Marlin 2.0 for Flying Bear 4S/5
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

158 lines
8.8 KiB

/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* Catalan
*
* LCD Menu Messages
* See also https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language
*
*/
#ifndef LANGUAGE_CA_H
#define LANGUAGE_CA_H
#define MAPPER_C2C3 // because of "ó"
#define DISPLAY_CHARSET_ISO10646_1
#define WELCOME_MSG MACHINE_NAME _UxGT(" preparada.")
#define MSG_SD_INSERTED _UxGT("SD detectada.")
#define MSG_SD_REMOVED _UxGT("SD expulsada.")
#define MSG_MAIN _UxGT("Menu principal")
#define MSG_AUTOSTART _UxGT("Inici automatic")
#define MSG_DISABLE_STEPPERS _UxGT("Apagar motors")
#define MSG_AUTO_HOME _UxGT("Home global")
#define MSG_LEVEL_BED_HOMING _UxGT("Homing XYZ")
#define MSG_LEVEL_BED_WAITING _UxGT("Click to Begin")
#define MSG_LEVEL_BED_DONE _UxGT("Leveling Done!")
#define MSG_LEVEL_BED_CANCEL _UxGT("Cancel")
#define MSG_SET_HOME_OFFSETS _UxGT("Set home offsets")
#define MSG_HOME_OFFSETS_APPLIED _UxGT("Offsets applied")
#define MSG_SET_ORIGIN _UxGT("Establir origen")
#define MSG_PREHEAT_1 _UxGT("Preescalfar PLA")
#define MSG_PREHEAT_1_N _UxGT("Preescalfar PLA ")
#define MSG_PREHEAT_1_ALL _UxGT("Preesc. tot PLA")
#define MSG_PREHEAT_1_BEDONLY _UxGT("Preesc. llit PLA")
#define MSG_PREHEAT_1_SETTINGS _UxGT("Configuració PLA")
#define MSG_PREHEAT_2 _UxGT("Preescalfar ABS")
#define MSG_PREHEAT_2_N _UxGT("Preescalfar ABS ")
#define MSG_PREHEAT_2_ALL _UxGT("Preesc. tot ABS")
#define MSG_PREHEAT_2_BEDONLY _UxGT("Preesc. llit ABS")
#define MSG_PREHEAT_2_SETTINGS _UxGT("Configuració ABS")
#define MSG_COOLDOWN _UxGT("Refredar")
#define MSG_SWITCH_PS_ON _UxGT("Switch power on")
#define MSG_SWITCH_PS_OFF _UxGT("Switch power off")
#define MSG_EXTRUDE _UxGT("Extruir")
#define MSG_RETRACT _UxGT("Refredar")
#define MSG_MOVE_AXIS _UxGT("Moure eixos")
#define MSG_MOVE_X _UxGT("Moure X")
#define MSG_MOVE_Y _UxGT("Moure Y")
#define MSG_MOVE_Z _UxGT("Moure Z")
#define MSG_MOVE_E _UxGT("Extrusor")
#define MSG_MOVE_01MM _UxGT("Moure 0.1mm")
#define MSG_MOVE_1MM _UxGT("Moure 1mm")
#define MSG_MOVE_10MM _UxGT("Moure 10mm")
#define MSG_SPEED _UxGT("Velocitat")
#define MSG_NOZZLE _UxGT("Nozzle")
#define MSG_BED _UxGT("Llit")
#define MSG_FAN_SPEED _UxGT("Vel. Ventilador")
#define MSG_FLOW _UxGT("Fluxe")
#define MSG_CONTROL _UxGT("Control")
#define MSG_MIN LCD_STR_THERMOMETER _UxGT(" Min")
#define MSG_MAX LCD_STR_THERMOMETER _UxGT(" Max")
#define MSG_FACTOR LCD_STR_THERMOMETER _UxGT(" Fact")
#define MSG_AUTOTEMP _UxGT("Autotemp")
#define MSG_ON _UxGT("On ")
#define MSG_OFF _UxGT("Off")
#define MSG_PID_P _UxGT("PID-P")
#define MSG_PID_I _UxGT("PID-I")
#define MSG_PID_D _UxGT("PID-D")
#define MSG_PID_C _UxGT("PID-C")
#define MSG_ACC _UxGT("Accel")
#define MSG_VX_JERK _UxGT("Vx-jerk")
#define MSG_VY_JERK _UxGT("Vy-jerk")
#define MSG_VZ_JERK _UxGT("Vz-jerk")
#define MSG_VE_JERK _UxGT("Ve-jerk")
#define MSG_VMAX _UxGT("Vmax ")
#define MSG_VMIN _UxGT("Vmin")
#define MSG_VTRAV_MIN _UxGT("VTrav min")
#define MSG_AMAX _UxGT("Amax ")
#define MSG_A_RETRACT _UxGT("A-retract")
#define MSG_XSTEPS _UxGT("Xpassos/mm")
#define MSG_YSTEPS _UxGT("Ypassos/mm")
#define MSG_ZSTEPS _UxGT("Zpassos/mm")
#define MSG_ESTEPS _UxGT("Epassos/mm")
#define MSG_E1STEPS _UxGT("E1passos/mm")
#define MSG_E2STEPS _UxGT("E2passos/mm")
#define MSG_E3STEPS _UxGT("E3passos/mm")
#define MSG_E4STEPS _UxGT("E4passos/mm")
#define MSG_TEMPERATURE _UxGT("Temperatura")
#define MSG_MOTION _UxGT("Moviment")
#define MSG_VOLUMETRIC _UxGT("Filament")
#define MSG_VOLUMETRIC_ENABLED _UxGT("E in mm3")
#define MSG_FILAMENT_DIAM _UxGT("Fil. Dia.")
#define MSG_CONTRAST _UxGT("Contrast de LCD")
#define MSG_STORE_EPROM _UxGT("Desar a memoria")
#define MSG_LOAD_EPROM _UxGT("Carregar de mem.")
#define MSG_RESTORE_FAILSAFE _UxGT("Rest. emergencia")
#define MSG_REFRESH _UxGT("Refrescar")
#define MSG_WATCH _UxGT("Pantalla Info.")
#define MSG_PREPARE _UxGT("Preparar")
#define MSG_TUNE _UxGT("Calibrar")
#define MSG_PAUSE_PRINT _UxGT("Pausa imp.")
#define MSG_RESUME_PRINT _UxGT("Reprendre imp.")
#define MSG_STOP_PRINT _UxGT("Parar inp.")
#define MSG_CARD_MENU _UxGT("Imprimir de SD")
#define MSG_NO_CARD _UxGT("-Sense targeta SD")
#define MSG_DWELL _UxGT("Repos...")
#define MSG_USERWAIT _UxGT("Esperant usuari..")
#define MSG_RESUMING _UxGT("Reprenent imp.")
#define MSG_PRINT_ABORTED _UxGT("Print aborted")
#define MSG_NO_MOVE _UxGT("Sense moviment.")
#define MSG_KILLED _UxGT("PARADA DE EMERG. ")
#define MSG_STOPPED _UxGT("ATURAT. ")
#define MSG_CONTROL_RETRACT _UxGT("Retreure mm")
#define MSG_CONTROL_RETRACT_SWAP _UxGT("Swap Retreure mm")
#define MSG_CONTROL_RETRACTF _UxGT("Retreure F")
#define MSG_CONTROL_RETRACT_ZLIFT _UxGT("Aixecar mm")
#define MSG_CONTROL_RETRACT_RECOVER _UxGT("DesRet +mm")
#define MSG_CONTROL_RETRACT_RECOVER_SWAP _UxGT("Swap DesRet +mm")
#define MSG_CONTROL_RETRACT_RECOVERF _UxGT("DesRet F")
#define MSG_AUTORETRACT _UxGT("AutoRetr.")
#define MSG_FILAMENTCHANGE _UxGT("Canviar filament")
#define MSG_INIT_SDCARD _UxGT("Iniciant SD")
#define MSG_CNG_SDCARD _UxGT("Canviar SD")
#define MSG_ZPROBE_OUT _UxGT("Z probe out. bed")
#define MSG_HOME _UxGT("Home") // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST
#define MSG_FIRST _UxGT("first")
#define MSG_ZPROBE_ZOFFSET _UxGT("Z Offset")
#define MSG_BABYSTEP_X _UxGT("Babystep X")
#define MSG_BABYSTEP_Y _UxGT("Babystep Y")
#define MSG_BABYSTEP_Z _UxGT("Babystep Z")
#define MSG_ENDSTOP_ABORT _UxGT("Endstop abort")
#define MSG_DELTA_CALIBRATE _UxGT("Delta Calibration")
#define MSG_DELTA_CALIBRATE_X _UxGT("Calibrate X")
#define MSG_DELTA_CALIBRATE_Y _UxGT("Calibrate Y")
#define MSG_DELTA_CALIBRATE_Z _UxGT("Calibrate Z")
#define MSG_DELTA_CALIBRATE_CENTER _UxGT("Calibrate Center")
#endif // LANGUAGE_CA_H