Marlin 2.0 for Flying Bear 4S/5
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

445 lines
15 KiB

#
# Marlin Firmware
# PlatformIO Configuration File
#
#################################
#
# STM32F4 Architecture
#
# Naming Example: STM32F401RGT6
#
# F : Foundation (sometimes High Performance F2/F4)
# 4 : Cortex M4 core
# 01 : Line/Features
# R : 64 or 66 pins (V:100, Z:144, I:176)
# G : 1024KB Flash-memory (C:256KB, D:384KB, E:512KB)
# T : LQFP package
# 6 : -40...85°C (7: ...105°C)
#
#################################
#
# ARMED (STM32)
#
[env:ARMED]
platform = ${common_stm32.platform}
extends = common_stm32
board = armed_v1
build_flags = ${common_stm32.build_flags}
-O2 -ffreestanding -fsigned-char -fno-move-loop-invariants -fno-strict-aliasing
#
# STM32F401VE
# 'STEVAL-3DP001V1' STM32F401VE board - https://www.st.com/en/evaluation-tools/steval-3dp001v1.html
#
[env:STM32F401VE_STEVAL]
platform = ${common_stm32.platform}
extends = common_stm32
board = marlin_STEVAL_STM32F401VE
build_flags = ${common_stm32.build_flags}
-DARDUINO_STEVAL -DSTM32F401xE
-DDISABLE_GENERIC_SERIALUSB -DUSBD_USE_CDC_COMPOSITE -DUSE_USB_FS
extra_scripts = ${common.extra_scripts}
pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py
#
# STM32F401RC
#
[env:FYSETC_CHEETAH_V20]
platform = ${common_stm32.platform}
extends = common_stm32
board = marlin_FYSETC_CHEETAH_V20
build_flags = ${common_stm32.build_flags} -DSTM32F401xC -DVECT_TAB_OFFSET=0xC000
extra_scripts = ${common.extra_scripts}
pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py
#
# FLYF407ZG
#
[env:FLYF407ZG]
platform = ${common_stm32.platform}
extends = common_stm32
board = marlin_STM32F407ZGT6
board_build.variant = MARLIN_FLY_F407ZG
upload_protocol = dfu
build_flags = ${common_stm32.build_flags}
-DVECT_TAB_OFFSET=0x8000
extra_scripts = ${common.extra_scripts}
pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py
#
# FYSETC S6 (STM32F446RET6 ARM Cortex-M4)
#
[env:FYSETC_S6]
platform = ${common_stm32.platform}
extends = common_stm32
platform_packages = tool-stm32duino
board = marlin_fysetc_s6
build_flags = ${common_stm32.build_flags} -DVECT_TAB_OFFSET=0x10000 -DHAL_PCD_MODULE_ENABLED
extra_scripts = ${common.extra_scripts}
pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py
debug_tool = stlink
upload_protocol = dfu
upload_command = dfu-util -a 0 -s 0x08010000:leave -D "$SOURCE"
#
# FYSETC S6 new bootloader
#
[env:FYSETC_S6_8000]
platform = ${common_stm32.platform}
extends = env:FYSETC_S6
board = marlin_fysetc_s6_8000
board_build.offset = 0x8000
board_upload.offset_address = 0x08008000
build_flags = ${common_stm32.build_flags} -DHAL_PCD_MODULE_ENABLED
extra_scripts = ${common.extra_scripts}
pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py
buildroot/share/PlatformIO/scripts/stm32_bootloader.py
upload_command = dfu-util -a 0 -s 0x08008000:leave -D "$SOURCE"
#
# STM32F407VET6 with RAMPS-like shield
# 'Black' STM32F407VET6 board - https://wiki.stm32duino.com/index.php?title=STM32F407
# Shield - https://github.com/jmz52/Hardware
#
[env:STM32F407VE_black]
platform = ${common_stm32.platform}
extends = common_stm32
board = marlin_blackSTM32F407VET6
build_flags = ${common_stm32.build_flags}
-DARDUINO_BLACK_F407VE
-DUSBD_USE_CDC_COMPOSITE -DUSE_USB_FS
extra_scripts = ${common.extra_scripts}
pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py
#
# Anet ET4-MB_V1.x/ET4P-MB_V1.x (STM32F407VGT6 ARM Cortex-M4)
# For use with with davidtgbe's OpenBLT bootloader https://github.com/davidtgbe/openblt/releases
# Comment out board_build.offset = 0x10000 if you don't plan to use OpenBLT/flashing directly to 0x08000000.
#
[env:Anet_ET4_OpenBLT]
platform = ${common_stm32.platform}
extends = common_stm32
build_flags = ${common_stm32.build_flags} -DHAL_SD_MODULE_ENABLED -DHAL_SRAM_MODULE_ENABLED
board = marlin_STM32F407VGT6_CCM
board_build.core = stm32
board_build.variant = MARLIN_F4x7Vx
board_build.ldscript = ldscript.ld
board_build.encrypt = firmware.srec
# Just openblt.py (not stm32_bootloader.py) generates the file
board_build.offset = 0x10000
board_upload.offset_address = 0x08010000
build_unflags = ${common_stm32.build_unflags} -DUSBCON -DUSBD_USE_CDC -DUSBD_VID=0x0483
debug_tool = jlink
upload_protocol = jlink
extra_scripts = ${common.extra_scripts}
pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py
buildroot/share/PlatformIO/scripts/stm32_bootloader.py
buildroot/share/PlatformIO/scripts/openblt.py
#
# BigTreeTech SKR Pro (STM32F407ZGT6 ARM Cortex-M4)
#
[env:BIGTREE_SKR_PRO]
platform = ${common_stm32.platform}
extends = common_stm32
board = marlin_BigTree_SKR_Pro
build_flags = ${common_stm32.build_flags}
-DSTM32F407_5ZX -DVECT_TAB_OFFSET=0x8000
extra_scripts = ${common.extra_scripts}
pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py
#upload_protocol = stlink
#upload_command = "$PROJECT_PACKAGES_DIR/tool-stm32duino/stlink/ST-LINK_CLI.exe" -c SWD -P "$BUILD_DIR/firmware.bin" 0x8008000 -Rst -Run
debug_tool = stlink
debug_init_break =
#
# USB Flash Drive mix-ins for STM32
#
[stm_flash_drive]
platform_packages = framework-arduinoststm32@https://github.com/rhapsodyv/Arduino_Core_STM32/archive/usb-host-msc-cdc-msc-3.zip
build_flags = ${common_stm32.build_flags}
-DHAL_PCD_MODULE_ENABLED -DHAL_HCD_MODULE_ENABLED
-DUSBHOST -DUSBH_IRQ_PRIO=3 -DUSBH_IRQ_SUBPRIO=4
#
# BigTreeTech SKR Pro (STM32F407ZGT6 ARM Cortex-M4) with USB Flash Drive Support
#
[env:BIGTREE_SKR_PRO_usb_flash_drive]
extends = env:BIGTREE_SKR_PRO
platform_packages = ${stm_flash_drive.platform_packages}
build_unflags = -DUSBCON -DUSBD_USE_CDC
build_flags = ${stm_flash_drive.build_flags}
-DSTM32F407_5ZX -DVECT_TAB_OFFSET=0x8000
#
# BigTreeTech E3 RRF (STM32F407VGT6 ARM Cortex-M4)
#
[env:BIGTREE_E3_RRF]
platform = ${common_stm32.platform}
extends = common_stm32
board = marlin_STM32F407VGT6_CCM
board_build.variant = MARLIN_BIGTREE_E3_RRF
build_flags = ${common_stm32.build_flags}
-DSTM32F407_5VX -DVECT_TAB_OFFSET=0x8000
-DSERIAL_RX_BUFFER_SIZE=255 -DSERIAL_TX_BUFFER_SIZE=255
extra_scripts = ${common.extra_scripts}
pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py
#
# Bigtreetech GTR V1.0 (STM32F407IGT6 ARM Cortex-M4)
#
[env:BIGTREE_GTR_V1_0]
platform = ${common_stm32.platform}
extends = common_stm32
board = marlin_BigTree_GTR_v1
extra_scripts = ${common.extra_scripts}
pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py
build_flags = ${common_stm32.build_flags}
-DSTM32F407IX -DVECT_TAB_OFFSET=0x8000
#
# Bigtreetech GTR V1.0 (STM32F407IGT6 ARM Cortex-M4) with USB Flash Drive Support
#
[env:BIGTREE_GTR_V1_0_usb_flash_drive]
extends = env:BIGTREE_GTR_V1_0
platform_packages = ${stm_flash_drive.platform_packages}
build_unflags = -DUSBCON -DUSBD_USE_CDC
build_flags = ${stm_flash_drive.build_flags}
-DSTM32F407IX -DVECT_TAB_OFFSET=0x8000
#
# BigTreeTech BTT002 V1.0 (STM32F407VGT6 ARM Cortex-M4)
#
[env:BIGTREE_BTT002]
platform = ${common_stm32.platform}
extends = common_stm32
board = marlin_BigTree_BTT002
build_flags = ${common_stm32.build_flags}
-DSTM32F407_5VX -DVECT_TAB_OFFSET=0x8000
-DHAVE_HWSERIAL2
-DHAVE_HWSERIAL3
-DPIN_SERIAL2_RX=PD_6
-DPIN_SERIAL2_TX=PD_5
extra_scripts = ${common.extra_scripts}
pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py
#
# BigTreeTech SKR V2.0 (STM32F407VGT6 ARM Cortex-M4) with USB Flash Drive Support
#
[env:BIGTREE_SKR_2]
platform = ${common_stm32.platform}
platform_packages = ${stm_flash_drive.platform_packages}
extends = common_stm32
board = marlin_STM32F407VGT6_CCM
board_build.core = stm32
board_build.variant = MARLIN_F4x7Vx
board_build.ldscript = ldscript.ld
board_build.offset = 0x8000
board_upload.offset_address = 0x08008000
extra_scripts = ${common.extra_scripts}
pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py
buildroot/share/PlatformIO/scripts/stm32_bootloader.py
build_flags = ${stm_flash_drive.build_flags}
-DUSE_USBHOST_HS -DUSE_USB_HS_IN_FS -DUSBD_IRQ_PRIO=5 -DUSBD_IRQ_SUBPRIO=6
-DHSE_VALUE=8000000U -DHAL_SD_MODULE_ENABLED
#
# BigTreeTech Octopus V1.0/1.1 (STM32F446ZET6 ARM Cortex-M4)
#
[env:BIGTREE_OCTOPUS_V1]
platform = ${common_stm32.platform}
extends = common_stm32
board = marlin_BigTree_Octopus_v1
extra_scripts = ${common.extra_scripts}
pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py
build_flags = ${common_stm32.build_flags}
-DSTM32F446_5VX -DVECT_TAB_OFFSET=0x8000 -DUSE_USB_HS_IN_FS
#
# BigTreeTech Octopus V1.0/1.1 (STM32F446ZET6 ARM Cortex-M4) with USB Flash Drive Support
#
[env:BIGTREE_OCTOPUS_V1_USB]
extends = env:BIGTREE_OCTOPUS_V1
platform_packages = ${stm_flash_drive.platform_packages}
#build_unflags = -DUSBCON -DUSBD_USE_CDC
build_flags = ${stm_flash_drive.build_flags}
-DSTM32F446_5VX -DVECT_TAB_OFFSET=0x8000
-DUSBCON -DUSE_USBHOST_HS -DUSBD_IRQ_PRIO=5 -DUSBD_IRQ_SUBPRIO=6 -DUSE_USB_HS_IN_FS -DUSBD_USE_CDC_MSC
#
# Lerdge base
#
[lerdge_common]
platform = ${common_stm32.platform}
extends = common_stm32
board = marlin_STM32F407ZGT6
board_build.variant = MARLIN_LERDGE
board_build.offset = 0x10000
board_build.encrypt = firmware.bin
extra_scripts = ${common.extra_scripts}
pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py
buildroot/share/PlatformIO/scripts/stm32_bootloader.py
buildroot/share/PlatformIO/scripts/lerdge.py
build_flags = ${common_stm32.build_flags}
-DSTM32F4 -DSTM32F4xx -DTARGET_STM32F4
-DDISABLE_GENERIC_SERIALUSB -DARDUINO_ARCH_STM32 -DARDUINO_LERDGE
-DHAL_SRAM_MODULE_ENABLED
build_unflags = ${common_stm32.build_unflags} -DUSBCON -DUSBD_USE_CDC -DUSBD_VID=0x0483
#
# Lerdge X
#
[env:LERDGEX]
platform = ${lerdge_common.platform}
extends = lerdge_common
board_build.encrypt = Lerdge_X_firmware_force.bin
#
# Lerdge X with USB Flash Drive Support
#
[env:LERDGEX_usb_flash_drive]
platform = ${env:LERDGEX.platform}
extends = env:LERDGEX
platform_packages = ${stm_flash_drive.platform_packages}
build_flags = ${stm_flash_drive.build_flags} ${lerdge_common.build_flags}
#
# Lerdge S
#
[env:LERDGES]
platform = ${lerdge_common.platform}
extends = lerdge_common
board_build.encrypt = Lerdge_firmware_force.bin
#
# Lerdge S with USB Flash Drive Support
#
[env:LERDGES_usb_flash_drive]
platform = ${env:LERDGES.platform}
extends = env:LERDGES
platform_packages = ${stm_flash_drive.platform_packages}
build_flags = ${stm_flash_drive.build_flags} ${lerdge_common.build_flags}
#
# Lerdge K
#
[env:LERDGEK]
platform = ${lerdge_common.platform}
extends = lerdge_common
board_build.encrypt = Lerdge_K_firmware_force.bin
build_flags = ${lerdge_common.build_flags} -DLERDGEK
#
# Lerdge K with USB Flash Drive Support
#
[env:LERDGEK_usb_flash_drive]
platform = ${env:LERDGEK.platform}
extends = env:LERDGEK
platform_packages = ${stm_flash_drive.platform_packages}
build_flags = ${stm_flash_drive.build_flags} ${lerdge_common.build_flags}
#
# RUMBA32
#
[env:rumba32]
platform = ${common_stm32.platform}
extends = common_stm32
build_flags = ${common_stm32.build_flags}
-Os
-DHAL_PCD_MODULE_ENABLED
-DDISABLE_GENERIC_SERIALUSB
-DHAL_UART_MODULE_ENABLED
-DTIMER_SERIAL=TIM9
board = rumba32_f446ve
upload_protocol = dfu
monitor_speed = 500000
board_build.core = stm32
board_build.variant = MARLIN_F446VE
board_build.ldscript = ldscript.ld
board_build.offset = 0x0000
extra_scripts = ${common.extra_scripts}
pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py
buildroot/share/PlatformIO/scripts/stm32_bootloader.py
#
# MKS Robin Pro V2
#
[env:mks_robin_pro2]
platform = ${common_stm32.platform}
platform_packages = ${stm_flash_drive.platform_packages}
extends = common_stm32
build_flags = ${stm_flash_drive.build_flags}
board = genericSTM32F407VET6
board_build.core = stm32
board_build.variant = MARLIN_F4x7Vx
board_build.ldscript = ldscript.ld
board_build.offset = 0x0000
board_upload.offset_address = 0x08000000
build_unflags = ${common_stm32.build_unflags} -DUSBCON -DUSBD_USE_CDC
debug_tool = jlink
upload_protocol = jlink
extra_scripts = ${common.extra_scripts}
pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py
buildroot/share/PlatformIO/scripts/stm32_bootloader.py
#
# This SPI is used by Robin Nano V3
#
[stm32f4_I2C1]
build_flags = -DPIN_WIRE_SCL=PB6 -DPIN_WIRE_SDA=PB7
#
# MKS Robin Nano V3
#
[env:mks_robin_nano_v3]
platform = ${common_stm32.platform}
extends = common_stm32
build_flags = ${common_stm32.build_flags} ${stm32f4_I2C1.build_flags} -DHAL_PCD_MODULE_ENABLED -DUSBCON -DUSBD_USE_CDC
board = marlin_STM32F407VGT6_CCM
board_build.core = stm32
board_build.variant = MARLIN_F4x7Vx
board_build.ldscript = ldscript.ld
board_build.rename = Robin_nano_v3.bin
board_build.offset = 0xC000
board_upload.offset_address = 0x0800C000
build_unflags = ${common_stm32.build_unflags}
debug_tool = jlink
upload_protocol = jlink
extra_scripts = ${common.extra_scripts}
pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py
buildroot/share/PlatformIO/scripts/stm32_bootloader.py
#
# MKS Robin Nano V3 with USB Flash Drive Support
# Currently, using a STM32duino fork, until USB Host get merged
#
[env:mks_robin_nano_v3_usb_flash_drive]
extends = env:mks_robin_nano_v3
platform_packages = ${stm_flash_drive.platform_packages}
build_flags = ${stm_flash_drive.build_flags} ${stm32f4_I2C1.build_flags}
-DUSBCON
-DUSE_USBHOST_HS
-DUSBD_IRQ_PRIO=5
-DUSBD_IRQ_SUBPRIO=6
-DUSE_USB_HS_IN_FS
-DUSBD_USE_CDC
#
# MKS Robin Nano V3 with USB Flash Drive Support and Shared Media
# Currently, using a STM32duino fork, until USB Host and USB Device MSC get merged
#
[env:mks_robin_nano_v3_usb_flash_drive_msc]
platform = ${common_stm32.platform}
extends = env:mks_robin_nano_v3
platform_packages = framework-arduinoststm32@https://github.com/rhapsodyv/Arduino_Core_STM32/archive/usb-host-msc-cdc-msc-3.zip
build_unflags = ${common_stm32.build_unflags} -DUSBD_USE_CDC
build_flags = ${stm_flash_drive.build_flags} ${stm32f4_I2C1.build_flags}
-DUSBCON
-DUSE_USBHOST_HS
-DUSBD_IRQ_PRIO=5
-DUSBD_IRQ_SUBPRIO=6
-DUSE_USB_HS_IN_FS
-DUSBD_USE_CDC_MSC