Marlin 2.0 for Flying Bear 4S/5
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

176 lines
8.9 KiB

/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* Czech
*
* LCD Menu Messages
* See also https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language
*
* Translated by Petr Zahradnik, Computer Laboratory
* Blog and video blog Zahradnik se bavi
* http://www.zahradniksebavi.cz
*
*/
#ifndef LANGUAGE_CZ_H
#define LANGUAGE_CZ_H
#define MAPPER_NON
// Define SIMULATE_ROMFONT to see what is seen on the character based display defined in Configuration.h
//#define SIMULATE_ROMFONT
#define DISPLAY_CHARSET_ISO10646_1
#define WELCOME_MSG MACHINE_NAME " pripraven."
#define MSG_SD_INSERTED "Karta vlozena"
#define MSG_SD_REMOVED "Karta vyjmuta"
#define MSG_MAIN "Hlavni nabidka"
#define MSG_AUTOSTART "Autostart"
#define MSG_DISABLE_STEPPERS "Uvolnit motory"
#define MSG_AUTO_HOME "Domovska pozice"
#define MSG_LEVEL_BED_HOMING "Mereni podlozky"
#define MSG_SET_HOME_OFFSETS "Nastavit ofsety"
#define MSG_SET_ORIGIN "Nastavit pocatek"
#define MSG_PREHEAT_PLA "Zahrat PLA"
#define MSG_PREHEAT_PLA_N MSG_PREHEAT_PLA " "
#define MSG_PREHEAT_PLA_ALL MSG_PREHEAT_PLA " Vse"
#define MSG_PREHEAT_PLA_BEDONLY MSG_PREHEAT_PLA " Podloz"
#define MSG_PREHEAT_PLA_SETTINGS MSG_PREHEAT_PLA " Nast"
#define MSG_PREHEAT_ABS "Zahrat ABS"
#define MSG_PREHEAT_ABS_N MSG_PREHEAT_ABS " "
#define MSG_PREHEAT_ABS_ALL MSG_PREHEAT_ABS " Vse"
#define MSG_PREHEAT_ABS_BEDONLY MSG_PREHEAT_ABS " Podloz"
#define MSG_PREHEAT_ABS_SETTINGS MSG_PREHEAT_ABS " Nast"
#define MSG_COOLDOWN "Zchladit"
#define MSG_SWITCH_PS_ON "Zapnout napajeni"
#define MSG_SWITCH_PS_OFF "Vypnout napajeni"
#define MSG_EXTRUDE "Vytlacit (extr.)"
#define MSG_RETRACT "Zatlacit (retr.)"
#define MSG_MOVE_AXIS "Posunout osy"
#define MSG_LEVEL_BED "Vyrovnat podlozku"
#define MSG_MOVE_X "Posunout X"
#define MSG_MOVE_Y "Posunout Y"
#define MSG_MOVE_Z "Posunout Z"
#define MSG_MOVE_E "Extruder"
#define MSG_MOVE_01MM "Posunout o 0,1mm"
#define MSG_MOVE_1MM "Posunout o 1mm"
#define MSG_MOVE_10MM "Posunout o 10mm"
#define MSG_SPEED "Rychlost"
#define MSG_NOZZLE "Tryska"
#define MSG_BED "Podlozka"
#define MSG_FAN_SPEED "Rychlost vent."
#define MSG_FLOW "Prutok"
#define MSG_CONTROL "Ovladani"
#define MSG_MIN " " LCD_STR_THERMOMETER " Min"
#define MSG_MAX " " LCD_STR_THERMOMETER " Max"
#define MSG_FACTOR " " LCD_STR_THERMOMETER " Fakt"
#define MSG_AUTOTEMP "Autoteplota"
#define MSG_ON "Zap"
#define MSG_OFF "Vyp"
#define MSG_PID_P "PID-P"
#define MSG_PID_I "PID-I"
#define MSG_PID_D "PID-D"
#define MSG_PID_C "PID-C"
#define MSG_ACC "Zrychl"
#define MSG_VXY_JERK "Vxy-jerk"
#define MSG_VZ_JERK "Vz-jerk"
#define MSG_VE_JERK "Ve-jerk"
#define MSG_VMAX "Vmax "
#define MSG_X "x"
#define MSG_Y "y"
#define MSG_Z "z"
#define MSG_E "e"
#define MSG_VMIN "Vmin"
#define MSG_VTRAV_MIN "VTrav min"
#define MSG_AMAX "Amax "
#define MSG_A_RETRACT "A-retrakt"
#define MSG_A_TRAVEL "A-prejezd"
#define MSG_XSTEPS "Xkroku/mm"
#define MSG_YSTEPS "Ykroku/mm"
#define MSG_ZSTEPS "Zkroku/mm"
#define MSG_ESTEPS "Ekroku/mm"
#define MSG_TEMPERATURE "Teplota"
#define MSG_MOTION "Pohyb"
#define MSG_VOLUMETRIC "Filament"
#define MSG_VOLUMETRIC_ENABLED "E na mm3"
#define MSG_FILAMENT_DIAM "Fil. Prum."
#define MSG_CONTRAST "Kontrast LCD"
#define MSG_STORE_EPROM "Ulozit nastaveni"
#define MSG_LOAD_EPROM "Nacist nastaveni"
#define MSG_RESTORE_FAILSAFE "Obnovit vychozi"
#define MSG_REFRESH "Obnovit"
#define MSG_WATCH "Info obrazovka"
#define MSG_PREPARE "Priprava tisku"
#define MSG_TUNE "Doladeni tisku"
#define MSG_PAUSE_PRINT "Pozastavit tisk"
#define MSG_RESUME_PRINT "Obnovit tisk"
#define MSG_STOP_PRINT "Zastavit tisk"
#define MSG_CARD_MENU "Tisknout z SD"
#define MSG_NO_CARD "Zadna SD karta"
#define MSG_DWELL "Uspano..."
#define MSG_USERWAIT "Cekani na uziv..."
#define MSG_RESUMING "Obnovovani tisku"
#define MSG_PRINT_ABORTED "Tisk zrusen"
#define MSG_NO_MOVE "Zadny pohyb."
#define MSG_KILLED "PRERUSENO. "
#define MSG_STOPPED "ZASTAVENO. "
#define MSG_CONTROL_RETRACT "Retrakt mm"
#define MSG_CONTROL_RETRACT_SWAP "Vymena Re.mm"
#define MSG_CONTROL_RETRACTF "Retraktovat V"
#define MSG_CONTROL_RETRACT_ZLIFT "Zvednuti Z mm"
#define MSG_CONTROL_RETRACT_RECOVER "UnRet +mm"
#define MSG_CONTROL_RETRACT_RECOVER_SWAP "S UnRet+mm"
#define MSG_CONTROL_RETRACT_RECOVERF "UnRet V"
#define MSG_AUTORETRACT "AutoRetr."
#define MSG_FILAMENTCHANGE "Vymenit filament"
#define MSG_INIT_SDCARD "Nacist SD kartu"
#define MSG_CNG_SDCARD "Vymenit SD kartu"
#define MSG_ZPROBE_OUT "Sonda Z mimo podl"
#define MSG_POSITION_UNKNOWN "Domu X/Y pred Z"
#define MSG_ZPROBE_ZOFFSET "Z ofset"
#define MSG_BABYSTEP_X "Babystep X"
#define MSG_BABYSTEP_Y "Babystep Y"
#define MSG_BABYSTEP_Z "Babystep Z"
#define MSG_ENDSTOP_ABORT "Endstop abort"
#define MSG_HEATING_FAILED_LCD "Chyba zahrivani"
#define MSG_ERR_REDUNDANT_TEMP "Chyba: REDUNDANTNI TEPLOTA"
#define MSG_THERMAL_RUNAWAY "TEPLOTNI SKOK"
#define MSG_ERR_MAXTEMP "Chyba: VYSOKA TEPLOTA"
#define MSG_ERR_MINTEMP "Chyba: NIZKA TEPLOTA"
#define MSG_ERR_MAXTEMP_BED "Chyba: VYSOKA TEPLOTA PODL."
#define MSG_ERR_MINTEMP_BED "Chyba: NIZKA TEPLOTA PODL."
#define MSG_END_HOUR "hod"
#define MSG_END_MINUTE "min"
#define MSG_HEATING "Zahrivani..."
#define MSG_HEATING_COMPLETE "Zahrati hotovo."
#define MSG_BED_HEATING "Zahrivani podl."
#define MSG_BED_DONE "Podlozka hotova."
#if ENABLED(DELTA_CALIBRATION_MENU)
#define MSG_DELTA_CALIBRATE "Delta Kalibrace"
#define MSG_DELTA_CALIBRATE_X "Kalibrovat X"
#define MSG_DELTA_CALIBRATE_Y "Kalibrovat Y"
#define MSG_DELTA_CALIBRATE_Z "Kalibrovat Z"
#define MSG_DELTA_CALIBRATE_CENTER "Kalibrovat Stred"
#endif // DELTA_CALIBRATION_MENU
#endif // LANGUAGE_CZ_H