABLE && AXIS_IS_TMC(Z3)
extern TMC_CLASS(Z3, Z) stepperZ3;
#if ENABLED(SOFTWARE_DRIVER_ENABLE)
#define Z3_ENABLE_INIT() NOOP
#define Z3_ENABLE_WRITE(STATE) stepperZ3.toff((STATE)==Z_ENABLE_ON ? chopper_timing.toff : 0)
#define Z3_ENABLE_READ() stepperZ3.isEnabled()
#endif
#if AXIS_HAS_SQUARE_WAVE(Z3)
#define Z3_STEP_WRITE(STATE) do{ if(STATE) TOGGLE(Z3_STEP_PIN); }while(0)
#endif
#endif
// Z4 Stepper
#if HAS_Z4_ENABLE && AXIS_IS_TMC(Z4)
extern TMC_CLASS(Z4, Z) stepperZ4;
#if ENABLED(SOFTWARE_DRIVER_ENABLE)
#define Z4_ENABLE_INIT() NOOP
#define Z4_ENABLE_WRITE(STATE) stepperZ4.toff((STATE)==Z_ENABLE_ON ? chopper_timing.toff : 0)
#define Z4_ENABLE_READ() stepperZ4.isEnabled()
#endif
#if AXIS_HAS_SQUARE_WAVE(Z4)
#define Z4_STEP_WRITE(STATE) do{ if(STATE) TOGGLE(Z4_STEP_PIN); }while(0)
#endif
#endif
// E0 Stepper
#if AXIS_IS_TMC(E0)
extern TMC_CLASS_E(0) stepperE0;
#if ENABLED(SOFTWARE_DRIVER_ENABLE) && AXIS_IS_TMC(E0)
#define E0_ENABLE_INIT() NOOP
#define E0_ENABLE_WRITE(STATE) stepperE0.toff((STATE)==E_ENABLE_ON ? chopper_timing.toff : 0)
#define E0_ENABLE_READ() stepperE0.isEnabled()
#endif
#if AXIS_HAS_SQUARE_WAVE(E0)
#define E0_STEP_WRITE(STATE) do{ if(STATE) TOGGLE(E0_STEP_PIN); }while(0)
#endif
#endif
// E1 Stepper
#if AXIS_IS_TMC(E1)
extern TMC_CLASS_E(1) stepperE1;
#if ENABLED(SOFTWARE_DRIVER_ENABLE) && AXIS_IS_TMC(E1)
#define E1_ENABLE_INIT() NOOP
#define E1_ENABLE_WRITE(STATE) stepperE1.toff((STATE)==E_ENABLE_ON ? chopper_timing.toff : 0)
#define E1_ENABLE_READ() stepperE1.isEnabled()
#endif
#if AXIS_HAS_SQUARE_WAVE(E1)
#define E1_STEP_WRITE(STATE) do{ if(STATE) TOGGLE(E1_STEP_PIN); }while(0)
#endif
#endif
// E2 Stepper
#if AXIS_IS_TMC(E2)
extern TMC_CLASS_E(2) stepperE2;
#if ENABLED(SOFTWARE_DRIVER_ENABLE) && AXIS_IS_TMC(E2)
#define E2_ENABLE_INIT() NOOP
#define E2_ENABLE_WRITE(STATE) stepperE2.toff((STATE)==E_ENABLE_ON ? chopper_timing.toff : 0)
#define E2_ENABLE_READ() stepperE2.isEnabled()
#endif
#if AXIS_HAS_SQUARE_WAVE(E2)
#define E2_STEP_WRITE(STATE) do{ if(STATE) TOGGLE(E2_STEP_PIN); }while(0)
#endif
#endif
// E3 Stepper
#if AXIS_IS_TMC(E3)
extern TMC_CLASS_E(3) stepperE3;
#if ENABLED(SOFTWARE_DRIVER_ENABLE) && AXIS_IS_TMC(E3)
#define E3_ENABLE_INIT() NOOP
#define E3_ENABLE_WRITE(STATE) stepperE3.toff((STATE)==E_ENABLE_ON ? chopper_timing.toff : 0)
#define E3_ENABLE_READ() stepperE3.isEnabled()
#endif
#if AXIS_HAS_SQUARE_WAVE(E3)
#define E3_STEP_WRITE(STATE) do{ if(STATE) TOGGLE(E3_STEP_PIN); }while(0)
#endif
#endif
// E4 Stepper
#if AXIS_IS_TMC(E4)
extern TMC_CLASS_E(4) stepperE4;
#if ENABLED(SOFTWARE_DRIVER_ENABLE) && AXIS_IS_TMC(E4)
#define E4_ENABLE_INIT() NOOP
#define E4_ENABLE_WRITE(STATE) stepperE4.toff((STATE)==E_ENABLE_ON ? chopper_timing.toff : 0)
#define E4_ENABLE_READ() stepperE4.isEnabled()
#endif
#if AXIS_HAS_SQUARE_WAVE(E4)
#define E4_STEP_WRITE(STATE) do{ if(STATE) TOGGLE(E4_STEP_PIN); }while(0)
#endif
#endif
// E5 Stepper
#if AXIS_IS_TMC(E5)
extern TMC_CLASS_E(5) stepperE5;
#if ENABLED(SOFTWARE_DRIVER_ENABLE) && AXIS_IS_TMC(E5)
#define E5_ENABLE_INIT() NOOP
#define E5_ENABLE_WRITE(STATE) stepperE5.toff((STATE)==E_ENABLE_ON ? chopper_timing.toff : 0)
#define E5_ENABLE_READ() stepperE5.isEnabled()
#endif
#if AXIS_HAS_SQUARE_WAVE(E5)
#define E5_STEP_WRITE(STATE) do{ if(STATE) TOGGLE(E5_STEP_PIN); }while(0)
#endif
#endif
// E6 Stepper
#if AXIS_IS_TMC(E6)
extern TMC_CLASS_E(6) stepperE6;
#if ENABLED(SOFTWARE_DRIVER_ENABLE) && AXIS_IS_TMC(E6)
#define E6_ENABLE_INIT() NOOP
#define E6_ENABLE_WRITE(STATE) stepperE6.toff((STATE)==E_ENABLE_ON ? chopper_timing.toff : 0)
#define E6_ENABLE_READ() stepperE6.isEnabled()
#endif
#if AXIS_HAS_SQUARE_WAVE(E6)
#define E6_STEP_WRITE(STATE) do{ if(STATE) TOGGLE(E6_STEP_PIN); }while(0)
#endif
#endif
// E7 Stepper
#if AXIS_IS_TMC(E7)
extern TMC_CLASS_E(7) stepperE7;
#if ENABLED(SOFTWARE_DRIVER_ENABLE) && AXIS_IS_TMC(E7)
#define E7_ENABLE_INIT() NOOP
#define E7_ENABLE_WRITE(STATE) stepperE7.toff((STATE)==E_ENABLE_ON ? chopper_timing.toff : 0)
#define E7_ENABLE_READ() stepperE7.isEnabled()
#endif
#if AXIS_HAS_SQUARE_WAVE(E7)
#define E7_STEP_WRITE(STATE) do{ if(STATE) TOGGLE(E7_STEP_PIN); }while(0)
#endif
#endif