Marlin 2.0 for Flying Bear 4S/5
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

98 lines
2.4 KiB

/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* bq ZUM Mega 3D board definition
*/
#ifndef __AVR_ATmega2560__
#error "Oops! Make sure you have 'Arduino Mega 2560' selected from the 'Tools -> Boards' menu."
#endif
#define BOARD_NAME "ZUM Mega 3D"
//
// Heaters / Fans
//
#define RAMPS_D8_PIN 10
#define RAMPS_D9_PIN 12
#define RAMPS_D10_PIN 9
#define MOSFET_D_PIN 7
//
// Auto fans
//
#define ORIG_E0_AUTO_FAN_PIN 11
#define ORIG_E1_AUTO_FAN_PIN 6
#define ORIG_E2_AUTO_FAN_PIN 6
#define ORIG_E3_AUTO_FAN_PIN 6
#include "pins_RAMPS_13.h"
//
// Limit Switches
//
#undef X_MAX_PIN
#define X_MAX_PIN 79 // 2
//
// Z Probe (when not Z_MIN_PIN)
//
#undef Z_MIN_PROBE_PIN
#define Z_MIN_PROBE_PIN 19 // IND_S_5V
#undef Z_ENABLE_PIN
#define Z_ENABLE_PIN 77 // 62
//
// Steppers
//
#define DIGIPOTSS_PIN 22
#define DIGIPOT_CHANNELS { 4, 5, 3, 0, 1 }
//
// Temperature Sensors
//
#undef TEMP_1_PIN
#define TEMP_1_PIN 14 // Analog Input (15)
#undef TEMP_BED_PIN
#define TEMP_BED_PIN 15 // Analog Input (14)
//
// Misc. Functions
//
#undef PS_ON_PIN // 12
#define PS_ON_PIN 81 // External Power Supply
// This board has headers for Z-min, Z-max and IND_S_5V *but* as the bq team
// decided to ship the printer only with the probe and no additional Z-min
// endstop and the instruction manual advises the user to connect the probe to
// IND_S_5V the option Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN will not work.
#ifdef Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
#undef Z_MIN_PIN
#undef Z_MAX_PIN
#define Z_MIN_PIN 19 // IND_S_5V
#define Z_MAX_PIN 18 // Z-MIN Label
#endif