Marlin 2.0 for Flying Bear 4S/5
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

277 lines
9.4 KiB

#
# Marlin Firmware
# PlatformIO Configuration File
#
#################################
#
# STM32F1 Architecture with unified STM32 HAL
#
# Naming Example: STM32F103RCT6
#
# F : Foundation (sometimes High Performance F2/F4)
# 1 : Cortex M1 core
# 03 : Line/Features
# R : 64 or 66 pins (V:100, Z:144, I:176)
# C : 256KB Flash-memory (D:384KB, E:512KB, G:1024KB)
# T : LQFP package
# 6 : -40...85°C (7: ...105°C)
#
#################################
#
# HAL/STM32 Base Environment values
#
[common_stm32]
platform = ststm32@~12.1
build_flags = ${common.build_flags}
-std=gnu++14
-DUSBCON -DUSBD_USE_CDC
-DTIM_IRQ_PRIO=13
-DADC_RESOLUTION=12
build_unflags = -std=gnu++11
src_filter = ${common.default_src_filter} +<src/HAL/STM32> +<src/HAL/shared/backtrace>
extra_scripts = ${common.extra_scripts}
pre:buildroot/share/PlatformIO/scripts/stm32_serialbuffer.py
[common_STM32F103RC]
platform = ${common_stm32.platform}
extends = common_stm32
board = genericSTM32F103RC
monitor_speed = 115200
board_build.core = stm32
board_build.variant = MARLIN_F103Rx
board_build.ldscript = ldscript.ld
extra_scripts = ${common_stm32.extra_scripts}
pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py
buildroot/share/PlatformIO/scripts/stm32_bootloader.py
#
# STM32F103RE
#
[env:STM32F103RE]
platform = ${common_stm32.platform}
extends = common_stm32
board = genericSTM32F103RE
monitor_speed = 115200
#
# STM32F103VE
#
[env:STM32F103VE]
platform = ${common_stm32.platform}
extends = common_stm32
board = genericSTM32F103VE
monitor_speed = 115200
#
# STM32F103ZE
#
[env:STM32F103ZE]
platform = ${common_stm32.platform}
extends = common_stm32
board = genericSTM32F103ZE
monitor_speed = 115200
#
# BigTree SKR Mini V1.1 / SKR Mini E3 & MZ (STM32F103RCT6 ARM Cortex-M3)
#
# STM32F103RC_btt ............. RCT6 with 256K
# STM32F103RC_btt_USB ......... RCT6 with 256K (USB mass storage)
#
[env:STM32F103RC_btt]
platform = ${common_stm32.platform}
extends = common_STM32F103RC
build_flags = ${common_stm32.build_flags} -DDEBUG_LEVEL=0 -DTIMER_SERVO=TIM5
board_build.offset = 0x7000
board_build.encrypt = No
board_build.firmware = firmware.bin
board_upload.offset_address = 0x08007000
[env:STM32F103RC_btt_USB]
extends = env:STM32F103RC_btt
platform = ${common_stm32.platform}
platform_packages = framework-arduinoststm32@https://github.com/rhapsodyv/Arduino_Core_STM32/archive/usb-host-msc-cdc-msc-2.zip
build_unflags = ${common_stm32.build_unflags} -DUSBD_USE_CDC
build_flags = ${env:STM32F103RC_btt.build_flags} ${env:stm32_flash_drive.build_flags}
-DUSBCON
-DUSE_USBHOST_HS
-DUSBD_IRQ_PRIO=5
-DUSBD_IRQ_SUBPRIO=6
-DUSE_USB_HS_IN_FS
-DUSBD_USE_CDC_MSC
#
# MKS Robin (STM32F103ZET6)
# Uses HAL STM32 to support Marlin UI for TFT screen with optional touch panel
#
[env:mks_robin]
platform = ${common_stm32.platform}
extends = common_stm32
board = genericSTM32F103ZE
board_build.core = stm32
board_build.variant = MARLIN_F103Zx
board_build.ldscript = ldscript.ld
board_build.offset = 0x7000
board_build.encrypt = Yes
board_build.firmware = Robin.bin
build_flags = ${common_stm32.build_flags}
-DENABLE_HWSERIAL3 -DTIMER_SERIAL=TIM5
build_unflags = ${common_stm32.build_unflags}
-DUSBCON -DUSBD_USE_CDC
extra_scripts = ${common_stm32.extra_scripts}
pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py
buildroot/share/PlatformIO/scripts/stm32_bootloader.py
buildroot/share/PlatformIO/scripts/mks_encrypt.py
lib_deps =
#
# MKS Robin E3/E3D (STM32F103RCT6) with TMC2209
#
[env:mks_robin_e3]
platform = ${common_stm32.platform}
extends = common_STM32F103RC
build_flags = ${common_stm32.build_flags}
-DDEBUG_LEVEL=0 -DTIMER_SERVO=TIM5
build_unflags = ${common_stm32.build_unflags} -DUSBCON -DUSBD_USE_CDC
monitor_speed = 115200
board_build.offset = 0x5000
board_build.encrypt = Yes
board_build.firmware = Robin_e3.bin
board_upload.offset_address = 0x08005000
debug_tool = stlink
extra_scripts = ${env:STM32F103RC.extra_scripts}
buildroot/share/PlatformIO/scripts/mks_encrypt.py
#
# Creality (STM32F103RET6)
#
[env:STM32F103RET6_creality]
platform = ${common_stm32.platform}
extends = common_stm32
build_flags = ${common_stm32.build_flags} -DMCU_STM32F103RE -DHAL_SD_MODULE_ENABLED -DSS_TIMER=4 -DTIMER_SERVO=TIM5 -DENABLE_HWSERIAL3 -DTRANSFER_CLOCK_DIV=8
board = genericSTM32F103RE
monitor_speed = 115200
board_build.core = stm32
board_build.variant = MARLIN_F103Rx
board_build.offset = 0x7000
board_build.ldscript = ldscript.ld
board_upload.offset_address = 0x08007000
build_unflags = ${common_stm32.build_unflags} -DUSBCON -DUSBD_USE_CDC
extra_scripts = ${common.extra_scripts}
pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py
pre:buildroot/share/PlatformIO/scripts/random-bin.py
buildroot/share/PlatformIO/scripts/stm32_bootloader.py
debug_tool = jlink
upload_protocol = jlink
#
# BigTree SKR Mini E3 V2.0 & DIP / SKR CR6 (STM32F103RET6 ARM Cortex-M3)
#
# STM32F103RE_btt ............. RET6
# STM32F103RE_btt_USB ......... RET6 (USB mass storage)
#
[env:STM32F103RE_btt]
platform = ${common_stm32.platform}
extends = common_stm32
build_flags = ${common_stm32.build_flags} -DMCU_STM32F103RE -DHAL_SD_MODULE_ENABLED -DSS_TIMER=4 -DTIMER_SERVO=TIM5 -DENABLE_HWSERIAL3 -DTRANSFER_CLOCK_DIV=8
board = genericSTM32F103RE
monitor_speed = 115200
board_build.core = stm32
board_build.variant = MARLIN_F103Rx
board_build.offset = 0x7000
board_build.ldscript = ldscript.ld
board_upload.offset_address = 0x08007000
build_unflags = ${common_stm32.build_unflags}
extra_scripts = ${common.extra_scripts}
pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py
buildroot/share/PlatformIO/scripts/stm32_bootloader.py
debug_tool = jlink
upload_protocol = jlink
[env:STM32F103RE_btt_USB]
extends = env:STM32F103RE_btt
platform = ${common_stm32.platform}
platform_packages = framework-arduinoststm32@https://github.com/rhapsodyv/Arduino_Core_STM32/archive/usb-host-msc-cdc-msc-2.zip
build_unflags = ${common_stm32.build_unflags} -DUSBD_USE_CDC
build_flags = ${env:STM32F103RE_btt.build_flags} ${env:stm32_flash_drive.build_flags}
-DUSBCON
-DUSE_USBHOST_HS
-DUSBD_IRQ_PRIO=5
-DUSBD_IRQ_SUBPRIO=6
-DUSE_USB_HS_IN_FS
-DUSBD_USE_CDC_MSC
#
# FLSUN QQS Pro (STM32F103VET6)
# board Hispeedv1
#
[env:flsun_hispeedv1]
platform = ${common_stm32.platform}
extends = common_stm32
build_flags = ${common_stm32.build_flags} -DMCU_STM32F103VE -DSS_TIMER=4 -DENABLE_HWSERIAL3
board = genericSTM32F103VE
board_build.core = stm32
board_build.variant = MARLIN_F103Vx
board_build.ldscript = ldscript.ld
board_build.offset = 0x7000
board_build.firmware = Robin_mini.bin
board_build.encrypt = Yes
board_upload.offset_address = 0x08007000
build_unflags = ${common_stm32.build_unflags} -DUSBCON -DUSBD_USE_CDC
extra_scripts = ${common_stm32.extra_scripts}
pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py
buildroot/share/PlatformIO/scripts/stm32_bootloader.py
buildroot/share/PlatformIO/scripts/mks_encrypt.py
#
# MKS Robin Nano V1.2 and V2
#
[env:mks_robin_nano35]
platform = ${common_stm32.platform}
extends = common_stm32
build_flags = ${common_stm32.build_flags} -DMCU_STM32F103VE -DSS_TIMER=4 -DENABLE_HWSERIAL3
board = genericSTM32F103VE
board_build.core = stm32
board_build.variant = MARLIN_F103Vx
board_build.ldscript = ldscript.ld
board_build.offset = 0x7000
board_build.encrypt = Yes
board_build.firmware = Robin_nano35.bin
board_upload.offset_address = 0x08007000
build_unflags = ${common_stm32.build_unflags} -DUSBCON -DUSBD_USE_CDC
debug_tool = jlink
upload_protocol = jlink
extra_scripts = ${common_stm32.extra_scripts}
pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py
buildroot/share/PlatformIO/scripts/stm32_bootloader.py
buildroot/share/PlatformIO/scripts/mks_encrypt.py
#
# Mingda MPX_ARM_MINI
#
[env:mingda_mpx_arm_mini]
platform = ${common_stm32.platform}
extends = common_stm32
board = genericSTM32F103ZE
board_build.core = stm32
board_build.variant = MARLIN_F103Zx
board_build.ldscript = ldscript.ld
board_build.offset = 0x10000
build_flags = ${common_stm32.build_flags} -DENABLE_HWSERIAL3 -DTIMER_SERIAL=TIM5
build_unflags = ${common_stm32.build_unflags} -DUSBCON -DUSBD_USE_CDC
extra_scripts = ${common_stm32.extra_scripts}
pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py
buildroot/share/PlatformIO/scripts/stm32_bootloader.py
#
# Malyan M200 (STM32F103CB)
#
[env:STM32F103CB_malyan]
platform = ${common_stm32.platform}
extends = common_stm32
board = malyanm200_f103cb
build_flags = ${common_stm32.build_flags}
-DHAL_PCD_MODULE_ENABLED -DDISABLE_GENERIC_SERIALUSB -DHAL_UART_MODULE_ENABLED
src_filter = ${common.default_src_filter} +<src/HAL/STM32>