Marlin 2.0 for Flying Bear 4S/5
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

267 lines
9.1 KiB

/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#include "../inc/MarlinConfig.h"
#if HAS_TRINAMIC
#include "tmc_util.h"
#include "../Marlin.h"
#include "../module/stepper_indirection.h"
#include "../module/printcounter.h"
#include "../libs/duration_t.h"
#include "../gcode/gcode.h"
template<typename TMC>
void tmc_get_current(TMC &st, const char name[]) {
SERIAL_ECHO(name);
SERIAL_ECHOPGM(" axis driver current: ");
SERIAL_ECHOLN(st.getCurrent());
}
template<typename TMC>
void tmc_set_current(TMC &st, const char name[], const int mA) {
st.setCurrent(mA, R_SENSE, HOLD_MULTIPLIER);
tmc_get_current(st, name);
}
template<typename TMC>
void tmc_report_otpw(TMC &st, const char name[]) {
SERIAL_ECHO(name);
SERIAL_ECHOPGM(" axis temperature prewarn triggered: ");
serialprintPGM(st.getOTPW() ? PSTR("true") : PSTR("false"));
SERIAL_EOL();
}
template<typename TMC>
void tmc_clear_otpw(TMC &st, const char name[]) {
st.clear_otpw();
SERIAL_ECHO(name);
SERIAL_ECHOLNPGM(" prewarn flag cleared");
}
template<typename TMC>
void tmc_get_pwmthrs(TMC &st, const char name[], const uint16_t spmm) {
SERIAL_ECHO(name);
SERIAL_ECHOPGM(" stealthChop max speed set to ");
SERIAL_ECHOLN(12650000UL * st.microsteps() / (256 * st.TPWMTHRS() * spmm));
}
template<typename TMC>
void tmc_set_pwmthrs(TMC &st, const char name[], const int32_t thrs, const uint32_t spmm) {
st.TPWMTHRS(12650000UL * st.microsteps() / (256 * thrs * spmm));
tmc_get_pwmthrs(st, name, spmm);
}
template<typename TMC>
void tmc_get_sgt(TMC &st, const char name[]) {
SERIAL_ECHO(name);
SERIAL_ECHOPGM(" driver homing sensitivity set to ");
MYSERIAL.println(st.sgt(), DEC);
}
template<typename TMC>
void tmc_set_sgt(TMC &st, const char name[], const int8_t sgt_val) {
st.sgt(sgt_val);
tmc_get_sgt(st, name);
}
/*
* Check for over temperature or short to ground error flags.
* Report and log warning of overtemperature condition.
* Reduce driver current in a persistent otpw condition.
* Keep track of otpw counter so we don't reduce current on a single instance,
* and so we don't repeatedly report warning before the condition is cleared.
*/
#if ENABLED(MONITOR_DRIVER_STATUS)
struct TMC_driver_data {
uint32_t drv_status;
bool is_otpw;
bool is_ot;
bool is_error;
};
#if ENABLED(HAVE_TMC2130)
static uint32_t get_pwm_scale(TMC2130Stepper &st) { return st.PWM_SCALE(); }
static uint8_t get_status_response(TMC2130Stepper &st) { return st.status_response&0xF; }
static TMC_driver_data get_driver_data(TMC2130Stepper &st) {
constexpr uint32_t OTPW_bm = 0x4000000UL;
constexpr uint8_t OTPW_bp = 26;
constexpr uint32_t OT_bm = 0x2000000UL;
constexpr uint8_t OT_bp = 25;
constexpr uint8_t DRIVER_ERROR_bm = 0x2UL;
constexpr uint8_t DRIVER_ERROR_bp = 1;
TMC_driver_data data;
data.drv_status = st.DRV_STATUS();
data.is_otpw = (data.drv_status & OTPW_bm)>>OTPW_bp;
data.is_ot = (data.drv_status & OT_bm)>>OT_bp;
data.is_error = (st.status_response & DRIVER_ERROR_bm)>>DRIVER_ERROR_bp;
return data;
}
#endif
#if ENABLED(HAVE_TMC2208)
static uint32_t get_pwm_scale(TMC2208Stepper &st) { return st.pwm_scale_sum(); }
static uint8_t get_status_response(TMC2208Stepper &st) {
uint32_t drv_status = st.DRV_STATUS();
uint8_t gstat = st.GSTAT();
uint8_t response = 0;
response |= (drv_status >> (31-3)) & 0b1000;
response |= gstat & 0b11;
return response;
}
static TMC_driver_data get_driver_data(TMC2208Stepper &st) {
constexpr uint32_t OTPW_bm = 0b1ul;
constexpr uint8_t OTPW_bp = 0;
constexpr uint32_t OT_bm = 0b10ul;
constexpr uint8_t OT_bp = 1;
TMC_driver_data data;
data.drv_status = st.DRV_STATUS();
data.is_otpw = (data.drv_status & OTPW_bm)>>OTPW_bp;
data.is_ot = (data.drv_status & OT_bm)>>OT_bp;
data.is_error = st.drv_err();
return data;
}
#endif
template<typename TMC>
uint8_t monitor_tmc_driver(TMC &st, const char axisID, uint8_t otpw_cnt) {
TMC_driver_data data = get_driver_data(st);
#if ENABLED(STOP_ON_ERROR)
if (data.is_error) {
SERIAL_EOL();
SERIAL_ECHO(axisID);
SERIAL_ECHO(" driver error detected:");
if (data.is_ot) SERIAL_ECHO("\novertemperature");
if (st.s2ga()) SERIAL_ECHO("\nshort to ground (coil A)");
if (st.s2gb()) SERIAL_ECHO("\nshort to ground (coil B)");
SERIAL_EOL();
#if ENABLED(TMC_DEBUG)
_M122();
#endif
kill(PSTR("Driver error"));
}
#endif
// Report if a warning was triggered
if (data.is_otpw && otpw_cnt==0) {
char timestamp[10];
duration_t elapsed = print_job_timer.duration();
const bool has_days = (elapsed.value > 60*60*24L);
(void)elapsed.toDigital(timestamp, has_days);
SERIAL_EOL();
SERIAL_ECHO(timestamp);
SERIAL_ECHOPGM(": ");
SERIAL_ECHO(axisID);
SERIAL_ECHOPGM(" driver overtemperature warning! (");
SERIAL_ECHO(st.getCurrent());
SERIAL_ECHOLN("mA)");
}
#if CURRENT_STEP_DOWN > 0
// Decrease current if is_otpw is true and driver is enabled and there's been more then 4 warnings
if (data.is_otpw && !st.isEnabled() && otpw_cnt > 4) {
st.setCurrent(st.getCurrent() - CURRENT_STEP_DOWN, R_SENSE, HOLD_MULTIPLIER);
#if ENABLED(REPORT_CURRENT_CHANGE)
SERIAL_ECHO(axisID);
SERIAL_ECHOLNPAIR(" current decreased to ", st.getCurrent());
#endif
}
#endif
if (data.is_otpw) {
otpw_cnt++;
st.flag_otpw = true;
}
else if (otpw_cnt>0) otpw_cnt--;
if (report_tmc_status) {
const uint32_t pwm_scale = get_pwm_scale(st);
SERIAL_ECHO(axisID);
SERIAL_ECHOPAIR(":", pwm_scale);
SERIAL_ECHO(" |0b"); MYSERIAL.print(get_status_response(st), BIN);
SERIAL_ECHO("| ");
if (data.is_error) SERIAL_ECHO('E');
else if (data.is_ot) SERIAL_ECHO('O');
else if (data.is_otpw) SERIAL_ECHO('W');
else if (otpw_cnt>0) MYSERIAL.print(otpw_cnt, DEC);
else if (st.flag_otpw) SERIAL_ECHO('F');
SERIAL_ECHO("\t");
}
return otpw_cnt;
}
#define HAS_HW_COMMS(ST) ENABLED(ST##_IS_TMC2130)|| (ENABLED(ST##_IS_TMC2208) && defined(ST##_HARDWARE_SERIAL))
void monitor_tmc_driver() {
static millis_t next_cOT = 0;
if (ELAPSED(millis(), next_cOT)) {
next_cOT = millis() + 500;
#if HAS_HW_COMMS(X) || ENABLED(IS_TRAMS)
static uint8_t x_otpw_cnt = 0;
x_otpw_cnt = monitor_tmc_driver(stepperX, axis_codes[X_AXIS], x_otpw_cnt);
#endif
#if HAS_HW_COMMS(Y) || ENABLED(IS_TRAMS)
static uint8_t y_otpw_cnt = 0;
y_otpw_cnt = monitor_tmc_driver(stepperY, axis_codes[Y_AXIS], y_otpw_cnt);
#endif
#if HAS_HW_COMMS(Z) || ENABLED(IS_TRAMS)
static uint8_t z_otpw_cnt = 0;
z_otpw_cnt = monitor_tmc_driver(stepperZ, axis_codes[Z_AXIS], z_otpw_cnt);
#endif
#if HAS_HW_COMMS(X2)
static uint8_t x2_otpw_cnt = 0;
x2_otpw_cnt = monitor_tmc_driver(stepperX2, axis_codes[X_AXIS], x2_otpw_cnt);
#endif
#if HAS_HW_COMMS(Y2)
static uint8_t y2_otpw_cnt = 0;
y2_otpw_cnt = monitor_tmc_driver(stepperY2, axis_codes[Y_AXIS], y2_otpw_cnt);
#endif
#if HAS_HW_COMMS(Z2)
static uint8_t z2_otpw_cnt = 0;
z2_otpw_cnt = monitor_tmc_driver(stepperZ2, axis_codes[Z_AXIS], z2_otpw_cnt);
#endif
#if HAS_HW_COMMS(E0) || ENABLED(IS_TRAMS)
static uint8_t e0_otpw_cnt = 0;
e0_otpw_cnt = monitor_tmc_driver(stepperE0, axis_codes[E_AXIS], e0_otpw_cnt);
#endif
#if HAS_HW_COMMS(E1)
static uint8_t e1_otpw_cnt = 0;
e1_otpw_cnt = monitor_tmc_driver(stepperE1, axis_codes[E_AXIS], e1_otpw_cnt);
#endif
#if HAS_HW_COMMS(E2)
static uint8_t e2_otpw_cnt = 0;
e2_otpw_cnt = monitor_tmc_driver(stepperE2, axis_codes[E_AXIS], e2_otpw_cnt);
#endif
#if HAS_HW_COMMS(E3)
static uint8_t e3_otpw_cnt = 0;
e3_otpw_cnt = monitor_tmc_driver(stepperE3, axis_codes[E_AXIS], e3_otpw_cnt);
#endif
#if HAS_HW_COMMS(E4)
static uint8_t e4_otpw_cnt = 0;
e4_otpw_cnt = monitor_tmc_driver(stepperE4, axis_codes[E_AXIS], e4_otpw_cnt);
#endif
if (report_tmc_status) SERIAL_EOL();
}
}
#endif // MONITOR_DRIVER_STATUS
#endif // HAS_TRINAMIC