Marlin_FB4S/Marlin/language_pl.h

/**
 * Marlin 3D Printer Firmware
 * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 3 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <http://www.gnu.org/licenses/>.
 *
 */

/**
 * Polish
 *
 * LCD Menu Messages
 * See also https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language
 *
 */
#ifndef LANGUAGE_PL_H
#define LANGUAGE_PL_H

#define DISPLAY_CHARSET_ISO10646_1

#define WELCOME_MSG                         MACHINE_NAME _UxGT(" gotowy.")
#define MSG_SD_INSERTED                     _UxGT("Karta wlozona")
#define MSG_SD_REMOVED                      _UxGT("Karta usunieta")
#define MSG_LCD_ENDSTOPS                    _UxGT("Krancow.") // Max length 8 characters
#define MSG_MAIN                            _UxGT("Menu glowne")
#define MSG_AUTOSTART                       _UxGT("Autostart")
#define MSG_DISABLE_STEPPERS                _UxGT("Wylacz silniki")
#define MSG_AUTO_HOME                       _UxGT("Pozycja zerowa")
#define MSG_AUTO_HOME_X                     _UxGT("Home X")
#define MSG_AUTO_HOME_Y                     _UxGT("Home Y")
#define MSG_AUTO_HOME_Z                     _UxGT("Home Z")
#define MSG_LEVEL_BED_HOMING                _UxGT("Pozycja zerowa")
#define MSG_LEVEL_BED_WAITING               _UxGT("Kliknij by rozp.")
#define MSG_LEVEL_BED_NEXT_POINT            _UxGT("Nastepny punkt")
#define MSG_LEVEL_BED_DONE                  _UxGT("Wypoziomowano!")
#define MSG_LEVEL_BED_CANCEL                _UxGT("Anuluj")
#define MSG_SET_HOME_OFFSETS                _UxGT("Ust. poz. zer.")
#define MSG_HOME_OFFSETS_APPLIED            _UxGT("Poz. zerowa ust.")
#define MSG_SET_ORIGIN                      _UxGT("Ustaw punkt zero")
#define MSG_PREHEAT_1                       _UxGT("Rozgrzej PLA")
#define MSG_PREHEAT_1_N                     MSG_PREHEAT_1 _UxGT(" ")
#define MSG_PREHEAT_1_ALL                   MSG_PREHEAT_1 _UxGT(" All")
#define MSG_PREHEAT_1_BEDONLY               _UxGT("Rozgrzej stol PLA")
#define MSG_PREHEAT_1_SETTINGS              _UxGT("Ustaw. rozg. PLA")
#define MSG_PREHEAT_2                       _UxGT("Rozgrzej ABS")
#define MSG_PREHEAT_2_N                     MSG_PREHEAT_2 _UxGT(" ")
#define MSG_PREHEAT_2_ALL                   MSG_PREHEAT_2 _UxGT(" All")
#define MSG_PREHEAT_2_BEDONLY               _UxGT("Rozgrzej stol ABS")
#define MSG_PREHEAT_2_SETTINGS              _UxGT("Ustaw. rozg. ABS")
#define MSG_COOLDOWN                        _UxGT("Chlodzenie")
#define MSG_SWITCH_PS_ON                    _UxGT("Wlacz zasilacz")
#define MSG_SWITCH_PS_OFF                   _UxGT("Wylacz zasilacz")
#define MSG_EXTRUDE                         _UxGT("Ekstruzja")
#define MSG_RETRACT                         _UxGT("Wycofanie")
#define MSG_MOVE_AXIS                       _UxGT("Ruch osi")
#define MSG_LEVEL_BED                       _UxGT("Poziom. stolu")
#define MSG_MOVE_X                          _UxGT("Przesun w X")
#define MSG_MOVE_Y                          _UxGT("Przesun w Y")
#define MSG_MOVE_Z                          _UxGT("Przesun w Z")
#define MSG_MOVE_E                          _UxGT("Ekstruzja (os E)")
#define MSG_MOVE_01MM                       _UxGT("Przesun co .1mm")
#define MSG_MOVE_1MM                        _UxGT("Przesun co 1mm")
#define MSG_MOVE_10MM                       _UxGT("Przesun co 10mm")
#define MSG_SPEED                           _UxGT("Predkosc")
#define MSG_BED_Z                           _UxGT("Stol Z")
#define MSG_NOZZLE                          _UxGT("Dysza")
#define MSG_BED                             _UxGT("Stol")
#define MSG_FAN_SPEED                       _UxGT("Obroty wiatraka")
#define MSG_FLOW                            _UxGT("Przeplyw")
#define MSG_CONTROL                         _UxGT("Ustawienia")
#define MSG_MIN                             LCD_STR_THERMOMETER _UxGT(" Min")
#define MSG_MAX                             LCD_STR_THERMOMETER _UxGT(" Max")
#define MSG_FACTOR                          LCD_STR_THERMOMETER _UxGT(" Mnoznik")
#define MSG_AUTOTEMP                        _UxGT("Auto. temperatura")
#define MSG_ON                              _UxGT("Wl. ")
#define MSG_OFF                             _UxGT("Wyl.")
#define MSG_PID_P                           _UxGT("PID-P")
#define MSG_PID_I                           _UxGT("PID-I")
#define MSG_PID_D                           _UxGT("PID-D")
#define MSG_PID_C                           _UxGT("PID-C")
#define MSG_SELECT                          _UxGT("Select")
#define MSG_ACC                             _UxGT("Przyspieszenie")
#define MSG_VX_JERK                         _UxGT("Zryw Vx")
#define MSG_VY_JERK                         _UxGT("Zryw Vy")
#define MSG_VZ_JERK                         _UxGT("Zryw Vz")
#define MSG_VE_JERK                         _UxGT("Zryw Ve")
#define MSG_VMAX                            _UxGT("Vmax ")
#define MSG_VMIN                            _UxGT("Vmin")
#define MSG_VTRAV_MIN                       _UxGT("Vskok min")
#define MSG_AMAX                            _UxGT("Amax")
#define MSG_A_RETRACT                       _UxGT("A-wycofanie")
#define MSG_A_TRAVEL                        _UxGT("A-przesun.")
#define MSG_XSTEPS                          _UxGT("krokiX/mm")
#define MSG_YSTEPS                          _UxGT("krokiY/mm")
#define MSG_ZSTEPS                          _UxGT("krokiZ/mm")
#define MSG_ESTEPS                          _UxGT("krokiE/mm")
#define MSG_E1STEPS                         _UxGT("krokiE1/mm")
#define MSG_E2STEPS                         _UxGT("krokiE2/mm")
#define MSG_E3STEPS                         _UxGT("krokiE3/mm")
#define MSG_E4STEPS                         _UxGT("krokiE4/mm")
#define MSG_TEMPERATURE                     _UxGT("Temperatura")
#define MSG_MOTION                          _UxGT("Ruch")
#define MSG_VOLUMETRIC                      _UxGT("Filament")
#define MSG_VOLUMETRIC_ENABLED              _UxGT("E w mm3")
#define MSG_FILAMENT_DIAM                   _UxGT("Śr. fil.")
#define MSG_CONTRAST                        _UxGT("Kontrast LCD")
#define MSG_STORE_EPROM                     _UxGT("Zapisz w pamieci")
#define MSG_LOAD_EPROM                      _UxGT("Wczytaj z pamieci")
#define MSG_RESTORE_FAILSAFE                _UxGT("Ustaw. fabryczne")
#define MSG_REFRESH                         _UxGT("Odswiez")
#define MSG_WATCH                           _UxGT("Ekran glowny")
#define MSG_PREPARE                         _UxGT("Przygotuj")
#define MSG_TUNE                            _UxGT("Strojenie")
#define MSG_PAUSE_PRINT                     _UxGT("Pauza")
#define MSG_RESUME_PRINT                    _UxGT("Wznowienie")
#define MSG_STOP_PRINT                      _UxGT("Stop")
#define MSG_CARD_MENU                       _UxGT("Menu karty SD")
#define MSG_NO_CARD                         _UxGT("Brak karty")
#define MSG_DWELL                           _UxGT("Uspij...")
#define MSG_USERWAIT                        _UxGT("Oczekiwanie...")
#define MSG_RESUMING                        _UxGT("Wznawianie druku")
#define MSG_PRINT_ABORTED                   _UxGT("Druk przerwany")
#define MSG_NO_MOVE                         _UxGT("Brak ruchu")
#define MSG_KILLED                          _UxGT("Ubity. ")
#define MSG_STOPPED                         _UxGT("Zatrzymany. ")
#define MSG_CONTROL_RETRACT                 _UxGT("Wycofaj mm")
#define MSG_CONTROL_RETRACT_SWAP            _UxGT("Z Wycof. mm")
#define MSG_CONTROL_RETRACTF                _UxGT("Wycofaj  V")
#define MSG_CONTROL_RETRACT_ZLIFT           _UxGT("Skok Z mm")
#define MSG_CONTROL_RETRACT_RECOVER         _UxGT("Cof. wycof. +mm")
#define MSG_CONTROL_RETRACT_RECOVER_SWAP    _UxGT("Z Cof. wyc. +mm")
#define MSG_CONTROL_RETRACT_RECOVERF        _UxGT("Cof. wycof.  V")
#define MSG_AUTORETRACT                     _UxGT("Auto. wycofanie")
#define MSG_FILAMENTCHANGE                  _UxGT("Zmien filament")
#define MSG_INIT_SDCARD                     _UxGT("Inicjal. karty SD")
#define MSG_CNG_SDCARD                      _UxGT("Zmiana karty SD")
#define MSG_ZPROBE_OUT                      _UxGT("Sonda Z za stolem")
#define MSG_BLTOUCH_SELFTEST                _UxGT("BLTouch Self-Test")
#define MSG_BLTOUCH_RESET                   _UxGT("Reset BLTouch")
#define MSG_HOME                            _UxGT("Home")  // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST
#define MSG_FIRST                           _UxGT("first")
#define MSG_ZPROBE_ZOFFSET                  _UxGT("Offset Z")
#define MSG_BABYSTEP_X                      _UxGT("Babystep X")
#define MSG_BABYSTEP_Y                      _UxGT("Babystep Y")
#define MSG_BABYSTEP_Z                      _UxGT("Babystep Z")
#define MSG_ENDSTOP_ABORT                   _UxGT("Blad krancowki")
#define MSG_HEATING_FAILED_LCD              _UxGT("Rozgrz. nieudane")
#define MSG_ERR_REDUNDANT_TEMP              _UxGT("Blad temperatury")
#define MSG_THERMAL_RUNAWAY                 _UxGT("Zanik temp.")
#define MSG_ERR_MAXTEMP                     _UxGT("Err max temp")
#define MSG_ERR_MINTEMP                     _UxGT("Err min temp")
#define MSG_ERR_MAXTEMP_BED                 _UxGT("Err max temp stolu")
#define MSG_ERR_MINTEMP_BED                 _UxGT("Err min temp stolu")
#define MSG_ERR_Z_HOMING                    _UxGT("G28 Z Forbidden")
#define MSG_HALTED                          _UxGT("Drukarka zatrzym.")
#define MSG_PLEASE_RESET                    _UxGT("Prosze zresetowac")
#define MSG_SHORT_DAY                       _UxGT("d") // One character only
#define MSG_SHORT_HOUR                      _UxGT("g") // One character only
#define MSG_SHORT_MINUTE                    _UxGT("m") // One character only
#define MSG_HEATING                         _UxGT("Rozgrzewanie...")
#define MSG_HEATING_COMPLETE                _UxGT("Rozgrzano")
#define MSG_BED_HEATING                     _UxGT("Rozgrzewanie stolu...")
#define MSG_BED_DONE                        _UxGT("Rozgrzano stol")
#define MSG_DELTA_CALIBRATE                 _UxGT("Kalibrowanie Delty")
#define MSG_DELTA_CALIBRATE_X               _UxGT("Kalibruj X")
#define MSG_DELTA_CALIBRATE_Y               _UxGT("Kalibruj Y")
#define MSG_DELTA_CALIBRATE_Z               _UxGT("Kalibruj Z")
#define MSG_DELTA_CALIBRATE_CENTER          _UxGT("Kalibruj środek")

#define MSG_INFO_MENU                       _UxGT("O drukarce")
#define MSG_INFO_PRINTER_MENU               _UxGT("Info drukarki")
#define MSG_INFO_STATS_MENU                 _UxGT("Statystyki")
#define MSG_INFO_BOARD_MENU                 _UxGT("Board Info")
#define MSG_INFO_THERMISTOR_MENU            _UxGT("Thermistory")
#define MSG_INFO_EXTRUDERS                  _UxGT("Ekstrudery")
#define MSG_INFO_BAUDRATE                   _UxGT("Prędkosc USB")
#define MSG_INFO_PROTOCOL                   _UxGT("Protokol")
#define MSG_LIGHTS_ON                       _UxGT("Oswietlenie wl.")
#define MSG_LIGHTS_OFF                      _UxGT("Oswietlenie wyl.")

#if LCD_WIDTH >= 20
  #define MSG_INFO_PRINT_COUNT              _UxGT("Wydrukowano")
  #define MSG_INFO_COMPLETED_PRINTS         _UxGT("Ukończono")
  #define MSG_INFO_PRINT_TIME               _UxGT("Czas druku")
  #define MSG_INFO_PRINT_LONGEST            _UxGT("Najdl. druk")
  #define MSG_INFO_PRINT_FILAMENT           _UxGT("Uzyty fil.")
#else
  #define MSG_INFO_PRINT_COUNT              _UxGT("Wydrukowano")
  #define MSG_INFO_COMPLETED_PRINTS         _UxGT("Ukonczono")
  #define MSG_INFO_PRINT_TIME               _UxGT("Razem")
  #define MSG_INFO_PRINT_LONGEST            _UxGT("Najdl. druk")
  #define MSG_INFO_PRINT_FILAMENT           _UxGT("Uzyty fil.")
#endif

#define MSG_INFO_MIN_TEMP                   _UxGT("Min Temp")
#define MSG_INFO_MAX_TEMP                   _UxGT("Max Temp")
#define MSG_INFO_PSU                        _UxGT("Zasilacz")

#define MSG_DRIVE_STRENGTH                  _UxGT("Siła silnika")
#define MSG_DAC_PERCENT                     _UxGT("Siła %")
#define MSG_DAC_EEPROM_WRITE                _UxGT("Zapisz DAC EEPROM")

#define MSG_FILAMENT_CHANGE_HEADER          _UxGT("ZMIEN FILAMENT")
#define MSG_FILAMENT_CHANGE_OPTION_HEADER   _UxGT("ZMIEN OPCJE:")
#define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE  _UxGT("Ekstruduj wiecej")
#define MSG_FILAMENT_CHANGE_OPTION_RESUME   _UxGT("Wznow drukowanie")

#if LCD_HEIGHT >= 4
  // Up to 3 lines allowed
  #define MSG_FILAMENT_CHANGE_INIT_1          _UxGT("Czekam na ")
  #define MSG_FILAMENT_CHANGE_INIT_2          _UxGT("zmiane filamentu")
  #define MSG_FILAMENT_CHANGE_UNLOAD_1        _UxGT("Czekam na")
  #define MSG_FILAMENT_CHANGE_UNLOAD_2        _UxGT("wyjecie filamentu")
  #define MSG_FILAMENT_CHANGE_INSERT_1        _UxGT("Wloz filament")
  #define MSG_FILAMENT_CHANGE_INSERT_2        _UxGT("i nacisnij przycisk")
  #define MSG_FILAMENT_CHANGE_INSERT_3        _UxGT("aby kontynuowac...")
  #define MSG_FILAMENT_CHANGE_LOAD_1          _UxGT("Czekam na")
  #define MSG_FILAMENT_CHANGE_LOAD_2          _UxGT("wlozenie filamentu")
  #define MSG_FILAMENT_CHANGE_EXTRUDE_1       _UxGT("Czekam na")
  #define MSG_FILAMENT_CHANGE_EXTRUDE_2       _UxGT("ekstruzje filamentu")
  #define MSG_FILAMENT_CHANGE_RESUME_1        _UxGT("Czekam na")
  #define MSG_FILAMENT_CHANGE_RESUME_2        _UxGT("wznowienie druku")
#else // LCD_HEIGHT < 4
  // Up to 2 lines allowed
  #define MSG_FILAMENT_CHANGE_INIT_1          _UxGT("Prosze czekac...")
  #define MSG_FILAMENT_CHANGE_UNLOAD_1        _UxGT("Wysuwanie...")
  #define MSG_FILAMENT_CHANGE_INSERT_1        _UxGT("Wloz i nacisnij prz.")
  #define MSG_FILAMENT_CHANGE_LOAD_1          _UxGT("Ladowanie...")
  #define MSG_FILAMENT_CHANGE_EXTRUDE_1       _UxGT("Ekstruzja...")
  #define MSG_FILAMENT_CHANGE_RESUME_1        _UxGT("Wznowienie...")
#endif // LCD_HEIGHT < 4

#endif // LANGUAGE_PL_H
Further cleanup of comments, partial Doxygen-style Following up on #3231 9 years ago			`/**`
Added gplv3 header to all Marlin files 9 years ago			`* Marlin 3D Printer Firmware`
			`* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]`
			`*`
			`* Based on Sprinter and grbl.`
			`* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm`
			`*`
			`* This program is free software: you can redistribute it and/or modify`
			`* it under the terms of the GNU General Public License as published by`
			`* the Free Software Foundation, either version 3 of the License, or`
			`* (at your option) any later version.`
			`*`
			`* This program is distributed in the hope that it will be useful,`
			`* but WITHOUT ANY WARRANTY; without even the implied warranty of`
			`* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the`
			`* GNU General Public License for more details.`
			`*`
			`* You should have received a copy of the GNU General Public License`
			`* along with this program. If not, see <http://www.gnu.org/licenses/>.`
			`*`
			`*/`

Clean up, move unused to the bottom, add headings 10 years ago			`/**`
			`* Polish`
			`*`
			`* LCD Menu Messages`
Change link to the document documentation/LCDLanguageFont.md moved to http://www.marlinfirmware.org/ at commit 12d0983757d7986a2744136331415fbbb17758c0, but http://www.marlinfirmware.org/ isn't working. 9 years ago			`* See also https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language`
Clean up, move unused to the bottom, add headings 10 years ago			`*`
			`*/`
Split up languages.h, use ISO codes Breaking up languages.h makes it easier to translate. Using language codes makes it easier to select a language and sets the naming standard. 10 years ago			`#ifndef LANGUAGE_PL_H`
			`#define LANGUAGE_PL_H`

Change selection logic another time Automatic selection was to unflexible. Updated documentation Updated language files to new logic and documentation. Updated bdf2u8g.exe 10 years ago			`#define DISPLAY_CHARSET_ISO10646_1`
Introduce - clean - prepae language files 10 years ago
tag the utf-8 strings 8 years ago			`#define WELCOME_MSG MACHINE_NAME _UxGT(" gotowy.")`
			`#define MSG_SD_INSERTED _UxGT("Karta wlozona")`
			`#define MSG_SD_REMOVED _UxGT("Karta usunieta")`
			`#define MSG_LCD_ENDSTOPS _UxGT("Krancow.") // Max length 8 characters`
			`#define MSG_MAIN _UxGT("Menu glowne")`
			`#define MSG_AUTOSTART _UxGT("Autostart")`
			`#define MSG_DISABLE_STEPPERS _UxGT("Wylacz silniki")`
			`#define MSG_AUTO_HOME _UxGT("Pozycja zerowa")`
			`#define MSG_AUTO_HOME_X _UxGT("Home X")`
			`#define MSG_AUTO_HOME_Y _UxGT("Home Y")`
			`#define MSG_AUTO_HOME_Z _UxGT("Home Z")`
			`#define MSG_LEVEL_BED_HOMING _UxGT("Pozycja zerowa")`
			`#define MSG_LEVEL_BED_WAITING _UxGT("Kliknij by rozp.")`
			`#define MSG_LEVEL_BED_NEXT_POINT _UxGT("Nastepny punkt")`
			`#define MSG_LEVEL_BED_DONE _UxGT("Wypoziomowano!")`
			`#define MSG_LEVEL_BED_CANCEL _UxGT("Anuluj")`
			`#define MSG_SET_HOME_OFFSETS _UxGT("Ust. poz. zer.")`
			`#define MSG_HOME_OFFSETS_APPLIED _UxGT("Poz. zerowa ust.")`
			`#define MSG_SET_ORIGIN _UxGT("Ustaw punkt zero")`
			`#define MSG_PREHEAT_1 _UxGT("Rozgrzej PLA")`
			`#define MSG_PREHEAT_1_N MSG_PREHEAT_1 _UxGT(" ")`
			`#define MSG_PREHEAT_1_ALL MSG_PREHEAT_1 _UxGT(" All")`
			`#define MSG_PREHEAT_1_BEDONLY _UxGT("Rozgrzej stol PLA")`
			`#define MSG_PREHEAT_1_SETTINGS _UxGT("Ustaw. rozg. PLA")`
			`#define MSG_PREHEAT_2 _UxGT("Rozgrzej ABS")`
			`#define MSG_PREHEAT_2_N MSG_PREHEAT_2 _UxGT(" ")`
			`#define MSG_PREHEAT_2_ALL MSG_PREHEAT_2 _UxGT(" All")`
			`#define MSG_PREHEAT_2_BEDONLY _UxGT("Rozgrzej stol ABS")`
			`#define MSG_PREHEAT_2_SETTINGS _UxGT("Ustaw. rozg. ABS")`
			`#define MSG_COOLDOWN _UxGT("Chlodzenie")`
			`#define MSG_SWITCH_PS_ON _UxGT("Wlacz zasilacz")`
			`#define MSG_SWITCH_PS_OFF _UxGT("Wylacz zasilacz")`
			`#define MSG_EXTRUDE _UxGT("Ekstruzja")`
			`#define MSG_RETRACT _UxGT("Wycofanie")`
			`#define MSG_MOVE_AXIS _UxGT("Ruch osi")`
			`#define MSG_LEVEL_BED _UxGT("Poziom. stolu")`
			`#define MSG_MOVE_X _UxGT("Przesun w X")`
			`#define MSG_MOVE_Y _UxGT("Przesun w Y")`
			`#define MSG_MOVE_Z _UxGT("Przesun w Z")`
			`#define MSG_MOVE_E _UxGT("Ekstruzja (os E)")`
			`#define MSG_MOVE_01MM _UxGT("Przesun co .1mm")`
			`#define MSG_MOVE_1MM _UxGT("Przesun co 1mm")`
			`#define MSG_MOVE_10MM _UxGT("Przesun co 10mm")`
			`#define MSG_SPEED _UxGT("Predkosc")`
			`#define MSG_BED_Z _UxGT("Stol Z")`
			`#define MSG_NOZZLE _UxGT("Dysza")`
			`#define MSG_BED _UxGT("Stol")`
			`#define MSG_FAN_SPEED _UxGT("Obroty wiatraka")`
			`#define MSG_FLOW _UxGT("Przeplyw")`
			`#define MSG_CONTROL _UxGT("Ustawienia")`
			`#define MSG_MIN LCD_STR_THERMOMETER _UxGT(" Min")`
			`#define MSG_MAX LCD_STR_THERMOMETER _UxGT(" Max")`
			`#define MSG_FACTOR LCD_STR_THERMOMETER _UxGT(" Mnoznik")`
			`#define MSG_AUTOTEMP _UxGT("Auto. temperatura")`
			`#define MSG_ON _UxGT("Wl. ")`
			`#define MSG_OFF _UxGT("Wyl.")`
			`#define MSG_PID_P _UxGT("PID-P")`
			`#define MSG_PID_I _UxGT("PID-I")`
			`#define MSG_PID_D _UxGT("PID-D")`
			`#define MSG_PID_C _UxGT("PID-C")`
			`#define MSG_SELECT _UxGT("Select")`
			`#define MSG_ACC _UxGT("Przyspieszenie")`
			`#define MSG_VX_JERK _UxGT("Zryw Vx")`
			`#define MSG_VY_JERK _UxGT("Zryw Vy")`
			`#define MSG_VZ_JERK _UxGT("Zryw Vz")`
			`#define MSG_VE_JERK _UxGT("Zryw Ve")`
			`#define MSG_VMAX _UxGT("Vmax ")`
			`#define MSG_VMIN _UxGT("Vmin")`
			`#define MSG_VTRAV_MIN _UxGT("Vskok min")`
			`#define MSG_AMAX _UxGT("Amax")`
			`#define MSG_A_RETRACT _UxGT("A-wycofanie")`
			`#define MSG_A_TRAVEL _UxGT("A-przesun.")`
			`#define MSG_XSTEPS _UxGT("krokiX/mm")`
			`#define MSG_YSTEPS _UxGT("krokiY/mm")`
			`#define MSG_ZSTEPS _UxGT("krokiZ/mm")`
			`#define MSG_ESTEPS _UxGT("krokiE/mm")`
			`#define MSG_E1STEPS _UxGT("krokiE1/mm")`
			`#define MSG_E2STEPS _UxGT("krokiE2/mm")`
			`#define MSG_E3STEPS _UxGT("krokiE3/mm")`
			`#define MSG_E4STEPS _UxGT("krokiE4/mm")`
			`#define MSG_TEMPERATURE _UxGT("Temperatura")`
			`#define MSG_MOTION _UxGT("Ruch")`
			`#define MSG_VOLUMETRIC _UxGT("Filament")`
			`#define MSG_VOLUMETRIC_ENABLED _UxGT("E w mm3")`
			`#define MSG_FILAMENT_DIAM _UxGT("Śr. fil.")`
			`#define MSG_CONTRAST _UxGT("Kontrast LCD")`
			`#define MSG_STORE_EPROM _UxGT("Zapisz w pamieci")`
			`#define MSG_LOAD_EPROM _UxGT("Wczytaj z pamieci")`
			`#define MSG_RESTORE_FAILSAFE _UxGT("Ustaw. fabryczne")`
			`#define MSG_REFRESH _UxGT("Odswiez")`
			`#define MSG_WATCH _UxGT("Ekran glowny")`
			`#define MSG_PREPARE _UxGT("Przygotuj")`
			`#define MSG_TUNE _UxGT("Strojenie")`
			`#define MSG_PAUSE_PRINT _UxGT("Pauza")`
			`#define MSG_RESUME_PRINT _UxGT("Wznowienie")`
			`#define MSG_STOP_PRINT _UxGT("Stop")`
			`#define MSG_CARD_MENU _UxGT("Menu karty SD")`
			`#define MSG_NO_CARD _UxGT("Brak karty")`
			`#define MSG_DWELL _UxGT("Uspij...")`
			`#define MSG_USERWAIT _UxGT("Oczekiwanie...")`
			`#define MSG_RESUMING _UxGT("Wznawianie druku")`
			`#define MSG_PRINT_ABORTED _UxGT("Druk przerwany")`
			`#define MSG_NO_MOVE _UxGT("Brak ruchu")`
			`#define MSG_KILLED _UxGT("Ubity. ")`
			`#define MSG_STOPPED _UxGT("Zatrzymany. ")`
			`#define MSG_CONTROL_RETRACT _UxGT("Wycofaj mm")`
			`#define MSG_CONTROL_RETRACT_SWAP _UxGT("Z Wycof. mm")`
			`#define MSG_CONTROL_RETRACTF _UxGT("Wycofaj V")`
			`#define MSG_CONTROL_RETRACT_ZLIFT _UxGT("Skok Z mm")`
			`#define MSG_CONTROL_RETRACT_RECOVER _UxGT("Cof. wycof. +mm")`
			`#define MSG_CONTROL_RETRACT_RECOVER_SWAP _UxGT("Z Cof. wyc. +mm")`
			`#define MSG_CONTROL_RETRACT_RECOVERF _UxGT("Cof. wycof. V")`
			`#define MSG_AUTORETRACT _UxGT("Auto. wycofanie")`
			`#define MSG_FILAMENTCHANGE _UxGT("Zmien filament")`
			`#define MSG_INIT_SDCARD _UxGT("Inicjal. karty SD")`
			`#define MSG_CNG_SDCARD _UxGT("Zmiana karty SD")`
			`#define MSG_ZPROBE_OUT _UxGT("Sonda Z za stolem")`
			`#define MSG_BLTOUCH_SELFTEST _UxGT("BLTouch Self-Test")`
			`#define MSG_BLTOUCH_RESET _UxGT("Reset BLTouch")`
			`#define MSG_HOME _UxGT("Home") // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST`
			`#define MSG_FIRST _UxGT("first")`
			`#define MSG_ZPROBE_ZOFFSET _UxGT("Offset Z")`
			`#define MSG_BABYSTEP_X _UxGT("Babystep X")`
			`#define MSG_BABYSTEP_Y _UxGT("Babystep Y")`
			`#define MSG_BABYSTEP_Z _UxGT("Babystep Z")`
			`#define MSG_ENDSTOP_ABORT _UxGT("Blad krancowki")`
			`#define MSG_HEATING_FAILED_LCD _UxGT("Rozgrz. nieudane")`
			`#define MSG_ERR_REDUNDANT_TEMP _UxGT("Blad temperatury")`
			`#define MSG_THERMAL_RUNAWAY _UxGT("Zanik temp.")`
			`#define MSG_ERR_MAXTEMP _UxGT("Err max temp")`
			`#define MSG_ERR_MINTEMP _UxGT("Err min temp")`
			`#define MSG_ERR_MAXTEMP_BED _UxGT("Err max temp stolu")`
			`#define MSG_ERR_MINTEMP_BED _UxGT("Err min temp stolu")`
			`#define MSG_ERR_Z_HOMING _UxGT("G28 Z Forbidden")`
			`#define MSG_HALTED _UxGT("Drukarka zatrzym.")`
			`#define MSG_PLEASE_RESET _UxGT("Prosze zresetowac")`
			`#define MSG_SHORT_DAY _UxGT("d") // One character only`
			`#define MSG_SHORT_HOUR _UxGT("g") // One character only`
			`#define MSG_SHORT_MINUTE _UxGT("m") // One character only`
			`#define MSG_HEATING _UxGT("Rozgrzewanie...")`
			`#define MSG_HEATING_COMPLETE _UxGT("Rozgrzano")`
			`#define MSG_BED_HEATING _UxGT("Rozgrzewanie stolu...")`
			`#define MSG_BED_DONE _UxGT("Rozgrzano stol")`
			`#define MSG_DELTA_CALIBRATE _UxGT("Kalibrowanie Delty")`
			`#define MSG_DELTA_CALIBRATE_X _UxGT("Kalibruj X")`
			`#define MSG_DELTA_CALIBRATE_Y _UxGT("Kalibruj Y")`
			`#define MSG_DELTA_CALIBRATE_Z _UxGT("Kalibruj Z")`
			`#define MSG_DELTA_CALIBRATE_CENTER _UxGT("Kalibruj środek")`
Delta calibration menu based on http://minow.blogspot.com/index.html#4918805519571907051 To test/enable, uncomment the #define DELTA_CALIBRATION_MENU in Configuration.h 10 years ago
tag the utf-8 strings 8 years ago			`#define MSG_INFO_MENU _UxGT("O drukarce")`
			`#define MSG_INFO_PRINTER_MENU _UxGT("Info drukarki")`
			`#define MSG_INFO_STATS_MENU _UxGT("Statystyki")`
			`#define MSG_INFO_BOARD_MENU _UxGT("Board Info")`
			`#define MSG_INFO_THERMISTOR_MENU _UxGT("Thermistory")`
			`#define MSG_INFO_EXTRUDERS _UxGT("Ekstrudery")`
			`#define MSG_INFO_BAUDRATE _UxGT("Prędkosc USB")`
			`#define MSG_INFO_PROTOCOL _UxGT("Protokol")`
			`#define MSG_LIGHTS_ON _UxGT("Oswietlenie wl.")`
			`#define MSG_LIGHTS_OFF _UxGT("Oswietlenie wyl.")`
Add placeholders for Polish translatable strings 8 years ago
			`#if LCD_WIDTH >= 20`
tag the utf-8 strings 8 years ago			`#define MSG_INFO_PRINT_COUNT _UxGT("Wydrukowano")`
			`#define MSG_INFO_COMPLETED_PRINTS _UxGT("Ukończono")`
			`#define MSG_INFO_PRINT_TIME _UxGT("Czas druku")`
			`#define MSG_INFO_PRINT_LONGEST _UxGT("Najdl. druk")`
			`#define MSG_INFO_PRINT_FILAMENT _UxGT("Uzyty fil.")`
Add placeholders for Polish translatable strings 8 years ago			`#else`
tag the utf-8 strings 8 years ago			`#define MSG_INFO_PRINT_COUNT _UxGT("Wydrukowano")`
			`#define MSG_INFO_COMPLETED_PRINTS _UxGT("Ukonczono")`
			`#define MSG_INFO_PRINT_TIME _UxGT("Razem")`
			`#define MSG_INFO_PRINT_LONGEST _UxGT("Najdl. druk")`
			`#define MSG_INFO_PRINT_FILAMENT _UxGT("Uzyty fil.")`
Add placeholders for Polish translatable strings 8 years ago			`#endif`

tag the utf-8 strings 8 years ago			`#define MSG_INFO_MIN_TEMP _UxGT("Min Temp")`
			`#define MSG_INFO_MAX_TEMP _UxGT("Max Temp")`
			`#define MSG_INFO_PSU _UxGT("Zasilacz")`
Add placeholders for Polish translatable strings 8 years ago
tag the utf-8 strings 8 years ago			`#define MSG_DRIVE_STRENGTH _UxGT("Siła silnika")`
			`#define MSG_DAC_PERCENT _UxGT("Siła %")`
			`#define MSG_DAC_EEPROM_WRITE _UxGT("Zapisz DAC EEPROM")`
Remove filament-change empty lines from languages 8 years ago
tag the utf-8 strings 8 years ago			`#define MSG_FILAMENT_CHANGE_HEADER _UxGT("ZMIEN FILAMENT")`
			`#define MSG_FILAMENT_CHANGE_OPTION_HEADER _UxGT("ZMIEN OPCJE:")`
			`#define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE _UxGT("Ekstruduj wiecej")`
			`#define MSG_FILAMENT_CHANGE_OPTION_RESUME _UxGT("Wznow drukowanie")`
Remove filament-change empty lines from languages 8 years ago
Add placeholders for Polish translatable strings 8 years ago			`#if LCD_HEIGHT >= 4`
Remove filament-change empty lines from languages 8 years ago			`// Up to 3 lines allowed`
tag the utf-8 strings 8 years ago			`#define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Czekam na ")`
			`#define MSG_FILAMENT_CHANGE_INIT_2 _UxGT("zmiane filamentu")`
			`#define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Czekam na")`
			`#define MSG_FILAMENT_CHANGE_UNLOAD_2 _UxGT("wyjecie filamentu")`
			`#define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Wloz filament")`
			`#define MSG_FILAMENT_CHANGE_INSERT_2 _UxGT("i nacisnij przycisk")`
			`#define MSG_FILAMENT_CHANGE_INSERT_3 _UxGT("aby kontynuowac...")`
			`#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Czekam na")`
			`#define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("wlozenie filamentu")`
			`#define MSG_FILAMENT_CHANGE_EXTRUDE_1 _UxGT("Czekam na")`
			`#define MSG_FILAMENT_CHANGE_EXTRUDE_2 _UxGT("ekstruzje filamentu")`
			`#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Czekam na")`
			`#define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("wznowienie druku")`
Add placeholders for Polish translatable strings 8 years ago			`#else // LCD_HEIGHT < 4`
Remove filament-change empty lines from languages 8 years ago			`// Up to 2 lines allowed`
tag the utf-8 strings 8 years ago			`#define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Prosze czekac...")`
			`#define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Wysuwanie...")`
			`#define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Wloz i nacisnij prz.")`
			`#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Ladowanie...")`
			`#define MSG_FILAMENT_CHANGE_EXTRUDE_1 _UxGT("Ekstruzja...")`
			`#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Wznowienie...")`
Add placeholders for Polish translatable strings 8 years ago			`#endif // LCD_HEIGHT < 4`

Split up languages.h, use ISO codes Breaking up languages.h makes it easier to translate. Using language codes makes it easier to select a language and sets the naming standard. 10 years ago			`#endif // LANGUAGE_PL_H`